plan9fox/sys/man/3/ether

124 lines
3.1 KiB
Plaintext
Raw Normal View History

.TH ETHER 3
.SH NAME
ether \- Ethernet device
.SH SYNOPSIS
.nf
.B bind -a #l\fIn\fP /net
.BI /net/ether n /clone
.BI /net/ether n /addr
.BI /net/ether n /ifstats
.BI /net/ether n /stats
.BI /net/ether n /[0-7]
.BI /net/ether n /[0-7]/data
.BI /net/ether n /[0-7]/ctl
.BI /net/ether n /[0-7]/ifstats
.BI /net/ether n /[0-7]/stats
.BI /net/ether n /[0-7]/type
.fi
.SH DESCRIPTION
The Ethernet interface,
.BI /net/ether n\f1,
is a directory
containing subdirectories, one for each distinct Ethernet packet type,
and
.BR clone ,
.BR addr ,
.BR ifstats ,
and
.B stats
files.
.B stats
and
.B ifstats
are the same as in the subdirectories (see below).
Reading
.B addr
returns the MAC address of this interface in hex with no punctuation
and no trailing newline.
The number
.I n
(optional in the bind)
is the device number of the card, permitting multiple cards to be used on a single machine.
.PP
Each directory contains files to control the associated connection,
receive and send data,
and supply statistics.
Incoming Ethernet packets are demultiplexed by packet type and passed up
the corresponding open connection.
Reading from the
.B data
file reads packets of that type arriving from the network.
A read will terminate at packet boundaries.
Each write to the
.B data
file causes a packet to be sent.
The Ethernet address of the interface is inserted into
the packet header as the source address.
.PP
A connection is assigned to a packet type by opening its
.B ctl
file and
writing
.B connect
.I n
where
.I n
is a decimal integer constant identifying the Ethernet packet type.
A type of \-1 enables the connection to receive copies of packets of
all types. A type of \-2 enables the connection to receive copies of
the first 64 bytes of packets of all types.
If multiple connections are assigned to a given packet type
a copy of each packet is passed up each connection.
.PP
Some interfaces also accept unique options when written to the
.I ctl
(or
.IR clone )
file; see the description of
.I wavelan
in
.IR plan9.ini (8).
.PP
Reading the
.B ctl
file returns the decimal index of the associated connection, 0 through 7.
Reading the
.B type
file returns the decimal value of the assigned Ethernet packet type.
Reading the
.B stats
file returns status information such as the Ethernet address of the
card and general statistics, independent of the interface;
.B ifstats
contains device-specific data and statistics about the card.
.PP
An interface normally receives only those packets whose
destination address is that of the interface or is the
broadcast address,
.BR ff:ff:ff:ff:ff:ff .
The interface can be made to receive all packets on the
network by writing the string
.B promiscuous
to the
.B ctl
file.
The interface remains promiscuous until the control file is
closed.
The extra packets are passed up connections only of types \-1
and \-2.
.PP
Writing packets to the
.B data
file automatically fills the
source address before sending. To allow implementations of
layer 2 bridges like
.IR bridge (3),
connections can be set to bridge mode by writing
.B bridge
to the
.B ctl
file.
.SH SOURCE
.B /sys/src/9/*/devether.c