reactos/drivers/storage/floppy/hardware.c

/*
 *  ReactOS Floppy Driver
 *  Copyright (C) 2004, Vizzini (vizzini@plasmic.com)
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * PROJECT:         ReactOS Floppy Driver
 * FILE:            hardware.c
 * PURPOSE:         FDC Hardware control routines
 * PROGRAMMER:      Vizzini (vizzini@plasmic.com)
 * REVISIONS:
 *                  15-Feb-2004 vizzini - Created
 * NOTES:
 *     - Many of these functions are based directly on information from the
 *       Intel datasheet for their enhanced floppy controller.  Send_Byte and
 *       Get_Byte are direct C implementations of their flowcharts, and the
 *       read/write routine and others are loose adaptations of their charts.
 *     - These routines are generally designed to be small, atomic operations.  They
 *       do not wait for interrupts, deal with DMA, or do any other Windows-
 *       specific things, unless they have to.
 *     - If you compare this to Microsoft samples or to the old ReactOS driver,
 *       or even to the linux driver, you will notice a big difference:  we use
 *       a system thread to drain the queue.  This is because it's illegal to block
 *       in a dispatch routine, unless you're a top-level driver (which we absolutely
 *       are not).  One big reason is that we may be called at raised IRQL, at which
 *       it's illegal to block.  The floppy controller is a *dumb* piece of hardware,
 *       too - it is slow and difficult to deal with.  The solution is to do all
 *       of the blocking and servicing of the controller in a dedicated worker
 *       thread.
 *     - Some information taken from Intel 82077AA data sheet (order #290166-007)
 *
 * TODO: ATM the constants defined in hardware.h *might* be shifted to line up
 *       with the bit position in the register, or they *might not*.  This should
 *       all be converted to standardize on absolute values or shifts.
 *       I prefer bit fields, but they break endianness.
 */

#include "precomp.h"

#include <debug.h>

/*
 * Hardware Support Routines
 */

static BOOLEAN NTAPI
ReadyForWrite(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Determine of the controller is ready to accept a byte on the FIFO
 * ARGUMENTS:
 *     ControllerInfo: Info structure for the FDC we're testing
 * RETURNS:
 *     TRUE if the controller can accept a byte right now
 *     FALSE otherwise
 * NOTES:
 *     - it is necessary to check both that the FIFO is set to "outbound"
 *       and that the "ready for i/o" bit is set.
 */
{
    UCHAR Status = READ_PORT_UCHAR(ControllerInfo->BaseAddress + MAIN_STATUS_REGISTER);

    if(Status & MSR_IO_DIRECTION) /* 0 for out */
        return FALSE;

    if(!(Status & MSR_DATA_REG_READY_FOR_IO))
        return FALSE;

    return TRUE;
}


static BOOLEAN NTAPI
ReadyForRead(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Determine of the controller is ready to read a byte on the FIFO
 * ARGUMENTS:
 *     ControllerInfo: Info structure for the FDC we're testing
 * RETURNS:
 *     TRUE if the controller can read a byte right now
 *     FALSE otherwise
 * NOTES:
 *     - it is necessary to check both that the FIFO is set to "inbound"
 *       and that the "ready for i/o" bit is set.
 */
{
    UCHAR Status = READ_PORT_UCHAR(ControllerInfo->BaseAddress + MAIN_STATUS_REGISTER);

    if(!(Status & MSR_IO_DIRECTION)) /* Read = 1 */
        return FALSE;

    if(!(Status & MSR_DATA_REG_READY_FOR_IO))
        return FALSE;

    return TRUE;
}


static NTSTATUS NTAPI
Send_Byte(PCONTROLLER_INFO ControllerInfo, UCHAR Byte)
/*
 * FUNCTION: Send a byte from the host to the controller's FIFO
 * ARGUMENTS:
 *     ControllerInfo: Info structure for the controller we're writing to
 *     Offset: Offset over the controller's base address that we're writing to
 *     Byte: Byte to write to the bus
 * RETURNS:
 *     STATUS_SUCCESS if the byte was written successfully
 *     STATUS_UNSUCCESSFUL if not
 * NOTES:
 *     - Function designed after flowchart in intel datasheet
 *     - 250us max delay.  Note that this is exactly 5 times longer
 *       than Microsoft recommends stalling the processor
 *     - PAGED_CODE, because we spin for more than the Microsoft-recommended
 *       maximum.
 *     - This function is necessary because sometimes the FIFO reacts slowly
 *       and isn't yet ready to read or write the next byte
 */
{
    int i;

    PAGED_CODE();

    for(i = 0; i < 5; i++)
    {
        if(ReadyForWrite(ControllerInfo))
            break;

        KeStallExecutionProcessor(50);
    }

    if (i < 5)
    {
        WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + FIFO, Byte);
        return STATUS_SUCCESS;
    }
    else
    {
        INFO_(FLOPPY, "Send_Byte: timed out trying to write\n");
        HwDumpRegisters(ControllerInfo);
        return STATUS_UNSUCCESSFUL;
    }
}


static NTSTATUS NTAPI
Get_Byte(PCONTROLLER_INFO ControllerInfo, PUCHAR Byte)
/*
 * FUNCTION: Read a byte from the controller to the host
 * ARGUMENTS:
 *     ControllerInfo: Info structure for the controller we're reading from
 *     Offset: Offset over the controller's base address  that we're reading from
 *     Byte: Byte to read from the bus
 * RETURNS:
 *     STATUS_SUCCESS if the byte was read successfully
 *     STATUS_UNSUCCESSFUL if not
 * NOTES:
 *     - Function designed after flowchart in intel datasheet
 *     - 250us max delay.  Note that this is exactly 5 times longer
 *       than Microsoft recommends stalling the processor
 *     - Remember that we can be interrupted here, so this might
 *       take much more wall clock time than 250us
 *     - PAGED_CODE because we spin for longer than Microsoft recommends
 */
{
    int i;

    PAGED_CODE();

    for(i = 0; i < 5; i++)
    {
        if(ReadyForRead(ControllerInfo))
            break;

        KeStallExecutionProcessor(50);
    }

    if (i < 5)
    {
        *Byte = READ_PORT_UCHAR(ControllerInfo->BaseAddress + FIFO);
        return STATUS_SUCCESS;
    }
    else
    {
        INFO_(FLOPPY, "Get_Byte: timed out trying to write\n");
        HwDumpRegisters(ControllerInfo);
        return STATUS_UNSUCCESSFUL;
    }
}


NTSTATUS NTAPI
HwSetDataRate(PCONTROLLER_INFO ControllerInfo, UCHAR DataRate)
/*
 * FUNCTION: Set the data rte on a controller
 * ARGUMENTS:
 *     ControllerInfo: Controller whose rate is being set
 *     DataRate: Data rate code to set the controller to
 * RETURNS:
 *     STATUS_SUCCESS
 */
{
    TRACE_(FLOPPY, "HwSetDataRate called; writing rate code 0x%x to offset 0x%x\n", DataRate, DATA_RATE_SELECT_REGISTER);

    WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + DATA_RATE_SELECT_REGISTER, DataRate);

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwTurnOffMotor(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Turn off all motors
 * ARGUMENTS:
 *     DriveInfo: drive to turn off
 * RETURNS:
 *     STATUS_SUCCESS if the motor is successfully turned off
 * NOTES:
 *     - Don't call this routine directly unless you've thought about it
 *       and read the source to StartMotor() and StopMotor().
 *     - Called at DISPATCH_LEVEL
 */
{
    TRACE_(FLOPPY, "HwTurnOffMotor: writing byte 0x%x to offset 0x%x\n", DOR_FDC_ENABLE|DOR_DMA_IO_INTERFACE_ENABLE, DIGITAL_OUTPUT_REGISTER);

    WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_OUTPUT_REGISTER, DOR_FDC_ENABLE|DOR_DMA_IO_INTERFACE_ENABLE);

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwTurnOnMotor(PDRIVE_INFO DriveInfo)
/*
 * FUNCTION: Turn on the motor on the selected drive
 * ARGUMENTS:
 *     DriveInfo: drive to turn on
 * RETURNS:
 *     STATUS_SUCCESS if the motor is successfully turned on
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - Doesn't interrupt
 *     - Currently cannot fail
 */
{
    PCONTROLLER_INFO ControllerInfo = DriveInfo->ControllerInfo;
    UCHAR Unit = DriveInfo->UnitNumber;
    UCHAR Buffer;

    PAGED_CODE();

    /* turn on motor */
    Buffer = Unit;

    Buffer |= DOR_FDC_ENABLE;
    Buffer |= DOR_DMA_IO_INTERFACE_ENABLE;

    if(Unit == 0)
        Buffer |= DOR_FLOPPY_MOTOR_ON_A;
    else if (Unit == 1)
        Buffer |= DOR_FLOPPY_MOTOR_ON_B;
    else if (Unit == 2)
        Buffer |= DOR_FLOPPY_MOTOR_ON_C;
    else if (Unit == 3)
        Buffer |= DOR_FLOPPY_MOTOR_ON_D;

    TRACE_(FLOPPY, "HwTurnOnMotor: writing byte 0x%x to offset 0x%x\n", Buffer, DIGITAL_OUTPUT_REGISTER);
    WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_OUTPUT_REGISTER, Buffer);

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwSenseDriveStatus(PDRIVE_INFO DriveInfo)
/*
 * FUNCTION: Start a sense status command
 * ARGUMENTS:
 *     DriveInfo: Drive to inquire about
 * RETURNS:
 *     STATUS_SUCCESS if the command is successfully queued to the controller
 *     STATUS_UNSUCCESSFUL if not
 * NOTES:
 *     - Generates an interrupt
 *     - hard-wired to head 0
 */
{
    UCHAR Buffer[2];
    int i;

    PAGED_CODE();

    TRACE_(FLOPPY, "HwSenseDriveStatus called\n");

    Buffer[0] = COMMAND_SENSE_DRIVE_STATUS;
    Buffer[1] = DriveInfo->UnitNumber; /* hard-wired to head 0 for now */

    for(i = 0; i < 2; i++)
        if(Send_Byte(DriveInfo->ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwSenseDriveStatus: failed to write FIFO\n");
            return STATUS_UNSUCCESSFUL;
        }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwReadWriteData(PCONTROLLER_INFO ControllerInfo,
                BOOLEAN Read,
                UCHAR Unit,
                UCHAR Cylinder,
                UCHAR Head,
                UCHAR Sector,
                UCHAR BytesPerSector,
                UCHAR EndOfTrack,
                UCHAR Gap3Length,
                UCHAR DataLength)
/*
 * FUNCTION: Read or write data to the drive
 * ARGUMENTS:
 *     ControllerInfo: controller to target the read/write request to
 *     Read: TRUE if the device should be read; FALSE if written
 *     Unit: Drive number to target
 *     Cylinder: cylinder to start the read on
 *     Head: head to start the read on
 *     Sector: sector to start the read on (1-based!)
 *     BytesPerSector: sector size constant (hardware.h)
 *     EndOfTrack: Marks the last sector number to read/write on the track
 *     Gap3Length: Gap length for the operation
 *     DataLength: Bytes to read, *unless* BytesPerSector is specified
 * RETURNS:
 *     STATUS_SUCCESS if the operation was successfully queued to the controller
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - Generates an interrupt
 */
{
    UCHAR Buffer[9];
    int i;

    PAGED_CODE();

    /* Shouldn't be using DataLength in this driver */
    ASSERT(DataLength == 0xff);

    /* Build the command to send */
    if(Read)
        Buffer[0] = COMMAND_READ_DATA;
    else
        Buffer[0] = COMMAND_WRITE_DATA;

    Buffer[0] |= READ_DATA_MFM | READ_DATA_MT;

    Buffer[1] = (Head << COMMAND_HEAD_NUMBER_SHIFT) | Unit;
    Buffer[2] = Cylinder;
    Buffer[3] = Head;
    Buffer[4] = Sector;
    Buffer[5] = BytesPerSector;
    Buffer[6] = EndOfTrack;
    Buffer[7] = Gap3Length;
    Buffer[8] = DataLength;

    /* Send the command */
    for(i = 0; i < 9; i++)
    {
        INFO_(FLOPPY, "HwReadWriteData: Sending a command byte to the FIFO: 0x%x\n", Buffer[i]);

        if(Send_Byte(ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwReadWriteData: Unable to write to the FIFO\n");
            return STATUS_UNSUCCESSFUL;
        }
    }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwRecalibrateResult(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Get the result of a recalibrate command
 * ARGUMENTS:
 *     ControllerInfo: controller to query
 * RETURNS:
 *     STATUS_SUCCESS if the recalibratewas a success
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - This function tests the error conditions itself, and boils the
 *       whole thing down to a single SUCCESS or FAILURE result
 *     - Called post-interrupt; does not interrupt
 * TODO
 *     - perhaps handle more status
 */
{
    UCHAR Buffer[2];
    int i;

    PAGED_CODE();

    if(Send_Byte(ControllerInfo, COMMAND_SENSE_INTERRUPT_STATUS) != STATUS_SUCCESS)
    {
        WARN_(FLOPPY, "HwRecalibrateResult: Unable to write the controller\n");
        return STATUS_UNSUCCESSFUL;
    }

    for(i = 0; i < 2; i++)
        if(Get_Byte(ControllerInfo, &Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwRecalibrateResult: unable to read FIFO\n");
            return STATUS_UNSUCCESSFUL;
        }

    /* Validate  that it did what we told it to */
    INFO_(FLOPPY, "HwRecalibrateResult results: ST0: 0x%x PCN: 0x%x\n", Buffer[0], Buffer[1]);

    /*
     * Buffer[0] = ST0
     * Buffer[1] = PCN
     */

    /* Is the PCN 0? */
    if(Buffer[1] != 0)
    {
        WARN_(FLOPPY, "HwRecalibrateResult: PCN not 0\n");
        return STATUS_UNSUCCESSFUL;
    }

    /* test seek complete */
    if((Buffer[0] & SR0_SEEK_COMPLETE) != SR0_SEEK_COMPLETE)
    {
        WARN_(FLOPPY, "HwRecalibrateResult: Failed to complete the seek\n");
        return STATUS_UNSUCCESSFUL;
    }

    /* Is the equipment check flag set?  Could be no disk in drive... */
    if((Buffer[0] & SR0_EQUIPMENT_CHECK) == SR0_EQUIPMENT_CHECK)
    {
        WARN_(FLOPPY, "HwRecalibrateResult: Seeked to track 0 successfully, but EC is set; returning failure\n");
        return STATUS_UNSUCCESSFUL;
    }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwReadWriteResult(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Get the result of a read or write from the controller
 * ARGUMENTS:
 *     ControllerInfo: controller to query
 * RETURNS:
 *     STATUS_SUCCESS if the read/write was a success
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - This function tests the error conditions itself, and boils the
 *       whole thing down to a single SUCCESS or FAILURE result
 *     - Called post-interrupt; does not interrupt
 * TODO:
 *     - perhaps handle more status
 */
{
    UCHAR Buffer[7];
    int i;

    PAGED_CODE();

    for(i = 0; i < 7; i++)
        if(Get_Byte(ControllerInfo, &Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwReadWriteResult: unable to read fifo\n");
            return STATUS_UNSUCCESSFUL;
        }

    /* Validate  that it did what we told it to */
    INFO_(FLOPPY, "HwReadWriteResult results: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", Buffer[0], Buffer[1], Buffer[2], Buffer[3],
          Buffer[4], Buffer[5], Buffer[6]);

    /* Last command successful? */
    if((Buffer[0] & SR0_LAST_COMMAND_STATUS) != SR0_LCS_SUCCESS)
        return STATUS_UNSUCCESSFUL;

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwRecalibrate(PDRIVE_INFO DriveInfo)
/*
 * FUNCTION: Start a recalibration of a drive
 * ARGUMENTS:
 *     DriveInfo: Drive to recalibrate
 * RETURNS:
 *     STATUS_SUCCESS if the command was successfully queued to the controller
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - Generates an interrupt
 */
{
    PCONTROLLER_INFO ControllerInfo = DriveInfo->ControllerInfo;
    UCHAR Unit = DriveInfo->UnitNumber;
    UCHAR Buffer[2];
    int i;

    TRACE_(FLOPPY, "HwRecalibrate called\n");

    PAGED_CODE();

    Buffer[0] = COMMAND_RECALIBRATE;
    Buffer[1] = Unit;

    for(i = 0; i < 2; i++)
        if(Send_Byte(ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwRecalibrate: unable to write FIFO\n");
            return STATUS_UNSUCCESSFUL;
        }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwSenseInterruptStatus(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Send a sense interrupt status command to a controller
 * ARGUMENTS:
 *     ControllerInfo: controller to queue the command to
 * RETURNS:
 *     STATUS_SUCCESS if the command is queued successfully
 *     STATUS_UNSUCCESSFUL if not
 */
{
    UCHAR Buffer[2];
    int i;

    PAGED_CODE();

    if(Send_Byte(ControllerInfo, COMMAND_SENSE_INTERRUPT_STATUS) != STATUS_SUCCESS)
    {
        WARN_(FLOPPY, "HwSenseInterruptStatus: failed to write controller\n");
        return STATUS_UNSUCCESSFUL;
    }

    for(i = 0; i  < 2; i++)
    {
        if(Get_Byte(ControllerInfo, &Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwSenseInterruptStatus: failed to read controller\n");
            return STATUS_UNSUCCESSFUL;
        }
    }

    INFO_(FLOPPY, "HwSenseInterruptStatus returned 0x%x 0x%x\n", Buffer[0], Buffer[1]);

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwReadId(PDRIVE_INFO DriveInfo, UCHAR Head)
/*
 * FUNCTION: Issue a read id command to the drive
 * ARGUMENTS:
 *     DriveInfo: Drive to read id from
 *     Head: Head to read the ID from
 * RETURNS:
 *     STATUS_SUCCESS if the command is queued
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - Generates an interrupt
 */
{
    UCHAR Buffer[2];
    int i;

    TRACE_(FLOPPY, "HwReadId called\n");

    PAGED_CODE();

    Buffer[0] = COMMAND_READ_ID | READ_ID_MFM;
    Buffer[1] = (Head << COMMAND_HEAD_NUMBER_SHIFT) | DriveInfo->UnitNumber;

    for(i = 0; i < 2; i++)
        if(Send_Byte(DriveInfo->ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwReadId: unable to send bytes to fifo\n");
            return STATUS_UNSUCCESSFUL;
        }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwFormatTrack(PCONTROLLER_INFO ControllerInfo,
              UCHAR Unit,
              UCHAR Head,
              UCHAR BytesPerSector,
              UCHAR SectorsPerTrack,
              UCHAR Gap3Length,
              UCHAR FillerPattern)
/*
 * FUNCTION: Format a track
 * ARGUMENTS:
 *     ControllerInfo: controller to target with the request
 *     Unit: drive to format on
 *     Head: head to format on
 *     BytesPerSector: constant from hardware.h to select density
 *     SectorsPerTrack: sectors per track
 *     Gap3Length: gap length to use during format
 *     FillerPattern: pattern to write into the data portion of sectors
 * RETURNS:
 *     STATUS_SUCCESS if the command is successfully queued
 *     STATUS_UNSUCCESSFUL otherwise
 */
{
    UCHAR Buffer[6];
    int i;

    TRACE_(FLOPPY, "HwFormatTrack called\n");

    PAGED_CODE();

    Buffer[0] = COMMAND_FORMAT_TRACK;
    Buffer[1] = (Head << COMMAND_HEAD_NUMBER_SHIFT) | Unit;
    Buffer[2] = BytesPerSector;
    Buffer[3] = SectorsPerTrack;
    Buffer[4] = Gap3Length;
    Buffer[5] = FillerPattern;

    for(i = 0; i < 6; i++)
        if(Send_Byte(ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwFormatTrack: unable to send bytes to floppy\n");
            return STATUS_UNSUCCESSFUL;
        }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwSeek(PDRIVE_INFO DriveInfo, UCHAR Cylinder)
/*
 * FUNCTION: Seek the heads to a particular cylinder
 * ARGUMENTS:
 *     DriveInfo: Drive to seek
 *     Cylinder: cylinder to move to
 * RETURNS:
 *     STATUS_SUCCESS if the command is successfully sent
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - Generates an interrupt
 */
{
    LARGE_INTEGER Delay;
    UCHAR Buffer[3];
    int i;

    TRACE_(FLOPPY, "HwSeek called for cyl 0x%x\n", Cylinder);

    PAGED_CODE();

    Buffer[0] = COMMAND_SEEK;
    Buffer[1] = DriveInfo->UnitNumber;
    Buffer[2] = Cylinder;

    for(i = 0; i < 3; i++)
        if(Send_Byte(DriveInfo->ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwSeek: failed to write fifo\n");
            return STATUS_UNSUCCESSFUL;
        }

    /* Wait for the head to settle */
    Delay.QuadPart = 10 * 1000;
    Delay.QuadPart *= -1;
    Delay.QuadPart *= DriveInfo->FloppyDeviceData.HeadSettleTime;

    KeDelayExecutionThread(KernelMode, FALSE, &Delay);

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwConfigure(PCONTROLLER_INFO ControllerInfo,
            BOOLEAN EIS,
            BOOLEAN EFIFO,
            BOOLEAN POLL,
            UCHAR FIFOTHR,
            UCHAR PRETRK)
/*
 * FUNCTION: Sends configuration to the drive
 * ARGUMENTS:
 *     ControllerInfo: controller to target with the request
 *     EIS: Enable implied seek
 *     EFIFO: Enable advanced fifo
 *     POLL: Enable polling
 *     FIFOTHR: fifo threshold
 *     PRETRK: precomp (see intel datasheet)
 * RETURNS:
 *     STATUS_SUCCESS if the command is successfully sent
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - No interrupt
 */
{
    UCHAR Buffer[4];
    int i;

    TRACE_(FLOPPY, "HwConfigure called\n");

    PAGED_CODE();

    Buffer[0] = COMMAND_CONFIGURE;
    Buffer[1] = 0;
    Buffer[2] = (EIS * CONFIGURE_EIS) + (EFIFO * CONFIGURE_EFIFO) + (POLL * CONFIGURE_POLL) + (FIFOTHR);
    Buffer[3] = PRETRK;

    for(i = 0; i < 4; i++)
        if(Send_Byte(ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwConfigure: failed to write the fifo\n");
            return STATUS_UNSUCCESSFUL;
        }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwGetVersion(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Gets the version of the controller
 * ARGUMENTS:
 *     ControllerInfo: controller to target with the request
 *     ConfigValue: Configuration value to send to the drive (see header)
 * RETURNS:
 *     Version number returned by the command, or
 *     0 on failure
 * NOTE:
 *     - This command doesn't interrupt, so we go right to reading after
 *       we issue the command
 */
{
    UCHAR Buffer;

    PAGED_CODE();

    if(Send_Byte(ControllerInfo, COMMAND_VERSION) != STATUS_SUCCESS)
    {
        WARN_(FLOPPY, "HwGetVersion: unable to write fifo\n");
        return STATUS_UNSUCCESSFUL;
    }

    if(Get_Byte(ControllerInfo, &Buffer) != STATUS_SUCCESS)
    {
        WARN_(FLOPPY, "HwGetVersion: unable to write fifo\n");
        return STATUS_UNSUCCESSFUL;
    }

    INFO_(FLOPPY, "HwGetVersion returning version 0x%x\n", Buffer);

    return Buffer;
}

NTSTATUS NTAPI
HwDiskChanged(PDRIVE_INFO DriveInfo, PBOOLEAN DiskChanged)
/*
 * FUNCTION: Detect whether the hardware has sensed a disk change
 * ARGUMENTS:
 *     DriveInfo: pointer to the drive that we are to check
 *     DiskChanged: boolean that is set with whether or not the controller thinks there has been a disk change
 * RETURNS:
 *     STATUS_SUCCESS if the drive is successfully queried
 * NOTES:
 *     - Does not interrupt.
 *     - Guessing a bit at the Model30 stuff
 */
{
    UCHAR Buffer;
    PCONTROLLER_INFO ControllerInfo = (PCONTROLLER_INFO) DriveInfo->ControllerInfo;

    Buffer = READ_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_INPUT_REGISTER);

    TRACE_(FLOPPY, "HwDiskChanged: read 0x%x from DIR\n", Buffer);

    if(ControllerInfo->Model30)
    {
        if(!(Buffer & DIR_DISKETTE_CHANGE))
        {
            INFO_(FLOPPY, "HdDiskChanged - Model30 - returning TRUE\n");
            *DiskChanged = TRUE;
        }
        else
        {
            INFO_(FLOPPY, "HdDiskChanged - Model30 - returning FALSE\n");
            *DiskChanged = FALSE;
        }
    }
    else
    {
        if(Buffer & DIR_DISKETTE_CHANGE)
        {
            INFO_(FLOPPY, "HdDiskChanged - PS2 - returning TRUE\n");
            *DiskChanged = TRUE;
        }
        else
        {
            INFO_(FLOPPY, "HdDiskChanged - PS2 - returning FALSE\n");
            *DiskChanged = FALSE;
        }
    }

    return STATUS_SUCCESS;
}

NTSTATUS NTAPI
HwSenseDriveStatusResult(PCONTROLLER_INFO ControllerInfo, PUCHAR Status)
/*
 * FUNCTION: Get the result of a sense drive status command
 * ARGUMENTS:
 *     ControllerInfo: controller to query
 *     Status: Status from the drive sense command
 * RETURNS:
 *     STATUS_SUCCESS if we can successfully read the status
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - Called post-interrupt; does not interrupt
 */
{
    PAGED_CODE();

    if(Get_Byte(ControllerInfo, Status) != STATUS_SUCCESS)
    {
        WARN_(FLOPPY, "HwSenseDriveStatus: unable to read fifo\n");
        return STATUS_UNSUCCESSFUL;
    }

    TRACE_(FLOPPY, "HwSenseDriveStatusResult: ST3: 0x%x\n", *Status);

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwReadIdResult(PCONTROLLER_INFO ControllerInfo,
               PUCHAR CurCylinder,
               PUCHAR CurHead)
/*
 * FUNCTION: Get the result of a read id command
 * ARGUMENTS:
 *     ControllerInfo: controller to query
 *     CurCylinder: Returns the cylinder that we're at
 *     CurHead: Returns the head that we're at
 * RETURNS:
 *     STATUS_SUCCESS if the read id was a success
 *     STATUS_UNSUCCESSFUL otherwise
 * NOTES:
 *     - This function tests the error conditions itself, and boils the
 *       whole thing down to a single SUCCESS or FAILURE result
 *     - Called post-interrupt; does not interrupt
 * TODO
 *     - perhaps handle more status
 */
{
    UCHAR Buffer[7] = {0,0,0,0,0,0,0};
    int i;

    PAGED_CODE();

    for(i = 0; i < 7; i++)
        if(Get_Byte(ControllerInfo, &Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "ReadIdResult(): can't read from the controller\n");
            return STATUS_UNSUCCESSFUL;
        }

    /* Validate  that it did what we told it to */
    INFO_(FLOPPY, "ReadId results: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", Buffer[0], Buffer[1], Buffer[2], Buffer[3],
          Buffer[4], Buffer[5], Buffer[6]);

    /* Last command successful? */
    if((Buffer[0] & SR0_LAST_COMMAND_STATUS) != SR0_LCS_SUCCESS)
    {
        WARN_(FLOPPY, "ReadId didn't return last command success\n");
        return STATUS_UNSUCCESSFUL;
    }

    /* ID mark found? */
    if(Buffer[1] & SR1_CANNOT_FIND_ID_ADDRESS)
    {
        WARN_(FLOPPY, "ReadId didn't find an address mark\n");
        return STATUS_UNSUCCESSFUL;
    }

    if(CurCylinder)
        *CurCylinder = Buffer[3];

    if(CurHead)
        *CurHead = Buffer[4];

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwSpecify(PCONTROLLER_INFO ControllerInfo,
          UCHAR HeadLoadTime,
          UCHAR HeadUnloadTime,
          UCHAR StepRateTime,
          BOOLEAN NonDma)
/*
 * FUNCTION: Set up timing and DMA mode for the controller
 * ARGUMENTS:
 *     ControllerInfo: Controller to set up
 *     HeadLoadTime: Head load time (see data sheet for details)
 *     HeadUnloadTime: Head unload time
 *     StepRateTime: Step rate time
 *     NonDma: TRUE to disable DMA mode
 * RETURNS:
 *     STATUS_SUCCESS if the controller is successfully programmed
 *     STATUS_UNSUCCESSFUL if not
 * NOTES:
 *     - Does not interrupt
 *
 * TODO: Figure out timings
 */
{
    UCHAR Buffer[3];
    int i;

    Buffer[0] = COMMAND_SPECIFY;
    /*
    Buffer[1] = (StepRateTime << 4) + HeadUnloadTime;
    Buffer[2] = (HeadLoadTime << 1) + (NonDma ? 1 : 0);
    */
    Buffer[1] = 0xdf;
    Buffer[2] = 0x2;

    //INFO_(FLOPPY, "HwSpecify: sending 0x%x 0x%x 0x%x to FIFO\n", Buffer[0], Buffer[1], Buffer[2]);
    WARN_(FLOPPY, "HWSPECIFY: FIXME - sending 0x3 0xd1 0x2 to FIFO\n");

    for(i = 0; i < 3; i++)
        if(Send_Byte(ControllerInfo, Buffer[i]) != STATUS_SUCCESS)
        {
            WARN_(FLOPPY, "HwSpecify: unable to write to controller\n");
            return STATUS_UNSUCCESSFUL;
        }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwReset(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Reset the controller
 * ARGUMENTS:
 *     ControllerInfo: controller to reset
 * RETURNS:
 *     STATUS_SUCCESS in all cases
 * NOTES:
 *     - Generates an interrupt that must be serviced four times (one per drive)
 */
{
    TRACE_(FLOPPY, "HwReset called\n");

    /* Write the reset bit in the DRSR */
    WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + DATA_RATE_SELECT_REGISTER, DRSR_SW_RESET);

    /* Check for the reset bit in the DOR and set it if necessary (see Intel doc) */
    if(!(READ_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_OUTPUT_REGISTER) & DOR_RESET))
    {
        HwDumpRegisters(ControllerInfo);
        INFO_(FLOPPY, "HwReset: Setting Enable bit\n");
        WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_OUTPUT_REGISTER, DOR_DMA_IO_INTERFACE_ENABLE|DOR_RESET);
        HwDumpRegisters(ControllerInfo);

        if(!(READ_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_OUTPUT_REGISTER) & DOR_RESET))
        {
            WARN_(FLOPPY, "HwReset: failed to set the DOR enable bit!\n");
            HwDumpRegisters(ControllerInfo);
            return STATUS_UNSUCCESSFUL;
        }
    }

    return STATUS_SUCCESS;
}


NTSTATUS NTAPI
HwPowerOff(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Power down a controller
 * ARGUMENTS:
 *     ControllerInfo: Controller to power down
 * RETURNS:
 *     STATUS_SUCCESS
 * NOTES:
 *     - Wake up with a hardware reset
 */
{
    TRACE_(FLOPPY, "HwPowerOff called on controller 0x%p\n", ControllerInfo);

    WRITE_PORT_UCHAR(ControllerInfo->BaseAddress + DATA_RATE_SELECT_REGISTER, DRSR_POWER_DOWN);

    return STATUS_SUCCESS;
}

VOID NTAPI
HwDumpRegisters(PCONTROLLER_INFO ControllerInfo)
/*
 * FUNCTION: Dump all readable registers from the floppy controller
 * ARGUMENTS:
 *     ControllerInfo: Controller to dump registers from
 */
{
    UNREFERENCED_PARAMETER(ControllerInfo);

    INFO_(FLOPPY, "STATUS:\n");
    INFO_(FLOPPY, "STATUS_REGISTER_A = 0x%x\n", READ_PORT_UCHAR(ControllerInfo->BaseAddress + STATUS_REGISTER_A));
    INFO_(FLOPPY, "STATUS_REGISTER_B = 0x%x\n", READ_PORT_UCHAR(ControllerInfo->BaseAddress + STATUS_REGISTER_B));
    INFO_(FLOPPY, "DIGITAL_OUTPUT_REGISTER = 0x%x\n", READ_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_OUTPUT_REGISTER));
    INFO_(FLOPPY, "MAIN_STATUS_REGISTER =0x%x\n", READ_PORT_UCHAR(ControllerInfo->BaseAddress + MAIN_STATUS_REGISTER));
    INFO_(FLOPPY, "DIGITAL_INPUT_REGISTER = 0x%x\n", READ_PORT_UCHAR(ControllerInfo->BaseAddress + DIGITAL_INPUT_REGISTER));
}