With some newer UEFI firmware, not all pci bars get
programmed and we have to assign them ourselfs.
This was already done for memory bars. This change
adds the same for i/o port space, by providing a
ioreservewin() function which can be used to allocate
port space within the parent pci-pci bridge window.
Also, the pci code now allocates the pci config
space i/o ports 0xCF8/0xCFC so userspace needs to
use devpnp to access pci config space now. (see
latest realemu change).
Also, this moves the ioalloc()/iofree() code out
of devarch into port/iomap.c as it can be shared
with the ppc mtx kernel.
This replaces the memory map code for both pc and pc64
kernels with a unified implementation using the new
portable memory map code.
The main motivation is to be robust against broken
e820 memory maps by the bios and delay the Conf.mem[]
allocation after archinit(), so mp and acpi tables
can be reserved and excluded from user memory.
There are a few changes:
new memreserve() function has been added for archinit()
to reserve bios and acpi tables.
upareserve() has been replaced by upaalloc(), which now
has an address argument.
umbrwmalloc() and umbmalloc() have been replaced by
umballoc().
both upaalloc() and umballoc() return physical addresses
or -1 on error. the physical address -1 is now used as
a sentinel value instead of 0 when dealing with physical
addresses.
archmp and archacpi now always use vmap() to access
the bios tables and reserve the ranges. more overflow
checks have been added.
ramscan() has been rewritten using vmap().
to handle the population of kernel memory, pc and pc64
now have pmap() and punmap() functions to do permanent
mappings.
the previous mkfile had a sneaky hack that would use
sed to delete the first 2 lines of hex output to strip
the 32 byte long a.out header for apbootstrap and rebootcode.
use 8l -H3 flag to strip the header from the output file.
replace machine specific userinit() by a portable
implemntation that uses kproc() to create the first
process. the initcode text is mapped using kmap(),
so there is no need for machine specific tmpmap()
functions.
initcode stack preparation should be done in init0()
where the stack is mapped and can be accessed directly.
replacing the machine specific userinit() allows some
big simplifications as sysrfork() and kproc() are now
the only callers of newproc() and we can avoid initializing
fields that we know are being initialized by these
callers.
rename autogenerated init.h and reboot.h headers.
the initcode[] and rebootcode[] blobs are now in *.i
files and hex generation was moved to portmkfile. the
machine specific mkfile only needs to specify how to
build rebootcode.out and initcode.out.
the only architecture dependence of devether was enabling interrupts,
which is now done at the end of the driver's reset() function now.
the wifi stack and dummy ethersink also go to port/.
do the IRQ2->IRQ9 hack for pc kernels in intrenabale(), so not
every caller of intrenable() has to be aware of it.
there isnt much of a point in keep maintaining separate
kernel configurations for terminal and cpu kernels as
the role can be switched with service=cpu boot parameter.
to make stuff cosistent, we will just have one "pc" kernel
and one "pc64" kernel configuration now.
Wnode gets two new counters: txcount and txerror
and actrate pointer that will be between minrate
and maxrate.
driver should use actrate instead of maxrate for
transmission when it can provide error feedback.
when a driver detects a transmission failed, it calls
wifitxfail() with the original packet. wifitxfail() then
reduces wn->actrate.
every 256th packet, we optimistically increase wn->actrate
before transmitting.
forkret() labels the instructions that can raise exceptions
so they can be handled in trap(). this can happen when
segment descriptors get invalidated.
the channel= plan9.ini parameter isnt needed anymore as we now
hop the channels to scan for beacons. the status is also indicated
with the link led :-)
handle all these flags on packet transmission like RTS for big
packets and sending data packets to the AP instead of broadcasting
everything.
properly setup bss hardware node table and filtering. now promisc
mode is only used when requested.
handle deauth message from ap.
increase node table to 32 entries.
