Ori Bernstein had Sunrise Point-H USB 3.0 xHCI Controller that would mysteriously
crash on the 5th ENABLESLOT command. This was reproducable by even just allocating
slots in a loop right after init.
It turns out, the 1.2 spec extended the Max Scratchpad Buffers in HCSPARAMS2 so our
driver would not allocate enougth scratchpad buffers and controller firmware would
crash once it went beyond our allocated scratchpad buffer array.
This change also fixes:
- ignore bits 16:31 in PAGESIZE register
- preserve bits 10:31 in the CONFIG register
- handle ADDESSDEV command failure (so it can be retried)
attached is a patch to fix receive in the 8169 chip on my thinkpad
A485. i'm not sure why, but the same thing was done in 3d56a0fc4645
for Macv45.
nick
some control transactions can confuse the xhci controller so
much that it even fails to respond to command abort or STOPEP
control command. with no way for us to abort the transaction
but a full controller reset.
we give the controller 5 seconds to abort our initial
transaction and if that fails we wake the recover process
to reset the controller.
thanks mischief for testing.
tested on a t43 with igfx and a 1600x1200 t43p screen
what works: lvds, blanking
what doesn't: hwgc (not visible), snarfing edid
untested: vga
based on realemu traces.
all screen implementations use a Memimage* internally
for the framebuffer, so we can return a shared reference
to its Memdata structure in attachscreen() instead of
a framebuffer data pointer.
this eleminates the softscreen == 0xa110c hack as we
always use shared Memdata* now.
the FCA registers 0x28, 0x2C have been reassigned to
to FEXTNVM on i217, i218 and i219 so add Fnofca flag
and avoid writing the registers.
make link detection more robust on i217 by delaying the
phy status read after link status change by 150ms. we'd
otherwise get a "phy wedged" (power saving state?) and
not update the link status until the next link change.
the max packet size is configured in 1K increments on these chips,
which can result in the card receiving a 10K packet but the
driver having only allocated 9.5K of buffer. this actually caued
pool corruption with i210, i217, i218, i219, i350.
for 82598 and x550, we explicitely round rbsz to avoid similar bugs
in the future, even tho the Rbsz constant was already a multiple of
1K and is not affected by the bug.
instead of having application processors spin in mpshutdown()
with mmu on, and be subject to reboot() overriding kernel text
and modifying page tables, park the application processors in
rebootcode idle loop with the mmu off.
when clering smi enable bits in the legacy control/status register,
preserve the reserved bits. clear the RW1C bits.
linux code claims intel xhci controller needs a 1ms delay before
accessing any register after reset.
pcienable() puts a device in fully powered on state
and does some missing initialization that UEFI might
have skipped such as I/O and Memory requests being
disabled.
pcidisable() is ment to shutdown the device, but
currently just disables dma to prevent accidents.
on Samsung ATIV Smart PC Pro XE00T1C-A01CL, the EHCI handoff
causes the system to freeze in UEFI mode as soon as we assert
the os semaphore bit.
until a general solution is found, provide these parameters to
disable the handoff for now as it seems to otherwise work fine.
the end condition port < offset+n could never become
false when offset truncated to 32 bit signed port is
negative. change the condition variables to unsigned
int.
msr's are not byte addressible, so advance reads by
one instead of 8.
nobody passes us the "RSD PTR " address when doing multiboot/kexec
on UEFI systems. so we search for it manually in the ACPI reserved
area as indicated in the e820 memory map.
this driver makes regions of physical memory accessible as a disk.
to use it, ramdiskinit() has to be called before confinit(), so
that conf.mem[] banks can be reserved. currently, only pc and pc64
kernel use it, but otherwise the implementation is portable.
ramdisks are not zeroed when allocated, so that the contents are
preserved across warm reboots.
to not waste memory, physical segments do not allocate Page structures
or populate the segment pte's anymore. theres also a new SG_CHACHED
attribute.
