mirror of
https://github.com/reactos/reactos.git
synced 2024-07-06 12:45:16 +00:00
130 lines
4.4 KiB
C
130 lines
4.4 KiB
C
/*
|
|
* PROJECT: ReactOS Boot Loader
|
|
* LICENSE: BSD - See COPYING.ARM in the top level directory
|
|
* FILE: boot/armllb/hw/omap3-zoom2/hwlcd.c
|
|
* PURPOSE: LLB LCD Routines for OMAP3 ZOOM2
|
|
* PROGRAMMERS: ReactOS Portable Systems Group
|
|
*/
|
|
|
|
#include "precomp.h"
|
|
|
|
PUSHORT LlbHwVideoBuffer;
|
|
|
|
VOID
|
|
NTAPI
|
|
LlbHwOmap3LcdInitialize(VOID)
|
|
{
|
|
/*
|
|
* N.B. The following initialization sequence took about 12 months to figure
|
|
* out.
|
|
* This means if you are glancing at it and have no idea what on Earth
|
|
* could possibly be going on, this is *normal*.
|
|
* Just trust that this turns on the LCD.
|
|
* And be thankful all you ever have to worry about is Java and HTML.
|
|
*/
|
|
|
|
/* Turn on the functional and interface clocks in the entire PER domain */
|
|
WRITE_REGISTER_ULONG(0x48005000, 0x3ffff); /* Functional clocks */
|
|
WRITE_REGISTER_ULONG(0x48005010, 0x3ffff); /* Interface clocks */
|
|
|
|
/* Now that GPIO Module 3 is on, send a reset to the LCD panel on GPIO 96 */
|
|
WRITE_REGISTER_ULONG(0x49054034, 0); /* FIXME: Enable all as output */
|
|
WRITE_REGISTER_ULONG(0x49054094, 0xffffffff); /* FIXME: Output on all gpios */
|
|
|
|
/* Now turn on the functional and interface clocks in the CORE domain */
|
|
WRITE_REGISTER_ULONG(0x48004a00, 0x03fffe29); /* Functional clocks */
|
|
WRITE_REGISTER_ULONG(0x48004a10, 0x3ffffffb); /* Interface clocks */
|
|
|
|
/* The HS I2C interface is now on, configure it */
|
|
WRITE_REGISTER_USHORT(0x48070024, 0x0); /* Disable I2c */
|
|
WRITE_REGISTER_USHORT(0x48070030, 0x17); /* Configure clock divider */
|
|
WRITE_REGISTER_USHORT(0x48070034, 0xd); /* Configure clock scaler */
|
|
WRITE_REGISTER_USHORT(0x48070038, 0xf); /* Configure clock scaler */
|
|
WRITE_REGISTER_USHORT(0x48070020, 0x215); /* Configure clocks and idle */
|
|
WRITE_REGISTER_USHORT(0x4807000c, 0x636f); /* Select wakeup bits */
|
|
WRITE_REGISTER_USHORT(0x48070014, 0x4343); /* Disable DMA */
|
|
WRITE_REGISTER_USHORT(0x48070024, 0x8000); /* Enable I2C */
|
|
|
|
/*
|
|
* Set the VPLL2 to cover all device groups instead of just P3.
|
|
* This essentially enables the VRRTC to power up the LCD panel.
|
|
*/
|
|
LlbHwOmap3TwlWrite1(0x4B, 0x8E, 0xE0);
|
|
|
|
/* VPLL2 runs at 1.2V by default, so we need to reprogram to 1.8V for DVI */
|
|
LlbHwOmap3TwlWrite1(0x4B, 0x91, 0x05);
|
|
|
|
/* Set GPIO pin 7 on the TWL4030 as an output pin */
|
|
LlbHwOmap3TwlWrite1(0x49, 0x9B, 0x80);
|
|
|
|
/* Set GPIO pin 7 signal on the TWL4030 ON. This powers the LCD backlight */
|
|
LlbHwOmap3TwlWrite1(0x49, 0xA4, 0x80);
|
|
|
|
/* Now go on the McSPI interface and program it on for the channel */
|
|
WRITE_REGISTER_ULONG(0x48098010, 0x15);
|
|
WRITE_REGISTER_ULONG(0x48098020, 0x1);
|
|
WRITE_REGISTER_ULONG(0x48098028, 0x1);
|
|
WRITE_REGISTER_ULONG(0x4809802c, 0x112fdc);
|
|
|
|
/* Send the reset signal (R2 = 00h) to the NEC WVGA LCD Panel */
|
|
WRITE_REGISTER_ULONG(0x48098034, 0x1);
|
|
WRITE_REGISTER_ULONG(0x48098038, 0x20100);
|
|
WRITE_REGISTER_ULONG(0x48098034, 0x0);
|
|
|
|
/* Turn on the functional and interface clocks in the DSS domain */
|
|
WRITE_REGISTER_ULONG(0x48004e00, 0x5);
|
|
WRITE_REGISTER_ULONG(0x48004e10, 0x1);
|
|
|
|
/* Reset the Display Controller (DISPC) */
|
|
WRITE_REGISTER_ULONG(0x48050410, 0x00000005); // DISPC_SYSCONFIG
|
|
|
|
/* Set the frame buffer address */
|
|
WRITE_REGISTER_ULONG(0x48050480, 0x800A0000); // DISPC_GFX_BA0
|
|
|
|
/* Set resolution and RGB16 color mode */
|
|
WRITE_REGISTER_ULONG(0x4805048c, 0x01df031f); // DISPC_GFX_SIZE
|
|
WRITE_REGISTER_ULONG(0x480504a0, 0x0000000d); // DISPC_GFX_ATTRIBUTES
|
|
|
|
/* Set LCD timings (VSync and HSync), pixel clock, and LCD size */
|
|
WRITE_REGISTER_ULONG(0x4805046c, 0x00003000); // DISPC_POL_FREQ
|
|
WRITE_REGISTER_ULONG(0x48050470, 0x00010004); // DISPC_DIVISOR
|
|
WRITE_REGISTER_ULONG(0x48050464, 0x00300500); // DISPC_TIMING_H
|
|
WRITE_REGISTER_ULONG(0x48050468, 0x00400300); // DISPC_TIMING_V
|
|
WRITE_REGISTER_ULONG(0x4805047c, 0x01df031f); // DISPC_SIZE_LCD
|
|
|
|
/* Turn the LCD on */
|
|
WRITE_REGISTER_ULONG(0x48050440, 0x00018309); // DISPC_CONTROL
|
|
}
|
|
|
|
ULONG
|
|
NTAPI
|
|
LlbHwGetScreenWidth(VOID)
|
|
{
|
|
return 800;
|
|
}
|
|
|
|
ULONG
|
|
NTAPI
|
|
LlbHwGetScreenHeight(VOID)
|
|
{
|
|
return 480;
|
|
}
|
|
|
|
PVOID
|
|
NTAPI
|
|
LlbHwGetFrameBuffer(VOID)
|
|
{
|
|
return (PVOID)0x800A0000;
|
|
}
|
|
|
|
ULONG
|
|
NTAPI
|
|
LlbHwVideoCreateColor(IN ULONG Red,
|
|
IN ULONG Green,
|
|
IN ULONG Blue)
|
|
{
|
|
return (((Red >> 3) << 11)| ((Green >> 2) << 5)| ((Blue >> 3) << 0));
|
|
}
|
|
|
|
/* EOF */
|