The new pci code is moved to port/pci.[hc] and shared by
all ports.
Each port has its own PCI controller implementation,
providing the pcicfgrw*() functions for low level pci
config space access. The locking for pcicfgrw*() is now
done by the caller (only port/pci.c).
Device drivers now need to include "../port/pci.h" in
addition to "io.h".
The new code now checks bridge windows and membars,
while enumerating the bus, giving the pc driver a chance
to re-assign them. This is needed because some UEFI
implementations fail to assign the bars for some devices,
so we need to do it outselfs. (See pcireservemem()).
While working on this, it was discovered that the pci
code assimed the smallest I/O bar size is 16 (pcibarsize()),
which is wrong. I/O bars can be as small as 4 bytes.
Bit 1 in an I/O bar is also reserved and should be masked off,
making the port mask: port = bar & ~3;
the only architecture dependence of devether was enabling interrupts,
which is now done at the end of the driver's reset() function now.
the wifi stack and dummy ethersink also go to port/.
do the IRQ2->IRQ9 hack for pc kernels in intrenabale(), so not
every caller of intrenable() has to be aware of it.
the driver doesnt implement multicast filter, but just turns
on promiscuous mode when a multicast address is added. but this
breaks when one actually enables and then disables promiscuous
mode with say, running snoopy.
we have to keep promisc mode active as long as multicast table
is not empty.
catch the error() that can be thrown by sleep() and tsleep()
in kprocs.
add missing pexit() calls.
always set the freemem argument to pexit() from kproc otherwise
the process gets added to the broken list.
the diver used to skip auto negotiation when
auto-negotiation enable (bit 12 in command register)
was clear.
setting the bit now, which makes auto negotiation work.
we skip auto negotiation only when it was already enabled
and status regiser indicates completion (bit 9).
