mirror of
https://github.com/reactos/reactos.git
synced 2024-11-20 06:15:26 +00:00
ede3fddad7
- Import cmdcnst.h and vga.h headers from the 'vga_new' VGA Miniport Driver, that contain definitions related to VGA registers as well as command-stream functionality. - Replace a bunch of hardcoded values by their corresponding defintions. - Replace "Captain-Obvious" comments in VgaIsPresent() with actual explanations from the corresponding function in 'vga_new'. - Simplify the VgaInterpretCmdStream() function, based on the corresponding one from 'vga_new'. - Use concise comments in the 'AT_Initialization' command stream definition. - Import the 'VGA_640x480' initialization command stream from 'vga_new' and use it as the full VGA initialization stream whenever the HAL does not handle the VGA display (HalResetDisplay() returning FALSE). Otherwise we just use the 'AT_Initialization' command stream that performs minimal initialization. - Remove unused AT_Initialization and other declarations from ARM build.
220 lines
8.4 KiB
C
220 lines
8.4 KiB
C
/*
|
|
* PROJECT: ReactOS VGA Miniport Driver
|
|
* LICENSE: Microsoft NT4 DDK Sample Code License
|
|
* PURPOSE: Definitions for VGA
|
|
* PROGRAMMERS: Copyright (c) 1992 Microsoft Corporation
|
|
* ReactOS Portable Systems Group
|
|
*/
|
|
|
|
#ifndef _BOOTVID_VGA_H_
|
|
#define _BOOTVID_VGA_H_
|
|
|
|
#pragma once
|
|
|
|
#include "cmdcnst.h"
|
|
|
|
//
|
|
// Base address of VGA memory range. Also used as base address of VGA
|
|
// memory when loading a font, which is done with the VGA mapped at A0000.
|
|
//
|
|
|
|
#define MEM_VGA 0xA0000
|
|
#define MEM_VGA_SIZE 0x20000
|
|
|
|
//
|
|
// For memory mapped IO
|
|
//
|
|
|
|
#define MEMORY_MAPPED_IO_OFFSET (0xB8000 - 0xA0000)
|
|
|
|
//
|
|
// Port definitions for filling the ACCESS_RANGES structure in the miniport
|
|
// information, defines the range of I/O ports the VGA spans.
|
|
// There is a break in the IO ports - a few ports are used for the parallel
|
|
// port. Those cannot be defined in the ACCESS_RANGE, but are still mapped
|
|
// so all VGA ports are in one address range.
|
|
//
|
|
|
|
#define VGA_BASE_IO_PORT 0x000003B0
|
|
#define VGA_START_BREAK_PORT 0x000003BB
|
|
#define VGA_END_BREAK_PORT 0x000003C0
|
|
#define VGA_MAX_IO_PORT 0x000003DF
|
|
|
|
//
|
|
// VGA register definitions
|
|
//
|
|
// eVb: 3.1 [VGA] - Use offsets from the VGA Port Address instead of absolute
|
|
#define CRTC_ADDRESS_PORT_MONO 0x0004 // CRT Controller Address and
|
|
#define CRTC_DATA_PORT_MONO 0x0005 // Data registers in mono mode
|
|
#define FEAT_CTRL_WRITE_PORT_MONO 0x000A // Feature Control write port
|
|
// in mono mode
|
|
#define INPUT_STATUS_1_MONO 0x000A // Input Status 1 register read
|
|
// port in mono mode
|
|
#define ATT_INITIALIZE_PORT_MONO INPUT_STATUS_1_MONO
|
|
// Register to read to reset
|
|
// Attribute Controller index/data
|
|
|
|
#define ATT_ADDRESS_PORT 0x0010 // Attribute Controller Address and
|
|
#define ATT_DATA_WRITE_PORT 0x0010 // Data registers share one port
|
|
// for writes, but only Address is
|
|
// readable at 0x3C0
|
|
#define ATT_DATA_READ_PORT 0x0011 // Attribute Controller Data reg is
|
|
// readable here
|
|
#define MISC_OUTPUT_REG_WRITE_PORT 0x0012 // Miscellaneous Output reg write
|
|
// port
|
|
#define INPUT_STATUS_0_PORT 0x0012 // Input Status 0 register read
|
|
// port
|
|
#define VIDEO_SUBSYSTEM_ENABLE_PORT 0x0013 // Bit 0 enables/disables the
|
|
// entire VGA subsystem
|
|
#define SEQ_ADDRESS_PORT 0x0014 // Sequence Controller Address and
|
|
#define SEQ_DATA_PORT 0x0015 // Data registers
|
|
#define DAC_PIXEL_MASK_PORT 0x0016 // DAC pixel mask reg
|
|
#define DAC_ADDRESS_READ_PORT 0x0017 // DAC register read index reg,
|
|
// write-only
|
|
#define DAC_STATE_PORT 0x0017 // DAC state (read/write),
|
|
// read-only
|
|
#define DAC_ADDRESS_WRITE_PORT 0x0018 // DAC register write index reg
|
|
#define DAC_DATA_REG_PORT 0x0019 // DAC data transfer reg
|
|
#define FEAT_CTRL_READ_PORT 0x001A // Feature Control read port
|
|
#define MISC_OUTPUT_REG_READ_PORT 0x001C // Miscellaneous Output reg read
|
|
// port
|
|
#define GRAPH_ADDRESS_PORT 0x001E // Graphics Controller Address
|
|
#define GRAPH_DATA_PORT 0x001F // and Data registers
|
|
|
|
#define CRTC_ADDRESS_PORT_COLOR 0x0024 // CRT Controller Address and
|
|
#define CRTC_DATA_PORT_COLOR 0x0025 // Data registers in color mode
|
|
#define FEAT_CTRL_WRITE_PORT_COLOR 0x002A // Feature Control write port
|
|
#define INPUT_STATUS_1_COLOR 0x002A // Input Status 1 register read
|
|
// port in color mode
|
|
// eVb: 3.2 [END]
|
|
#define ATT_INITIALIZE_PORT_COLOR INPUT_STATUS_1_COLOR
|
|
// Register to read to reset
|
|
// Attribute Controller index/data
|
|
// toggle in color mode
|
|
|
|
//
|
|
// VGA indexed register indexes.
|
|
//
|
|
|
|
#define IND_CURSOR_START 0x0A // index in CRTC of the Cursor Start
|
|
#define IND_CURSOR_END 0x0B // and End registers
|
|
#define IND_CURSOR_HIGH_LOC 0x0E // index in CRTC of the Cursor Location
|
|
#define IND_CURSOR_LOW_LOC 0x0F // High and Low Registers
|
|
#define IND_VSYNC_END 0x11 // index in CRTC of the Vertical Sync
|
|
// End register, which has the bit
|
|
// that protects/unprotects CRTC
|
|
// index registers 0-7
|
|
#define IND_CR2C 0x2C // Nordic LCD Interface Register
|
|
#define IND_CR2D 0x2D // Nordic LCD Display Control
|
|
#define IND_SET_RESET_ENABLE 0x01 // index of Set/Reset Enable reg in GC
|
|
#define IND_DATA_ROTATE 0x03 // index of Data Rotate reg in GC
|
|
#define IND_READ_MAP 0x04 // index of Read Map reg in Graph Ctlr
|
|
#define IND_GRAPH_MODE 0x05 // index of Mode reg in Graph Ctlr
|
|
#define IND_GRAPH_MISC 0x06 // index of Misc reg in Graph Ctlr
|
|
#define IND_BIT_MASK 0x08 // index of Bit Mask reg in Graph Ctlr
|
|
#define IND_SYNC_RESET 0x00 // index of Sync Reset reg in Seq
|
|
#define IND_MAP_MASK 0x02 // index of Map Mask in Sequencer
|
|
#define IND_MEMORY_MODE 0x04 // index of Memory Mode reg in Seq
|
|
#define IND_CRTC_PROTECT 0x11 // index of reg containing regs 0-7 in
|
|
// CRTC
|
|
#define IND_CRTC_COMPAT 0x34 // index of CRTC Compatibility reg
|
|
// in CRTC
|
|
#define IND_PERF_TUNING 0x16 // index of performance tuning in Seq
|
|
#define START_SYNC_RESET_VALUE 0x01 // value for Sync Reset reg to start
|
|
// synchronous reset
|
|
#define END_SYNC_RESET_VALUE 0x03 // value for Sync Reset reg to end
|
|
// synchronous reset
|
|
|
|
//
|
|
// Values for Attribute Controller Index register to turn video off
|
|
// and on, by setting bit 5 to 0 (off) or 1 (on).
|
|
//
|
|
|
|
#define VIDEO_DISABLE 0
|
|
#define VIDEO_ENABLE 0x20
|
|
|
|
#define INDEX_ENABLE_AUTO_START 0x31
|
|
|
|
// Masks to keep only the significant bits of the Graphics Controller and
|
|
// Sequencer Address registers. Masking is necessary because some VGAs, such
|
|
// as S3-based ones, don't return unused bits set to 0, and some SVGAs use
|
|
// these bits if extensions are enabled.
|
|
//
|
|
|
|
#define GRAPH_ADDR_MASK 0x0F
|
|
#define SEQ_ADDR_MASK 0x07
|
|
|
|
//
|
|
// Mask used to toggle Chain4 bit in the Sequencer's Memory Mode register.
|
|
//
|
|
|
|
#define CHAIN4_MASK 0x08
|
|
|
|
//
|
|
// Value written to the Read Map register when identifying the existence of
|
|
// a VGA in VgaInitialize. This value must be different from the final test
|
|
// value written to the Bit Mask in that routine.
|
|
//
|
|
|
|
#define READ_MAP_TEST_SETTING 0x03
|
|
|
|
//
|
|
// Default text mode setting for various registers, used to restore their
|
|
// states if VGA detection fails after they've been modified.
|
|
//
|
|
|
|
#define MEMORY_MODE_TEXT_DEFAULT 0x02
|
|
#define BIT_MASK_DEFAULT 0xFF
|
|
#define READ_MAP_DEFAULT 0x00
|
|
|
|
|
|
//
|
|
// Palette-related info.
|
|
//
|
|
|
|
//
|
|
// Highest valid DAC color register index.
|
|
//
|
|
|
|
#define VIDEO_MAX_COLOR_REGISTER 0xFF
|
|
|
|
//
|
|
// Highest valid palette register index
|
|
//
|
|
|
|
#define VIDEO_MAX_PALETTE_REGISTER 0x0F
|
|
|
|
//
|
|
// Mode into which to put the VGA before starting a VDM, so it's a plain
|
|
// vanilla VGA. (This is the mode's index in ModesVGA[], currently standard
|
|
// 80x25 text mode.)
|
|
//
|
|
|
|
#define DEFAULT_MODE 0
|
|
|
|
//
|
|
// Number of bytes to save in each plane.
|
|
//
|
|
|
|
#define VGA_PLANE_SIZE 0x10000
|
|
|
|
//
|
|
// Number of each type of indexed register in a standard VGA, used by
|
|
// validator and state save/restore functions.
|
|
//
|
|
// Note: VDMs currently only support basic VGAs only.
|
|
//
|
|
|
|
#define VGA_NUM_SEQUENCER_PORTS 5
|
|
#define VGA_NUM_CRTC_PORTS 25
|
|
#define VGA_NUM_GRAPH_CONT_PORTS 9
|
|
#define VGA_NUM_ATTRIB_CONT_PORTS 21
|
|
#define VGA_NUM_DAC_ENTRIES 256
|
|
|
|
#define EXT_NUM_GRAPH_CONT_PORTS 0
|
|
#define EXT_NUM_SEQUENCER_PORTS 0
|
|
#define EXT_NUM_CRTC_PORTS 0
|
|
#define EXT_NUM_ATTRIB_CONT_PORTS 0
|
|
#define EXT_NUM_DAC_ENTRIES 0
|
|
|
|
#endif /* _BOOTVID_VGA_H_ */
|