solanum/tests/README
2017-07-29 22:46:05 +01:00

250 lines
11 KiB
Text

Writing TAP Tests
Introduction
This is a guide for users of the C TAP Harness package or similar
TAP-based test harnesses explaining how to write tests. If your
package uses C TAP Harness as the test suite driver, you may want to
copy this document to an appropriate file name in your test suite as
documentation for contributors.
About TAP
TAP is the Test Anything Protocol, a protocol for communication
between test cases and a test harness. This is the protocol used by
Perl for its internal test suite and for nearly all Perl modules,
since it's the format used by the build tools for Perl modules to run
tests and report their results.
A TAP-based test suite works with a somewhat different set of
assumptions than an xUnit test suite. In TAP, each test case is a
separate program. That program, when run, must produce output in the
following format:
1..4
ok 1 - the first test
ok 2
# a diagnostic, ignored by the harness
not ok 3 - a failing test
ok 4 # skip a skipped test
The output should all go to standard output. The first line specifies
the number of tests to be run, and then each test produces output that
looks like either "ok <n>" or "not ok <n>" depending on whether the
test succeeded or failed. Additional information about the test can
be provided after the "ok <n>" or "not ok <n>", but is optional.
Additional diagnostics and information can be provided in lines
beginning with a "#".
Processing directives are supported after the "ok <n>" or "not ok <n>"
and start with a "#". The main one of interest is "# skip" which says
that the test was skipped rather than successful and optionally gives
the reason. Also supported is "# todo", which normally annotates a
failing test and indicates that test is expected to fail, optionally
providing a reason for why.
There are three more special cases. First, the initial line stating
the number of tests to run, called the plan, may appear at the end of
the output instead of the beginning. This can be useful if the number
of tests to run is not known in advance. Second, a plan in the form:
1..0 # skip entire test case skipped
can be given instead, which indicates that this entire test case has
been skipped (generally because it depends on facilities or optional
configuration which is not present). Finally, if the test case
encounters a fatal error, it should print the text:
Bail out!
on standard output, optionally followed by an error message, and then
exit. This tells the harness that the test aborted unexpectedly.
The exit status of a successful test case should always be 0. The
harness will report the test as "dubious" if all the tests appeared to
succeed but it exited with a non-zero status.
Writing TAP Tests
Environment
One of the special features of C TAP Harness is the environment that
it sets up for your test cases. If your test program is called under
the runtests driver, the environment variables C_TAP_SOURCE and
C_TAP_BUILD will be set to the top of the test directory in the source
tree and the top of the build tree, respectively. You can use those
environment variables to locate additional test data, programs and
libraries built as part of your software build, and other supporting
information needed by tests.
The C and shell TAP libraries support a test_file_path() function,
which looks for a file under the build tree and then under the source
tree, using the C_TAP_BUILD and C_TAP_SOURCE environment variables,
and return the full path to the file. This can be used to locate
supporting data files. They also support a test_tmpdir() function
that returns a directory that can be used for temporary files during
tests.
Perl
Since TAP is the native test framework for Perl, writing TAP tests in
Perl is very easy and extremely well-supported. If you've never
written tests in Perl before, start by reading the documentation for
Test::Tutorial and Test::Simple, which walks you through the basics,
including the TAP output syntax. Then, the best Perl module to use
for serious testing is Test::More, which provides a lot of additional
functions over Test::Simple including support for skipping tests,
bailing out, and not planning tests in advance. See the documentation
of Test::More for all the details and lots of examples.
C TAP Harness can run Perl test scripts directly and interpret the
results correctly, and similarly the Perl Test::Harness module and
prove command can run TAP tests written in other languages using, for
example, the TAP library that comes with C TAP Harness. You can, if
you wish, use the library that comes with C TAP Harness but use prove
instead of runtests for running the test suite.
C
C TAP Harness provides a basic TAP library that takes away most of the
pain of writing TAP test cases in C. A C test case should start with
a call to plan(), passing in the number of tests to run. Then, each
test should use is_int(), is_string(), is_double(), or is_hex() as
appropriate to compare expected and seen values, or ok() to do a
simpler boolean test. The is_*() functions take expected and seen
values and then a printf-style format string explaining the test
(which may be NULL). ok() takes a boolean and then the printf-style
string.
Here's a complete example test program that uses the C TAP library:
#include <stddef.h>
#include <tap/basic.h>
int
main(void)
{
plan(4);
ok(1, "the first test");
is_int(42, 42, NULL);
diag("a diagnostic, ignored by the harness");
ok(0, "a failing test");
skip("a skipped test");
return 0;
}
This test program produces the output shown above in the section on
TAP and demonstrates most of the functions. The other functions of
interest are sysdiag() (like diag() but adds strerror() results),
bail() and sysbail() for fatal errors, skip_block() to skip a whole
block of tests, and skip_all() which is called instead of plan() to
skip an entire test case.
The C TAP library also provides plan_lazy(), which can be called
instead of plan(). If plan_lazy() is called, the library will keep
track of how many test results are reported and will print out the
plan at the end of execution of the program. This should normally be
avoided since the test may appear to be successful even if it exits
prematurely, but it can make writing tests easier in some
circumstances.
Complete API documentation for the basic C TAP library that comes with
C TAP Harness is available at:
<https://www.eyrie.org/~eagle/software/c-tap-harness/>
It's common to need additional test functions and utility functions
for your C tests, particularly if you have to set up and tear down a
test environment for your test programs, and it's useful to have them
all in the libtap library so that you only have to link your test
programs with one library. Rather than editing tap/basic.c and
tap/basic.h to add those additional functions, add additional *.c and
*.h files into the tap directory with the function implementations and
prototypes, and then add those additional objects to the library.
That way, you can update tap/basic.c and tap/basic.h from subsequent
releases of C TAP Harness without having to merge changes with your
own code.
Libraries of additional useful TAP test functions are available in
rra-c-util at:
<https://www.eyrie.org/~eagle/software/rra-c-util/>
Some of the code there is particularly useful when testing programs
that require Kerberos keys.
If you implement new test functions that compare an expected and seen
value, it's best to name them is_<something> and take the expected
value, the seen value, and then a printf-style format string and
possible arguments to match the calling convention of the functions
provided by C TAP Harness.
Shell
C TAP Harness provides a library of shell functions to make it easier
to write TAP tests in shell. That library includes much of the same
functionality as the C TAP library, but takes its parameters in a
somewhat different order to make better use of shell features.
The libtap.sh file should be installed in a directory named tap in
your test suite area. It can then be loaded by tests written in shell
using the environment set up by runtests with:
. "$C_TAP_SOURCE"/tap/libtap.sh
Here is a complete test case written in shell which produces the same
output as the TAP sample above:
#!/bin/sh
. "$C_TAP_SOURCE"/tap/libtap.sh
cd "$C_TAP_BUILD"
plan 4
ok 'the first test' true
ok '' [ 42 -eq 42 ]
diag a diagnostic, ignored by the harness
ok '' false
skip 'a skipped test'
The shell framework doesn't provide the is_* functions, so you'll use
the ok function more. It takes a string describing the text and then
treats all of its remaining arguments as a condition, evaluated the
same way as the arguments to the "if" statement. If that condition
evaluates to true, the test passes; otherwise, the test fails.
The plan, plan_lazy, diag, and bail functions work the same as with
the C library. skip takes a string and skips the next test with that
explanation. skip_block takes a count and a string and skips that
many tests with that explanation. skip_all takes an optional reason
and skips the entire test case.
Since it's common for shell programs to want to test the output of
commands, there's an additional function ok_program provided by the
shell test library. It takes the test description string, the
expected exit status, the expected program output, and then treats the
rest of its arguments as the program to run. That program is run with
standard error and standard output combined, and then its exit status
and output are tested against the provided values.
A utility function, strip_colon_error, is provided that runs the
command given as its arguments and strips text following a colon and a
space from the output (unless there is no whitespace on the line
before the colon and the space, normally indicating a prefix of the
program name). This function can be used to wrap commands that are
expected to fail with output that has a system- or locale-specific
error message appended, such as the output of strerror().
License
This file is part of the documentation of C TAP Harness, which can be
found at <https://www.eyrie.org/~eagle/software/c-tap-harness/>.
Copyright 2010, 2016 Russ Allbery <eagle@eyrie.org>
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without any warranty.