Tilting allows using left/right rotated or invetrted display orientation.
This can be changed at runtime such as: echo tilt right > /dev/vgactl
This removes the old panning and vga overlays as they are only implemented
with some ancient vga controllers.
The new pci code is moved to port/pci.[hc] and shared by
all ports.
Each port has its own PCI controller implementation,
providing the pcicfgrw*() functions for low level pci
config space access. The locking for pcicfgrw*() is now
done by the caller (only port/pci.c).
Device drivers now need to include "../port/pci.h" in
addition to "io.h".
The new code now checks bridge windows and membars,
while enumerating the bus, giving the pc driver a chance
to re-assign them. This is needed because some UEFI
implementations fail to assign the bars for some devices,
so we need to do it outselfs. (See pcireservemem()).
While working on this, it was discovered that the pci
code assimed the smallest I/O bar size is 16 (pcibarsize()),
which is wrong. I/O bars can be as small as 4 bytes.
Bit 1 in an I/O bar is also reserved and should be masked off,
making the port mask: port = bar & ~3;
The swcursor used a 32x32 image for saving/restoring
screen contents for no reason.
Add a doflush argument to swcursorhide(), so that
disabling software cursor with a double buffered
softscreen is properly hidden. The doflush parameter
should be set to 0 in all other cases as swcursordraw()
will flushes both (current and previours) locations.
Make sure swcursorinit() and swcursorhide() clear the
visibility flag, even when gscreen is nil.
Remove the cursor locking and just do everything within
the drawlock. All cursor functions such as curson(),
cursoff() and setcursor() will be called drawlock
locked. This also means &cursor can be read.
Fix devmouse cursor reads and writes. We now have the
global cursor variable that is only modified under
the drawlock. So copy under drawlock.
Move the pc software cursor implementation into vgasoft
driver, so screen.c does not need to handle it as
a special case.
Remove unused functions such as drawhasclients().
previously, we had to maintain 3 sets of pci vid/did's:
1) in /lib/vgadb for detection
2) in the userspace driver in aux/vga
3) in the kernel mode driver
this change makes the kernel mode driver more dumb in
the cases where possible. we let userspace do the pci
enumeration and if needed, it can set the pci address
of the vga card. kernel mode drivers can assume to get
the right pci device passed in scr->pci for enable()
and linear() functions and just do very basic sanity
checking before mapping framebuffer and mmio regions.
vgalinearpciid() was removed as userspace is responsible
to pick pci device.
theres a new vgactl message "pcidev" where userspace
can set the bus address. we initialize scr->pci in
vgareset() to the first pci graphics card found. this
should cover cases when an old aux/vga binary is used
that doesnt use the new pcidev message.
userspace drivers will now use the pci device that got
a match from /lib/vgadb and skip ther own enumeration.
this way, vga cards can be made to work by simply adding
an entry in vgadb with no need to modify userspace or
kernelspace drivers. this is not always possible if
the driver derives information from the specific card
model.
allow the shadow framebuffer (softscreen) to be used with any
vga driver, not just vesa. this removes the ugly scr->paddr = 0
hack employed by vesa driver to force softscreen and adds a
softscreen vgactl message that can switch the feature on and off
at runtime.
softscreen can greatly improve graphics performance when bus
reads are slow even tho it disables hardware acceleration.
