Intravision/reactos
1
0
Fork 0
mirror of https://github.com/reactos/reactos.git synced 2024-11-05 22:26:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
reactos/drivers/storage/ide/uniata/id_probe.cpp

3376 lines
126 KiB
C++
Raw Blame History

/*++
Copyright (c) 2002-2016 Alexandr A. Telyatnikov (Alter)
Module Name:
id_probe.cpp
Abstract:
This module scans PCI and ISA buses for IDE controllers
and determines their Busmaster DMA capabilities
Author:
Alexander A. Telyatnikov (Alter)
Environment:
kernel mode only
Notes:
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Revision History:
Some parts of hardware-specific code were taken from FreeBSD 4.3-6.1 ATA driver by
Søren Schmidt, Copyright (c) 1998-2007
Some parts of device detection code were taken from from standard ATAPI.SYS from NT4 DDK by
Mike Glass (MGlass)
Chuck Park (ChuckP)
Device search/init algorithm is completly rewritten by
Alter, Copyright (c) 2002-2004
Fixes for Native/Compatible modes of onboard IDE controller by
Vitaliy Vorobyov, deathsoft@yandex.ru (c) 2004
Licence:
GPLv2
--*/
#include "stdafx.h"
PBUSMASTER_CONTROLLER_INFORMATION BMList = NULL;
ULONG BMListLen = 0;
ULONG IsaCount = 0;
ULONG MCACount = 0;
BOOLEAN FirstMasterOk = FALSE;
// This is our own resource check,
// ReactOS allows to allocate same I/O range for both PCI and ISA controllers
BOOLEAN AtdiskPrimaryClaimed = FALSE;
BOOLEAN AtdiskSecondaryClaimed = FALSE;
#ifndef UNIATA_CORE
UCHAR pciBuffer[256];
ULONG maxPciBus = 16;
PDRIVER_OBJECT SavedDriverObject = NULL;
// local routines
ULONG
NTAPI
UniataEnumBusMasterController__(
/* IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again*/
);
VOID
NTAPI
AtapiDoNothing(VOID)
{
return;
} // end AtapiDoNothing()
#endif //UNIATA_CORE
USHORT
NTAPI
UniataEnableIoPCI(
IN ULONG busNumber,
IN ULONG slotNumber,
IN OUT PPCI_COMMON_CONFIG pciData
)
{
ULONG i;
ULONG busDataRead;
USHORT CmdOrig;
// Enable Busmastering, IO-space and Mem-space
// Note: write to CONFIG *may* cause controller to interrupt (not handled yet)
// even if no bits are updated. Was observed on ICH7
KdPrint2((PRINT_PREFIX "Enabling Mem/Io spaces and busmastering...\n"));
KdPrint2((PRINT_PREFIX "Initial pciData.Command = %#x\n", pciData->Command));
for(i=0; i<3; i++) {
CmdOrig = pciData->Command;
switch(i) {
case 0:
KdPrint2((PRINT_PREFIX "PCI_ENABLE_IO_SPACE\n"));
pciData->Command |= PCI_ENABLE_IO_SPACE;
break;
case 1:
KdPrint2((PRINT_PREFIX "PCI_ENABLE_MEMORY_SPACE\n"));
pciData->Command |= PCI_ENABLE_MEMORY_SPACE;
break;
case 2:
KdPrint2((PRINT_PREFIX "PCI_ENABLE_BUS_MASTER\n"));
pciData->Command |= PCI_ENABLE_BUS_MASTER;
break;
}
if(CmdOrig == pciData->Command) {
continue;
}
HalSetBusDataByOffset( PCIConfiguration, busNumber, slotNumber,
&(pciData->Command),
offsetof(PCI_COMMON_CONFIG, Command),
sizeof(pciData->Command));
// reread config space
busDataRead = HalGetBusData(PCIConfiguration, busNumber, slotNumber,
pciData, PCI_COMMON_HDR_LENGTH);
if(busDataRead < PCI_COMMON_HDR_LENGTH) {
KdPrint2((PRINT_PREFIX "HalGetBusData() failed %#x\n", busDataRead));
break;
}
KdPrint2((PRINT_PREFIX "New pciData.Command = %#x\n", pciData->Command));
}
KdPrint2((PRINT_PREFIX "InterruptLine = %#x\n", pciData->u.type0.InterruptLine));
KdPrint2((PRINT_PREFIX "Final pciData.Command = %#x\n", pciData->Command));
return pciData->Command;
} // end UniataEnableIoPCI()
/*
Get PCI address by ConfigInfo and RID
*/
ULONG
NTAPI
AtapiGetIoRange(
IN PVOID HwDeviceExtension,
IN PPORT_CONFIGURATION_INFORMATION ConfigInfo,
IN PPCI_COMMON_CONFIG pciData,
IN ULONG SystemIoBusNumber,
IN ULONG rid, //range id
IN ULONG offset,
IN ULONG length
)
{
ULONGIO_PTR io_start = 0;
KdPrint2((PRINT_PREFIX " AtapiGetIoRange:\n"));
if(ConfigInfo->NumberOfAccessRanges <= rid)
return 0;
KdPrint2((PRINT_PREFIX " AtapiGetIoRange: rid %#x, start %#x, offs %#x, len %#x, mem %#x\n",
rid,
ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[rid].RangeStart),
offset,
length,
(*ConfigInfo->AccessRanges)[rid].RangeInMemory
));
if(!(*ConfigInfo->AccessRanges)[rid].RangeInMemory) {
io_start = (pciData->u.type0.BaseAddresses[rid] & ~0x07/*PCI_ADDRESS_IOMASK*/) + offset;
// if(pciData->u.type0.BaseAddresses[rid] != 0) ;)
if(io_start > offset) {
if(/*(WinVer_Id() <= WinVer_NT) &&*/ offset && rid == 4) {
// MS atapi.sys does so for BusMaster controllers
(*ConfigInfo->AccessRanges)[rid+1].RangeStart =
ScsiPortConvertUlongToPhysicalAddress(io_start);
(*ConfigInfo->AccessRanges)[rid+1].RangeLength = length;
} else {
(*ConfigInfo->AccessRanges)[rid].RangeStart =
ScsiPortConvertUlongToPhysicalAddress(io_start);
(*ConfigInfo->AccessRanges)[rid].RangeLength = length;
}
if((pciData->u.type0.BaseAddresses[rid] & PCI_ADDRESS_IO_SPACE)) {
(*ConfigInfo->AccessRanges)[rid].RangeInMemory = FALSE;
} else {
KdPrint2((PRINT_PREFIX " AtapiGetIoRange: adjust mem 0 -> 1\n"));
(*ConfigInfo->AccessRanges)[rid].RangeInMemory = TRUE;
}
} else {
io_start = 0;
}
}
if((*ConfigInfo->AccessRanges)[rid].RangeInMemory) {
if(offset) {
KdPrint2((PRINT_PREFIX " AtapiGetIoRange: can't map memory range with offset\n"));
return 0;
}
io_start =
// Get the system physical address for this IO range.
((ULONG_PTR)ScsiPortGetDeviceBase(HwDeviceExtension,
PCIBus /*ConfigInfo->AdapterInterfaceType*/,
SystemIoBusNumber /*ConfigInfo->SystemIoBusNumber*/,
ScsiPortConvertUlongToPhysicalAddress(
(ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[rid].RangeStart) &
~0x07/*PCI_ADDRESS_IOMASK*/) + offset
),
length,
(BOOLEAN)!(*ConfigInfo->AccessRanges)[rid].RangeInMemory)
);
KdPrint2((PRINT_PREFIX " AtapiGetIoRange: %#x\n", io_start));
// if(io_start > offset) {
return io_start;
// }
}
KdPrint2((PRINT_PREFIX " AtapiGetIoRange: (2) %#x\n", io_start));
return io_start;
} // end AtapiGetIoRange()
#ifndef UNIATA_CORE
/*
Do nothing, but build list of supported IDE controllers
It is a hack, ScsiPort architecture assumes, that DriverEntry
can support only KNOWN Vendor/Device combinations.
Thus, we build list here. Later we pretend that always knew
about found devices.
We shall initiate ISA device init, but callback will use
Hal routines directly in order to scan PCI bus.
*/
VOID
NTAPI
UniataEnumBusMasterController(
IN PVOID DriverObject,
PVOID Argument2
)
{
UniataEnumBusMasterController__();
} // end UniataEnumBusMasterController()
BOOLEAN
NTAPI
UniataCheckPCISubclass(
BOOLEAN known,
ULONG RaidFlags,
UCHAR SubClass
)
{
if(known) {
if((RaidFlags & UNIATA_RAID_CONTROLLER) &&
SkipRaids) {
KdPrint2((PRINT_PREFIX "Skip RAID\n"));
return FALSE;
}
return TRUE;
}
KdPrint2((PRINT_PREFIX "unknown\n"));
switch(SubClass) {
case PCI_DEV_SUBCLASS_RAID:
if(SkipRaids) {
KdPrint2((PRINT_PREFIX "Skip RAID (2)\n"));
return FALSE;
}
break;
case PCI_DEV_SUBCLASS_IDE:
case PCI_DEV_SUBCLASS_ATA:
break;
case PCI_DEV_SUBCLASS_SATA:
break;
default:
KdPrint2((PRINT_PREFIX "Subclass not supported\n"));
return FALSE;
}
return TRUE;
} // end UniataCheckPCISubclass()
static CONST ULONG StdIsaPorts[] = {IO_WD1, IO_WD1 + ATA_ALTOFFSET, IO_WD2, IO_WD2 + ATA_ALTOFFSET, 0, 0};
/*
Device initializaton callback
Builds PCI device list using Hal routines (not ScsiPort wrappers)
*/
ULONG
NTAPI
UniataEnumBusMasterController__(
)
{
// PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
// PVOID HwDeviceExtension;
PHW_DEVICE_EXTENSION deviceExtension = NULL;
PCHAR PciDevMap = NULL;
PCI_SLOT_NUMBER slotData;
PCI_COMMON_CONFIG pciData;
ULONG busNumber;
ULONG slotNumber;
ULONG funcNumber;
BOOLEAN no_buses = FALSE;
BOOLEAN no_ranges = FALSE;
BOOLEAN non_isa = TRUE;
ULONG busDataRead;
// BOOLEAN SimplexOnly;
UCHAR vendorString[5];
UCHAR deviceString[5];
PUCHAR vendorStrPtr;
PUCHAR deviceStrPtr;
UCHAR BaseClass; // (ro)
UCHAR SubClass; // (ro)
ULONG VendorID;
ULONG DeviceID;
ULONG dev_id;
USHORT SubVendorID;
USHORT SubSystemID;
ULONG i;
ULONG pass=0;
ULONG RaidFlags;
BOOLEAN found;
BOOLEAN known;
BOOLEAN NeedPciAltInit;
BOOLEAN NonZeroSubId = 0;
UCHAR IrqForCompat = 10;
vendorStrPtr = vendorString;
deviceStrPtr = deviceString;
slotData.u.AsULONG = 0;
KdPrint2((PRINT_PREFIX "UniataEnumBusMasterController__: maxPciBus=%d\n", maxPciBus));
if(!maxPciBus) {
return(SP_RETURN_NOT_FOUND);
}
/*HwDeviceExtension =*/
deviceExtension = (PHW_DEVICE_EXTENSION)ExAllocatePool(NonPagedPool, sizeof(HW_DEVICE_EXTENSION));
if(!deviceExtension) {
KdPrint2((PRINT_PREFIX "!deviceExtension\n"));
return(SP_RETURN_NOT_FOUND);
}
RtlZeroMemory(deviceExtension, sizeof(HW_DEVICE_EXTENSION));
PciDevMap = (PCHAR)ExAllocatePool(NonPagedPool, maxPciBus*PCI_MAX_DEVICES);
if(!PciDevMap) {
KdPrint2((PRINT_PREFIX "!PciDevMap\n"));
goto exit;
}
RtlZeroMemory(PciDevMap, maxPciBus*PCI_MAX_DEVICES);
for(pass=0; pass<3; pass++) {
KdPrint2((PRINT_PREFIX " pass %d\n", pass));
no_buses = FALSE;
for(busNumber=0 ;busNumber<maxPciBus && !no_buses; busNumber++) {
for(slotNumber=0; slotNumber<PCI_MAX_DEVICES && !no_buses; slotNumber++) {
NeedPciAltInit = FALSE;
for(funcNumber=0; funcNumber<PCI_MAX_FUNCTION && !no_buses; funcNumber++) {
if(pass) {
// use cached device presence map from the 1st pass
if(PciDevMap[busNumber*PCI_MAX_DEVICES + slotNumber] & (1 << funcNumber)) {
// ok
} else {
continue;
}
}
// KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x\n",busNumber,slotNumber,funcNumber));
slotData.u.bits.DeviceNumber = slotNumber;
slotData.u.bits.FunctionNumber = funcNumber;
busDataRead = HalGetBusData
//ScsiPortGetBusData
(
//HwDeviceExtension,
PCIConfiguration, busNumber, slotData.u.AsULONG,
&pciData, PCI_COMMON_HDR_LENGTH);
// no more buses
if(!busDataRead) {
no_buses = TRUE; // break all nested bus scan loops and continue with next pass
maxPciBus = busNumber;
break;
}
// indicate that system has PCI bus(es)
hasPCI = TRUE;
// no device in this slot
if(busDataRead == 2) {
NeedPciAltInit = TRUE;
continue;
}
if(busDataRead < (ULONG)PCI_COMMON_HDR_LENGTH) {
NeedPciAltInit = TRUE;
continue;
}
VendorID = pciData.VendorID;
DeviceID = pciData.DeviceID;
BaseClass = pciData.BaseClass;
SubClass = pciData.SubClass;
dev_id = VendorID | (DeviceID << 16);
SubVendorID = pciData.u.type0.SubVendorID;
SubSystemID = pciData.u.type0.SubSystemID;
if(SubVendorID && SubSystemID) {
NonZeroSubId = 1;
}
KdPrint2((PRINT_PREFIX "DevId = %8.8X Class = %4.4X/%4.4X, SubVen/Sys %4.4x/%4.4x\n", dev_id, BaseClass, SubClass, SubVendorID, SubSystemID));
// check for (g_opt_VirtualMachine == VM_AUTO) is performed inside each
// VM check for debug purposes
// Do not optimize :)
if((VendorID == 0x80ee && DeviceID == 0xcafe) ||
(VendorID == 0x80ee && DeviceID == 0xbeef)) {
KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x - VirtualBox Guest Service\n",busNumber,slotNumber,funcNumber));
if(g_opt_VirtualMachine == VM_AUTO) {
g_opt_VirtualMachine = VM_VBOX;
}
} else
if((VendorID == 0x15ad) ||
(SubVendorID == 0x15ad && SubSystemID == 0x1976)) {
KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x - VMWare\n",busNumber,slotNumber,funcNumber));
if(g_opt_VirtualMachine == VM_AUTO) {
g_opt_VirtualMachine = VM_VMWARE;
}
} else
if(SubVendorID == 0x1af4 && SubSystemID == 0x1100) {
KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x - QEmu\n",busNumber,slotNumber,funcNumber));
if(g_opt_VirtualMachine == VM_AUTO) {
g_opt_VirtualMachine = VM_QEMU;
}
} else
if(VendorID == 0x1234 && DeviceID == 0x1111) {
KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x - Bochs\n",busNumber,slotNumber,funcNumber));
if(g_opt_VirtualMachine == VM_AUTO) {
g_opt_VirtualMachine = VM_BOCHS;
}
/* } else
if(pass>0 && !NonZeroSubId &&
VendorID == 0x8086 &&
(DeviceID == 0x7010 ||
DeviceID == 0x1230)) {
KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x - Bochs PIIX emulation\n",busNumber,slotNumber,funcNumber));
if(g_opt_VirtualMachine == VM_AUTO) {
g_opt_VirtualMachine = VM_BOCHS;
}*/
}
if(BaseClass != PCI_DEV_CLASS_STORAGE) {
continue;
}
KdPrint2((PRINT_PREFIX "-- BusID: %#x:%#x:%#x\n",busNumber,slotNumber,funcNumber));
KdPrint2((PRINT_PREFIX "Storage Class\n"));
KdPrint2((PRINT_PREFIX "DevId = %8.8X Class = %4.4X/%4.4X, ProgIf %2.2X\n", dev_id, BaseClass, SubClass, pciData.ProgIf ));
// look for known chipsets
found = FALSE;
known = FALSE;
if(pciData.u.type0.InterruptPin == 14 ||
pciData.u.type0.InterruptPin == 15 ||
pciData.u.type0.InterruptLine == 14 ||
pciData.u.type0.InterruptLine == 15) {
KdPrint2((PRINT_PREFIX "(!) InterruptPin = %#x\n", pciData.u.type0.InterruptPin));
KdPrint2((PRINT_PREFIX "(!) InterruptLine = %#x\n", pciData.u.type0.InterruptLine));
}
if(deviceExtension) {
deviceExtension->slotNumber = slotData.u.AsULONG;
deviceExtension->SystemIoBusNumber = busNumber;
deviceExtension->DevID = dev_id;
deviceExtension->RevID = pciData.RevisionID;
deviceExtension->AdapterInterfaceType = PCIBus;
}
found = (BOOLEAN)AtapiRegCheckDevValue(deviceExtension, CHAN_NOT_SPECIFIED, DEVNUM_NOT_SPECIFIED, L"Include", 0);
if(!found) {
KdPrint2((PRINT_PREFIX "No force include, check exclude\n"));
found = !AtapiRegCheckDevValue(deviceExtension, CHAN_NOT_SPECIFIED, DEVNUM_NOT_SPECIFIED, L"Exclude", 0);
if(!found) {
KdPrint2((PRINT_PREFIX "Device excluded\n"));
continue;
}
}
//known = UniataChipDetect(HwDeviceExtension, NULL, -1, ConfigInfo, &SimplexOnly);
i = Ata_is_dev_listed((PBUSMASTER_CONTROLLER_INFORMATION_BASE)&BusMasterAdapters[0], VendorID, DeviceID, 0, NUM_BUSMASTER_ADAPTERS);
known = (i != BMLIST_TERMINATOR);
if(known) {
deviceExtension->FullDevName = BusMasterAdapters[i].FullDevName;
RaidFlags = BusMasterAdapters[i].RaidFlags;
} else {
deviceExtension->FullDevName = "Unknown Storage";
RaidFlags = 0;
}
found = UniataCheckPCISubclass(known, RaidFlags, SubClass);
if(!found) {
KdPrint2((PRINT_PREFIX "Subclass not supported\n"));
continue;
}
switch(dev_id) {
/* additional checks for some supported chipsets */
case 0xc6931080:
if (SubClass != PCI_DEV_SUBCLASS_IDE)
found = FALSE;
break;
/* unknown chipsets, try generic DMA if it seems possible */
default:
KdPrint2((PRINT_PREFIX "Default device\n"));
if(Ata_is_supported_dev(&pciData) ||
Ata_is_ahci_dev(&pciData))
found = TRUE;
break;
}
if(!found) {
continue;
}
KdPrint2((PRINT_PREFIX "found, pass %d\n", pass));
KdPrint2((PRINT_PREFIX "InterruptPin = %#x\n", pciData.u.type0.InterruptPin));
KdPrint2((PRINT_PREFIX "InterruptLine = %#x\n", pciData.u.type0.InterruptLine));
if(!pass && known) {
UniataEnableIoPCI(busNumber, slotData.u.AsULONG, &pciData);
}
// validate Mem/Io ranges
no_ranges = TRUE;
non_isa = TRUE;
for(i=0; i<PCI_TYPE0_ADDRESSES; i++) {
if(pciData.u.type0.BaseAddresses[i] & ~0x7) {
no_ranges = FALSE;
//break;
KdPrint2((PRINT_PREFIX "Range %d = %#x\n", i, pciData.u.type0.BaseAddresses[i]));
if(i<4) {
if(StdIsaPorts[i] == (pciData.u.type0.BaseAddresses[i] & ~0x7)) {
non_isa = FALSE;
}
}
}
}
if(no_ranges) {
KdPrint2((PRINT_PREFIX "No PCI Mem/Io ranges found on device, skip it\n"));
continue;
}
if(!non_isa) {
KdPrint2((PRINT_PREFIX "standard ISA ranges on PCI, special case ?\n"));
}
if(pass) {
// fill list of detected devices
// it'll be used for further init
KdPrint2((PRINT_PREFIX "found suitable device\n"));
PBUSMASTER_CONTROLLER_INFORMATION newBMListPtr = BMList+BMListLen;
if(pass == 1) {
if(!IsMasterDev(&pciData)) {
continue;
}
if(AtapiRegCheckDevValue(deviceExtension, CHAN_NOT_SPECIFIED, DEVNUM_NOT_SPECIFIED, L"NativePCIMode", 0)) {
KdPrint2((PRINT_PREFIX "try switch to native mode\n"));
IrqForCompat = (UCHAR)AtapiRegCheckDevValue(deviceExtension, CHAN_NOT_SPECIFIED, DEVNUM_NOT_SPECIFIED, L"NativePCIModeIRQ", 0xff);
KdPrint2((PRINT_PREFIX "IrqForCompat = %#x\n", IrqForCompat));
if((IrqForCompat & 0xffffff00) /*||
(IrqForCompat & 0xff) > 31*/ ||
(IrqForCompat == 0xff)) {
IrqForCompat = 0x0b;
KdPrint2((PRINT_PREFIX "default to IRQ 11\n"));
}
//ChangePciConfig1(0x09, a | PCI_IDE_PROGIF_NATIVE_ALL); // ProgIf
pciData.ProgIf |= PCI_IDE_PROGIF_NATIVE_ALL;
HalSetBusDataByOffset( PCIConfiguration, busNumber, slotData.u.AsULONG,
&(pciData.ProgIf),
offsetof(PCI_COMMON_CONFIG, ProgIf),
sizeof(pciData.ProgIf));
// reread config space
busDataRead = HalGetBusData(PCIConfiguration, busNumber, slotData.u.AsULONG,
&pciData, PCI_COMMON_HDR_LENGTH);
// check if the device have switched to Native Mode
if(IsMasterDev(&pciData)) {
KdPrint2((PRINT_PREFIX "Can't switch to native mode\n"));
} else {
KdPrint2((PRINT_PREFIX "switched to native mode\n"));
KdPrint2((PRINT_PREFIX "InterruptPin = %#x\n", pciData.u.type0.InterruptPin));
KdPrint2((PRINT_PREFIX "InterruptLine = %#x\n", pciData.u.type0.InterruptLine));
// check if IRQ is assigned to device
if(!(pciData.u.type0.InterruptLine) ||
(pciData.u.type0.InterruptLine == 0xff)) {
KdPrint2((PRINT_PREFIX "assign interrupt for device\n"));
pciData.u.type0.InterruptLine = IrqForCompat;
HalSetBusDataByOffset( PCIConfiguration, busNumber, slotData.u.AsULONG,
&(pciData.u.type0.InterruptLine),
offsetof(PCI_COMMON_CONFIG, u.type0.InterruptLine),
sizeof(pciData.u.type0.InterruptLine));
} else {
KdPrint2((PRINT_PREFIX "Auto-assigned interrupt line %#x\n",
pciData.u.type0.InterruptLine));
IrqForCompat = pciData.u.type0.InterruptLine;
}
KdPrint2((PRINT_PREFIX "reread config space\n"));
// reread config space
busDataRead = HalGetBusData(PCIConfiguration, busNumber, slotData.u.AsULONG,
&pciData, PCI_COMMON_HDR_LENGTH);
KdPrint2((PRINT_PREFIX "busDataRead = %#x\n", busDataRead));
KdPrint2((PRINT_PREFIX "reread InterruptLine = %#x\n", pciData.u.type0.InterruptLine));
// check if we have successfully assigned IRQ to device
if((pciData.u.type0.InterruptLine != IrqForCompat) ||
(pciData.u.type0.InterruptLine == 0xff) ||
!pciData.u.type0.InterruptLine) {
KdPrint2((PRINT_PREFIX "can't assign interrupt for device, revert to compat mode\n"));
pciData.u.type0.InterruptLine = 0xff;
KdPrint2((PRINT_PREFIX "set IntrLine to 0xff\n"));
HalSetBusDataByOffset( PCIConfiguration, busNumber, slotData.u.AsULONG,
&(pciData.u.type0.InterruptLine),
offsetof(PCI_COMMON_CONFIG, u.type0.InterruptLine),
sizeof(pciData.u.type0.InterruptLine));
KdPrint2((PRINT_PREFIX "clear PCI_IDE_PROGIF_NATIVE_ALL\n"));
pciData.ProgIf &= ~PCI_IDE_PROGIF_NATIVE_ALL;
HalSetBusDataByOffset( PCIConfiguration, busNumber, slotData.u.AsULONG,
&(pciData.ProgIf),
offsetof(PCI_COMMON_CONFIG, ProgIf),
sizeof(pciData.ProgIf));
// reread config space
KdPrint2((PRINT_PREFIX "reread config space on revert\n"));
busDataRead = HalGetBusData(PCIConfiguration, busNumber, slotData.u.AsULONG,
&pciData, PCI_COMMON_HDR_LENGTH);
} else {
KdPrint2((PRINT_PREFIX "Assigned interrupt %#x for device\n", IrqForCompat));
KdPrint2((PRINT_PREFIX "continue detection on next round\n"));
continue;
}
}
}
} else
if(pass == 2) {
if(IsMasterDev(&pciData)) {
continue;
}
}
/* if(known) {
RtlCopyMemory(newBMListPtr, (PVOID)&(BusMasterAdapters[i]), sizeof(BUSMASTER_CONTROLLER_INFORMATION));
} else {*/
sprintf((PCHAR)vendorStrPtr, "%4.4lx", VendorID);
sprintf((PCHAR)deviceStrPtr, "%4.4lx", DeviceID);
RtlCopyMemory(&(newBMListPtr->VendorIdStr), (PCHAR)vendorStrPtr, 4);
RtlCopyMemory(&(newBMListPtr->DeviceIdStr), (PCHAR)deviceStrPtr, 4);
newBMListPtr->nVendorId = VendorID;
newBMListPtr->VendorId = (PCHAR)&(newBMListPtr->VendorIdStr);
newBMListPtr->VendorIdLength = 4;
newBMListPtr->nDeviceId = DeviceID;
newBMListPtr->DeviceId = (PCHAR)&(newBMListPtr->DeviceIdStr);
newBMListPtr->DeviceIdLength = 4;
newBMListPtr->RaidFlags = RaidFlags;
// }
newBMListPtr->slotNumber = slotData.u.AsULONG;
newBMListPtr->MasterDev = IsMasterDev(&pciData) ? 1 : 0;
newBMListPtr->busNumber = busNumber;
newBMListPtr->NeedAltInit = NeedPciAltInit;
newBMListPtr->Known = known;
if(!non_isa) {
KdPrint2((PRINT_PREFIX "* ISA ranges on PCI, special case !\n"));
// Do not fail init after unseccessfull call of UniataClaimLegacyPCIIDE()
// some SMP HALs fails to reallocate IO range
newBMListPtr->ChanInitOk |= 0x40;
}
KdPrint2((PRINT_PREFIX "Add to BMList, AltInit %d\n", NeedPciAltInit));
} else {
KdPrint2((PRINT_PREFIX "count: BMListLen++\n"));
PciDevMap[busNumber*PCI_MAX_DEVICES + slotNumber] |= (1 << funcNumber);
}
BMListLen++;
} // Function
} // Slot
if(!hasPCI) {
break;
}
}
if(!pass) {
if(!BMListLen)
break;
BMList = (PBUSMASTER_CONTROLLER_INFORMATION)ExAllocatePool(NonPagedPool,
(BMListLen+1)*sizeof(BUSMASTER_CONTROLLER_INFORMATION));
if(!BMList) {
BMListLen=0;
break;
}
RtlZeroMemory(BMList, (BMListLen+1)*sizeof(BUSMASTER_CONTROLLER_INFORMATION));
no_buses = FALSE;
BMListLen=0;
}
}
exit:
KdPrint2((PRINT_PREFIX " BMListLen=%x\n", BMListLen));
if(deviceExtension) {
ExFreePool(deviceExtension);
}
if(PciDevMap) {
ExFreePool(PciDevMap);
}
return(SP_RETURN_NOT_FOUND);
} // end UniataEnumBusMasterController__()
/*
Wrapper for read PCI config space
*/
ULONG
NTAPI
ScsiPortGetBusDataByOffset(
IN PVOID HwDeviceExtension,
IN BUS_DATA_TYPE BusDataType,
IN ULONG BusNumber,
IN ULONG SlotNumber,
IN PVOID Buffer,
IN ULONG Offset,
IN ULONG Length
)
{
UCHAR tmp[256];
ULONG busDataRead;
if(Offset+Length > 256)
return 0;
busDataRead = HalGetBusData(
//ScsiPortGetBusData(HwDeviceExtension,
BusDataType,
BusNumber,
SlotNumber,
&tmp,
Offset+Length);
if(busDataRead < Offset+Length) {
if(busDataRead < Offset)
return 0;
return (Offset+Length-busDataRead);
}
RtlCopyMemory(Buffer, tmp+Offset, Length);
return Length;
} // end ScsiPortGetBusDataByOffset()
/*
Looks for devices from list on specified bus(es)/slot(s)
returnts its index in list.
If no matching record found, -1 is returned
*/
ULONG
NTAPI
AtapiFindListedDev(
IN PBUSMASTER_CONTROLLER_INFORMATION_BASE BusMasterAdapters,
IN ULONG lim,
IN PVOID HwDeviceExtension,
IN ULONG BusNumber,
IN ULONG SlotNumber,
OUT PCI_SLOT_NUMBER* _slotData // optional
)
{
PCI_SLOT_NUMBER slotData;
PCI_COMMON_CONFIG pciData;
ULONG busDataRead;
ULONG busNumber;
ULONG slotNumber;
ULONG funcNumber;
ULONG busNumber2;
ULONG slotNumber2;
ULONG i;
KdPrint2((PRINT_PREFIX "AtapiFindListedDev: lim=%x, Bus=%x, Slot=%x\n", lim, BusNumber, SlotNumber));
// set start/end bus
if(BusNumber == PCIBUSNUM_NOT_SPECIFIED) {
busNumber = 0;
busNumber2 = maxPciBus;
} else {
busNumber = BusNumber;
busNumber2 = BusNumber+1;
}
// set start/end slot
if(SlotNumber == PCISLOTNUM_NOT_SPECIFIED) {
slotNumber = 0;
slotNumber2 = PCI_MAX_DEVICES;
} else {
slotNumber = SlotNumber;
slotNumber2 = SlotNumber+1;
}
slotData.u.AsULONG = 0;
KdPrint2((PRINT_PREFIX " scanning range Bus %x-%x, Slot %x-%x\n", busNumber, busNumber2-1, slotNumber, slotNumber2-1));
for( ; busNumber < busNumber2 ; busNumber++ ) {
for( ; slotNumber < slotNumber2 ; slotNumber++) {
for(funcNumber=0; funcNumber < PCI_MAX_FUNCTION ; funcNumber++) {
slotData.u.bits.DeviceNumber = slotNumber;
slotData.u.bits.FunctionNumber = funcNumber;
busDataRead = HalGetBusData(
//ScsiPortGetBusData(HwDeviceExtension,
PCIConfiguration, busNumber, slotData.u.AsULONG,
&pciData, PCI_COMMON_HDR_LENGTH);
// no more buses (this should not happen)
if(!busDataRead) {
continue;
}
// no device in this slot
if(busDataRead == 2)
continue;
if(busDataRead < (ULONG)PCI_COMMON_HDR_LENGTH)
continue;
/*
KdPrint2((PRINT_PREFIX "AtapiFindListedDev: b:s:f(%x:%x:%x) %4.4x/%4.4x/%2.2x\n",
busNumber, slotNumber, funcNumber,
pciData.VendorID, pciData.DeviceID, pciData.RevisionID));
*/
i = Ata_is_dev_listed(BusMasterAdapters, pciData.VendorID, pciData.DeviceID, pciData.RevisionID, lim);
if(i != BMLIST_TERMINATOR) {
if(_slotData)
*_slotData = slotData;
KdPrint2((PRINT_PREFIX "AtapiFindListedDev: found\n"));
KdPrint2((PRINT_PREFIX "AtapiFindListedDev: b:s:f(%x:%x:%x) %4.4x/%4.4x/%2.2x\n",
busNumber, slotNumber, funcNumber,
pciData.VendorID, pciData.DeviceID, pciData.RevisionID));
return i;
}
}}}
return -1;
} // end AtapiFindListedDev()
/*
Looks for device with specified Device/Vendor and Revision
on specified Bus/Slot
*/
ULONG
NTAPI
AtapiFindDev(
IN PVOID HwDeviceExtension,
IN BUS_DATA_TYPE BusDataType,
IN ULONG BusNumber,
IN ULONG SlotNumber,
IN ULONG dev_id,
IN ULONG RevID
)
{
PCI_COMMON_CONFIG pciData;
ULONG funcNumber;
ULONG busDataRead;
ULONG VendorID;
ULONG DeviceID;
PCI_SLOT_NUMBER slotData;
slotData.u.AsULONG = SlotNumber;
// walk through all Function Numbers
for(funcNumber = 0; funcNumber < PCI_MAX_FUNCTION; funcNumber++) {
slotData.u.bits.FunctionNumber = funcNumber;
if(slotData.u.AsULONG == SlotNumber)
continue;
busDataRead = HalGetBusData(
//busDataRead = ScsiPortGetBusData(HwDeviceExtension,
PCIConfiguration,
BusNumber,
slotData.u.AsULONG,
&pciData,
PCI_COMMON_HDR_LENGTH);
if (busDataRead < (ULONG)PCI_COMMON_HDR_LENGTH) {
continue;
}
VendorID = pciData.VendorID;
DeviceID = pciData.DeviceID;
if(dev_id != (VendorID | (DeviceID << 16)) )
continue;
if(RevID >= pciData.RevisionID)
return 1;
}
return 0;
} // end AtapiFindDev()
#endif //UNIATA_CORE
ULONG
NTAPI
UniataFindCompatBusMasterController1(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
)
{
return UniataFindBusMasterController(
HwDeviceExtension,
(PVOID)0x00000000,
BusInformation,
ArgumentString,
ConfigInfo,
Again
);
} // end UniataFindCompatBusMasterController1()
ULONG
NTAPI
UniataFindCompatBusMasterController2(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
)
{
return UniataFindBusMasterController(
HwDeviceExtension,
(PVOID)0x80000000,
BusInformation,
ArgumentString,
ConfigInfo,
Again
);
} // end UniataFindCompatBusMasterController2()
/*++
Routine Description:
This function is called by the OS-specific port driver after
the necessary storage has been allocated, to gather information
about the adapter's configuration.
Arguments:
HwDeviceExtension - HBA miniport driver's adapter data storage
Context - Address of adapter count
BusInformation -
ArgumentString - Used to determine whether driver is client of ntldr or crash dump utility.
ConfigInfo - Configuration information structure describing HBA
Again - Indicates search for adapters to continue
Return Value:
ULONG
--*/
ULONG
NTAPI
UniataFindBusMasterController(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PHW_CHANNEL chan = NULL;
#ifndef UNIATA_CORE
// this buffer must be global for UNIATA_CORE build
PCI_COMMON_CONFIG pciData;
#endif //UNIATA_CORE
ULONG slotNumber;
ULONG busDataRead;
ULONG SystemIoBusNumber;
/*
UCHAR vendorString[5];
UCHAR deviceString[5];
PUCHAR vendorStrPtr;
PUCHAR deviceStrPtr;
*/
UCHAR BaseClass;
UCHAR SubClass;
ULONG VendorID;
ULONG DeviceID;
ULONG RevID;
ULONG dev_id;
PCI_SLOT_NUMBER slotData;
ULONG i;
ULONG channel;
ULONG c = 0;
PUCHAR ioSpace;
UCHAR statusByte;
ULONG bm_offset;
// UCHAR tmp8;
// ULONG irq;
BOOLEAN found = FALSE;
BOOLEAN MasterDev;
BOOLEAN simplexOnly = FALSE;
#ifndef UNIATA_CORE
#ifdef UNIATA_INIT_ON_PROBE
BOOLEAN skip_find_dev = FALSE;
#endif
#endif
BOOLEAN AltInit = FALSE;
SCSI_PHYSICAL_ADDRESS IoBasePort1;
SCSI_PHYSICAL_ADDRESS IoBasePort2;
PIDE_BUSMASTER_REGISTERS BaseIoAddressBM_0 = NULL;
PIDE_REGISTERS_1 BaseIoAddress1[IDE_MAX_CHAN];
PIDE_REGISTERS_2 BaseIoAddress2[IDE_MAX_CHAN];
RtlZeroMemory(&BaseIoAddress1, sizeof(BaseIoAddress1));
RtlZeroMemory(&BaseIoAddress2, sizeof(BaseIoAddress2));
NTSTATUS status;
PPORT_CONFIGURATION_INFORMATION_COMMON _ConfigInfo =
(PPORT_CONFIGURATION_INFORMATION_COMMON)ConfigInfo;
if(!WinVer_WDM_Model) {
*Again = FALSE;
} else {
*Again = TRUE;
}
KdPrint2((PRINT_PREFIX "UniataFindBusMasterController: Context=%x, BMListLen=%d\n", Context, BMListLen));
KdPrint2((PRINT_PREFIX "ConfigInfo->Length %x\n", ConfigInfo->Length));
if(ForceSimplex) {
KdPrint2((PRINT_PREFIX "ForceSimplex (1)\n"));
simplexOnly = TRUE;
}
if(ConfigInfo->AdapterInterfaceType == Isa) {
KdPrint2((PRINT_PREFIX "AdapterInterfaceType: Isa\n"));
}
if(InDriverEntry) {
i = (ULONG)Context;
if(i & 0x80000000) {
AltInit = TRUE;
}
i &= ~0x80000000;
channel = BMList[i].channel;
} else {
channel = 0;
for(i=0; i<BMListLen; i++) {
if(BMList[i].slotNumber == ConfigInfo->SlotNumber &&
BMList[i].busNumber == ConfigInfo->SystemIoBusNumber) {
break;
}
}
if(i >= BMListLen) {
KdPrint2((PRINT_PREFIX "unexpected device arrival\n"));
i = (ULONG)Context;
if(FirstMasterOk) {
channel = 1;
}
i &= ~0x80000000;
if(i >= BMListLen) {
KdPrint2((PRINT_PREFIX " => SP_RETURN_NOT_FOUND\n"));
goto exit_notfound;
}
}
BMList[i].channel = (UCHAR)channel;
}
bm_offset = channel ? ATA_BM_OFFSET1 : 0;
KdPrint2((PRINT_PREFIX "bm_offset %x, channel %x \n", bm_offset, channel));
if (!deviceExtension) {
KdPrint2((PRINT_PREFIX "!deviceExtension => SP_RETURN_ERROR\n"));
return SP_RETURN_ERROR;
}
RtlZeroMemory(deviceExtension, sizeof(HW_DEVICE_EXTENSION));
/*
vendorStrPtr = vendorString;
deviceStrPtr = deviceString;
*/
slotNumber = BMList[i].slotNumber;
SystemIoBusNumber = BMList[i].busNumber;
KdPrint2((PRINT_PREFIX "AdapterInterfaceType=%#x\n",ConfigInfo->AdapterInterfaceType));
KdPrint2((PRINT_PREFIX "IoBusNumber=%#x\n",ConfigInfo->SystemIoBusNumber));
KdPrint2((PRINT_PREFIX "slotNumber=%#x\n",slotNumber));
// this buffer must be global and already filled for UNIATA_CORE build
busDataRead = HalGetBusData(
//busDataRead = ScsiPortGetBusData(HwDeviceExtension,
PCIConfiguration,
SystemIoBusNumber,
slotNumber,
&pciData,
PCI_COMMON_HDR_LENGTH);
#ifndef UNIATA_CORE
if (busDataRead < (ULONG)PCI_COMMON_HDR_LENGTH) {
KdPrint2((PRINT_PREFIX "busDataRead < PCI_COMMON_HDR_LENGTH => SP_RETURN_ERROR\n"));
goto exit_error;
}
KdPrint2((PRINT_PREFIX "busDataRead\n"));
if (pciData.VendorID == PCI_INVALID_VENDORID) {
KdPrint2((PRINT_PREFIX "PCI_INVALID_VENDORID\n"));
goto exit_error;
}
#endif //UNIATA_CORE
VendorID = pciData.VendorID;
DeviceID = pciData.DeviceID;
BaseClass = pciData.BaseClass;
SubClass = pciData.SubClass;
RevID = pciData.RevisionID;
dev_id = VendorID | (DeviceID << 16);
slotData.u.AsULONG = slotNumber;
KdPrint2((PRINT_PREFIX "DevId = %8.8X Class = %4.4X/%4.4X\n", dev_id, BaseClass, SubClass ));
deviceExtension->slotNumber = slotNumber;
deviceExtension->SystemIoBusNumber = SystemIoBusNumber;
deviceExtension->DevID = dev_id;
deviceExtension->RevID = RevID;
deviceExtension->NumberChannels = IDE_DEFAULT_MAX_CHAN; // default
deviceExtension->NumberLuns = IDE_MAX_LUN_PER_CHAN; // default
deviceExtension->DevIndex = i;
_snprintf(deviceExtension->Signature, sizeof(deviceExtension->Signature),
"UATA%8.8x/%1.1x@%8.8x", dev_id, channel, slotNumber);
if(BaseClass != PCI_DEV_CLASS_STORAGE) {
KdPrint2((PRINT_PREFIX "BaseClass != PCI_DEV_CLASS_STORAGE => SP_RETURN_NOT_FOUND\n"));
goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "Storage Class\n"));
// look for known chipsets
if(VendorID != BMList[i].nVendorId ||
DeviceID != BMList[i].nDeviceId) {
KdPrint2((PRINT_PREFIX "device not suitable\n"));
goto exit_notfound;
}
found = UniataCheckPCISubclass(BMList[i].Known, BMList[i].RaidFlags, SubClass);
if(!found) {
KdPrint2((PRINT_PREFIX "Subclass not supported\n"));
goto exit_notfound;
}
ConfigInfo->AlignmentMask = 0x00000003;
MasterDev = IsMasterDev(&pciData);
if(MasterDev) {
KdPrint2((PRINT_PREFIX "MasterDev (1)\n"));
deviceExtension->MasterDev = TRUE;
KdPrint2((PRINT_PREFIX "Check exclude\n"));
if(AtapiRegCheckDevValue(deviceExtension, channel, DEVNUM_NOT_SPECIFIED, L"Exclude", 0)) {
KdPrint2((PRINT_PREFIX "Device excluded\n"));
goto exit_notfound;
}
}
status = UniataChipDetect(HwDeviceExtension, &pciData, i, ConfigInfo, &simplexOnly);
switch(status) {
case STATUS_SUCCESS:
found = TRUE;
break;
case STATUS_NOT_FOUND:
found = FALSE;
break;
default:
KdPrint2((PRINT_PREFIX "FAILED => SP_RETURN_ERROR\n"));
goto exit_error;
}
KdPrint2((PRINT_PREFIX "ForceSimplex = %d\n", simplexOnly));
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (0)", deviceExtension->HwFlags));
switch(dev_id) {
/* additional checks for some supported chipsets */
case 0xc6931080:
if (SubClass != PCI_DEV_SUBCLASS_IDE) {
KdPrint2((PRINT_PREFIX "0xc6931080, SubClass != PCI_DEV_SUBCLASS_IDE => found = FALSE\n"));
found = FALSE;
} else {
found = FALSE;
}
break;
/* unknown chipsets, try generic DMA if it seems possible */
default:
if (found)
break;
KdPrint2((PRINT_PREFIX "Default device\n"));
if(Ata_is_supported_dev(&pciData)) {
KdPrint2((PRINT_PREFIX "Ata_is_supported_dev\n"));
found = TRUE;
} else
if(deviceExtension->HwFlags & UNIATA_AHCI) {
KdPrint2((PRINT_PREFIX "AHCI candidate\n"));
found = TRUE;
} else {
KdPrint2((PRINT_PREFIX "!Ata_is_supported_dev => found = FALSE\n"));
found = FALSE;
}
deviceExtension->UnknownDev = TRUE;
break;
}
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (1)", deviceExtension->HwFlags));
if(!found) {
KdPrint2((PRINT_PREFIX "!found => SP_RETURN_NOT_FOUND\n"));
goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (2)", deviceExtension->HwFlags));
KdPrint2((PRINT_PREFIX "found suitable device\n"));
/***********************************************************/
/***********************************************************/
/***********************************************************/
deviceExtension->UseDpc = TRUE;
#ifndef UNIATA_CORE
if (g_Dump) {
deviceExtension->DriverMustPoll = TRUE;
deviceExtension->UseDpc = FALSE;
deviceExtension->simplexOnly = TRUE;
deviceExtension->HwFlags |= UNIATA_NO_DPC;
}
#endif //UNIATA_CORE
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (3)", deviceExtension->HwFlags));
if(deviceExtension->HwFlags & UNIATA_NO_DPC) {
/* CMD 649, ROSB SWK33, ICH4 */
KdPrint2((PRINT_PREFIX "UniataFindBusMasterController: UNIATA_NO_DPC (0)\n"));
deviceExtension->UseDpc = FALSE;
}
if(MasterDev) {
if((WinVer_Id() <= WinVer_NT) && AltInit && FirstMasterOk) {
// this is the 2nd attempt to init this controller by OUR driver
KdPrint2((PRINT_PREFIX "Skip primary/secondary claiming checks\n"));
} else {
if((channel==0) && ConfigInfo->AtdiskPrimaryClaimed) {
KdPrint2((PRINT_PREFIX "Error: Primary channel already claimed by another driver\n"));
goto exit_notfound;
}
if((channel==1) && ConfigInfo->AtdiskSecondaryClaimed) {
KdPrint2((PRINT_PREFIX "Error: Secondary channel already claimed by another driver\n"));
goto exit_notfound;
}
}
}
if(deviceExtension->HwFlags & UNIATA_AHCI) {
KdPrint2((PRINT_PREFIX " AHCI registers layout\n"));
} else
if(deviceExtension->AltRegMap) {
KdPrint2((PRINT_PREFIX " Non-standard registers layout\n"));
if(deviceExtension->HwFlags & UNIATA_SATA) {
KdPrint2((PRINT_PREFIX "UNIATA_SATA -> IsBusMaster == TRUE\n"));
if(!deviceExtension->BusMaster) {
deviceExtension->BusMaster = DMA_MODE_BM;
}
}
} else {
deviceExtension->BusMaster = DMA_MODE_NONE;
if(WinVer_WDM_Model && !deviceExtension->UnknownDev) {
UniataEnableIoPCI(ConfigInfo->SystemIoBusNumber, slotData.u.AsULONG, &pciData);
}
// validate Mem/Io ranges
//no_ranges = TRUE;
{
ULONG j;
for(j=0; j<PCI_TYPE0_ADDRESSES; j++) {
if(pciData.u.type0.BaseAddresses[j] & ~0x7) {
//no_ranges = FALSE;
//break;
KdPrint2((PRINT_PREFIX "Range %d = %#x\n", j, pciData.u.type0.BaseAddresses[j]));
}
}
}
if(IsBusMaster(&pciData)) {
KdPrint2((PRINT_PREFIX "IsBusMaster == TRUE\n"));
BaseIoAddressBM_0 = (PIDE_BUSMASTER_REGISTERS)
(AtapiGetIoRange(HwDeviceExtension, ConfigInfo, &pciData, SystemIoBusNumber,
4, bm_offset, MasterDev ? 0x08 : 0x10/*ATA_BMIOSIZE*/)/* - bm_offset*/); //range id
if(BaseIoAddressBM_0) {
UniataInitMapBM(deviceExtension,
BaseIoAddressBM_0,
(*ConfigInfo->AccessRanges)[4].RangeInMemory ? TRUE : FALSE);
deviceExtension->BusMaster = DMA_MODE_BM;
deviceExtension->BaseIoAddressBM_0.Addr = (ULONGIO_PTR)BaseIoAddressBM_0;
if((*ConfigInfo->AccessRanges)[4].RangeInMemory) {
deviceExtension->BaseIoAddressBM_0.MemIo = TRUE;
}
}
KdPrint2((PRINT_PREFIX " BusMasterAddress (base): %#x\n", BaseIoAddressBM_0));
}
if(!deviceExtension->BusMaster) {
KdPrint2((PRINT_PREFIX " !BusMasterAddress -> PIO4\n"));
deviceExtension->MaxTransferMode = ATA_PIO4;
}
if(deviceExtension->BusMaster && !MasterDev) {
KdPrint2((PRINT_PREFIX "IsBusMaster == TRUE && !MasterDev\n"));
statusByte = AtapiReadPort1(&(deviceExtension->chan[0]), IDX_BM_Status);
KdPrint2((PRINT_PREFIX " BM statusByte = %x\n", statusByte));
if(statusByte == IDE_STATUS_WRONG) {
KdPrint2((PRINT_PREFIX " invalid port ?\n"));
deviceExtension->BusMaster = DMA_MODE_NONE;
/*
if(BaseIoAddressBM_0) {
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddressBM_0);
BaseIoAddressBM_0 = NULL;
}
*/
} else
if(statusByte & BM_STATUS_SIMPLEX_ONLY) {
KdPrint2((PRINT_PREFIX " BM_STATUS => simplexOnly\n"));
simplexOnly = TRUE;
}
}
}
/*
* the Cypress chip is a mess, it contains two ATA functions, but
* both channels are visible on the first one.
* simply ignore the second function for now, as the right
* solution (ignoring the second channel on the first function)
* doesn't work with the crappy ATA interrupt setup on the alpha.
*/
if (dev_id == 0xc6931080 && slotData.u.bits.FunctionNumber > 1) {
KdPrint2((PRINT_PREFIX "dev_id == 0xc6931080 && FunctionNumber > 1 => exit_findbm\n"));
goto exit_findbm;
}
/* do extra chipset specific setups */
AtapiReadChipConfig(HwDeviceExtension, i, CHAN_NOT_SPECIFIED);
AtapiChipInit(HwDeviceExtension, i, CHAN_NOT_SPECIFIED_CHECK_CABLE);
simplexOnly |= deviceExtension->simplexOnly;
deviceExtension->simplexOnly |= simplexOnly;
KdPrint2((PRINT_PREFIX "simplexOnly = %d (2)", simplexOnly));
//TODO: fix hang with UseDpc=TRUE in Simplex mode
//deviceExtension->UseDpc = TRUE;
if(simplexOnly) {
KdPrint2((PRINT_PREFIX "simplexOnly => UseDpc = FALSE\n"));
deviceExtension->UseDpc = FALSE;
}
if(simplexOnly && MasterDev) {
if(deviceExtension->NumberChannels < IDE_DEFAULT_MAX_CHAN) {
KdPrint2((PRINT_PREFIX "set NumberChannels = %d\n", IDE_DEFAULT_MAX_CHAN));
deviceExtension->NumberChannels = IDE_DEFAULT_MAX_CHAN;
if(BaseIoAddressBM_0) {
UniataInitMapBM(deviceExtension,
BaseIoAddressBM_0,
(*ConfigInfo->AccessRanges)[4].RangeInMemory ? TRUE : FALSE);
}
}
}
if((channel > 0) &&
(deviceExtension->NumberChannels > 1)) {
KdPrint2((PRINT_PREFIX "Error: channel > 0 && NumberChannels > 1\n"));
goto exit_findbm;
}
// Indicate number of buses.
ConfigInfo->NumberOfBuses = (UCHAR)(deviceExtension->NumberChannels);
if(!ConfigInfo->InitiatorBusId[0]) {
ConfigInfo->InitiatorBusId[0] = (CHAR)(IoGetConfigurationInformation()->ScsiPortCount);
KdPrint2((PRINT_PREFIX "set ConfigInfo->InitiatorBusId[0] = %#x\n", ConfigInfo->InitiatorBusId[0]));
}
// Indicate four devices can be attached to the adapter
ConfigInfo->MaximumNumberOfTargets = (UCHAR)(deviceExtension->NumberLuns);
if (MasterDev) {
KdPrint2((PRINT_PREFIX "MasterDev (2)\n"));
/*
if((WinVer_Id() > WinVer_NT) ||
(deviceExtension->NumberChannels > 1)) {
KdPrint2((PRINT_PREFIX "2 channels & 2 irq for 1 controller Win 2000+\n"));
if (ConfigInfo->AdapterInterfaceType == MicroChannel) {
ConfigInfo->InterruptMode2 =
ConfigInfo->InterruptMode = LevelSensitive;
} else {
ConfigInfo->InterruptMode2 =
ConfigInfo->InterruptMode = Latched;
}
ConfigInfo->BusInterruptLevel = 14;
ConfigInfo->BusInterruptLevel2 = 15;
} else*/
if(simplexOnly) {
KdPrint2((PRINT_PREFIX "2 channels & 2 irq for 1 controller\n"));
if (ConfigInfo->AdapterInterfaceType == MicroChannel) {
ConfigInfo->InterruptMode2 =
ConfigInfo->InterruptMode = LevelSensitive;
} else {
ConfigInfo->InterruptMode2 =
ConfigInfo->InterruptMode = Latched;
}
ConfigInfo->BusInterruptLevel = 14;
ConfigInfo->BusInterruptLevel2 = 15;
} else {
KdPrint2((PRINT_PREFIX "1 channels & 1 irq for 1 controller\n"));
if (ConfigInfo->AdapterInterfaceType == MicroChannel) {
ConfigInfo->InterruptMode = LevelSensitive;
} else {
ConfigInfo->InterruptMode = Latched;
}
ConfigInfo->BusInterruptLevel = (channel == 0 ? 14 : 15);
}
} else {
KdPrint2((PRINT_PREFIX "!MasterDev\n"));
ConfigInfo->SlotNumber = slotNumber;
ConfigInfo->SystemIoBusNumber = SystemIoBusNumber;
ConfigInfo->InterruptMode = LevelSensitive;
/* primary and secondary channels share the same interrupt */
if(!ConfigInfo->BusInterruptVector ||
(ConfigInfo->BusInterruptVector != pciData.u.type0.InterruptLine)) {
KdPrint2((PRINT_PREFIX "patch irq line = %#x\n", pciData.u.type0.InterruptLine));
ConfigInfo->BusInterruptVector = pciData.u.type0.InterruptLine; // set default value
if(!ConfigInfo->BusInterruptVector) {
KdPrint2((PRINT_PREFIX "patch irq line (2) = 10\n"));
ConfigInfo->BusInterruptVector = 10;
}
}
}
ConfigInfo->MultipleRequestPerLu = TRUE;
ConfigInfo->AutoRequestSense = TRUE;
ConfigInfo->TaggedQueuing = TRUE;
if((WinVer_Id() >= WinVer_NT) ||
(ConfigInfo->Length >= sizeof(_ConfigInfo->comm) + sizeof(_ConfigInfo->nt4))) {
KdPrint2((PRINT_PREFIX "update ConfigInfo->nt4\n"));
_ConfigInfo->nt4.DeviceExtensionSize = sizeof(HW_DEVICE_EXTENSION);
_ConfigInfo->nt4.SpecificLuExtensionSize = sizeof(HW_LU_EXTENSION);
//if(deviceExtension->HwFlags & UNIATA_AHCI) {
_ConfigInfo->nt4.SrbExtensionSize = sizeof(ATA_REQ);
//} else {
// _ConfigInfo->nt4.SrbExtensionSize = FIELD_OFFSET(ATA_REQ, dma_tab) + sizeof(BM_DMA_ENTRY)*ATA_DMA_ENTRIES;
//}
KdPrint2((PRINT_PREFIX "using AtaReq sz %x\n", _ConfigInfo->nt4.SrbExtensionSize));
}
if((WinVer_Id() > WinVer_2k) ||
(ConfigInfo->Length >= sizeof(_ConfigInfo->comm) + sizeof(_ConfigInfo->nt4) + sizeof(_ConfigInfo->w2k))) {
KdPrint2((PRINT_PREFIX "update ConfigInfo->w2k: 64bit %d\n",
deviceExtension->Host64));
#ifdef USE_OWN_DMA
// We need not set Dma64BitAddresses since we perform address translation manually.
#else
_ConfigInfo->w2k.Dma64BitAddresses = deviceExtension->Host64;
#endif //USE_OWN_DMA
_ConfigInfo->w2k.ResetTargetSupported = TRUE;
_ConfigInfo->w2k.MaximumNumberOfLogicalUnits = (UCHAR)deviceExtension->NumberLuns;
}
// Save the Interrupe Mode for later use
deviceExtension->InterruptMode = ConfigInfo->InterruptMode;
deviceExtension->BusInterruptLevel = ConfigInfo->BusInterruptLevel;
deviceExtension->BusInterruptVector = ConfigInfo->BusInterruptVector;
deviceExtension->Channel = channel;
deviceExtension->DevIndex = i;
deviceExtension->OrigAdapterInterfaceType
= ConfigInfo->AdapterInterfaceType;
deviceExtension->AlignmentMask = ConfigInfo->AlignmentMask;
deviceExtension->AdapterInterfaceType = PCIBus;
KdPrint2((PRINT_PREFIX "chan[%d] InterruptMode: %d, Level %d, Level2 %d, Vector %d, Vector2 %d\n",
channel,
ConfigInfo->InterruptMode,
ConfigInfo->BusInterruptLevel,
ConfigInfo->BusInterruptLevel2,
ConfigInfo->BusInterruptVector,
ConfigInfo->BusInterruptVector2
));
found = FALSE;
if(deviceExtension->BusMaster) {
KdPrint2((PRINT_PREFIX "Reconstruct ConfigInfo\n"));
#ifdef USE_OWN_DMA
ConfigInfo->NeedPhysicalAddresses = FALSE;
#else
ConfigInfo->NeedPhysicalAddresses = TRUE;
#endif //USE_OWN_DMA
if(!MasterDev) {
//#ifdef USE_OWN_DMA
// KdPrint2((PRINT_PREFIX "!MasterDev, own DMA\n"));
//#else
KdPrint2((PRINT_PREFIX "set Dma32BitAddresses\n"));
ConfigInfo->Dma32BitAddresses = TRUE;
//#endif //USE_OWN_DMA
}
// thanks to Vitaliy Vorobyov aka deathsoft@yandex.ru for
// better solution:
if(AltInit) {
// I'm sorry, I have to do this
// when Win doesn't
if(ConfigInfo->AdapterInterfaceType == Isa /*&&
// InDriverEntry*/) {
KdPrint2((PRINT_PREFIX "AdapterInterfaceType Isa => PCIBus\n"));
ConfigInfo->AdapterInterfaceType = PCIBus;
}
if(ConfigInfo->AdapterInterfaceType == PCIBus /*&&
// InDriverEntry*/) {
KdPrint2((PRINT_PREFIX "AdapterInterfaceType PCIBus, update address\n"));
ConfigInfo->SlotNumber = slotNumber;
ConfigInfo->SystemIoBusNumber = SystemIoBusNumber;
}
}
#ifndef USE_OWN_DMA
ConfigInfo->Master = TRUE;
ConfigInfo->DmaWidth = Width16Bits;
#endif //USE_OWN_DMA
ConfigInfo->ScatterGather = TRUE;
}
ConfigInfo->MapBuffers = TRUE; // Need for PIO and OWN_DMA
ConfigInfo->CachesData = TRUE;
KdPrint2((PRINT_PREFIX "BMList[i].channel %#x, NumberChannels %#x, channel %#x\n",BMList[i].channel, deviceExtension->NumberChannels, channel));
for (; channel < (BMList[i].channel + deviceExtension->NumberChannels); channel++, c++) {
KdPrint2((PRINT_PREFIX "de %#x, Channel %#x\n",deviceExtension, channel));
//PrintNtConsole("de %#x, Channel %#x, nchan %#x\n",deviceExtension, channel, deviceExtension->NumberChannels);
chan = &deviceExtension->chan[c];
KdPrint2((PRINT_PREFIX "chan = %#x\n", chan));
//PrintNtConsole("chan = %#x, c=%#x\n", chan, c);
AtapiSetupLunPtrs(chan, deviceExtension, c);
/* do extra channel-specific setups */
AtapiReadChipConfig(HwDeviceExtension, i, channel);
//AtapiChipInit(HwDeviceExtension, i, channel);
if(deviceExtension->HwFlags & UNIATA_AHCI) {
KdPrint2((PRINT_PREFIX " No more setup for AHCI channel\n"));
} else
if(deviceExtension->AltRegMap) {
KdPrint2((PRINT_PREFIX " Non-standard registers layout\n"));
} else {
// Check if the range specified is not used by another driver
if(MasterDev) {
KdPrint2((PRINT_PREFIX "set AccessRanges\n"));
(*ConfigInfo->AccessRanges)[channel * 2 + 0].RangeStart =
ScsiPortConvertUlongToPhysicalAddress(channel ? IO_WD2 : IO_WD1);
(*ConfigInfo->AccessRanges)[channel * 2 + 0].RangeLength = ATA_IOSIZE;
(*ConfigInfo->AccessRanges)[channel * 2 + 1].RangeStart =
ScsiPortConvertUlongToPhysicalAddress((channel ? IO_WD2 : IO_WD1) + ATA_ALTOFFSET);
(*ConfigInfo->AccessRanges)[channel * 2 + 1].RangeLength = ATA_ALTIOSIZE;
} else
if(AltInit &&
!(*ConfigInfo->AccessRanges)[channel * 2 + 0].RangeStart.QuadPart &&
!(*ConfigInfo->AccessRanges)[channel * 2 + 1].RangeStart.QuadPart) {
KdPrint2((PRINT_PREFIX "cheat ScsiPort, sync real PCI and ConfigInfo IO ranges\n"));
AtapiGetIoRange(HwDeviceExtension, ConfigInfo, &pciData, SystemIoBusNumber,
channel * 2 + 0, 0, ATA_IOSIZE);
AtapiGetIoRange(HwDeviceExtension, ConfigInfo, &pciData, SystemIoBusNumber,
channel * 2 + 1, 0, ATA_ALTIOSIZE);
}
IoBasePort1 = (*ConfigInfo->AccessRanges)[channel * 2 + 0].RangeStart;
IoBasePort2 = (*ConfigInfo->AccessRanges)[channel * 2 + 1].RangeStart;
if(!MasterDev) {
if(!IoBasePort1.QuadPart || !IoBasePort2.QuadPart) {
KdPrint2((PRINT_PREFIX "ScsiPortValidateRange failed (1)\n"));
continue;
}
}
if(!ScsiPortValidateRange(HwDeviceExtension,
PCIBus /*ConfigInfo->AdapterInterfaceType*/,
SystemIoBusNumber /*ConfigInfo->SystemIoBusNumber*/,
IoBasePort1,
ATA_IOSIZE,
TRUE) ) {
KdPrint2((PRINT_PREFIX "ScsiPortValidateRange failed (1)\n"));
continue;
}
if(!ScsiPortValidateRange(HwDeviceExtension,
PCIBus /*ConfigInfo->AdapterInterfaceType*/,
SystemIoBusNumber /*ConfigInfo->SystemIoBusNumber*/,
IoBasePort2,
ATA_ALTIOSIZE,
TRUE) ) {
KdPrint2((PRINT_PREFIX "ScsiPortValidateRange failed (2)\n"));
continue;
}
KdPrint2((PRINT_PREFIX "Getting IO ranges\n"));
// Ok, translate adresses to io-space
if(ScsiPortConvertPhysicalAddressToUlong(IoBasePort2)) {
if(!(MasterDev /* || USE_16_BIT */)) {
KdPrint2((PRINT_PREFIX "!MasterDev mode\n"));
IoBasePort2 = ScsiPortConvertUlongToPhysicalAddress(
ScsiPortConvertPhysicalAddressToUlong(IoBasePort2) + 2);
}
} else {
KdPrint2((PRINT_PREFIX "use relative IoBasePort2\n"));
IoBasePort2 = ScsiPortConvertUlongToPhysicalAddress(
ScsiPortConvertPhysicalAddressToUlong(IoBasePort1) + ATA_PCCARD_ALTOFFSET);
}
// Get the system physical address for this IO range.
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
MasterDev ? ConfigInfo->AdapterInterfaceType : PCIBus /*ConfigInfo->AdapterInterfaceType*/,
MasterDev ? ConfigInfo->SystemIoBusNumber : SystemIoBusNumber /*ConfigInfo->SystemIoBusNumber*/,
IoBasePort1,
ATA_IOSIZE,
TRUE);
KdPrint2((PRINT_PREFIX "IO range 1 %#x\n",ioSpace));
// Check if ioSpace accessible.
if (!ioSpace) {
KdPrint2((PRINT_PREFIX "!ioSpace\n"));
continue;
}
/*
if(deviceExtension->BusMaster) {
KdPrint2((PRINT_PREFIX "set BusMaster io-range in DO\n"));
// bm_offset already includes (channel ? ATA_BM_OFFSET1 : 0)
deviceExtension->BaseIoAddressBM[c] = (PIDE_BUSMASTER_REGISTERS)
((ULONG)(deviceExtension->BaseIoAddressBM_0) + bm_offset + (c ? ATA_BM_OFFSET1 : 0));
}
*/
//deviceExtension->BaseIoAddress1[c] = (PIDE_REGISTERS_1)(ioSpace);
BaseIoAddress1[c] = (PIDE_REGISTERS_1)(ioSpace);
// Get the system physical address for the second IO range.
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
MasterDev ? ConfigInfo->AdapterInterfaceType : PCIBus /*ConfigInfo->AdapterInterfaceType*/,
MasterDev ? ConfigInfo->SystemIoBusNumber : SystemIoBusNumber /*ConfigInfo->SystemIoBusNumber*/,
IoBasePort2,
ATA_ALTIOSIZE,
TRUE);
KdPrint2((PRINT_PREFIX "IO range 2 %#x\n",ioSpace));
BaseIoAddress2[c] = (PIDE_REGISTERS_2)(ioSpace);
if(!ioSpace) {
// Release all allocated resources
KdPrint2((PRINT_PREFIX "!deviceExtension->BaseIoAddress2\n"));
//ioSpace = (PUCHAR)BaseIoAddress1[c];
// goto free_iospace_1;
found = FALSE;
goto exit_findbm;
}
UniataInitMapBase(chan, BaseIoAddress1[c], BaseIoAddress2[c]);
}
//ioSpace = (PUCHAR)(deviceExtension->BaseIoAddress1[c]);
DbgDumpRegTranslation(chan, IDX_IO1);
DbgDumpRegTranslation(chan, IDX_IO2);
DbgDumpRegTranslation(chan, IDX_BM_IO);
DbgDumpRegTranslation(chan, IDX_SATA_IO);
if(!(deviceExtension->HwFlags & UNIATA_AHCI)) {
#ifdef _DEBUG
UniataDumpATARegs(chan);
#endif
#ifndef UNIATA_CORE
#ifdef UNIATA_INIT_ON_PROBE
// if(deviceExtension->HwFlags & UNIATA_SATA) {
//#endif //UNIATA_INIT_ON_PROBE
KdPrint2((PRINT_PREFIX "Check drive 0\n"));
// Check master.
SelectDrive(chan, 0);
AtapiStallExecution(10);
GetBaseStatus(chan, statusByte);
skip_find_dev = FALSE;
if(!(deviceExtension->HwFlags & UNIATA_NO_SLAVE) && (deviceExtension->NumberLuns > 1)) {
if ((statusByte & 0xf8) == 0xf8 ||
(statusByte == 0xa5)) {
// Check slave.
KdPrint2((PRINT_PREFIX "Check drive 1\n"));
SelectDrive(chan, 1);
AtapiStallExecution(1);
GetBaseStatus(chan, statusByte);
if ((statusByte & 0xf8) == 0xf8 ||
(statusByte == 0xa5)) {
// No controller at this base address.
KdPrint2((PRINT_PREFIX "Empty channel\n"));
skip_find_dev = TRUE;
}
}
}
// Search for devices on this controller.
if (!skip_find_dev &&
FindDevices(HwDeviceExtension,
0,
c)) {
KdPrint2((PRINT_PREFIX "Found some devices\n"));
found = TRUE;
} else {
KdPrint2((PRINT_PREFIX "no devices\n"));
/* KeBugCheckEx(0xc000000e,
ScsiPortConvertPhysicalAddressToUlong(IoBasePort1),
ScsiPortConvertPhysicalAddressToUlong(IoBasePort2),
(ULONG)(deviceExtension->BaseIoAddressBM[c]), skip_find_dev);*/
}
//#ifdef UNIATA_INIT_ON_PROBE
// }
#else //UNIATA_INIT_ON_PROBE
KdPrint2((PRINT_PREFIX "clean IDE intr 0\n"));
SelectDrive(chan, 0);
AtapiStallExecution(10);
GetBaseStatus(chan, statusByte);
if(!(deviceExtension->HwFlags & UNIATA_NO_SLAVE) && (deviceExtension->NumberLuns > 1)) {
KdPrint2((PRINT_PREFIX "clean IDE intr 1\n"));
SelectDrive(chan, 1);
AtapiStallExecution(1);
GetBaseStatus(chan, statusByte);
SelectDrive(chan, 0);
}
statusByte = GetDmaStatus(deviceExtension, c);
KdPrint2((PRINT_PREFIX " DMA status %#x\n", statusByte));
if(statusByte & BM_STATUS_INTR) {
// bullshit, we have DMA interrupt, but had never initiate DMA operation
KdPrint2((PRINT_PREFIX " clear unexpected DMA intr\n"));
AtapiDmaDone(deviceExtension, 0, c, NULL);
GetBaseStatus(chan, statusByte);
}
#endif //UNIATA_INIT_ON_PROBE
}
found = TRUE;
chan->PrimaryAddress = FALSE;
// Claim primary or secondary ATA IO range.
if (MasterDev) {
KdPrint2((PRINT_PREFIX "claim Compatible controller\n"));
if (channel == 0) {
KdPrint2((PRINT_PREFIX "claim Primary\n"));
AtdiskPrimaryClaimed =
ConfigInfo->AtdiskPrimaryClaimed = TRUE;
chan->PrimaryAddress = TRUE;
FirstMasterOk = TRUE;
} else
if (channel == 1) {
KdPrint2((PRINT_PREFIX "claim Secondary\n"));
AtdiskSecondaryClaimed =
ConfigInfo->AtdiskSecondaryClaimed = TRUE;
FirstMasterOk = TRUE;
}
} else {
if(chan->RegTranslation[IDX_IO1].Addr == IO_WD1 &&
!chan->RegTranslation[IDX_IO1].MemIo) {
KdPrint2((PRINT_PREFIX "claim Primary (PCI over ISA range)\n"));
AtdiskPrimaryClaimed =
ConfigInfo->AtdiskPrimaryClaimed = TRUE;
}
if(chan->RegTranslation[IDX_IO1].Addr == IO_WD2 &&
!chan->RegTranslation[IDX_IO1].MemIo) {
KdPrint2((PRINT_PREFIX "claim Secondary (PCI over ISA range)\n"));
AtdiskSecondaryClaimed =
ConfigInfo->AtdiskSecondaryClaimed = TRUE;
}
}
AtapiDmaAlloc(HwDeviceExtension, ConfigInfo, c);
#else //UNIATA_CORE
}
found = TRUE;
#endif //UNIATA_CORE
} // end for(channel)
exit_findbm:
#ifndef UNIATA_CORE
if(!found) {
KdPrint2((PRINT_PREFIX "exit: !found\n"));
if(BaseIoAddress1[0])
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddress1[0]);
if(BaseIoAddress2[0])
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddress2[0]);
if(BaseIoAddress1[1])
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddress1[1]);
if(BaseIoAddress2[1])
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddress2[1]);
if(BaseIoAddressBM_0)
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddressBM_0);
if(deviceExtension->BaseIoAHCI_0.Addr) {
ScsiPortFreeDeviceBase(HwDeviceExtension,
deviceExtension->BaseIoAHCI_0.pAddr);
}
KdPrint2((PRINT_PREFIX "return SP_RETURN_NOT_FOUND\n"));
goto exit_notfound;
} else {
KdPrint2((PRINT_PREFIX "exit: init spinlock\n"));
//KeInitializeSpinLock(&(deviceExtension->DpcSpinLock));
deviceExtension->ActiveDpcChan =
deviceExtension->FirstDpcChan = CHAN_NOT_SPECIFIED;
BMList[i].Isr2Enable = FALSE;
KdPrint2((PRINT_PREFIX "MasterDev=%#x, NumberChannels=%#x, Isr2DevObj=%#x\n",
MasterDev, deviceExtension->NumberChannels, BMList[i].Isr2DevObj));
// ConnectIntr2 should be moved to HwInitialize
status = UniataConnectIntr2(HwDeviceExtension);
KdPrint2((PRINT_PREFIX "MasterDev=%#x, NumberChannels=%#x, Isr2DevObj=%#x\n",
MasterDev, deviceExtension->NumberChannels, BMList[i].Isr2DevObj));
if(/*WinVer_WDM_Model &&*/ MasterDev) {
KdPrint2((PRINT_PREFIX "do not tell system, that we know about PCI IO ranges\n"));
/* if(BaseIoAddressBM_0) {
ScsiPortFreeDeviceBase(HwDeviceExtension,
BaseIoAddressBM_0);
}*/
(*ConfigInfo->AccessRanges)[4].RangeStart = ScsiPortConvertUlongToPhysicalAddress(0);
(*ConfigInfo->AccessRanges)[4].RangeLength = 0;
(*ConfigInfo->AccessRanges)[5].RangeStart = ScsiPortConvertUlongToPhysicalAddress(0);
(*ConfigInfo->AccessRanges)[5].RangeLength = 0;
}
if(!NT_SUCCESS(status)) {
KdPrint2((PRINT_PREFIX "failed\n"));
found = FALSE;
goto exit_findbm;
}
KdPrint2((PRINT_PREFIX "final chan[%d] InterruptMode: %d, Level %d, Level2 %d, Vector %d, Vector2 %d\n",
channel,
ConfigInfo->InterruptMode,
ConfigInfo->BusInterruptLevel,
ConfigInfo->BusInterruptLevel2,
ConfigInfo->BusInterruptVector,
ConfigInfo->BusInterruptVector2
));
}
#endif //UNIATA_CORE
KdPrint2((PRINT_PREFIX "return SP_RETURN_FOUND\n"));
//PrintNtConsole("return SP_RETURN_FOUND, de %#x, c0.lun0 %#x\n", deviceExtension, deviceExtension->chan[0].lun[0]);
if(MasterDev) {
KdPrint2((PRINT_PREFIX "Attempt %d of MasterDev ok\n", AltInit));
FirstMasterOk = TRUE;
}
ConfigInfo->NumberOfBuses++; // add virtual channel for communication port
return SP_RETURN_FOUND;
exit_error:
UniataFreeLunExt(deviceExtension);
return SP_RETURN_ERROR;
exit_notfound:
UniataFreeLunExt(deviceExtension);
return SP_RETURN_NOT_FOUND;
} // end UniataFindBusMasterController()
#ifndef UNIATA_CORE
/*
This is for claiming PCI Busmaster in compatible mode under WDM OSes
*/
NTSTATUS
NTAPI
UniataClaimLegacyPCIIDE(
ULONG i
)
{
NTSTATUS status;
PCM_RESOURCE_LIST resourceList = NULL;
UNICODE_STRING devname;
KdPrint2((PRINT_PREFIX "UniataClaimLegacyPCIIDE:\n"));
if(BMList[i].PciIdeDevObj) {
KdPrint2((PRINT_PREFIX "Already initialized\n"));
return STATUS_UNSUCCESSFUL;
}
RtlInitUnicodeString(&devname, L"\\Device\\uniata_PCIIDE");
status = IoCreateDevice(SavedDriverObject, sizeof(PCIIDE_DEVICE_EXTENSION),
/*NULL*/ &devname, FILE_DEVICE_UNKNOWN,
0, FALSE, &(BMList[i].PciIdeDevObj));
if(!NT_SUCCESS(status)) {
KdPrint2((PRINT_PREFIX "IoCreateDevice failed %#x\n", status));
return status;
}
resourceList = (PCM_RESOURCE_LIST) ExAllocatePool(PagedPool,
sizeof(CM_RESOURCE_LIST));
if (!resourceList) {
KdPrint2((PRINT_PREFIX "!resourceList\n"));
status = STATUS_INSUFFICIENT_RESOURCES;
del_do:
IoDeleteDevice(BMList[i].PciIdeDevObj);
BMList[i].PciIdeDevObj = NULL;
return status;
}
RtlZeroMemory(
resourceList,
sizeof(CM_RESOURCE_LIST));
// IoReportDetectedDevice() should be used for WDM OSes
// TODO: check if resourceList is actually used inside HalAssignSlotResources()
// Note: with empty resourceList call to HalAssignSlotResources() fails on some HW
// e.g. Intel ICH4, but works with non-empty.
resourceList->Count = 1;
resourceList->List[0].InterfaceType = PCIBus;
resourceList->List[0].BusNumber = BMList[i].busNumber;
// we do not report IO ranges since they are used/claimed by ISA part(s)
resourceList->List[0].PartialResourceList.Count = 0;
RtlInitUnicodeString(&devname, L"PCIIDE");
status = HalAssignSlotResources(&SavedRegPath,
&devname,
SavedDriverObject,
BMList[i].PciIdeDevObj,
PCIBus,
BMList[i].busNumber,
BMList[i].slotNumber,
&resourceList);
if (!NT_SUCCESS(status)) {
KdPrint2((PRINT_PREFIX "HalAssignSlotResources failed %#x\n", status));
// this is always deallocated inside HalAssignSlotResources() implementation
//ExFreePool(resourceList);
goto del_do;
}
KdPrint2((PRINT_PREFIX "ok %#x\n", status));
BMList[i].ChanInitOk |= 0x80;
return status;
} // end UniataClaimLegacyPCIIDE()
/*++
Routine Description:
This function is called to initialize 2nd device object for
multichannel controllers.
Arguments:
HwDeviceExtension - HBA miniport driver's adapter data storage
Return Value:
ULONG
--*/
NTSTATUS
NTAPI
UniataConnectIntr2(
IN PVOID HwDeviceExtension
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
ULONG i = deviceExtension->DevIndex;
NTSTATUS status;
PISR2_DEVICE_EXTENSION Isr2DevExt;
WCHAR devname_str[33];
UNICODE_STRING devname;
KdPrint2((PRINT_PREFIX "Init ISR:\n"));
/*
We MUST register 2nd ISR for multichannel controllers even for UP systems.
This is needed for cases when
multichannel controller generate interrupt while we are still in its ISR for
other channle's interrupt. New interrupt must be detected and queued for
further processing. If we do not do this, system will not route this
interrupt to main ISR (since it is busy) and we shall get to infinite loop
looking for interrupt handler.
*/
if(!deviceExtension->MasterDev && (deviceExtension->NumberChannels > 1) && // do not touch MasterDev
!deviceExtension->simplexOnly && /* // this is unnecessary on simplex controllers
!BMList[i].Isr2DevObj*/ // handle re-init under w2k+
/*!ForceSimplex*/
/*(CPU_num > 1) && // unnecessary for UP systems*/
TRUE) {
// Ok, continue...
KdPrint2((PRINT_PREFIX "Multichannel native mode, go...\n"));
#ifndef UNIATA_USE_XXableInterrupts
// If we raise IRQL to TIMER value, other interrupt cannot occure on the same CPU
/* if(KeNumberProcessors < 2) {
KdPrint2((PRINT_PREFIX "Unnecessary (?), UP machine\n"));
//return STATUS_SUCCESS;
}*/
#endif //UNIATA_USE_XXableInterrupts
} else {
KdPrint2((PRINT_PREFIX "Unnecessary\n"));
return STATUS_SUCCESS;
}
if(BMList[i].Isr2DevObj) {
KdPrint2((PRINT_PREFIX "Already initialized [%d] %#x\n", i, BMList[i].Isr2DevObj));
return STATUS_SUCCESS;
}
KdPrint2((PRINT_PREFIX "Create DO\n"));
devname.Length =
_snwprintf(devname_str, sizeof(devname_str)/sizeof(WCHAR)-1,
L"\\Device\\uniata%d_2ch", i);
devname_str[devname.Length] = 0;
devname.Length *= sizeof(WCHAR);
devname.MaximumLength = devname.Length;
devname.Buffer = devname_str;
KdPrint2((PRINT_PREFIX "DO name: len(%d, %d), %S\n", devname.Length, devname.MaximumLength, devname.Buffer));
status = IoCreateDevice(SavedDriverObject, sizeof(ISR2_DEVICE_EXTENSION),
/*NULL*/ &devname, FILE_DEVICE_UNKNOWN,
0, FALSE, &(BMList[i].Isr2DevObj));
if(!NT_SUCCESS(status)) {
KdPrint2((PRINT_PREFIX "IoCreateDevice failed %#x\n", status));
return status;
}
KdPrint2((PRINT_PREFIX "HalGetInterruptVector\n"));
KdPrint2((PRINT_PREFIX " OrigAdapterInterfaceType=%d\n", deviceExtension->OrigAdapterInterfaceType));
KdPrint2((PRINT_PREFIX " SystemIoBusNumber=%d\n", deviceExtension->SystemIoBusNumber));
KdPrint2((PRINT_PREFIX " BusInterruptLevel=%d\n", deviceExtension->BusInterruptLevel));
KdPrint2((PRINT_PREFIX " BusInterruptVector=%d\n", deviceExtension->BusInterruptVector));
BMList[i].Isr2Vector = HalGetInterruptVector(
deviceExtension->OrigAdapterInterfaceType,
deviceExtension->SystemIoBusNumber,
deviceExtension->BusInterruptLevel,
deviceExtension->BusInterruptVector,
&(BMList[i].Isr2Irql),
&(BMList[i].Isr2Affinity));
Isr2DevExt = (PISR2_DEVICE_EXTENSION)(BMList[i].Isr2DevObj->DeviceExtension);
Isr2DevExt->HwDeviceExtension = deviceExtension;
Isr2DevExt->DevIndex = i;
KdPrint2((PRINT_PREFIX "isr2_de %#x\n", Isr2DevExt));
KdPrint2((PRINT_PREFIX "isr2_vector %#x\n", BMList[i].Isr2Vector));
KdPrint2((PRINT_PREFIX "isr2_irql %#x\n", BMList[i].Isr2Irql));
KdPrint2((PRINT_PREFIX "isr2_affinity %#x\n", BMList[i].Isr2Affinity));
// deviceExtension->QueueNewIrql = BMList[i].Isr2Irql;
KdPrint2((PRINT_PREFIX "IoConnectInterrupt\n"));
status = IoConnectInterrupt(
&(BMList[i].Isr2InterruptObject),
AtapiInterrupt2,
Isr2DevExt,
NULL,
BMList[i].Isr2Vector,
BMList[i].Isr2Irql,
BMList[i].Isr2Irql,
(KINTERRUPT_MODE)(deviceExtension->InterruptMode),
TRUE,
BMList[i].Isr2Affinity,
FALSE);
if(!NT_SUCCESS(status)) {
KdPrint2((PRINT_PREFIX "IoConnectInterrupt failed\n"));
IoDeleteDevice(BMList[i].Isr2DevObj);
BMList[i].Isr2DevObj = NULL;
BMList[i].Isr2InterruptObject = NULL;
return status;
}
//deviceExtension->Isr2DevObj = BMList[i].Isr2DevObj;
return status;
} // end UniataConnectIntr2()
NTSTATUS
NTAPI
UniataDisconnectIntr2(
IN PVOID HwDeviceExtension
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
ULONG i = deviceExtension->DevIndex;
// NTSTATUS status;
KdPrint2((PRINT_PREFIX "Deinit ISR:\n"));
if(!BMList[i].Isr2DevObj) {
KdPrint2((PRINT_PREFIX "Already uninitialized %#x\n"));
return STATUS_SUCCESS;
}
IoDisconnectInterrupt(BMList[i].Isr2InterruptObject);
BMList[i].Isr2InterruptObject = NULL;
IoDeleteDevice(BMList[i].Isr2DevObj);
BMList[i].Isr2DevObj = NULL;
//deviceExtension->Isr2DevObj = NULL;
return STATUS_SUCCESS;
} // end UniataDisconnectIntr2()
#endif //UNIATA_CORE
BOOLEAN
NTAPI
AtapiCheckIOInterference(
IN PPORT_CONFIGURATION_INFORMATION ConfigInfo,
ULONG portBase) {
// check if Primary/Secondary Master IDE claimed
if((portBase == IO_WD1) &&
(ConfigInfo->AtdiskPrimaryClaimed || AtdiskPrimaryClaimed)) {
KdPrint2((PRINT_PREFIX "AtapiCheckIOInterference: AtdiskPrimaryClaimed\n"));
return TRUE;
} else
if((portBase == IO_WD2) &&
(ConfigInfo->AtdiskSecondaryClaimed || AtdiskSecondaryClaimed)) {
KdPrint2((PRINT_PREFIX "AtapiCheckIOInterference: AtdiskSecondaryClaimed\n"));
return TRUE;
}
return FALSE;
} // end AtapiCheckIOInterference()
/*++
Routine Description:
This function is called by the OS-specific port driver after
the necessary storage has been allocated, to gather information
about the adapter's configuration.
Arguments:
HwDeviceExtension - HBA miniport driver's adapter data storage
Context - Address of adapter count
ArgumentString - Used to determine whether driver is client of ntldr or crash dump utility.
ConfigInfo - Configuration information structure describing HBA
Again - Indicates search for adapters to continue
Return Value:
ULONG
--*/
ULONG
NTAPI
AtapiFindIsaController(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PHW_CHANNEL chan;
PULONG adapterCount = (PULONG)Context;
PUCHAR ioSpace = NULL;
ULONG i;
ULONG irq=0;
ULONG portBase=0;
ULONG retryCount;
// BOOLEAN atapiOnly;
UCHAR statusByte, statusByte2;
BOOLEAN preConfig = FALSE;
//
PIDE_REGISTERS_1 BaseIoAddress1;
PIDE_REGISTERS_2 BaseIoAddress2 = NULL;
// The following table specifies the ports to be checked when searching for
// an IDE controller. A zero entry terminates the search.
static CONST ULONG AdapterAddresses[5] = {IO_WD1, IO_WD2, IO_WD1-8, IO_WD2-8, 0};
// CONST UCHAR Channels[5] = {0, 1, 0, 1, 0};
// The following table specifies interrupt levels corresponding to the
// port addresses in the previous table.
static CONST ULONG InterruptLevels[5] = {14, 15, 11, 10, 0};
KdPrint2((PRINT_PREFIX "AtapiFindIsaController (ISA):\n"));
if (!deviceExtension) {
return SP_RETURN_ERROR;
}
RtlZeroMemory(deviceExtension, sizeof(HW_DEVICE_EXTENSION));
KdPrint2((PRINT_PREFIX " assume max PIO4\n"));
deviceExtension->MaxTransferMode = ATA_PIO4;
deviceExtension->NumberChannels = 1;
deviceExtension->NumberLuns = IDE_MAX_LUN_PER_CHAN; // default
if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) {
goto exit_error;
}
chan = &(deviceExtension->chan[0]);
AtapiSetupLunPtrs(chan, deviceExtension, 0);
deviceExtension->AdapterInterfaceType =
deviceExtension->OrigAdapterInterfaceType
= ConfigInfo->AdapterInterfaceType;
#ifndef UNIATA_CORE
/* do extra chipset specific setups */
AtapiReadChipConfig(HwDeviceExtension, DEVNUM_NOT_SPECIFIED, CHAN_NOT_SPECIFIED);
AtapiChipInit(HwDeviceExtension, DEVNUM_NOT_SPECIFIED, CHAN_NOT_SPECIFIED);
// Check to see if this is a special configuration environment.
portBase = irq = 0;
if (ArgumentString) {
irq = AtapiParseArgumentString(ArgumentString, "Interrupt");
if (irq ) {
// Both parameters must be present to proceed
portBase = AtapiParseArgumentString(ArgumentString, "BaseAddress");
if (!portBase) {
// Try a default search for the part.
irq = 0;
}
}
}
#endif //UNIATA_CORE
/*
for(i=0; i<2; i++) {
if((*ConfigInfo->AccessRanges)[i].RangeStart) {
KdPrint2((PRINT_PREFIX " IoRange[%d], start %#x, len %#x, mem %#x\n",
i,
ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[i].RangeStart),
(*ConfigInfo->AccessRanges)[i].RangeLength,
(*ConfigInfo->AccessRanges)[i].RangeInMemory
));
}
}
*/
// if((*ConfigInfo->AccessRanges)[0].RangeStart) {
portBase = ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[0].RangeStart);
// }
if(portBase) {
if(!AtapiCheckIOInterference(ConfigInfo, portBase)) {
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
ConfigInfo->AdapterInterfaceType,
ConfigInfo->SystemIoBusNumber,
(*ConfigInfo->AccessRanges)[0].RangeStart,
(*ConfigInfo->AccessRanges)[0].RangeLength,
(BOOLEAN) !((*ConfigInfo->AccessRanges)[0].RangeInMemory));
} else {
// do not touch resources, just fail later inside loop on next call to
// AtapiCheckIOInterference()
}
*Again = FALSE;
// Since we have pre-configured information we only need to go through this loop once
preConfig = TRUE;
KdPrint2((PRINT_PREFIX " preconfig, portBase=%x, len=%x\n", portBase, (*ConfigInfo->AccessRanges)[0].RangeLength));
}
// Scan through the adapter address looking for adapters.
#ifndef UNIATA_CORE
while (AdapterAddresses[*adapterCount] != 0) {
#else
do {
#endif //UNIATA_CORE
retryCount = 4;
deviceExtension->DevIndex = (*adapterCount); // this is used inside AtapiRegCheckDevValue()
KdPrint2((PRINT_PREFIX "AtapiFindIsaController: adapterCount=%d\n", *adapterCount));
for (i = 0; i < deviceExtension->NumberLuns; i++) {
// Zero device fields to ensure that if earlier devices were found,
// but not claimed, the fields are cleared.
deviceExtension->lun[i].DeviceFlags &= ~(DFLAGS_ATAPI_DEVICE | DFLAGS_DEVICE_PRESENT | DFLAGS_TAPE_DEVICE);
}
// Get the system physical address for this IO range.
// Check if configInfo has the default information
// if not, we go and find ourselves
if (preConfig == FALSE) {
ULONG portBase_reg = 0;
ULONG irq_reg = 0;
if (!portBase) {
portBase = AdapterAddresses[*adapterCount];
KdPrint2((PRINT_PREFIX "portBase[%d]=%x\n", *adapterCount, portBase));
} else {
KdPrint2((PRINT_PREFIX "portBase=%x\n", portBase));
}
portBase_reg = AtapiRegCheckDevValue(deviceExtension, CHAN_NOT_SPECIFIED, DEVNUM_NOT_SPECIFIED, L"PortBase", 0);
irq_reg = AtapiRegCheckDevValue(deviceExtension, CHAN_NOT_SPECIFIED, DEVNUM_NOT_SPECIFIED, L"Irq", 0);
if(portBase_reg && irq_reg) {
KdPrint2((PRINT_PREFIX "use registry settings portBase=%x, irq=%d\n", portBase_reg, irq_reg));
portBase = portBase_reg;
irq = irq_reg;
}
// check if Primary/Secondary Master IDE claimed
if(AtapiCheckIOInterference(ConfigInfo, portBase)) {
goto next_adapter;
}
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
ConfigInfo->AdapterInterfaceType,
ConfigInfo->SystemIoBusNumber,
ScsiPortConvertUlongToPhysicalAddress(portBase),
ATA_IOSIZE,
TRUE);
} else {
KdPrint2((PRINT_PREFIX "preconfig portBase=%x\n", portBase));
// Check if Primary/Secondary Master IDE claimed
// We can also get here from preConfig branc with conflicting portBase
// (and thus, w/o ioSpace allocated)
if(AtapiCheckIOInterference(ConfigInfo, portBase)) {
goto not_found;
}
}
BaseIoAddress1 = (PIDE_REGISTERS_1)ioSpace;
next_adapter:
// Update the adapter count.
(*adapterCount)++;
// Check if ioSpace accessible.
if (!ioSpace) {
KdPrint2((PRINT_PREFIX "AtapiFindIsaController: !ioSpace\n"));
portBase = 0;
continue;
}
// Get the system physical address for the second IO range.
if (BaseIoAddress1) {
if(preConfig &&
!ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[1].RangeStart)) {
KdPrint2((PRINT_PREFIX "AtapiFindIsaController: PCMCIA ?\n"));
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
ConfigInfo->AdapterInterfaceType,
ConfigInfo->SystemIoBusNumber,
ScsiPortConvertUlongToPhysicalAddress((ULONGIO_PTR)BaseIoAddress1 + 0x0E),
ATA_ALTIOSIZE,
TRUE);
} else {
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
ConfigInfo->AdapterInterfaceType,
ConfigInfo->SystemIoBusNumber,
ScsiPortConvertUlongToPhysicalAddress((ULONGIO_PTR)BaseIoAddress1 + ATA_ALTOFFSET),
ATA_ALTIOSIZE,
TRUE);
}
}
BaseIoAddress2 = (PIDE_REGISTERS_2)ioSpace;
KdPrint2((PRINT_PREFIX " BaseIoAddress1=%x\n", BaseIoAddress1));
KdPrint2((PRINT_PREFIX " BaseIoAddress2=%x\n", BaseIoAddress2));
if(!irq) {
KdPrint2((PRINT_PREFIX " expected InterruptLevel=%x\n", InterruptLevels[*adapterCount - 1]));
}
UniataInitMapBase(chan, BaseIoAddress1, BaseIoAddress2);
UniataInitMapBM(deviceExtension, 0, FALSE);
#ifdef _DEBUG
UniataDumpATARegs(chan);
#endif
// Select master.
SelectDrive(chan, 0);
statusByte = AtapiReadPort1(chan, IDX_IO1_i_Status);
statusByte2 = AtapiReadPort1(chan, IDX_IO2_AltStatus);
if((statusByte ^ statusByte2) & ~IDE_STATUS_INDEX) {
KdPrint2((PRINT_PREFIX "AtapiFindIsaController: Status %x vs AltStatus %x missmatch, abort init ?\n", statusByte, statusByte2));
if(BaseIoAddress2) {
ScsiPortFreeDeviceBase(HwDeviceExtension,
(PCHAR)BaseIoAddress2);
BaseIoAddress2 = NULL;
}
BaseIoAddress2 = (PIDE_REGISTERS_2)((ULONGIO_PTR)BaseIoAddress1 + 0x0E);
KdPrint2((PRINT_PREFIX " try BaseIoAddress2=%x\n", BaseIoAddress2));
ioSpace = (PUCHAR)ScsiPortGetDeviceBase(HwDeviceExtension,
ConfigInfo->AdapterInterfaceType,
ConfigInfo->SystemIoBusNumber,
ScsiPortConvertUlongToPhysicalAddress((ULONGIO_PTR)BaseIoAddress2),
ATA_ALTIOSIZE,
TRUE);
if(!ioSpace) {
BaseIoAddress2 = NULL;
KdPrint2((PRINT_PREFIX " abort (0)\n"));
goto not_found;
}
UniataInitMapBase(chan, BaseIoAddress1, BaseIoAddress2);
statusByte = AtapiReadPort1(chan, IDX_IO1_i_Status);
statusByte2 = AtapiReadPort1(chan, IDX_IO2_AltStatus);
if((statusByte ^ statusByte2) & ~IDE_STATUS_INDEX) {
KdPrint2((PRINT_PREFIX " abort: Status %x vs AltStatus %x missmatch\n", statusByte, statusByte2));
goto not_found;
}
}
retryIdentifier:
// Select master.
SelectDrive(chan, 0);
// Check if card at this address.
AtapiWritePort1(chan, IDX_IO1_o_CylinderLow, 0xAA);
statusByte = AtapiReadPort1(chan, IDX_IO1_i_CylinderLow);
// Check if indentifier can be read back.
if (AtapiReadPort1(chan, IDX_IO1_i_CylinderLow) != 0xAA ||
statusByte == IDE_STATUS_WRONG) {
KdPrint2((PRINT_PREFIX "AtapiFindIsaController: Identifier read back from Master (%#x)\n",
statusByte));
statusByte = AtapiReadPort1(chan, IDX_IO2_AltStatus);
if (statusByte != IDE_STATUS_WRONG && (statusByte & IDE_STATUS_BUSY)) {
i = 0;
// Could be the TEAC in a thinkpad. Their dos driver puts it in a sleep-mode that
// warm boots don't clear.
do {
AtapiStallExecution(1000);
statusByte = AtapiReadPort1(chan, IDX_ATAPI_IO1_i_Status);
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: First access to status %#x\n",
statusByte));
} while ((statusByte & IDE_STATUS_BUSY) && ++i < 10);
if (retryCount-- && (!(statusByte & IDE_STATUS_BUSY))) {
goto retryIdentifier;
}
}
// Select slave.
SelectDrive(chan, 1);
statusByte = AtapiReadPort1(chan, IDX_IO2_AltStatus);
// See if slave is present.
AtapiWritePort1(chan, IDX_IO1_o_CylinderLow, 0xAA);
if (AtapiReadPort1(chan, IDX_IO1_i_CylinderLow) != 0xAA ||
statusByte == IDE_STATUS_WRONG) {
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: Identifier read back from Slave (%#x)\n",
statusByte));
goto not_found;
}
}
// Fill in the access array information only if default params are not in there.
if (preConfig == FALSE) {
// An adapter has been found request another call, only if we didn't get preconfigured info.
*Again = TRUE;
if (portBase) {
(*ConfigInfo->AccessRanges)[0].RangeStart = ScsiPortConvertUlongToPhysicalAddress(portBase);
} else {
(*ConfigInfo->AccessRanges)[0].RangeStart =
ScsiPortConvertUlongToPhysicalAddress(AdapterAddresses[*adapterCount - 1]);
}
(*ConfigInfo->AccessRanges)[0].RangeLength = ATA_IOSIZE;
(*ConfigInfo->AccessRanges)[0].RangeInMemory = FALSE;
if(BaseIoAddress2) {
if(hasPCI) {
(*ConfigInfo->AccessRanges)[1].RangeStart = ScsiPortConvertUlongToPhysicalAddress((ULONG)BaseIoAddress2);
(*ConfigInfo->AccessRanges)[1].RangeLength = ATA_ALTIOSIZE;
(*ConfigInfo->AccessRanges)[1].RangeInMemory = FALSE;
} else {
// NT4 and NT3.51 on ISA-only hardware definitly fail floppy.sys load
// when this range is claimed by other driver.
// However, floppy should use only 0x3f0-3f5,3f7
if((ULONG)BaseIoAddress2 >= 0x3f0 && (ULONG)BaseIoAddress2 <= 0x3f7) {
KdPrint2((PRINT_PREFIX "!!! Possible AltStatus vs Floppy IO range interference !!!\n"));
}
KdPrint2((PRINT_PREFIX "Do not expose to OS on old ISA\n"));
(*ConfigInfo->AccessRanges)[1].RangeStart = ScsiPortConvertUlongToPhysicalAddress(0);
(*ConfigInfo->AccessRanges)[1].RangeLength = 0;
}
}
// Indicate the interrupt level corresponding to this IO range.
if (irq) {
ConfigInfo->BusInterruptLevel = irq;
} else {
ConfigInfo->BusInterruptLevel = InterruptLevels[*adapterCount - 1];
}
if (ConfigInfo->AdapterInterfaceType == MicroChannel) {
ConfigInfo->InterruptMode = LevelSensitive;
} else {
ConfigInfo->InterruptMode = Latched;
}
}
ConfigInfo->NumberOfBuses = 1;
ConfigInfo->MaximumNumberOfTargets = IDE_MAX_LUN_PER_CHAN;
// Indicate maximum transfer length is 64k.
ConfigInfo->MaximumTransferLength = 0x10000;
deviceExtension->MaximumDmaTransferLength = ConfigInfo->MaximumTransferLength;
KdPrint2((PRINT_PREFIX "de %#x, Channel ???\n", deviceExtension));
//PrintNtConsole("de %#x, Channel %#x, nchan %#x\n",deviceExtension, channel, deviceExtension->NumberChannels);
KdPrint2((PRINT_PREFIX "chan = %#x\n", chan));
//PrintNtConsole("chan = %#x, c=%#x\n", chan, c);
/*
// should be already set up in AtapiSetupLunPtrs(chan, deviceExtension, 0);
chan->DeviceExtension = deviceExtension;
chan->lChannel = 0;
chan->lun[0] = &(deviceExtension->lun[0]);
chan->lun[1] = &(deviceExtension->lun[1]);*/
/* do extra channel-specific setups */
AtapiReadChipConfig(HwDeviceExtension, DEVNUM_NOT_SPECIFIED, 0);
AtapiChipInit(HwDeviceExtension, DEVNUM_NOT_SPECIFIED, 0);
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: Found IDE at %#x\n",
BaseIoAddress1));
// For Daytona, the atdisk driver gets the first shot at the
// primary and secondary controllers.
if (preConfig == FALSE) {
if (*adapterCount - 1 < 2) {
// Determine whether this driver is being initialized by the
// system or as a crash dump driver.
if (g_Dump) {
#ifndef UNIATA_CORE
deviceExtension->DriverMustPoll = TRUE;
#endif //UNIATA_CORE
} else {
deviceExtension->DriverMustPoll = FALSE;
}
} else {
//atapiOnly = FALSE;
}
} else {
//atapiOnly = FALSE;
deviceExtension->DriverMustPoll = FALSE;
}// preConfig check
// Save the Interrupe Mode for later use
deviceExtension->InterruptMode = ConfigInfo->InterruptMode;
deviceExtension->BusInterruptLevel = ConfigInfo->BusInterruptLevel;
deviceExtension->BusInterruptVector = ConfigInfo->BusInterruptVector;
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: look for devices\n"));
// Search for devices on this controller.
if (FindDevices(HwDeviceExtension,
0,
0 /* Channel */)) {
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: detected\n"));
// Claim primary or secondary ATA IO range.
if (portBase) {
switch (portBase) {
case IO_WD2:
ConfigInfo->AtdiskSecondaryClaimed = TRUE;
chan->PrimaryAddress = FALSE;
break;
case IO_WD1:
ConfigInfo->AtdiskPrimaryClaimed = TRUE;
chan->PrimaryAddress = TRUE;
break;
default:
break;
}
} else {
if (*adapterCount == 1) {
ConfigInfo->AtdiskPrimaryClaimed = TRUE;
chan->PrimaryAddress = TRUE;
} else if (*adapterCount == 2) {
ConfigInfo->AtdiskSecondaryClaimed = TRUE;
chan->PrimaryAddress = FALSE;
}
}
if(deviceExtension->AdapterInterfaceType == Isa) {
IsaCount++;
} else
if(deviceExtension->AdapterInterfaceType == MicroChannel) {
MCACount++;
}
ConfigInfo->NumberOfBuses++; // add virtual channel for communication port
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: return SP_RETURN_FOUND\n"));
return(SP_RETURN_FOUND);
} else {
not_found:
// No controller at this base address.
if(BaseIoAddress1) {
ScsiPortFreeDeviceBase(HwDeviceExtension,
(PCHAR)BaseIoAddress1);
BaseIoAddress1 = NULL;
}
if(BaseIoAddress2) {
ScsiPortFreeDeviceBase(HwDeviceExtension,
(PCHAR)BaseIoAddress2);
BaseIoAddress2 = NULL;
}
for(i=0; i<2; i++) {
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: cleanup AccessRanges %d\n", i));
(*ConfigInfo->AccessRanges)[i].RangeStart = ScsiPortConvertUlongToPhysicalAddress(0);
(*ConfigInfo->AccessRanges)[i].RangeLength = 0;
(*ConfigInfo->AccessRanges)[i].RangeInMemory = FALSE;
}
irq = 0;
portBase = 0;
}
#ifndef UNIATA_CORE
}
#else
} while(FALSE);
#endif //UNIATA_CORE
// The entire table has been searched and no adapters have been found.
// There is no need to call again and the device base can now be freed.
// Clear the adapter count for the next bus.
*Again = FALSE;
*(adapterCount) = 0;
KdPrint2((PRINT_PREFIX
"AtapiFindIsaController: return SP_RETURN_NOT_FOUND\n"));
UniataFreeLunExt(deviceExtension);
return(SP_RETURN_NOT_FOUND);
exit_error:
UniataFreeLunExt(deviceExtension);
return SP_RETURN_ERROR;
} // end AtapiFindIsaController()
/*
Do nothing, but parse ScsiPort ArgumentString and setup global variables.
*/
ULONG
NTAPI
AtapiReadArgumentString(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
)
{
#ifndef __REACTOS__
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
#endif
if (AtapiParseArgumentString(ArgumentString, "dump") == 1) {
KdPrint2((PRINT_PREFIX
"AtapiReadArgumentString: Crash dump\n"));
//atapiOnly = FALSE;
g_Dump = TRUE;
}
return(SP_RETURN_NOT_FOUND);
} // end AtapiReadArgumentString()
ULONG
NTAPI
UniataAnybodyHome(
IN PVOID HwDeviceExtension,
IN ULONG lChannel,
IN ULONG deviceNumber
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PHW_CHANNEL chan = &(deviceExtension->chan[lChannel]);
//ULONG ldev = GET_LDEV2(lChannel, deviceNumber, 0);
PHW_LU_EXTENSION LunExt = chan->lun[deviceNumber];
SATA_SSTATUS_REG SStatus;
UCHAR signatureLow;
UCHAR signatureHigh;
if(LunExt->DeviceFlags & DFLAGS_HIDDEN) {
KdPrint2((PRINT_PREFIX " hidden\n"));
UniataForgetDevice(LunExt);
return ATA_AT_HOME_NOBODY;
}
if(UniataIsSATARangeAvailable(deviceExtension, lChannel)) {
SStatus.Reg = UniataSataReadPort4(chan, IDX_SATA_SStatus, deviceNumber);
KdPrint2((PRINT_PREFIX "SStatus %x\n", SStatus.Reg));
if(SStatus.DET <= SStatus_DET_Dev_NoPhy) {
KdPrint2((PRINT_PREFIX " SATA DET <= SStatus_DET_Dev_NoPhy\n"));
return ATA_AT_HOME_NOBODY;
}
if(SStatus.SPD < SStatus_SPD_Gen1) {
KdPrint2((PRINT_PREFIX " SATA SPD < SStatus_SPD_Gen1\n"));
return ATA_AT_HOME_NOBODY;
}
if(SStatus.IPM == SStatus_IPM_NoDev) {
KdPrint2((PRINT_PREFIX " SATA IPN == SStatus_IPM_NoDev\n"));
return ATA_AT_HOME_NOBODY;
}
if(!(deviceExtension->HwFlags & UNIATA_AHCI)) {
// Select the device for legacy.
goto legacy_select;
}
} else {
legacy_select:
// Select the device.
SelectDrive(chan, deviceNumber);
AtapiStallExecution(5);
}
if((deviceExtension->HwFlags & UNIATA_AHCI) &&
UniataIsSATARangeAvailable(deviceExtension, lChannel)) {
KdPrint2((PRINT_PREFIX " AHCI check\n"));
ULONG SIG = UniataAhciReadChannelPort4(chan, IDX_AHCI_P_SIG);
signatureLow = (UCHAR)(SIG >> 16);
signatureHigh = (UCHAR)(SIG >> 24);
} else {
signatureLow = AtapiReadPort1(chan, IDX_IO1_i_CylinderLow);
signatureHigh = AtapiReadPort1(chan, IDX_IO1_i_CylinderHigh);
}
if (signatureLow == ATAPI_MAGIC_LSB && signatureHigh == ATAPI_MAGIC_MSB) {
KdPrint2((PRINT_PREFIX " ATAPI at home\n"));
return ATA_AT_HOME_ATAPI;
}
if(deviceExtension->HwFlags & UNIATA_AHCI) {
KdPrint2((PRINT_PREFIX " AHCI HDD at home\n"));
return ATA_AT_HOME_HDD;
}
if(g_opt_VirtualMachine > VM_NONE /*== VM_BOCHS ||
g_opt_VirtualMachine == VM_VBOX*/) {
GetStatus(chan, signatureLow);
if(!signatureLow) {
KdPrint2((PRINT_PREFIX " 0-status VM - not present\n"));
UniataForgetDevice(LunExt);
return ATA_AT_HOME_NOBODY;
}
}
AtapiStallExecution(10);
AtapiWritePort1(chan, IDX_IO1_o_BlockNumber, 0x55);
AtapiWritePort1(chan, IDX_IO1_o_BlockNumber, 0x55);
AtapiStallExecution(5);
signatureLow = AtapiReadPort1(chan, IDX_IO1_i_BlockNumber);
if(signatureLow != 0x55) {
if(signatureLow == 0xff || signatureLow == 0) {
KdPrint2((PRINT_PREFIX " nobody home! %#x != 0x55\n", signatureLow));
UniataForgetDevice(LunExt);
return ATA_AT_HOME_NOBODY;
}
// another chance
signatureLow = AtapiReadPort1(chan, IDX_ATAPI_IO1_o_ByteCountHigh);
signatureLow += 2;
AtapiWritePort1(chan, IDX_ATAPI_IO1_o_ByteCountHigh, signatureLow);
AtapiStallExecution(5);
signatureHigh = AtapiReadPort1(chan, IDX_ATAPI_IO1_o_ByteCountHigh);
if(signatureLow != signatureHigh) {
KdPrint2((PRINT_PREFIX " nobody home! last chance failed %#x != %#x\n", signatureLow, signatureHigh));
UniataForgetDevice(LunExt);
return ATA_AT_HOME_NOBODY;
}
return ATA_AT_HOME_XXX;
}
AtapiWritePort1(chan, IDX_IO1_o_BlockNumber, 0xAA);
AtapiWritePort1(chan, IDX_IO1_o_BlockNumber, 0xAA);
AtapiStallExecution(5);
signatureLow = AtapiReadPort1(chan, IDX_IO1_i_BlockNumber);
if(signatureLow != 0xAA) {
KdPrint2((PRINT_PREFIX " nobody home! %#x != 0xAA\n", signatureLow));
UniataForgetDevice(LunExt);
return ATA_AT_HOME_NOBODY;
}
KdPrint2((PRINT_PREFIX " HDD at home\n"));
return ATA_AT_HOME_HDD;
} // end UniataAnybodyHome()
ULONG
NTAPI
CheckDevice(
IN PVOID HwDeviceExtension,
IN ULONG lChannel,
IN ULONG deviceNumber,
IN BOOLEAN ResetDev
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PHW_CHANNEL chan = &(deviceExtension->chan[lChannel]);
//ULONG ldev = GET_LDEV2(lChannel, deviceNumber, 0);
PHW_LU_EXTENSION LunExt;
UCHAR signatureLow,
signatureHigh;
UCHAR statusByte;
ULONG RetVal=0;
ULONG waitCount = g_opt_WaitBusyResetCount;
ULONG at_home = 0;
KdPrint2((PRINT_PREFIX "CheckDevice: Device %#x\n",
deviceNumber));
if(deviceNumber >= chan->NumberLuns) {
return 0;
}
if(deviceExtension->HwFlags & UNIATA_AHCI) {
if(!(at_home = UniataAnybodyHome(HwDeviceExtension, lChannel, deviceNumber))) {
return 0;
}
}
LunExt = chan->lun[deviceNumber];
if(ResetDev) {
LunExt->PowerState = 0;
}
if((deviceExtension->HwFlags & UNIATA_SATA) &&
!UniataIsSATARangeAvailable(deviceExtension, lChannel) &&
deviceNumber) {
KdPrint2((PRINT_PREFIX " SATA w/o i/o registers, check slave presence\n"));
SelectDrive(chan, deviceNumber & 0x01);
statusByte = AtapiReadPort1(chan, IDX_ATAPI_IO1_i_DriveSelect);
KdPrint2((PRINT_PREFIX " DriveSelect: %#x\n", statusByte));
if((statusByte & IDE_DRIVE_MASK) != IDE_DRIVE_SELECT_2) {
KdPrint2((PRINT_PREFIX "CheckDevice: (no dev)\n"));
UniataForgetDevice(LunExt);
return 0;
}
}
if(ResetDev && (deviceExtension->HwFlags & UNIATA_AHCI)) {
KdPrint2((PRINT_PREFIX "CheckDevice: reset AHCI dev\n"));
if(UniataAhciSoftReset(HwDeviceExtension, chan->lChannel, deviceNumber) == (ULONG)(-1)) {
KdPrint2((PRINT_PREFIX "CheckDevice: (no dev)\n"));
UniataForgetDevice(LunExt);
return 0;
}
} else
if(ResetDev) {
KdPrint2((PRINT_PREFIX "CheckDevice: reset dev\n"));
// Reset device
AtapiSoftReset(chan, deviceNumber);
if(!(at_home = UniataAnybodyHome(HwDeviceExtension, lChannel, deviceNumber))) {
//KdPrint2((PRINT_PREFIX "CheckDevice: nobody at home 1\n"));
return 0;
}
statusByte = WaitOnBusy(chan);
if((statusByte | IDE_STATUS_BUSY) == IDE_STATUS_WRONG) {
KdPrint2((PRINT_PREFIX
"CheckDevice: bad status %x\n", statusByte));
} else
if(statusByte != IDE_STATUS_WRONG && (statusByte & IDE_STATUS_BUSY)) {
// Perform hard-reset.
KdPrint2((PRINT_PREFIX
"CheckDevice: BUSY\n"));
AtapiHardReset(chan, FALSE, 500 * 1000);
/*
AtapiWritePort1(chan, IDX_IO2_o_Control, IDE_DC_RESET_CONTROLLER );
chan->last_devsel = -1;
AtapiStallExecution(500 * 1000);
AtapiWritePort1(chan, IDX_IO2_o_Control, IDE_DC_REENABLE_CONTROLLER);
*/
SelectDrive(chan, deviceNumber & 0x01);
do {
// Wait for Busy to drop.
AtapiStallExecution(100);
GetStatus(chan, statusByte);
} while ((statusByte & IDE_STATUS_BUSY) && waitCount--);
GetBaseStatus(chan, statusByte);
KdPrint2((PRINT_PREFIX
"CheckDevice: status after hard reset %x\n", statusByte));
}
if((statusByte | IDE_STATUS_BUSY) == IDE_STATUS_WRONG) {
KdPrint2((PRINT_PREFIX
"CheckDevice: no dev ?\n"));
UniataForgetDevice(LunExt);
return 0;
} else
if(UniataIsSATARangeAvailable(deviceExtension, lChannel)) {
//if(deviceExtension->HwFlags & UNIATA_SATA) {
KdPrint2((PRINT_PREFIX
"CheckDevice: try enable SATA Phy\n"));
statusByte = UniataSataPhyEnable(HwDeviceExtension, lChannel, deviceNumber);
if(statusByte == IDE_STATUS_WRONG) {
KdPrint2((PRINT_PREFIX "CheckDevice: status %#x (no dev)\n", statusByte));
UniataForgetDevice(LunExt);
return 0;
}
}
}
if(deviceExtension->HwFlags & UNIATA_AHCI) {
RetVal = LunExt->DeviceFlags;
signatureLow = signatureHigh = 0; // make GCC happy
} else {
// Select the device.
SelectDrive(chan, deviceNumber);
if(!(at_home = UniataAnybodyHome(HwDeviceExtension, lChannel, deviceNumber))) {
//KdPrint2((PRINT_PREFIX "CheckDevice: nobody at home 2\n"));
return 0;
}
statusByte = WaitOnBaseBusyLong(chan);
GetBaseStatus(chan, statusByte);
if(deviceExtension->HwFlags & UNIATA_SATA) {
UniataSataClearErr(HwDeviceExtension, lChannel, UNIATA_SATA_IGNORE_CONNECT, deviceNumber);
}
KdPrint2((PRINT_PREFIX "CheckDevice: status %#x\n", statusByte));
if(((statusByte | IDE_STATUS_BUSY) == IDE_STATUS_WRONG) ||
(statusByte & IDE_STATUS_BUSY)) {
KdPrint2((PRINT_PREFIX "CheckDevice: busy => return\n"));
UniataForgetDevice(LunExt);
return 0;
}
signatureLow = AtapiReadPort1(chan, IDX_IO1_i_CylinderLow);
signatureHigh = AtapiReadPort1(chan, IDX_IO1_i_CylinderHigh);
}
// set default costs
LunExt->RwSwitchCost = REORDER_COST_SWITCH_RW_HDD;
LunExt->RwSwitchMCost = REORDER_MCOST_SWITCH_RW_HDD;
LunExt->SeekBackMCost = REORDER_MCOST_SEEK_BACK_HDD;
LunExt->AtapiReadyWaitDelay = 0;
if(deviceExtension->HwFlags & UNIATA_AHCI) {
if(RetVal & DFLAGS_DEVICE_PRESENT) {
if(IssueIdentify(HwDeviceExtension,
deviceNumber,
lChannel,
(RetVal & DFLAGS_ATAPI_DEVICE) ? IDE_COMMAND_ATAPI_IDENTIFY : IDE_COMMAND_IDENTIFY,
FALSE)) {
// OK
KdPrint2((PRINT_PREFIX "CheckDevice: detected AHCI Device %#x\n",
deviceNumber));
} else {
//RetVal &= ~DFLAGS_ATAPI_DEVICE;
//LunExt->DeviceFlags &= ~DFLAGS_ATAPI_DEVICE;
UniataForgetDevice(LunExt);
RetVal = 0;
}
}
} else
if (signatureLow == ATAPI_MAGIC_LSB && signatureHigh == ATAPI_MAGIC_MSB) {
KdPrint2((PRINT_PREFIX "CheckDevice: ATAPI signature found\n"));
// ATAPI signature found.
// Issue the ATAPI identify command if this
// is not for the crash dump utility.
try_atapi:
if (!g_Dump) {
// Issue ATAPI packet identify command.
if (IssueIdentify(HwDeviceExtension,
deviceNumber,
lChannel,
IDE_COMMAND_ATAPI_IDENTIFY, FALSE)) {
// Indicate ATAPI device.
KdPrint2((PRINT_PREFIX "CheckDevice: Device %#x is ATAPI\n",
deviceNumber));
RetVal = DFLAGS_DEVICE_PRESENT | DFLAGS_ATAPI_DEVICE;
LunExt->DeviceFlags |= (DFLAGS_DEVICE_PRESENT | DFLAGS_ATAPI_DEVICE);
// some ATAPI devices doesn't work with DPC on CMD-649
// and probably some other controllers
if(deviceExtension->HwFlags & UNIATA_NO_DPC_ATAPI) {
/* CMD 649, ROSB SWK33, ICH4 */
KdPrint2((PRINT_PREFIX "CheckDevice: UNIATA_NO_DPC_ATAPI\n"));
deviceExtension->UseDpc = FALSE;
}
GetStatus(chan, statusByte);
if (statusByte & IDE_STATUS_ERROR) {
AtapiSoftReset(chan, deviceNumber);
}
} else {
forget_device:
// Indicate no working device.
KdPrint2((PRINT_PREFIX "CheckDevice: Device %#x not responding\n",
deviceNumber));
UniataForgetDevice(LunExt);
RetVal = 0;
}
GetBaseStatus(chan, statusByte);
}
} else {
KdPrint2((PRINT_PREFIX "CheckDevice: IDE device check\n"));
// Issue IDE Identify. If an Atapi device is actually present, the signature
// will be asserted, and the drive will be recognized as such.
if(deviceExtension->DWordIO) {
KdPrint2((PRINT_PREFIX " try 32bit IO\n"));
LunExt->DeviceFlags |= DFLAGS_DWORDIO_ENABLED;
}
if (IssueIdentify(HwDeviceExtension,
deviceNumber,
lChannel,
IDE_COMMAND_IDENTIFY, FALSE)) {
// IDE drive found.
KdPrint2((PRINT_PREFIX "CheckDevice: Device %#x is IDE\n",
deviceNumber));
// Indicate IDE - not ATAPI device.
RetVal = DFLAGS_DEVICE_PRESENT;
LunExt->DeviceFlags |= DFLAGS_DEVICE_PRESENT;
LunExt->DeviceFlags &= ~DFLAGS_ATAPI_DEVICE;
} else
if(g_opt_VirtualMachine <= VM_NONE) {
// This can be ATAPI on broken hardware
GetBaseStatus(chan, statusByte);
if(!at_home && UniataAnybodyHome(HwDeviceExtension, lChannel, deviceNumber)) {
KdPrint2((PRINT_PREFIX "CheckDevice: nobody at home post IDE\n"));
goto forget_device;
}
KdPrint2((PRINT_PREFIX "CheckDevice: try ATAPI %#x, status %#x\n",
deviceNumber, statusByte));
goto try_atapi;
} else {
KdPrint2((PRINT_PREFIX "CheckDevice: VM Device %#x not present\n",
deviceNumber));
}
GetBaseStatus(chan, statusByte);
}
KdPrint2((PRINT_PREFIX "CheckDevice: check status: %sfound\n", RetVal ? "" : "not "));
return RetVal;
} // end CheckDevice()
/*++
Routine Description:
This routine is called from AtapiFindXxxController to identify
devices attached to an IDE controller.
Arguments:
HwDeviceExtension - HBA miniport driver's adapter data storage
AtapiOnly - Indicates that routine should return TRUE only if
an ATAPI device is attached to the controller.
Return Value:
TRUE - True if devices found.
--*/
BOOLEAN
NTAPI
FindDevices(
IN PVOID HwDeviceExtension,
IN ULONG Flags,
IN ULONG Channel
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PHW_CHANNEL chan = &(deviceExtension->chan[Channel]);
PHW_LU_EXTENSION LunExt;
BOOLEAN deviceResponded = FALSE,
skipSetParameters = FALSE;
ULONG waitCount = 10000;
//ULONG deviceNumber;
ULONG i;
UCHAR statusByte;
ULONG max_ldev;
BOOLEAN AtapiOnly = FALSE;
KdPrint2((PRINT_PREFIX "FindDevices:\n"));
// Disable interrupts
AtapiDisableInterrupts(deviceExtension, Channel);
// AtapiWritePort1(chan, IDX_IO2_o_Control,IDE_DC_DISABLE_INTERRUPTS | IDE_DC_A_4BIT );
// Clear expecting interrupt flag and current SRB field.
UniataExpectChannelInterrupt(chan, FALSE);
// chan->CurrentSrb = NULL;
// max_ldev = (chan->ChannelCtrlFlags & CTRFLAGS_NO_SLAVE) ? 1 : IDE_MAX_LUN_PER_CHAN;
max_ldev = (chan->ChannelCtrlFlags & CTRFLAGS_NO_SLAVE) ? 1 : deviceExtension->NumberLuns;
KdPrint2((PRINT_PREFIX " max_ldev %d\n", max_ldev));
// Search for devices.
for (i = 0; i < max_ldev; i++) {
//AtapiDisableInterrupts(deviceExtension, Channel);
if(Flags & UNIATA_FIND_DEV_UNHIDE) {
chan->lun[i]->DeviceFlags &= ~DFLAGS_HIDDEN;
}
deviceResponded |=
(CheckDevice(HwDeviceExtension, Channel, i, TRUE) != 0);
//AtapiEnableInterrupts(deviceExtension, Channel);
}
if(chan->DeviceExtension->HwFlags & UNIATA_AHCI) {
AtapiEnableInterrupts(deviceExtension, Channel);
KdPrint2((PRINT_PREFIX
"FindDevices: returning %d (AHCI)\n",
deviceResponded));
return deviceResponded;
}
for (i = 0; i < max_ldev; i++) {
LunExt = chan->lun[i];
if (( LunExt->DeviceFlags & DFLAGS_DEVICE_PRESENT) &&
!(LunExt->DeviceFlags & DFLAGS_LBA_ENABLED) &&
!(LunExt->DeviceFlags & DFLAGS_ATAPI_DEVICE) && deviceResponded) {
// This hideous hack is to deal with ESDI devices that return
// garbage geometry in the IDENTIFY data.
// This is ONLY for the crashdump environment as
// these are ESDI devices.
if (LunExt->IdentifyData.SectorsPerTrack == 0x35 &&
LunExt->IdentifyData.NumberOfHeads == 0x07) {
KdPrint2((PRINT_PREFIX "FindDevices: Found nasty Compaq ESDI!\n"));
// Change these values to something reasonable.
LunExt->IdentifyData.SectorsPerTrack = 0x34;
LunExt->IdentifyData.NumberOfHeads = 0x0E;
}
if (LunExt->IdentifyData.SectorsPerTrack == 0x35 &&
LunExt->IdentifyData.NumberOfHeads == 0x0F) {
KdPrint2((PRINT_PREFIX "FindDevices: Found nasty Compaq ESDI!\n"));
// Change these values to something reasonable.
LunExt->IdentifyData.SectorsPerTrack = 0x34;
LunExt->IdentifyData.NumberOfHeads = 0x0F;
}
if (LunExt->IdentifyData.SectorsPerTrack == 0x36 &&
LunExt->IdentifyData.NumberOfHeads == 0x07) {
KdPrint2((PRINT_PREFIX "FindDevices: Found nasty UltraStor ESDI!\n"));
// Change these values to something reasonable.
LunExt->IdentifyData.SectorsPerTrack = 0x3F;
LunExt->IdentifyData.NumberOfHeads = 0x10;
skipSetParameters = TRUE;
}
if (skipSetParameters)
continue;
statusByte = WaitOnBusy(chan);
// Select the device.
SelectDrive(chan, i & 0x01);
GetStatus(chan, statusByte);
if (statusByte & IDE_STATUS_ERROR) {
// Reset the device.
KdPrint2((PRINT_PREFIX
"FindDevices: Resetting controller before SetDriveParameters.\n"));
AtapiHardReset(chan, FALSE, 500 * 1000);
/*
AtapiWritePort1(chan, IDX_IO2_o_Control, IDE_DC_RESET_CONTROLLER );
chan->last_devsel = -1;
AtapiStallExecution(500 * 1000);
AtapiWritePort1(chan, IDX_IO2_o_Control, IDE_DC_REENABLE_CONTROLLER);
*/
SelectDrive(chan, i & 0x01);
do {
// Wait for Busy to drop.
AtapiStallExecution(100);
GetStatus(chan, statusByte);
} while ((statusByte & IDE_STATUS_BUSY) && waitCount--);
}
statusByte = WaitOnBusy(chan);
KdPrint2((PRINT_PREFIX
"FindDevices: Status before SetDriveParameters: (%#x) (%#x)\n",
statusByte,
AtapiReadPort1(chan, IDX_IO1_i_DriveSelect)));
GetBaseStatus(chan, statusByte);
// Use the IDENTIFY data to set drive parameters.
if (!SetDriveParameters(HwDeviceExtension,i,Channel)) {
KdPrint2((PRINT_PREFIX
"FindDevices: Set drive parameters for device %d failed\n",
i));
// Don't use this device as writes could cause corruption.
LunExt->DeviceFlags &= ~DFLAGS_DEVICE_PRESENT;
UniataForgetDevice(LunExt);
continue;
}
if (LunExt->DeviceFlags & DFLAGS_REMOVABLE_DRIVE) {
// Pick up ALL IDE removable drives that conform to Yosemite V0.2...
AtapiOnly = FALSE;
}
// Indicate that a device was found.
if (!AtapiOnly) {
deviceResponded = TRUE;
}
}
}
/* // Reset the controller. This is a feeble attempt to leave the ESDI
// controllers in a state that ATDISK driver will recognize them.
// The problem in ATDISK has to do with timings as it is not reproducible
// in debug. The reset should restore the controller to its poweron state
// and give the system enough time to settle.
if (!deviceResponded) {
AtapiWritePort1(chan, IDX_IO2_o_Control,IDE_DC_RESET_CONTROLLER );
AtapiStallExecution(50 * 1000);
AtapiWritePort1(chan, IDX_IO2_o_Control,IDE_DC_REENABLE_CONTROLLER);
}
*/
if(deviceResponded) {
for (i = 0; i < max_ldev; i++) {
LunExt = chan->lun[i];
KdPrint2((PRINT_PREFIX
"FindDevices: select %d dev to clear INTR\n", i));
SelectDrive(chan, i);
GetBaseStatus(chan, statusByte);
KdPrint2((PRINT_PREFIX
"FindDevices: statusByte=%#x\n", statusByte));
}
for (i = 0; i < max_ldev; i++) {
LunExt = chan->lun[i];
if(LunExt->DeviceFlags & DFLAGS_DEVICE_PRESENT) {
// Make sure some device (master is preferred) is selected on exit.
KdPrint2((PRINT_PREFIX
"FindDevices: select %d dev on exit\n", i));
SelectDrive(chan, i);
break;
}
}
}
GetBaseStatus(chan, statusByte);
// Enable interrupts
AtapiEnableInterrupts(deviceExtension, Channel);
// AtapiWritePort1(chan, IDX_IO2_o_Control, IDE_DC_A_4BIT );
GetBaseStatus(chan, statusByte);
KdPrint2((PRINT_PREFIX
"FindDevices: returning %d\n",
deviceResponded));
return deviceResponded;
} // end FindDevices()
Reference in a new issue View git blame Copy permalink