inst: get rid of ppp configuration

rc/bin/inst/confignet

@@ -9,7 +9,7 @@ case checkready checkdone
 		export confignet
 		exit
 	}
-	if(~ $netisfrom ppp ether){
+	if(~ $netisfrom ether){
 		x=config$netisfrom
 		$x=done
 		./config$netisfrom checkdone
@@ -22,48 +22,18 @@ case checkready checkdone
 	exit
 
 case go
-	devs=''
-	if(test -d /net/ether0 >[2]/dev/null)
-		devs=$devs^ether
-	if(test -f /dev/eia? >[2]/dev/null)
-		devs=$devs^ppp
-	
-	switch($devs){
-	case ''
+	if(! test -d /net/ether0 >[2]/dev/null){
 		echo
-		echo 'Could not find ethernet card nor serial port nor modem.'
+		echo 'Could not find ethernet card.'
 		echo
 		netisfrom=none
-	
-	case ppp
+		export netisfrom
+		exit
+	}
 	echo
-		echo 'No ethernet card was detected, but there is a serial port or modem.'
-		echo 'We will configure PPP.'
-		echo
-		netisfrom=ppp
-	
-	case ether
-		echo
-		echo 'No serial port or modem detected, but there is an ethernet card.'
 	echo 'We will configure the ethernet.'
 	echo
 	netisfrom=ether
-	
-	case etherppp
-		echo
-		echo 'You can connect to the internet via'
-		echo 'a local ethernet or a dial-up PPP connection.'
-		echo
-		prompt -d ether 'Interface to use' ether ppp
-		netisfrom=$rd
-	}
-	
 	export netisfrom
-	if(~ $netisfrom ether ppp)
-		exec ./config$netisfrom go
-
-	if(! test -f /srv/cs && ! test -f /net/cs)
-		ndb/cs
-	if(! test -f /srv/dns && ! test -f /net/dns)
-		ndb/dns -r
+	exec ./configether go
 }

rc/bin/inst/configppp

@@ -1,63 +0,0 @@
-#!/bin/rc
-
-# desc: configure your internet connection via ppp over a modem
-
-switch($1) {
-case go
-	devs=`{ls -p /dev/eia? >[2]/dev/null}
-	if(~ $#devs 0) {
-		echo 'No serial port found; this can''t happen.'	# because confignet checks
-		exit
-	}
-	
-	# not going to use the mouse for PPP
-	if(~ eia^$mouseport $devs)
-		devs=`{echo $devs | sed 's/eia'^$mouseport^'//'}
-	
-	if(~ $#devs 0) {
-		echo 'The only serial port you have is your mouse.'
-		echo 'Cannot configure PPP.'
-		exit
-	}
-	
-	echo
-	echo 'Please choose the serial port or modem to use to connect to your ISP.'
-	echo
-	for(i in $devs) {
-		n=`{echo $i | sed 's/eia//'}
-		n=`{hoc -e 1+$n}
-		echo '	'^$i^'(Windows'' COM'^$n^')'
-	}
-	echo
-	prompt 'Serial device' $devs
-	pppdev=$rd
-	
-	echo
-	echo 'Pick a baud rate for the PPP connection.'
-	echo
-	prompt -d 115200 'Baud rate'
-	pppbaud=$rd
-	
-	echo
-	echo 'You can specify your dialup phone number, username, and password,'
-	echo 'or you can log in manually by typing the modem commands yourself.'
-	echo
-	prompt 'Dialing method' auto manual
-	pppmethod=$rd
-	
-	switch($pppmethod){
-	case auto
-		prompt 'PPP phone number'; pppphone=$rd
-		prompt 'PPP phone username'; pppuser=$rd
-		prompt 'PPP phone password'; ppppasswd=$rd
-	}
-	
-	export pppdev pppmethod pppphone ppppasswd pppuser pppbaud
-	exec ./startppp go
-
-case checkdone
-	if(! ~ $#pppmethod 1 || ! test -f /dev/$pppdev){
-		configppp=notdone
-		export configppp
-	}
-}

rc/bin/inst/startppp

@@ -1,30 +0,0 @@
-#!/bin/rc
-
-# desc: activate ppp connection
-# prereq: configppp
-
-switch($1) {
-case checkready checkdone
-	if (isipdevup '^pkt[0-9]')
-		startppp=done
-	export startppp
-
-case go
-	if(isipdevup '^pkt[0-9]')
-		exit
-
-	ctl=$pppdev^ctl
-	echo b115200 >$ctl
-
-	switch($pppmethod) {
-	case manual
-		echo 
-		echo 'Please dial the modem, and type ctl-d when PPP has started.'
-		echo 'You may need to type ctl-m to send modem commands.'
-		echo
-		ip/ppp -f -u -b b^$pppbaud -p /dev/^$pppdev
-
-	case auto
-		ip/ppp -f -b b^$pppbaud -p /dev/^$pppdev -s $"pppuser:$"ppppasswd -t 'atdt'^$"pppphone
-	}
-}