reactos/Makefile
Timo Kreuzer 9ea495ba33 Create a branch for header work.
svn path=/branches/header-work/; revision=45691
2010-02-26 22:57:55 +00:00

635 lines
19 KiB
Makefile

# Well-known targets:
#
# all (default target)
# This target builds all of ReactOS.
#
# module
# These targets builds a single module. Replace module with the name of
# the module you want to build.
#
# bootcd
# This target builds an ISO (ReactOS.iso) from which ReactOS can be booted
# and installed.
#
# livecd
# This target builds an ISO (ReactOS-Live.iso) from which ReactOS can be
# booted, but not installed.
#
# install
# This target installs all of ReactOS to a location specified by the
# ROS_INSTALL environment variable.
#
# module_install
# These targets installs a single module to a location specified by the
# ROS_INSTALL environment variable. Replace module with the name of the
# module you want to install.
#
# clean
# This target cleans (deletes) all files that are generated when building
# ReactOS.
#
# module_clean
# These targets cleans (deletes) files that are generated when building a
# single module. Replace module with the name of the module you want to
# clean.
#
# depends
# This target does a complete dependency check of the ReactOS codebase.
# This can require several minutes to complete. If you only need to check
# dependencies for a single or few modules then you can use the
# module_depends targets instead. This target can also repair a damaged or
# missing makefile-${ROS_ARCH}.auto if needed.
#
# module_depends
# These targets do a dependency check of individual modules. Replace module
# with the name of the module for which you want to check dependencies.
# This is faster than the depends target which does a complete dependency
# check of the ReactOS codebase.
#
#
# Accepted environment variables:
#
# ROS_ARCH
# This variable specifies the name of the architecture to build ReactOS for.
# The variable defaults to i386.
#
# ROS_PREFIX
# This variable specifies the prefix of the MinGW installation. On Windows
# a prefix is usually not needed, but on linux it is usually "mingw32". If
# not present and no executable named "gcc" can be found, then the prefix is
# assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set
# ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc.
#
# ROS_INTERMEDIATE
# This variable controls where to put intermediate files. Intermediate
# files are generated files that are needed to generate the final
# output files. Examples of intermediate files include *.o, *.a, and
# *.coff. N.B. Don't put a path separator at the end. The variable
# defaults to .\obj-{ROS_ARCH}.
#
# ROS_OUTPUT
# This variable controls where to put output files. Output files are
# generated files that makes up the result of the build process.
# Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't
# put a path separator at the end. The variable defaults to .\output-{ROS_ARCH}.
#
# ROS_CDOUTPUT
# This variable controls the name of the ReactOS directory on cdrom.
# The variable defaults to reactos.
# Warning: setting this value may lead to a not bootable/installable cdrom.
#
# ROS_TEMPORARY
# This variable controls where to put temporary files. Temporary files
# are (usually small) generated files that are needed to generate the
# intermediate or final output files. Examples of temporary files include
# *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put
# a path separator at the end. The variable defaults to {ROS_INTERMEDIATE}
# directory.
#
# ROS_INSTALL
# This variable controls where to install output files to when using
# 'make install'. N.B. Don't put a path separator at the end. The variable
# defaults to .\{ROS_CDOUTPUT}.
#
# ROS_BUILDMAP
# This variable controls if map files are to be generated for executable
# output files. Map files have the extension .map. The value can be either
# full (to build map files with assembly code), yes (to build map files
# without source code) or no (to not build any map files). The variable
# defaults to no.
#
# ROS_BUILDNOSTRIP
# This variable controls if non-symbol-stripped versions are to be built
# of executable output files. Non-symbol-stripped executable output files
# have .nostrip added to the filename just before the extension. The value
# can be either yes (to build non-symbol-stripped versions of executable
# output files) or no (to not build non-symbol-stripped versions of
# executable output files). The variable defaults to no.
#
# ROS_LEAN_AND_MEAN
# This variable controls if all binaries should be stripped out of useless
# data added by GCC/LD as well as of RSYM symbol data. Output binary size
# will go from 80 to 40MB, memory usage from 58 to 38MB and the install CD
# from 18 to 13MB. The variable defaults to no.
#
# ROS_GENERATE_RSYM
# This variable controls generation of RSYM symbol data. The value can be
# either yes (to generate symbol data) or no. The variable defaults to yes.
#
# ROS_RBUILDFLAGS
# Pass parameters to rbuild.
# -v Be verbose.
# -c Clean as you go. Delete generated files as soon as they are not needed anymore.
# -dd Disable automatic dependencies.
# -da Enable automatic dependencies.
# -df Enable full dependencies.
# -dm{module} Check only automatic dependencies for this module.
# -hd Disable precompiled headers.
# -mi Let make handle creation of install directories. Rbuild will not generate the directories.
# -ps Generate proxy makefiles in source tree instead of the output tree.
# -ud Disable compilation units.
# -r Input XML
#
# ROS_AUTOMAKE
# Alternate name of makefile-${ROS_ARCH}.auto
#
# ROS_BUILDENGINE
# The Build engine to be used. The variable defaults to rbuild (RBUILD_TARGET)
#
# check for versions of make that don't have features we need...
# the function "eval" is only available in 3.80+, which happens to be the minimum
# version that has the features we use...
# THIS CHECK IS BORROWED FROM THE "GMSL" PROJECT, AND IS COVERED BY THE GPL LICENSE
# YOU CAN FIND OUT MORE ABOUT GMSL - A VERY COOL PROJECT - AT:
# http://gmsl.sourceforge.net/
__gmsl_have_eval :=
__gmsl_ignore := $(eval __gmsl_have_eval := T)
ifndef __gmsl_have_eval
$(error ReactOS's makefiles use GNU Make 3.80+ features, you have $(MAKE_VERSION), you MUST UPGRADE in order to build ReactOS - Sorry)
endif
# END of code borrowed from GMSL ( http://gmsl.sourceforge.net/ )
define NL
endef
.PHONY: all
.PHONY: clean
.PHONY: world
.PHONY: universe
ifneq ($(ROS_ARCH),)
ARCH := $(ROS_ARCH)
else
ARCH := i386
endif
ifeq ($(ROS_AUTOMAKE),)
ROS_AUTOMAKE=makefile-$(ARCH).auto
endif
all: $(ROS_AUTOMAKE)
.SUFFIXES:
ifeq ($(HOST),)
ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32)
ifeq ($(findstring msys,$(shell sh --version 2>nul)),msys)
export OSTYPE = msys
HOST=mingw32-linux
HOST_CFLAGS+=-fshort-wchar
HOST_CPPFLAGS+=-fshort-wchar
else
HOST=mingw32-windows
endif
else
HOST=mingw32-linux
HOST_CFLAGS+=-fshort-wchar
HOST_CPPFLAGS+=-fshort-wchar
endif
endif
# Default to half-verbose mode
ifeq ($(VERBOSE),no)
Q = @
HALFVERBOSEECHO = no
BUILDNO_QUIET = -q
else
ifeq ($(VERBOSE),full)
Q =
HALFVERBOSEECHO = no
BUILDNO_QUIET =
else
Q = @
HALFVERBOSEECHO = yes
BUILDNO_QUIET = -q
endif
endif
ifeq ($(HOST),mingw32-linux)
QUOTE = "
else
QUOTE =
endif
ifeq ($(HALFVERBOSEECHO),yes)
ECHO_CP =@echo $(QUOTE)[COPY] $@$(QUOTE)
ECHO_MKDIR =@echo $(QUOTE)[MKDIR] $@$(QUOTE)
ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO] $@$(QUOTE)
ECHO_INVOKE =@echo $(QUOTE)[INVOKE] $<$(QUOTE)
ECHO_PCH =@echo $(QUOTE)[PCH] $@$(QUOTE)
ECHO_CPP =@echo $(QUOTE)[CPP] $@$(QUOTE)
ECHO_CC =@echo $(QUOTE)[CC] $<$(QUOTE)
ECHO_HOSTCC =@echo $(QUOTE)[HOST-CC] $<$(QUOTE)
ECHO_CL =@echo $(QUOTE)[CL] $<$(QUOTE)
ECHO_AS =@echo $(QUOTE)[AS] $<$(QUOTE)
ECHO_NASM =@echo $(QUOTE)[NASM] $<$(QUOTE)
ECHO_AR =@echo $(QUOTE)[AR] $@$(QUOTE)
ECHO_HOSTAR =@echo $(QUOTE)[HOST-AR] $@$(QUOTE)
ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD] $@$(QUOTE)
ECHO_WRC =@echo $(QUOTE)[WRC] $@$(QUOTE)
ECHO_RC =@echo $(QUOTE)[RC] $@$(QUOTE)
ECHO_CVTRES =@echo $(QUOTE)[CVTRES] $@$(QUOTE)
ECHO_WIDL =@echo $(QUOTE)[WIDL] $@$(QUOTE)
ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES] $<$(QUOTE)
ECHO_IMPLIB =@echo $(QUOTE)[IMPLIB] $@$(QUOTE)
ECHO_LD =@echo $(QUOTE)[LD] $@$(QUOTE)
ECHO_HOSTLD =@echo $(QUOTE)[HOST-LD] $@$(QUOTE)
ECHO_LINK =@echo $(QUOTE)[LINK] $@$(QUOTE)
ECHO_NM =@echo $(QUOTE)[NM] $@$(QUOTE)
ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP] $@$(QUOTE)
ECHO_RBUILD =@echo $(QUOTE)[RBUILD] $@$(QUOTE)
ECHO_RSYM =@echo $(QUOTE)[RSYM] $@$(QUOTE)
ECHO_PEFIXUP =@echo $(QUOTE)[PEFIXUP] $@$(QUOTE)
ECHO_WMC =@echo $(QUOTE)[WMC] $@$(QUOTE)
ECHO_NCI =@echo $(QUOTE)[NCI] $@$(QUOTE)
ECHO_CABMAN =@echo $(QUOTE)[CABMAN] $<$(QUOTE)
ECHO_CDMAKE =@echo $(QUOTE)[CDMAKE] $@$(QUOTE)
ECHO_MKHIVE =@echo $(QUOTE)[MKHIVE] $@$(QUOTE)
ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE)
ECHO_TEST =@echo $(QUOTE)[TEST] $@$(QUOTE)
ECHO_GENDIB =@echo $(QUOTE)[GENDIB] $@$(QUOTE)
ECHO_STRIP =@echo $(QUOTE)[STRIP] $@$(QUOTE)
ECHO_RGENSTAT=@echo $(QUOTE)[RGENSTAT] $@$(QUOTE)
ECHO_DEPENDS =@echo $(QUOTE)[DEPENDS] $<$(QUOTE)
ECHO_RSP =@echo $(QUOTE)[RSP] $@$(QUOTE)
else
ECHO_CP =
ECHO_MKDIR =
ECHO_BUILDNO =
ECHO_INVOKE =
ECHO_PCH =
ECHO_CPP =
ECHO_CC =
ECHO_HOSTCC =
ECHO_AS =
ECHO_NASM =
ECHO_AR =
ECHO_HOSTAR =
ECHO_WINEBLD =
ECHO_WRC =
ECHO_RC =
ECHO_CVTRES =
ECHO_WIDL =
ECHO_BIN2RES =
ECHO_IMPLIB =
ECHO_LD =
ECHO_HOSTLD =
ECHO_NM =
ECHO_OBJDUMP =
ECHO_RBUILD =
ECHO_RSYM =
ECHO_WMC =
ECHO_NCI =
ECHO_CABMAN =
ECHO_CDMAKE =
ECHO_MKHIVE =
ECHO_REGTESTS=
ECHO_TEST =
ECHO_GENDIB =
ECHO_STRIP =
ECHO_RGENSTAT=
ECHO_DEPENDS =
ECHO_RSP =
endif
# Set host compiler/linker
ifeq ($(HOST_CC),)
HOST_CC = gcc
endif
ifeq ($(HOST_CPP),)
HOST_CPP = g++
endif
host_gcc = $(Q)$(HOST_CC)
host_gpp = $(Q)$(HOST_CPP)
host_ld = $(Q)ld
host_ar = $(Q)ar
host_objcopy = $(Q)objcopy
# Set target compiler/linker
ifneq ($(ROS_PREFIX),)
PREFIX_ := $(ROS_PREFIX)-
else
ifeq ($(HOST),mingw32-linux)
PREFIX_ := mingw32-
else
PREFIX_ :=
endif
endif
ifeq ($(TARGET_CC),)
TARGET_CC = $(PREFIX_)gcc
endif
ifeq ($(TARGET_CPP),)
TARGET_CPP = $(PREFIX_)g++
endif
gcc = $(Q)$(TARGET_CC)
gpp = $(Q)$(TARGET_CPP)
gas = $(Q)$(TARGET_CC) -x assembler-with-cpp
ld = $(Q)$(PREFIX_)ld
nm = $(Q)$(PREFIX_)nm
objdump = $(Q)$(PREFIX_)objdump
ar = $(Q)$(PREFIX_)ar
objcopy = $(Q)$(PREFIX_)objcopy
dlltool = $(Q)$(PREFIX_)dlltool
strip = $(Q)$(PREFIX_)strip
windres = $(Q)$(PREFIX_)windres
# Set utilities
ifeq ($(OSTYPE),msys)
HOST=mingw32-linux
endif
ifeq ($(HOST),mingw32-linux)
ifeq ($(OSTYPE),msys)
export EXEPOSTFIX = .exe
else
export EXEPOSTFIX =
endif
export SEP = /
mkdir = -$(Q)mkdir -p
checkpoint = $(Q)touch
rm = $(Q)rm -f
cp = $(Q)cp
NUL = /dev/null
else # mingw32-windows
export EXEPOSTFIX = .exe
ROS_EMPTY =
export SEP = \$(ROS_EMPTY)
mkdir = -$(Q)mkdir
checkpoint = $(Q)copy /y NUL
rm = $(Q)del /f /q
cp = $(Q)copy /y
NUL = NUL
endif
ifneq ($(ROS_INTERMEDIATE),)
INTERMEDIATE := $(ROS_INTERMEDIATE)
else
INTERMEDIATE := obj-$(ARCH)
endif
INTERMEDIATE_ := $(INTERMEDIATE)$(SEP)
ifneq ($(ROS_OUTPUT),)
OUTPUT := $(ROS_OUTPUT)
else
OUTPUT := output-$(ARCH)
endif
OUTPUT_ := $(OUTPUT)$(SEP)
ifneq ($(ROS_CDOUTPUT),)
CDOUTPUT := $(ROS_CDOUTPUT)
else
CDOUTPUT := reactos
endif
CDOUTPUT_ := $(CDOUTPUT)$(SEP)
ifneq ($(ROS_TEMPORARY),)
TEMPORARY := $(ROS_TEMPORARY)
else
TEMPORARY := $(INTERMEDIATE)
endif
TEMPORARY_ := $(TEMPORARY)$(SEP)
ifneq ($(ROS_INSTALL),)
INSTALL := $(ROS_INSTALL)
else
INSTALL := $(CDOUTPUT)
endif
INSTALL_ := $(INSTALL)$(SEP)
RBUILD_FLAGS := -rReactOS-$(ARCH).rbuild -DARCH=$(ARCH)
$(INTERMEDIATE):
$(ECHO_MKDIR)
${mkdir} $@
ifneq ($(INTERMEDIATE),$(OUTPUT))
$(OUTPUT):
$(ECHO_MKDIR)
${mkdir} $@
endif
ifneq ($(TEMPORARY),$(INTERMEDIATE))
ifneq ($(TEMPORARY),$(OUTPUT))
$(TEMPORARY):
$(ECHO_MKDIR)
${mkdir} $@
endif
endif
BUILDNO_H = $(INTERMEDIATE_)include$(SEP)reactos$(SEP)buildno.h
include lib/lib.mak
include tools/tools.mak
-include $(ROS_AUTOMAKE)
PREAUTO := \
$(BIN2C_TARGET) \
$(BIN2RES_TARGET) \
$(BUILDNO_H) \
$(GENDIB_DIB_FILES) \
$(NCI_SERVICE_FILES)
ifeq ($(ARCH),powerpc)
PREAUTO += $(OFW_INTERFACE_SERVICE_FILES) $(PPCMMU_TARGETS)
endif
ifeq ($(ROS_BUILDENGINE),)
ROS_BUILDENGINE=$(RBUILD_TARGET)
endif
$(ROS_AUTOMAKE): $(ROS_BUILDENGINE) $(XMLBUILDFILES) | $(PREAUTO)
${mkdir} $(OUTPUT_)media$(SEP)inf 2>$(NUL)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) mingw
world: all bootcd livecd
universe:
$(MAKE) KDBG=1 DBG=1 \
ROS_AUTOMAKE=makefile-$(ARCH)-kd.auto \
ROS_INSTALL=reactos-$(ARCH)-kd \
ROS_INTERMEDIATE=obj-$(ARCH)-kd \
ROS_OUTPUT=output-$(ARCH)-kd \
world
$(MAKE) KDBG=0 DBG=1 \
ROS_AUTOMAKE=makefile-$(ARCH)-d.auto \
ROS_INSTALL=reactos-$(ARCH)-d \
ROS_INTERMEDIATE=obj-$(ARCH)-d \
ROS_OUTPUT=output-$(ARCH)-d \
world
$(MAKE) KDBG=0 DBG=0 \
ROS_AUTOMAKE=makefile-$(ARCH)-r.auto \
ROS_INSTALL=reactos-$(ARCH)-r \
ROS_INTERMEDIATE=obj-$(ARCH)-r \
ROS_OUTPUT=output-$(ARCH)-r \
world
.PHONY: rgenstat
rgenstat: $(RGENSTAT_TARGET)
$(ECHO_RGENSTAT)
$(Q)$(RGENSTAT_TARGET) apistatus.lst apistatus.xml
.PHONY: cb
cb: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) cb
.PHONY: msbuild
msbuild: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) msbuild
.PHONY: msbuild_clean
msbuild_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c msbuild
.PHONY: depmap
depmap: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) depmap
.PHONY: vreport
vreport:$(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) vreport
.PHONY: msvc
msvc: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) msvc
.PHONY: msvc6
msvc6: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs6.00 -voversionconfiguration msvc
.PHONY: msvc7
msvc7: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.00 -voversionconfiguration msvc
.PHONY: msvc71
msvc71: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.10 -voversionconfiguration msvc
.PHONY: msvc8
msvc8: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs8.00 -voversionconfiguration msvc
.PHONY: msvc9
msvc9: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs9.00 -voversionconfiguration msvc
.PHONY: msvc10
msvc10: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs10.00 -voversionconfiguration msvc
.PHONY: msvc6_clean
msvc6_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs6.00 -voversionconfiguration msvc
.PHONY: msvc7_clean
msvc7_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs7.00 -voversionconfiguration msvc
.PHONY: msvc71_clean
msvc71_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs7.10 -voversionconfiguration msvc
.PHONY: msvc8_clean
msvc8_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs8.00 -voversionconfiguration msvc
.PHONY: msvc9_clean
msvc9_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs9.00 -voversionconfiguration msvc
.PHONY: msvc10_clean
msvc10_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs10.00 -voversionconfiguration msvc
.PHONY: msvc_clean
msvc_clean: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c msvc
.PHONY: msvc_clean_all
msvc_clean_all: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs6.00 -voversionconfiguration msvc
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs7.00 -voversionconfiguration msvc
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs7.10 -voversionconfiguration msvc
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -c -vs8.10 -voversionconfiguration msvc
.PHONY: msvc7_install_debug
msvc7_install_debug: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.00 -vcdebug -voversionconfiguration msvc
.PHONY: msvc7_install_release
msvc7_install_release: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.00 -vcrelease -voversionconfiguration msvc
.PHONY: msvc7_install_speed
msvc7_install_speed: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.00 -vcspeed -voversionconfiguration msvc
.PHONY: msvc71_install_debug
msvc71_install_debug: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.10 -vcdebug -voversionconfiguration msvc
.PHONY: msvc71_install_release
msvc71_install_release: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.10 -vcrelease -voversionconfiguration msvc
.PHONY: msvc71_install_speed
msvc71_install_speed: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs7.10 -vcspeed -voversionconfiguration msvc
.PHONY: msvc8_install_debug
msvc8_install_debug: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs8.00 -vcdebug -voversionconfiguration msvc
.PHONY: msvc8_install_release
msvc8_install_release: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs8.00 -vcrelease -voversionconfiguration msvc
.PHONY: msvc8_install_speed
msvc8_install_speed: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) -vs8.00 -vcspeed -voversionconfiguration msvc
.PHONY: makefile_auto_clean
makefile_auto_clean:
-@$(rm) $(ROS_AUTOMAKE) $(PREAUTO) 2>$(NUL)
.PHONY: clean
clean: makefile_auto_clean
.PHONY: depends
depends: $(ROS_BUILDENGINE)
$(ECHO_RBUILD)
$(Q)$(ROS_BUILDENGINE) $(RBUILD_FLAGS) $(ROS_RBUILDFLAGS) mingw