The change 775a4bea43
"libsec: various changes to tls"
...
4. simply prf code...
... broke the TLS1.0 prf function, missing the fact
that the prf ouput for sha1 and md5 need to be
xored together.
pci uarts are detected late and usually do not contain
the console= parameter logic.
for these, we can just enable them when devuart is reset,
and replay the boot messages once enabled.
this is usefull as it allows us to use these uarts for
kernel debugging in interrupt context.
MBC3 write switches on a>>13, so the RTC register is 5 (0xA000-0xBFFF).
Mask off upper bits of DH register when updating the timer. Only the
lowest bit is part of the day counter.
Use uint for x in timerforward() so that we don't set negative values
for timer registers if it happens to overflow.
Update timer and then latch rather than the other way around.
Otherwise, timer remains static and will overflow after 512 days.
Although git9 always uses the same commit date and author date, other
implementation do make a distinction. Since commit date is more
representative of the commit graph order, use this as a traversal hint
instead of author date.
If the server only supports the dumb protocol, the first 4 bytes of
response will be the initial part of the hash of the first ref.
The http-protocol documentation says that we should fall back to the
dumb protocol when we don't see a content-type of
application/x-$servicename-advertisement. Check this before
attempting to read a smart git packet.
We now keep track of 3 sets during traversal:
- keep: commits we've reached from head commits
- drop: commits we've reached from tail commits
- skip: ancestors of commits in both 'keep' and 'drop'
Commits in 'keep' and/or 'drop' may be added later to the 'skip' set
if we discover later that they are part of a common subgraph of the
head and tail commits.
From these sets we can calculate the commits we are interested in:
lca commits are those in 'keep' and 'drop', but not in 'skip'.
findtwixt commits are those in 'keep', but not in 'drop' or 'skip'.
The "LCA" commit returned is a common ancestor such that there are no
other common ancestors that can reach that commit. Although there can
be multiple commits that meet this criteria, where one is technically
lower on the commit-graph than the other, these cases only happen in
complex merge arrangements and any choice is likely a decent merge
base.
Repainting is now done in paint() directly. When we find a boundary
commit, we switch our paint color to 'skip'. 'skip' painting does
not stop when it hits another color; we continue until we are left
with only 'skip' commits on the queue.
This fixes several mishandled cases in the current algorithm:
1. If we hit the common subgraph from tail commits first (if the tail
commit was newer than the head commit), we ended up traversing the
entire commit graph. This is because we couldn't distinguish
between 'drop' commits that were part of the common subgraph, and
those that were still looking for it.
2. If we traversed through an initial part of the common subgraph from
head commits before reaching it from tail commits, these commits
were returned from findtwixt even though they were also reachable
from tail commits.
3. In the same case as 2, we might end up choosing an incorrect
commit as the LCA, which is an ancestor of the real LCA.
When loading an acme dump file that contains a window with only one
tag line, there are cases where acme hides that window (i.e. not even
its tag is visible).
The following commands reproduce the issue:
% ed <<EOE
1
i
/tmp
/lib/font/bit/pelm/unicode.8.font
/lib/font/bit/pelm/unicode.8.font
0
f 0 5 175 175 1
5 40 175 1 0 /sys/src/cmd/acme/ Del Snarf Get | Look
f 0 4 330 330 3
4 27 330 1 0 /tmp/ Del Snarf Get | Look
.
,w /tmp/test.dump
Q
EOE
% window -dx 900 -dy 600 'acme -l /tmp/test.dump'
This issue was introduced in commit 47b7dc5ccd.
This avoids ipconfig having to explicitely specify the tag
when we want to set route type, as the tag can be provided
implicitely thru the "tag" command.
This adds a new route "t"-flag that enables network address translation,
replacing the source address (and local port) of a forwarded packet to
one of the outgoing interface.
The state for a translation is kept in a new Translation structure,
which contains two Iphash entries, so it can be inserted into the
per protocol 4-tuple hash table, requiering no extra lookups.
Translations have a low overhead (~200 bytes on amd64),
so we can have many of them. They get reused after 5 minutes
of inactivity or when the per protocol limit of 1000 entries
is reached (then the one with longest inactivity is reused).
The protocol needs to export a "forward" function that is responsible
for modifying the forwarded packet, and then handle translations in
its input function for iphash hits with Iphash.trans != 0.
This patch also fixes a few minor things found during development:
- Include the Iphash in the Conv structure, avoiding estra malloc
- Fix ttl exceeded check (ttl < 1 -> ttl <= 1)
- Router should not reply with ttl exceeded for multicast flows
- Extra checks for icmp advice to avoid protocol confusions.
the bug happens when we did the fast exit thru "done" label,
where we would not make sure that theres space in the buffer
for the NUL terminator.
instead, avoid the fast exit and always do the final
adjbuf() that makes sure we have space for the NUL terminator.
remove the pointless pb checks, they'r wrong (should'v
been bp >= buf+bufsz) and adjbuf() already makes sure this
can never happen.
EDID 1.3 section 5 gives a table describing the priority order of
timing information. Use this ordering when constructing the EDID
mode list.
Since aux/vga selects the first mode in the modelist that matches
the given size, it will now select the mode of that size with the
highest preference. Or, if you set vgasize=auto (or some other
string without an 'x'), aux/vga will select the Preferred Detailed
Timing.
This should make it unnecessary to modify vgadb in many cases.
when reverting files, 'cp -x' updates the mtime
to the time the file was committed. this prevents
'mk' from rebuilding the file, leading to stale
builds.
this change touches the file on revert, so that
we rebuild the file.
Use an RWlock so readers can work in parallel in
the common case (no cache updates).
When a reader needs to update the cache to add
a new learned source mac address, it will drop
the rlock and aquire the wlock to do the update.
When we get a read error, we now unbind the
port to avoid further packets being forwarded
to it.
This is usefull for hotplug ethernet devices
like usb ones or tunnels.
Simplify the unbind, getting rid of the refcount,
by having only the reader proc call freeport().
Avoid holding the bridge lock while opening
and closing ethernet/tunnel device files during
bind and unbind.
Dont use smalloc() (especially when holding locks).
Allocate bridges dynamically, so we do not waste
the memory when we do not need them.
Reject non-hostowner from allocating new bridges.
Use consistent naming: port -> port
Use consistent comment style: // -> /* */
The altsetting was handled only for a single endpoint
(per interface number), but has to be handled for each
endpoint (per interface *AND* altsetting number).
A multi function device (like a disk) can have
multiple interfaces, all with the same interface number
but varying altsetting numbers and each of these
interfaces would list distict endpoint configurations.
Multiple interfaces can even share some endpoints (they
use the same endpoint addresses), but
we still have to duplicate them for each
interface+altsetting number (as they'r part of
actually distict interfaces with distict endpoint
configurations).
It is also important to *NOT* make endpoints bi-directional
(dir == Eboth) when only one direction is used in a
interface/altsetting and the other direction in another.
This was the case for nusb/disk with some seagate drive
where endpoints where shared between the UAS and
usb storage class interface (but with distict altsettings).
The duplicate endpoints (as in using the same endpoint address)
are chained together by a next pointer and the head
is stored in Usbdev.ep[addr], where addr is the endpoint
address. These Ep structures will have distinct endpoint
numbers Ep.id (when they have conflicting types), but all
will share the endpoint address (lower 4 bits of the
endpoint number).
The consequence is that all of the endpoints configuration
(attributes, interval) is now stored in the Ep struct and
no more Altc struct is present.
A pointer to the Ep struct has to be passed to openep()
for it to configure the endpoint.
For the Iface struct, we will now create multiple of them:
one for each interface *AND* altsetting nunber,
chained together on a next pointer and the head being
stored in conf->iface[ifaceid].
--
cinap
Wlock()'ing the ifc causes a deadlock with Medium
bind/unbind as the routine can walk /net, while
ndb/dns or ndb/cs are currently blocked enumerating
/net/ipifc/*.
The fix is to have a fake medium, called "unbound",
that is set temporarily during the call of Medium
bind and unbind.
That way, the interface rwlock can be released while
bind/unbind is in progress.
The ipifcunbind() routine will refuse to unbind a
ifc that is currently assigned to the "unbound"
medium, preventing any accidents.
Pattern matching with lists no longer works:
; ls /tmp/*.c
/tmp/npage.c
/tmp/pagedebug.c
/tmp/pageold.c
/tmp/scheduler.c
/tmp/writeimagetest.c
; ls /tmp/^(*.c)
ls: /tmp/*.c: '/tmp/*.c' directory entry not found
; 9fs dump
; bind /n/dump/2021/1002/amd64/bin/rc /bin/rc
; rc
; ls /tmp/^(*.c)
/tmp/npage.c
/tmp/pagedebug.c
/tmp/pageold.c
/tmp/scheduler.c
/tmp/writeimagetest.c
the fix:
we have to propagate the glob attribute thru lists
as well. before it was only handled for single words
and propagated thru concatenations...
the Xglob instruction now works on list, and we
propagate the glob attribute thru PAREN and WORDS
and ARGLIST nodes.
also, avoid using negative numbers for the Tree.glob
field as char might be unsigned on some targets.
2021-08-14 17:50 GMT, kemal <kemalinanc8@gmail.com>:
> 1- as driver reads 8 bytes from nvm instead of 6 so fw doesn't
> spit us an ADVANCED_SYSASSERT, it was reading 2 more
> extra bytes. apparently those 2 extra bytes were put to
> the first 2 bytes of our buffer, so we got to skip that.
some more thoughts on this, i think as 0x15*2 is not multiple
of 8, fw rounds the offset to 0x14*2. i have touched to code
to read data from 0x14*2 then ignore the first 2 bytes, just
so it's not confusing. if this causes mac to be read wrong again,
report.
also, some more changes:
1. set the fwname at iwlpci, just to align the behavior with 8000+.
this is a cosmetic change.
2. i have discovered that on device boot/reset/shutdown functions,
our driver slept way much more than it should. the reason for that is,
driver used the function delay() on places where it needs to use
microdelay() instead. i have modified the code to use microdelay().
wpi likely needs similar changes too. i hope that this does not
break the code.
3. zzz a bit more on tx/rx scheduler shutdowns and niclock.
4. openbsd's iwm and linux apparently does not check if ownership
was obtained anymore in their handover functions. instead they
just loop until the hw is ready. aligned the behavior.
see linux commit: 289e5501c3141191dd830957f1d764d3dc14a54f
5. don't take antenna masks from nvm. it's apparently empty
in some cards from 7k family. we will rely on what the fw file gives
us.
6. when the calibration is completed, wakeup the proc that runs
postboot. otherwise that thing sleeps for like 2 whole seconds
even if calibration completed earlier.
i honestly don't think any of these changes will fix 7260 not
being able to get calibration results, but i don't see anything
wrong at all in postboot7000 at this point. i will just hope
these changes somehow make it get calibration results.
NOTE: latest patch on the 9front ml, posted Mon, 14 Feb 2022 15:26:55 +0300
(non functional as of yet)
