reactos/drivers/usb/usbstor/usbstor.h
Victor Perevertkin 94e61c3080
[USBSTOR] Move PDO's Inquiry data and FDO's SCSI context
to their Device Extensions.
This way the driver can better handle low memory situations
2020-06-12 16:55:27 +03:00

363 lines
11 KiB
C

#ifndef _USBSTOR_H_
#define _USBSTOR_H_
#include <wdm.h>
#include <usbdi.h>
#include <usbbusif.h>
#include <usbdlib.h>
#include <classpnp.h>
#define USB_STOR_TAG 'sbsu'
#ifndef BooleanFlagOn
#define BooleanFlagOn(Flags, SingleFlag) ((BOOLEAN)((((Flags) & (SingleFlag)) != 0)))
#endif
#ifndef SrbGetCdb
#define SrbGetCdb(srb) ((PCDB)(srb->Cdb))
#endif
// Storage subclass codes
#define USB_SUBCLASS_RBC 0x01 // Typically, flash devices
#define USB_SUBCLASS_8020 0x02 // CD-ROM
#define USB_SUBCLASS_QIC 0x03 // QIC-157 Tapes
#define USB_SUBCLASS_UFI 0x04 // Floppy
#define USB_SUBCLASS_8070 0x05 // Removable media
#define USB_SUBCLASS_SCSI 0x06 // Transparent
#define USB_SUBCLASS_LOCKABLE 0x07 // Password-protected
#define USB_SUBCLASS_ISD200 0xF0 // ISD200 ATA
#define USB_SUBCLASS_CYP_ATACB 0xF1 // Cypress ATACB
#define USB_SUBCLASS_VENDOR 0xFF // Use vendor specific
// Storage protocol codes
#define USB_PROTOCOL_CBI 0x00 // Control/Bulk/Interrupt
#define USB_PROTOCOL_CB 0x01 // Control/Bulk w/o interrupt
#define USB_PROTOCOL_BULK 0x50 // bulk only
#define USB_PROTOCOL_UAS 0x62 // USB Attached SCSI
#define USB_PROTOCOL_USBAT 0x80 // SCM-ATAPI bridge
#define USB_PROTOCOL_EUSB_SDDR09 0x81 // SCM-SCSI bridge for SDDR-09
#define USB_PROTOCOL_SDDR55 0x82 // SDDR-55 (made up)
#define USB_PROTOCOL_DPCM_USB 0xF0 // Combination CB/SDDR09
#define USB_PROTOCOL_FREECOM 0xF1 // Freecom
#define USB_PROTOCOL_DATAFAB 0xF2 // Datafab chipsets
#define USB_PROTOCOL_JUMPSHOT 0xF3 // Lexar Jumpshot
#define USB_PROTOCOL_ALAUDA 0xF4 // Alauda chipsets
#define USB_PROTOCOL_KARMA 0xF5 // Rio Karma
#define USB_PROTOCOL_VENDOR 0xFF // Use vendor specific
// Mass storage class-specific commands
#define USB_BULK_GET_MAX_LUN 0xFE
#define USB_BULK_RESET_DEVICE 0xFF
#define USB_RECOVERABLE_ERRORS (USBD_STATUS_STALL_PID | USBD_STATUS_DEV_NOT_RESPONDING \
| USBD_STATUS_ENDPOINT_HALTED | USBD_STATUS_NO_BANDWIDTH)
#define USB_MAXCHILDREN 16
#define MAX_LUN 0xF
#define USBSTOR_DEFAULT_MAX_TRANSFER_LENGTH 0x10000
#define CBW_SIGNATURE 0x43425355
#define CSW_SIGNATURE 0x53425355
#include <pshpack1.h>
typedef struct
{
ULONG Signature; // CBW signature
ULONG Tag; // CBW Tag of operation
ULONG DataTransferLength; // data transfer length
UCHAR Flags; // CBW Flags endpoint direction
UCHAR LUN; // lun unit
UCHAR CommandBlockLength; // Command block length
UCHAR CommandBlock[16];
} CBW, *PCBW;
C_ASSERT(sizeof(CBW) == 31);
#define CSW_STATUS_COMMAND_PASSED 0x00
#define CSW_STATUS_COMMAND_FAILED 0x01
#define CSW_STATUS_PHASE_ERROR 0x02
typedef struct
{
ULONG Signature; // CSW signature
ULONG Tag; // CSW tag
ULONG DataResidue; // CSW data transfer diff
UCHAR Status; // CSW status
} CSW, *PCSW;
#include <poppack.h>
typedef struct
{
PIRP Irp;
ULONG ErrorIndex;
ULONG StallRetryCount; // the number of retries after receiving USBD_STATUS_STALL_PID status
union
{
CBW cbw;
CSW csw;
};
URB Urb;
SCSI_REQUEST_BLOCK SenseSrb;
} IRP_CONTEXT, *PIRP_CONTEXT;
typedef struct __COMMON_DEVICE_EXTENSION__
{
BOOLEAN IsFDO;
}USBSTOR_COMMON_DEVICE_EXTENSION, *PUSBSTOR_COMMON_DEVICE_EXTENSION;
#define USBSTOR_FDO_FLAGS_DEVICE_RESETTING 0x00000001 // hard reset is in progress
#define USBSTOR_FDO_FLAGS_IRP_LIST_FREEZE 0x00000002 // the irp list is freezed
typedef struct
{
USBSTOR_COMMON_DEVICE_EXTENSION Common; // common device extension
PDEVICE_OBJECT FunctionalDeviceObject; // functional device object
PDEVICE_OBJECT PhysicalDeviceObject; // physical device object
PDEVICE_OBJECT LowerDeviceObject; // lower device object
USB_BUS_INTERFACE_USBDI_V2 BusInterface; // bus interface of device
PUSB_DEVICE_DESCRIPTOR DeviceDescriptor; // usb device descriptor
PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor; // usb configuration descriptor
PUSB_STRING_DESCRIPTOR SerialNumber; // usb serial number
PUSBD_INTERFACE_INFORMATION InterfaceInformation; // usb interface information
USBD_CONFIGURATION_HANDLE ConfigurationHandle; // usb configuration handle
UCHAR BulkInPipeIndex; // bulk in pipe index
UCHAR BulkOutPipeIndex; // bulk out pipe index
UCHAR MaxLUN; // max lun for device
PDEVICE_OBJECT ChildPDO[USB_MAXCHILDREN]; // max 16 child pdo devices
KSPIN_LOCK IrpListLock; // irp list lock
LIST_ENTRY IrpListHead; // irp list head
ULONG IrpPendingCount; // count of irp pending
PSCSI_REQUEST_BLOCK ActiveSrb; // stores the current active SRB
KEVENT NoPendingRequests; // set if no pending or in progress requests
PSCSI_REQUEST_BLOCK LastTimerActiveSrb; // last timer tick active srb
ULONG SrbErrorHandlingActive; // error handling of srb is activated
ULONG TimerWorkQueueEnabled; // timer work queue enabled
ULONG InstanceCount; // pdo instance count
KSPIN_LOCK CommonLock;
PIO_WORKITEM ResetDeviceWorkItem;
ULONG Flags;
IRP_CONTEXT CurrentIrpContext;
}FDO_DEVICE_EXTENSION, *PFDO_DEVICE_EXTENSION;
typedef struct
{
USBSTOR_COMMON_DEVICE_EXTENSION Common;
UCHAR LUN; // lun id
BOOLEAN Claimed; // indicating if it has been claimed by upper driver
PDEVICE_OBJECT LowerDeviceObject; // points to FDO
PDEVICE_OBJECT *PDODeviceObject; // entry in pdo list
PDEVICE_OBJECT Self; // self
// the whole structure is not stored
UCHAR InquiryData[INQUIRYDATABUFFERSIZE]; // USB SCSI inquiry data
}PDO_DEVICE_EXTENSION, *PPDO_DEVICE_EXTENSION;
typedef struct _ERRORHANDLER_WORKITEM_DATA
{
PDEVICE_OBJECT DeviceObject;
PIRP_CONTEXT Context;
WORK_QUEUE_ITEM WorkQueueItem;
PIRP Irp;
} ERRORHANDLER_WORKITEM_DATA, *PERRORHANDLER_WORKITEM_DATA;
//---------------------------------------------------------------------
//
// fdo.c routines
//
NTSTATUS
USBSTOR_FdoHandlePnp(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PIRP Irp);
//---------------------------------------------------------------------
//
// pdo.c routines
//
NTSTATUS
USBSTOR_PdoHandlePnp(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PIRP Irp);
NTSTATUS
USBSTOR_CreatePDO(
IN PDEVICE_OBJECT DeviceObject,
IN UCHAR LUN);
//---------------------------------------------------------------------
//
// misc.c routines
//
NTSTATUS
NTAPI
USBSTOR_SyncForwardIrp(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PIRP Irp);
NTSTATUS
NTAPI
USBSTOR_GetBusInterface(
IN PDEVICE_OBJECT DeviceObject,
OUT PUSB_BUS_INTERFACE_USBDI_V2 BusInterface);
PVOID
AllocateItem(
IN POOL_TYPE PoolType,
IN ULONG ItemSize);
VOID
FreeItem(
IN PVOID Item);
NTSTATUS
USBSTOR_SyncUrbRequest(
IN PDEVICE_OBJECT DeviceObject,
OUT PURB UrbRequest);
NTSTATUS
USBSTOR_GetMaxLUN(
IN PDEVICE_OBJECT DeviceObject,
IN PFDO_DEVICE_EXTENSION DeviceExtension);
NTSTATUS
NTAPI
USBSTOR_SyncForwardIrpCompletionRoutine(
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PVOID Context);
NTSTATUS
USBSTOR_ResetDevice(
IN PDEVICE_OBJECT DeviceObject,
IN PFDO_DEVICE_EXTENSION DeviceExtension);
//---------------------------------------------------------------------
//
// descriptor.c routines
//
NTSTATUS
USBSTOR_GetDescriptors(
IN PDEVICE_OBJECT DeviceObject);
NTSTATUS
USBSTOR_SelectConfigurationAndInterface(
IN PDEVICE_OBJECT DeviceObject,
IN PFDO_DEVICE_EXTENSION DeviceExtension);
NTSTATUS
USBSTOR_GetPipeHandles(
IN PFDO_DEVICE_EXTENSION DeviceExtension);
//---------------------------------------------------------------------
//
// scsi.c routines
//
NTSTATUS
USBSTOR_HandleExecuteSCSI(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
NTSTATUS
USBSTOR_SendCSWRequest(
PFDO_DEVICE_EXTENSION FDODeviceExtension,
PIRP Irp);
//---------------------------------------------------------------------
//
// disk.c routines
//
NTSTATUS
USBSTOR_HandleInternalDeviceControl(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
NTSTATUS
USBSTOR_HandleDeviceControl(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
//---------------------------------------------------------------------
//
// queue.c routines
//
VOID
NTAPI
USBSTOR_StartIo(
PDEVICE_OBJECT DeviceObject,
PIRP Irp);
VOID
USBSTOR_QueueWaitForPendingRequests(
IN PDEVICE_OBJECT DeviceObject);
VOID
USBSTOR_QueueRelease(
IN PDEVICE_OBJECT DeviceObject);
BOOLEAN
USBSTOR_QueueAddIrp(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
VOID
NTAPI
USBSTOR_CancelIo(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
VOID
USBSTOR_QueueInitialize(
PFDO_DEVICE_EXTENSION FDODeviceExtension);
VOID
USBSTOR_QueueNextRequest(
IN PDEVICE_OBJECT DeviceObject);
VOID
USBSTOR_QueueTerminateRequest(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
//---------------------------------------------------------------------
//
// error.c routines
//
NTSTATUS
USBSTOR_GetEndpointStatus(
IN PDEVICE_OBJECT DeviceObject,
IN UCHAR bEndpointAddress,
OUT PUSHORT Value);
NTSTATUS
USBSTOR_ResetPipeWithHandle(
IN PDEVICE_OBJECT DeviceObject,
IN USBD_PIPE_HANDLE PipeHandle);
VOID
NTAPI
USBSTOR_TimerRoutine(
PDEVICE_OBJECT DeviceObject,
PVOID Context);
VOID
NTAPI
USBSTOR_QueueResetPipe(
IN PFDO_DEVICE_EXTENSION FDODeviceExtension);
VOID
NTAPI
USBSTOR_QueueResetDevice(
IN PFDO_DEVICE_EXTENSION FDODeviceExtension);
#endif // _USBSTOR_H_