vulpineawoo/solanum
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
2226 commits 2 branches 0 tags 40 MiB
Commit graph

223 commits

Author SHA1 Message Date
Keith Buck 330692a1f2 Add option to immediately apply nick RESVs by FNC'ing. 2012-03-25 01:34:45 +00:00
William Pitcock 02270e9602 Add listen::defer_accept option for controlling usage of TCP_DEFER_ACCEPT option. 2012-03-17 10:00:39 -05:00
Jilles Tjoelker 755c144eb6 Specify more about IP addresses in TS6 protocol document. 2012-03-13 22:41:39 +01:00
Jilles Tjoelker eda3590ea0 Fix RSFNC parameter order in TS6 protocol document. 2012-03-07 00:39:03 +01:00
Nathan Phillip Brink 634d4aad72 Fix inconsistency between --sysconfdir and --with-confdir, deprecate --with-confdir. 
The inconsistency was created in
c74836dc4a where genssl.sh.in was made
to use sysconfdir while the IRCd and buildsystem still used confdir.
 2012-03-02 01:11:42 +00:00
Nathan Phillip Brink c74836dc4a Add explicit support for being installed into a system triggered with --enable-fhs-paths. 
Add two mechanism for avoiding name-collisions in a system-wide
installation of charybdis. The ssld and bandb daemons, intended to be
directly used by ircd and not the user, install into libexec when
--enable-fhs-paths is set. For binaries which are meant to be in PATH
(bindir), such as ircd and viconf, there is now an option
--with-program-prefix=progprefix inspired by automake. If the user
specifies --with-program-prefix=charybdis, the ircd binary is named
charybdisircd when installed.

Add support for saving the pidfile to a rundir and storing the ban
database in localstatedir instead of in sysconfdir. This is, again,
conditional on --enable-fhs-paths.

Fix(?) genssl.sh to always write created SSL key/certificate/dh
parameters to the sysconfdir specified during ./configure. The
previous behavior was to assume that the user ran genssl.sh after
ensuring that his current working directory was either sysconfdir or a
sibling directory of sysconfdir.
 2012-03-01 02:41:09 +00:00
Jilles Tjoelker d42e6915cf Pace aways. 
This becomes important because of away-notify sending aways to common
channels much like nick changes (which are also paced).

Marking as unaway is not limited (but obviously only does something if the
user was away before). To allow users to fix typos in away messages, two
aways are allowed in sequence if away has not been used recently.
 2012-02-18 16:32:57 +01:00
Keith Buck e88a1f1b15 Add ratelimit for high-bandwidth commands. 2012-02-18 03:54:44 +00:00
Keith Buck c5bbc60375 Add away-notify client capability. 2012-02-14 14:15:44 +00:00
Jilles Tjoelker adcec062ce 'monitor s' output does not end with RPL_ENDOFMONLIST. 2011-12-21 21:29:46 +01:00
Jilles Tjoelker b225bf93b7 Change default --with-nicklen to 31, like atheme-services. 2011-11-29 23:32:10 +01:00
William Pitcock b583faf970 Add support for customizing the usable nick length. 
This adds a new ISUPPORT token, NICKLEN_USABLE which is strictly an informative value.
NICKLEN is always the maximum runtime NICKLEN supported by the IRCd, as other servers may
have their own usable NICKLEN settings.  As NICKLEN_USABLE is strictly informative, and
NICKLEN is always the maximum possible NICKLEN, any clients which depend on NICKLEN for
memory preallocation will be unaffected by runtime changes to NICKLEN_USABLE.

The default NICKLEN is 50; the default serverinfo::nicklen in the config file is set to
30, which is the NICKLEN presently used on StaticBox.
 2011-11-29 16:10:21 -06:00
Jilles Tjoelker 92236e376a Remove an obsolete TS5 reference. 2011-11-01 22:07:32 +01:00
Jilles Tjoelker 2da6f6ebd7 Put back use_forward. 2011-09-25 16:22:29 +02:00
Elizabeth Jennifer Myers 765d839d3c Port ircd-seven banfowards to charybdis. 
nenolod gave the thumbs-up to port ircd-seven banfowards to charybdis to spb
for a while, and people have asked about it. Might as well do it since it's a
slow weekend.

Note that as a side effect use_forward is removed from the config and
unconditionally enabled!
 2011-08-12 20:33:10 -04:00
Keith Buck da1b891f9f Pedantry: Make indentation consistent in example and reference confs. 2011-05-13 23:42:27 -07:00
Kiyoshi Aman f8c9d8d9be doc/extended-join.txt: Document CAP extended-join. 2011-04-19 04:52:56 -04:00
Stephen Bennett e6e54763d9 Make flood control settings configurable by those who know exactly what they're doing. 
From ircd-seven git changeset 29aa4203150337925a4f5c6e7da47be5394c2125 .
 2011-03-27 16:35:26 -04:00
Elizabeth Jennifer Myers 0a1e77c27c Support IPv6 blacklists. Also add a conf file option allowing the use of IPv4, IPv6, or both for a blacklist. 
Although few blacklists currently support IPv6 lookups, they will likely begin to do so in the near future as more net trash begins using IPv6.
 2011-02-27 16:38:05 -05:00
Stephen Bennett 341f971efa Bring across disable_local_channels config option from ircd-seven 2010-12-21 20:38:04 +00:00
William Pitcock f56b4e3c07 account-notify spec: with the extended-join capability, doing a WHO on new users is not necessary. 2010-12-16 00:35:12 -06:00
William Pitcock a8df2896bb Update specification. 2010-12-15 23:59:47 -06:00
William Pitcock 4f943f99e6 Add specification for the account-notify protocol extension. 2010-12-15 23:38:35 -06:00
William Pitcock ff0cc1e616 Add support for linking using SSL certificate fingerprints as the link credential rather than the traditional server-password pair. 2010-12-13 23:14:00 -06:00
William Pitcock 429cf1b74f Add oper-override (modehacking only) as a module. 
I think if you are going to kick someone from a channel.
 2010-12-06 23:44:55 -06:00
Jilles Tjoelker 45a27bf8b9 Change max_bans in reference.conf from 25 to 100, like example.conf. 2010-12-05 16:51:48 +01:00
JD Horelick 486436a299 Do not install ban .conf files (like kline.conf, rsv.conf, etc) as they aren't used anymore. 2010-12-04 17:29:01 -05:00
JD Horelick f1e5a31775 Change the filenames of the generated SSL key/cert to ssl.* instead of test.* so that they're a bit more descriptive. 2010-11-13 16:07:54 -05:00
William Pitcock 22ab2e2544 Add documentation for proposed JUPE TS6 command. 2010-10-28 13:24:22 -05:00
William Pitcock f42c7be6a5 Example configuration: Set the default TLS port to 6697. 2010-09-17 10:48:56 -05:00
Jilles Tjoelker 717238d2a2 Add target change for channels. 
This has a separate enabling option channel::channel_target_change.

It applies to PRIVMSG, NOTICE and TOPIC by unvoiced unopped non-opers.

The same slots are used for channels and users.
 2010-08-29 01:26:00 +02:00
William Pitcock 3c30c7a2de Automated merge with ssh://hg.atheme.org//hg/charybdis 2010-05-14 08:49:31 -05:00
William Pitcock 40e92fca0e Recommend EFNet's RBL instead of DroneBL due to trustworthiness issues. 
(StaticBox policy change as of May 14, 2010.)
 2010-05-14 08:49:26 -05:00
Stephen Bennett 73d83e6db0 Update MLOCK protocol documentation to match changes in code 2010-05-02 22:18:13 +01:00
Jilles Tjoelker a0ce140ed6 Improve technical documentation of BAN protocol. 2010-04-29 00:26:49 +02:00
JD Horelick 944b0584ea Change config option for ident_timeout to default_ident_timeout as jilles 
recommended.
 2010-04-05 16:29:11 -04:00
JD Horelick 0ffb810660 Add a configuration option for ident_timeout. 2010-04-05 15:28:44 -04:00
Jilles Tjoelker dca9e55257 Add propagated resvs, like klines and xlines. 2010-03-27 16:13:57 +01:00
Jilles Tjoelker 3cbbfb2556 Add propagated xlines, like klines. 2010-03-16 23:05:50 +01:00
Jilles Tjoelker 1702b69419 Add option general::use_propagated_bans to allow disabling new KLINE. 
If this option is yes (default), KLINE by itself sets global (propagated) bans.
If this option is no, KLINE by itself sets a local kline following cluster{},
compatible with 3.2 and older versions.
 2010-03-14 17:21:20 +01:00
William Pitcock d09bb8aeb0 Add syntax description of MLOCK message to ts6-protocol.txt. 2010-03-07 21:51:41 -06:00
Jilles Tjoelker 13d4255541 Document BAN message. 2010-03-07 14:06:28 +01:00
William Pitcock a8560affce Documentation updates for the ip_cloaking_4.0 transition. 2010-02-18 07:34:40 -06:00
William Pitcock ff31db8473 Add support for client certificate fingerprints in o:lines. 2010-02-17 06:41:41 -06:00
Jilles Tjoelker 5155c03c96 Update target change documentation. 2010-02-17 00:38:08 +01:00
Jilles Tjoelker 4b58bbb2da ts6-protocol.txt: mention meaning of capabs EX, IE, SERVICES, KNOCK. 2009-12-26 00:25:52 +01:00
Jilles Tjoelker fa1a7bef02 Add two more reasons why ssld_count>1 can be useful: bugs and fd limits. 2009-11-18 00:00:07 +01:00
Jilles Tjoelker b23244702a Note that blacklist{} only accepts host/reason pairs, no host+host+reason. 2009-10-18 21:08:37 +02:00
Jilles Tjoelker c2c25552ca Force part local users (not resv_exempt) on channel resv. 
A notice will be sent to any force parted users that the channel
is temporarily/permanently unavailable on the server.
A new config option channel::resv_forcepart can be used to disable this.

from ircd-ratbox (dubkat)
 2009-09-19 21:24:35 +02:00
Jilles Tjoelker cef0fc6693 Update copyright years in sgml docs. 2009-05-08 22:40:18 +02:00
Jilles Tjoelker 6c43f550b2 Remove notes about now fixed xline \s bugs from sgml docs. 2009-05-08 22:37:20 +02:00
Jilles Tjoelker 3e0bb80ad1 Add description for TB and TOPIC messages. 2009-03-29 22:05:59 +02:00
Jilles Tjoelker 623322e8d9 Update sgml documentation for +z enhancement. 2009-03-29 18:55:23 +02:00
Jilles Tjoelker c4d2d01419 Apply +z to messages blocked by +b and +q as well. 
This adds a new server capab EOPMOD which will be used
for an extended topic command also.
 2009-03-29 15:48:07 +02:00
Jilles Tjoelker 1ba5ea0f06 Mention that @#chan/+#chan requires CHW capab. 2009-03-29 15:04:17 +02:00
Jilles Tjoelker 7e7004c4d7 Add GUNGLINE to protocol documentation (efnet only, not in charybdis). 2009-03-25 00:34:12 +01:00
Jilles Tjoelker 86aba27c2d Document efnet-style GLINE protocol. 2009-03-01 01:03:58 +01:00
Jilles Tjoelker 6865c0b099 Add channel::only_ascii_channels config option 
to restrict channel names to printable ascii only.
Like disable_fake_channels this only applies to joins
by local users; unlike disable_fake_channels it applies
to opers as well.
 2009-02-22 00:12:21 +01:00
Jilles Tjoelker e9f64b98ac Do not create directories under PREFIX while building. 2009-02-08 21:18:26 +01:00
Jilles Tjoelker 0749b751fa Clarify some PRIVMSG/NOTICE restrictions. 2009-02-08 15:48:04 +01:00
Jilles Tjoelker f8933d67e3 Numerics are also server-server messages. 2009-02-08 15:39:12 +01:00
Jilles Tjoelker 2d042188c7 Clarify propagation of JOIN and SJOIN. 2009-02-06 15:58:02 +01:00
Jilles Tjoelker 03204327ec Add more information about propagation. 2009-02-05 20:10:34 +01:00
Jilles Tjoelker 3cadd0c433 Add description for LOCOPS message. 2009-02-05 19:57:51 +01:00
Jilles Tjoelker aa12f64bd6 Clarify connection setup. 2009-01-30 17:08:59 +01:00
Jilles Tjoelker cdff8b707a First draft of a more complete TS6 server protocol description. 2009-01-25 21:11:28 +01:00
Jilles Tjoelker 235fd1cecf WHOIS 330 (services login name) does not need a remote whois. 2009-01-25 17:36:19 +01:00
Jilles Tjoelker 940c734752 Add umode +R to doc/services.txt. 2009-01-25 17:35:57 +01:00
Jilles Tjoelker 3a17735469 Change /stats O to show privset blocks (oper only). 
To show operator blocks, only /stats o (lowercase) now works.
 2009-01-18 01:35:24 +01:00
Jilles Tjoelker 5f29102170 Make SCAN UMODES GLOBAL NO-LIST MASK <mask> no longer an operspy command. 
This agrees with allowing MODE <nick> as non-operspy.
 2009-01-01 20:32:30 +01:00
Jilles Tjoelker d9e7ca4960 BOPM/TCM do not need the ability to global kill, so remove it from server_bot 
privset.
 2008-12-28 23:24:43 +01:00
Jilles Tjoelker 7a618bd339 Update sgml docs for cidr_ipv4_bitlen/cidr_ipv6_bitlen split. 2008-12-11 21:53:36 +01:00
Jilles Tjoelker c6c70358b3 Mention auto CPRIVMSG/CNOTICE in sgml docs. 2008-12-05 15:33:38 +01:00
Jilles Tjoelker 26348c8f9e Add /topic !#channel operspy to sgml docs. 2008-12-04 01:40:57 +01:00
Jilles Tjoelker dffb83aa69 Put back example.conf limits to their old values, 
increasing cidr limit somewhat more.
 2008-11-30 13:35:01 +01:00
Jilles Tjoelker bc7c44dc48 Update reference.conf for cidr change as well. 2008-11-30 13:33:43 +01:00
Jilles Tjoelker e33e589cbf Split cidr_bitlen into cidr_ipv4_bitlen and cidr_ipv6_bitlen. 
Taken from ircd-ratbox 3 via shadowircd.
 2008-11-30 13:31:59 +01:00
Jilles Tjoelker 7e920161c8 Add sgml documentation for /quote set. 2008-11-28 15:48:41 +01:00
Jilles Tjoelker 7d14177747 Improve note about case sensitivity. 2008-11-26 00:07:12 +01:00
Jilles Tjoelker db67ca336c Mention how to specify the default port in a remote connect. 2008-11-25 23:58:24 +01:00
Jilles Tjoelker 65662fdff8 Enhance description of umode +S. 2008-09-13 19:10:57 +02:00
Jilles Tjoelker 842fdfb1c3 Note extra server wallops in recent versions. 2008-09-13 18:46:03 +02:00
Jilles Tjoelker 17f9c74a0a Put oper privileges in alphabetical order in the sgml docs. 2008-09-13 00:46:20 +02:00
Jilles Tjoelker 3eae266ca3 Fix oper:remote in reference.conf. 2008-09-13 00:34:52 +02:00
Jilles Tjoelker da77b103ef Document privsets in the example confs. 2008-09-13 00:32:22 +02:00
Jilles Tjoelker d7703c583e Pick up remote to oper:routing change. 2008-09-13 00:29:15 +02:00
Jilles Tjoelker 5b5e9c89ea Update SGML docs for need_ssl and new oper priv system. 2008-09-09 23:32:19 +02:00
Jilles Tjoelker 10847f65d3 Remove old oper privilege flags. 2008-09-09 21:51:26 +02:00
Jilles Tjoelker 3e664be375 Document need_ssl flags in example.conf. 2008-09-09 21:46:12 +02:00
Jilles Tjoelker b159441429 Add need_ssl to auth{} and operator{}. 
Specifying need_ssl on auth{} denies the connection if
it is not SSL/TLS, much like need_ident or need_sasl.
Specifying need_ssl on operator{} refuses opering with
ERR_NOOPERHOST if the connection is not SSL/TLS.
from ircd-ratbox
 2008-09-07 01:18:58 +02:00
Jilles Tjoelker 477dc2e926 Correct spelling of oper:remoteban in example.conf. 2008-09-02 23:42:51 +02:00
Jilles Tjoelker 3fe1c72819 oper:adminwall priv seems meaningless, remove it. 2008-09-02 23:40:22 +02:00
William Pitcock 917e9b1ab4 Backed out changeset 7f24e5f3fb86 2008-08-29 14:46:19 -05:00
Stephen Bennett 81c7f48295 If auth_user and server password were given and not used, use auth_user as an account name in the nickserv identify command 2008-08-29 14:45:22 -05:00
William Pitcock b501097030 privset example: Add a privset for local bots like BOPM and TCMs. 2008-08-17 08:58:34 -05:00
William Pitcock be52582805 Add some privsets for opers here. 2008-08-17 07:17:25 -05:00
Valery V Yatsko 33e65f0004 no more servlink - removed 'servlink_path' from reference.conf and source files 2008-08-16 22:23:56 +04:00
Valery V Yatsko 67e6f4df3b Updated reference.conf 2008-08-13 23:17:43 +04:00
Jilles Tjoelker cc49daee1a Update example.conf for max_unknown_ip->throttle. 2008-08-01 02:54:36 +02:00
Jilles Tjoelker 43946961df Move to ratbox3 reject and throttle code. 
Throttle replaces max_unknown_ip, reject is like before
(including the charybdis-specific unkline handling).
Both of these now apply before SSL negotiation.

This commit does not include the global_cidr and new dline code.

m_webirc is a bit nasty with throttling (unlike before
with max_unknown_ip), this may be fixed later (or
the webirc IP needs to be exempt{}ed).
 2008-08-01 01:59:08 +02:00