Section "Device"
    Identifier "XSPICE"
    Driver "spiceqxl"

    # ---- Network and security options

    # Do not require a client password.
    # default: False
    #Option "SpiceDisableTicketing" "False"

    # Set the password required to connect to the Spice server.
    #Option "SpicePassword" ""

    # Enable usage of SASL supported by the spice-gtk client. Not required,
    # default: False
    #Option "SpiceSasl" "False"

    # Use Spice's regular unencrypted port. One of SpicePort or SpiceTlsPort
    # must be specified. SpicePort can also be set through the XSPICE_PORT
    # environment variable or the --port Xspice option.
    # Specify 0 to disable the use of the regular port
    # default: 5900
    #Option "SpicePort" "5900"

    # Use a TLS (encrypted) port. One of SpicePort or SpiceTlsPort must be
    # specified. SpiceTlsPort can also be set through the XSPICE_TLS_PORT
    # environment variable or the --tls-port Xspice option.
    #Option "SpiceTlsPort" "5900"

    # Set the directory where the CA certificate, server key and server
    # certificate are searched for TLS, using the same predefined names QEMU
    # uses:
    #   cacert.pem, server-key.pem, server-cert.pem
    #Option "SpiceX509Dir" ""

    # Set the CA certificate file location for TLS.
    #Option "SpiceCacertFile" ""

    # Set the server key file location for TLS.
    #Option "SpiceX509KeyFile" ""

    # Set the server key's password for TLS.
    #Option "SpiceX509KeyPassword" ""

    # Set the server certificate file location for TLS.
    #Option "SpiceX509CertFile" ""

    # Set the server DH file location for TLS.
    #Option "SpiceDhFile" ""

    # Set the TLS ciphers preference order.
    #Option "SpiceTlsCiphers" ""

    # Listen to a specific interface.
    # default: Listen to all (0.0.0.0).
    #Option "SpiceAddr" ""

    # Set to True to only listen on IPv4 interfaces.
    # default: False
    #Option "SpiceIPV4Only" "False"

    # Set to True to only listen on IPv6 interfaces.
    # default: False
    #Option "SpiceIPV6Only" "False"

    # If set, the Spice server will exit when the first client disconnects.
    # default: False
    #Option "SpiceExitOnDisconnect" "True"


    # ---- Monitor configuration options

    # The number of heads to allocate by default.
    # default: 4
    #Option "NumHeads" "4"


    # ---- Compression options

    # Set zlib glz wan compression. Options are auto, never, always.
    # default: auto
    #Option "SpiceZlibGlzWanCompression" ""

    # Set jpeg wan compression. Options are auto, never, always.
    # default: auto
    #Option "SpiceJpegWanCompression" ""

    # Set image compression. Options are off, auto_glz, auto_lz, quic, glz, lz.
    # default: auto_glz
    #Option "SpiceImageCompression" ""

    # If non zero, the driver will render all operations to the frame buffer,
    # and keep track of a changed rectangle list. The changed rectangles
    # will be transmitted at the rate requested (e.g. 10 frames per second).
    # This can dramatically reduce network bandwidth for some use cases.
    #Option "SpiceDeferredFPS" "10"

    # Set the streaming video method. Options are filter, off, all.
    # default: filter
    #Option "SpiceStreamingVideo" ""

    # Sets a semicolon-separated list of preferred video codecs.
    # Each takes the form encoder:codec, with spice:mjpeg being the default,
    # and other options being provided by gstreamer for the mjpeg, vp8 and h264
    # codecs.
    #Option "SpiceVideoCodecs" ""

    # Enable caching of images directly written with uxa->put_image.
    # default: True
    #Option "EnableImageCache" "True"

    # Enable caching of images created by uxa->prepare_access.
    # default: True
    #Option "EnableFallbackCache" "True"

    # Enable the use of off-screen surfaces.
    # default: True
    #Option "EnableSurfaces" "True"


    # ---- Xspice-specific buffer options

    # Buffer Size notes:
    #  The following buffer sizes are used for Xspice only.
    #  If you are using the DFPS mode, surface ram is not used,
    #  and you can set it to 1.
    #  Otherwise, the surface buffer should be at least as large
    #   as the frame buffer, and probably a multiple like 8.
    #  The command buffer ram should also be substantially larger
    #   than the frame buffer, and note that the frame buffer occupies
    #   the front of the command buffer.  Hence, our default size
    #   is a command buffer 7x the size of the frame buffer.
    #  If you see 'Out of memory' errors in your xorg.log, you probably need
    #   to increase the surface or command buffer sizes.

    # The amount of surface buffer ram, in megabytes, to allocate.
    # default: 128
    #Option "SurfaceBufferSize" "128"

    # The amount of command buffer ram, in megabytes, to allocate.
    # default: 128
    #Option "CommandBufferSize" "128"

    # The amount of frame buffer ram, in megabytes, to reserve
    #  This is reserved out of the CommandBuffer RAM
    #  This governs the maximum size the X screen can be;
    #   4 Heads at 1920x1080 require 32M of RAM
    # default: 16
    #Option "FrameBufferSize" "16"


    # ---- VDAgent options

    # Whether or not to accept Vdagent connections.
    # default: False
    #Option "SpiceVdagentEnabled" "False"

    # Default path to listen for agent virtual io connections.
    # default: /tmp/xspice-virtio"
    #Option "SpiceVdagentVirtioPath" "/tmp/xspice-virtio"

    # Default path to listen for agent uinput connections.
    # default: /tmp/xspice-uinput
    #Option "SpiceVdagentUinputPath" "/tmp/xspice-uinput"

    # Default user id to set for the Virtio and Uinput sockets.
    # Note: both uid and gid must be given for either to take effect.
    # default: 0, or none
    #Option "SpiceVdagentUid" "0"

    # Default group id to set for the Virtio and Uinput sockets.
    # Note: both uid and gid must be given for either to take effect.
    # default: 0, or none
    #Option "SpiceVdagentGid" "0"

    # Set Spice Agent Mouse - Use Agent mouse if an agent connects.
    # default: True
    #Option "SpiceAgentMouse" "True"

    # Set Spice Playback compression.
    # default: True
    #Option "SpicePlaybackCompression" "True"

    # Disable copy and paste.
    # default: False
    #Option "SpiceDisableCopyPaste" "False"

    # If a directory is given, any file in that directory will be read
    # for audio data to be sent to the client.
    # default: Not set.
    Option "SpicePlaybackFIFODir" "/tmp/audio_fifo/"

    # A unix domain name for a unix domain socket to communicate with
    # a spiceccid smartcard driver.
    # default: Not set.
    #Option "SpiceSmartCardFile" "/tmp/spice.pcsc.comm"
EndSection

Section "InputDevice"
    Identifier "XSPICE POINTER"
    Driver     "xspice pointer"
EndSection

Section "InputDevice"
    Identifier "XSPICE KEYBOARD"
    Driver     "xspice keyboard"
EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
EndSection

Section "Screen"
    Identifier     "XSPICE Screen"
    Monitor        "Configured Monitor"
    Device         "XSPICE"
    DefaultDepth   24
    SubSection "Display"
        Modes "1366x768"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier "XSPICE Example"
    Screen "XSPICE Screen"
    InputDevice "XSPICE KEYBOARD"
    InputDevice "XSPICE POINTER"
EndSection

# Prevent udev from loading vmmouse in a vm and crashing.
Section "ServerFlags"
    Option "AutoAddDevices" "False"
EndSection