vulpineawoo/solanum
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

doc: Cleanup trailing whitespace

Browse source
This commit is contained in:
Matt Ullman 2016-03-29 10:09:52 -04:00
parent 2b535500f9
commit 5c0df0e743
4 changed files with 41 additions and 41 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
doc/ircd.conf.example
View file

@ -59,7 +59,7 @@ serverinfo {
#vhost = "192.0.2.6";
/* for IPv6 */
#vhost6 = "2001:db8:2::6";
/* ssl_private_key: our ssl private key */
ssl_private_key = "etc/ssl.key";
@ -183,7 +183,7 @@ auth {
* flags = ...; below if it is.
*/
password = "letmein";
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
@ -191,7 +191,7 @@ auth {
spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
*
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
@ -210,7 +210,7 @@ auth {
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */
class = "opers";
};
@ -253,13 +253,13 @@ operator "god" {
user = "*god@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
* contained in flags = ...; this will need to be encrypted using
* contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
* A password should not be defined when this is used, see
* A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
@ -400,10 +400,10 @@ serverhide {
* as of this writing.
*
* As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
* is considered a match. If included, a comma-separated list of *quoted*
* is considered a match. If included, a comma-separated list of *quoted*
* strings is allowed to match queries. They may be of the format "0" to "255"
* to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
* an A record. The blacklist is only applied if it matches anything in the
* an A record. The blacklist is only applied if it matches anything in the
* list. You may freely mix full IP's and final octets.
*
* Consult your blacklist provider for the meaning of these parameters; they

60
doc/reference.conf
View file

@ -28,15 +28,15 @@
*
* Times/durations are written as:
* 12 hours 30 minutes 1 second
*
*
* Valid units of time:
* month, week, day, hour, minute, second
*
* Valid units of size:
* megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
*
* Sizes and times may be singular or plural.
*/
* Sizes and times may be singular or plural.
*/
/* Extensions:
*
@ -145,7 +145,7 @@ serverinfo {
* This should be an ipv6 IP only.
*/
#vhost6 = "2001:db7:2::6";
/* ssl_private_key: our ssl private key */
ssl_private_key = "etc/ssl.key";
@ -247,7 +247,7 @@ class "users" {
*/
cidr_ipv6_bitlen = 64;
/* number_per_cidr: Number of connections to allow from a subnet of the
/* number_per_cidr: Number of connections to allow from a subnet of the
* size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen.
* 4 seems to be a good default to me.
*/
@ -309,19 +309,19 @@ listen {
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
* sslport: the specific port to listen ssl connections on. if no
* sslport: the specific port to listen ssl connections on. if no
* host is specified before, it will listen on all available IPs.
*
* ports are seperated via a comma, a range may be specified using ".."
*/
/* port: listen on all available IPs, ports 5000 and 6665 to 6669 */
port = 5000, 6665 .. 6669;
/* sslport: listen for ssl connections on all available IPs, port 9999 */
sslport = 9999;
/* host: set a specific IP/host the ports after the line will listen
/* host: set a specific IP/host the ports after the line will listen
* on. This may be ipv4 or ipv6.
*/
host = "192.0.2.6";
@ -355,7 +355,7 @@ auth {
* flags = ...; below if it is.
*/
password = "letmein";
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
@ -363,7 +363,7 @@ auth {
spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
*
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
@ -383,7 +383,7 @@ auth {
* extend_chans | allow this user to join more channels than normal
*/
flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */
class = "opers";
};
@ -395,7 +395,7 @@ auth {
*/
redirserv = "irc.example.net";
redirport = 6667;
user = "*.example.com";
/* class: a class is required even though it is not used */
@ -470,13 +470,13 @@ operator "god" {
user = "*@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
* contained in flags = ...; this will need to be encrypted using
* contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
* A password should not be defined when this is used, see
* A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
@ -765,7 +765,7 @@ channel {
default_split_user_count = 0;
/* split servers: when the amount of servers that have acknowledged
* theyve finished bursting is lower than this, consider ourselves
* theyve finished bursting is lower than this, consider ourselves
* split. this must be set for automatic splitmode
*/
default_split_server_count = 0;
@ -880,7 +880,7 @@ serverhide {
* to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
* an A record. The blacklist is only applied if it matches anything in the
* list. You may freely mix full IP's and final octets.
*
*
* Consult your blacklist provider for the meaning of these parameters; they
* are usually used to denote different ban types.
*/
@ -1012,7 +1012,7 @@ general {
*/
default_floodcount = 10;
/* failed oper notice: send a notice to all opers on the server when
/* failed oper notice: send a notice to all opers on the server when
* someone tries to OPER and uses the wrong password, host or ident.
*/
failed_oper_notice = yes;
@ -1084,19 +1084,19 @@ general {
* displayed unconditionally.
*/
global_snotices = yes;
/* dline reason: show the user the dline reason when they connect
/* dline reason: show the user the dline reason when they connect
* and are dlined.
*/
dline_with_reason = yes;
/* kline delay: delay the checking of klines until a specified time.
* Useful if large kline lists are applied often to prevent the
* server eating CPU.
*/
kline_delay = 0 seconds;
/* kline reason: show the user the reason why they are k/dlined
/* kline reason: show the user the reason why they are k/dlined
* on exit. may give away who set k/dline when set via tcm.
*/
kline_with_reason = yes;
@ -1118,7 +1118,7 @@ general {
non_redundant_klines = yes;
/* warn no nline: warn opers about servers that try to connect but
* we dont have a connect {} block for. Twits with misconfigured
* we dont have a connect {} block for. Twits with misconfigured
* servers can get really annoying with this enabled.
*/
warn_no_nline = yes;
@ -1148,7 +1148,7 @@ general {
stats_o_oper_only=yes;
/* stats P oper only: make stats P (ports) oper only
* NOTE: users doing stats P will never be given the ips that the
* NOTE: users doing stats P will never be given the ips that the
* server listens on, simply the ports.
*/
stats_P_oper_only=no;
@ -1222,8 +1222,8 @@ general {
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
/* max targets: the maximum amount of targets in a single
/* max targets: the maximum amount of targets in a single
* PRIVMSG/NOTICE. set to 999 NOT 0 for unlimited.
*/
max_targets = 4;
@ -1237,7 +1237,7 @@ general {
*
* +g - callerid - Server Side Ignore
* +D - deaf - Don't see channel messages
* +i - invisible - Not shown in NAMES or WHO unless you share a
* +i - invisible - Not shown in NAMES or WHO unless you share a
* a channel
* +l - locops - See LOCOPS messages
* +Q - noforward - Unaffected by channel forwarding
@ -1246,7 +1246,7 @@ general {
* +w - wallop - See oper and server generated WALLOPS
* +z - operwall - See operwalls
*/
/* oper only umodes: usermodes only opers may set */
oper_only_umodes = operwall, locops, servnotice;
@ -1258,7 +1258,7 @@ general {
oper_snomask = "+s";
/* compression level: level of compression for compressed links between
* servers.
* servers.
*
* values are between: 1 (least compression, fastest)
* and: 9 (most compression, slowest).
@ -1339,7 +1339,7 @@ general {
};
modules {
/* module path: paths to search for modules specified below and
/* module path: paths to search for modules specified below and
* in /modload.
*/
path = "/usr/local/ircd/modules";

4
doc/technical/hooks.txt
View file

@ -6,7 +6,7 @@ contrib/example_module.c, this document simply describes which hooks are
available.
There are various hook structures available that may be passed to hooks:
hook_data - struct Client *client; const void *arg1;
hook_data - struct Client *client; const void *arg1;
const void *arg2;
hook_data_int - struct Client *client; const void *arg1; int arg2;
hook_data_client - struct Client *client; struct Client *target;
@ -114,7 +114,7 @@ The following hooks are called during various events related to clients.
oldsnomask = new snomask field
The following are for debugging and take struct hook_io_data for arguments.
The following are for debugging and take struct hook_io_data for arguments.
These can be used for a variety of purposes, but are aimed at the developer
community.
"iosend"

2
doc/technical/hostmask.txt
View file

@ -94,7 +94,7 @@ Section 3.3: Initialising and rehashing
To initialise, call init_host_hash(). This only needs to be done once on
startup.
On rehash, to wipe out the old unwanted conf, and free them if there are
no references to them, call clear_out_address_conf().
no references to them, call clear_out_address_conf().
Section 3.4: Finding IP/host confs
----------------------------------