Intravision/reactos
1
0
Fork 0
mirror of https://github.com/reactos/reactos.git synced 2024-07-01 02:10:07 +00:00
Code Issues Packages Projects Releases Wiki Activity
reactos/drivers/storage/ide/uniata/bsmaster.h
Victor Perevertkin 34593d933b
[FORMATTING][NTOS][HAL][DRIVERS][SDK] Fix trailing spaces
2021-06-11 15:33:08 +03:00

1916 lines
60 KiB
C
Raw Blame History

/*++
Copyright (c) 2002-2018 Alexandr A. Telyatnikov (Alter)
Module Name:
bsmaster.h
Abstract:
This file contains DMA/UltraDMA and IDE BusMastering related definitions,
internal structures and useful macros
Author:
Alexander A. Telyatnikov (Alter)
Environment:
kernel mode only
Notes:
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Revision History:
Code was created by
Alter, Copyright (c) 2002-2015
Some definitions were taken from FreeBSD 4.3-9.2 ATA driver by
Søren Schmidt, Copyright (c) 1998-2014
Licence:
GPLv2
--*/
#ifndef __IDE_BUSMASTER_H__
#define __IDE_BUSMASTER_H__
#include "config.h"
#include "tools.h"
//
//
//
#define ATA_IDLE 0x0
#define ATA_IMMEDIATE 0x1
#define ATA_WAIT_INTR 0x2
#define ATA_WAIT_READY 0x3
#define ATA_ACTIVE 0x4
#define ATA_ACTIVE_ATA 0x5
#define ATA_ACTIVE_ATAPI 0x6
#define ATA_REINITING 0x7
#define ATA_WAIT_BASE_READY 0x8
#define ATA_WAIT_IDLE 0x9
#include "bm_devs_decl.h"
#include "uata_ctl.h"
#pragma pack(push, 8)
#define MAX_RETRIES 6
#define RETRY_UDMA2 1
#define RETRY_WDMA 2
#define RETRY_PIO 3
#define IO_WD1 0x1F0 /* Primary Fixed Disk Controller */
#define IO_WD2 0x170 /* Secondary Fixed Disk Controller */
#define IP_PC98_BANK 0x432
#define IO_FLOPPY_INT 0x3F6 /* AltStatus inside Floppy I/O range */
#define PCI_ADDRESS_IOMASK 0xfffffff0
#define ATA_BM_OFFSET1 0x08
#define ATA_IOSIZE 0x08
#define ATA_ALTOFFSET 0x206 /* alternate registers offset */
#define ATA_PCCARD_ALTOFFSET 0x0e /* do for PCCARD devices */
#define ATA_ALTIOSIZE 0x01 /* alternate registers size */
#define ATA_BMIOSIZE 0x20
#define ATA_PC98_BANKIOSIZE 0x01
//#define ATA_MAX_LBA28 DEF_U64(0x0fffffff)
// Hitachi 1 Tb HDD didn't allow LBA28 with BCount > 1 beyond this LBA
#define ATA_MAX_IOLBA28 DEF_U64(0x0fffff80)
#define ATA_MAX_LBA28 DEF_U64(0x0fffffff)
#define ATA_MAX_IOLBA32 DEF_U64(0xffffff80)
#define ATA_MAX_LBA32 DEF_U64(0xffffffff)
#define ATA_DMA_ENTRIES 256 /* PAGESIZE/2/sizeof(BM_DMA_ENTRY)*/
#define ATA_DMA_EOT 0x80000000
#define DEV_BSIZE 512
#define ATAPI_MAGIC_LSB 0x14
#define ATAPI_MAGIC_MSB 0xeb
#define AHCI_MAX_PORT 32
#define SATA_MAX_PM_UNITS 16
typedef struct _BUSMASTER_CTX {
PBUSMASTER_CONTROLLER_INFORMATION* BMListPtr;
ULONG* BMListLen;
} BUSMASTER_CTX, *PBUSMASTER_CTX;
#define PCI_DEV_CLASS_STORAGE 0x01
#define PCI_DEV_SUBCLASS_IDE 0x01
#define PCI_DEV_SUBCLASS_RAID 0x04
#define PCI_DEV_SUBCLASS_ATA 0x05
#define PCI_DEV_SUBCLASS_SATA 0x06
#define PCI_DEV_PROGIF_AHCI_1_0 0x01
#pragma pack(push, 1)
/* structure for holding DMA address data */
typedef struct BM_DMA_ENTRY {
ULONG base;
ULONG count;
} BM_DMA_ENTRY, *PBM_DMA_ENTRY;
typedef struct _IDE_BUSMASTER_REGISTERS {
UCHAR Command;
UCHAR DeviceSpecific0;
UCHAR Status;
UCHAR DeviceSpecific1;
ULONG PRD_Table;
} IDE_BUSMASTER_REGISTERS, *PIDE_BUSMASTER_REGISTERS;
#define BM_STATUS_ACTIVE 0x01
#define BM_STATUS_ERR 0x02
#define BM_STATUS_INTR 0x04
#define BM_STATUS_MASK 0x07
#define BM_STATUS_DRIVE_0_DMA 0x20
#define BM_STATUS_DRIVE_1_DMA 0x40
#define BM_STATUS_SIMPLEX_ONLY 0x80
#define BM_COMMAND_START_STOP 0x01
/*#define BM_COMMAND_WRITE 0x08
#define BM_COMMAND_READ 0x00*/
#define BM_COMMAND_WRITE 0x00
#define BM_COMMAND_READ 0x08
#define BM_DS0_SII_DMA_ENABLE (1 << 0) /* DMA run switch */
#define BM_DS0_SII_IRQ (1 << 3) /* ??? */
#define BM_DS0_SII_DMA_SATA_IRQ (1 << 4) /* OR of all SATA IRQs */
#define BM_DS0_SII_DMA_ERROR (1 << 17) /* PCI bus error */
#define BM_DS0_SII_DMA_COMPLETE (1 << 18) /* cmd complete / IRQ pending */
#define IDX_BM_IO (IDX_IO2_o+IDX_IO2_o_SZ)
//#define IDX_BM_IO_SZ sizeof(IDE_BUSMASTER_REGISTERS)
#define IDX_BM_IO_SZ 5
#define IDX_BM_Command (FIELD_OFFSET(IDE_BUSMASTER_REGISTERS, Command )+IDX_BM_IO)
#define IDX_BM_DeviceSpecific0 (FIELD_OFFSET(IDE_BUSMASTER_REGISTERS, DeviceSpecific0)+IDX_BM_IO)
#define IDX_BM_Status (FIELD_OFFSET(IDE_BUSMASTER_REGISTERS, Status )+IDX_BM_IO)
#define IDX_BM_DeviceSpecific1 (FIELD_OFFSET(IDE_BUSMASTER_REGISTERS, DeviceSpecific1)+IDX_BM_IO)
#define IDX_BM_PRD_Table (FIELD_OFFSET(IDE_BUSMASTER_REGISTERS, PRD_Table )+IDX_BM_IO)
typedef struct _IDE_AHCI_REGISTERS {
// HBA Capabilities
struct {
ULONG NOP:5; // number of ports
ULONG SXS:1; // Supports External SATA
ULONG EMS:1; // Enclosure Management Supported
ULONG CCCS:1; // Command Completion Coalescing Supported
ULONG NCS:5; // number of command slots
ULONG PSC:1; // partial state capable
ULONG SSC:1; // slumber state capable
ULONG PMD:1; // PIO multiple DRQ block
ULONG FBSS:1; // FIS-based Switching Supported
ULONG SPM:1; // port multiplier
ULONG SAM:1; // AHCI mode only
ULONG SNZO:1; // non-zero DMA offset
ULONG ISS:4; // interface speed
ULONG SCLO:1; // command list override
ULONG SAL:1; // activity LED
ULONG SALP:1; // aggressive link power management
ULONG SSS:1; // staggered spin-up
ULONG SIS:1; // interlock switch
ULONG SSNTF:1; // Supports SNotification Register
ULONG SNCQ:1; // native command queue
ULONG S64A:1; // 64bit addr
} CAP;
#define AHCI_CAP_NOP_MASK 0x0000001f
#define AHCI_CAP_CCC 0x00000080
#define AHCI_CAP_NCS_MASK 0x00001f00
#define AHCI_CAP_PMD 0x00008000
#define AHCI_CAP_SPM 0x00020000
#define AHCI_CAP_SAM 0x00040000
#define AHCI_CAP_ISS_MASK 0x00f00000
#define AHCI_CAP_SCLO 0x01000000
#define AHCI_CAP_SNTF 0x20000000
#define AHCI_CAP_NCQ 0x40000000
#define AHCI_CAP_S64A 0x80000000
// Global HBA Control
struct {
ULONG HR:1; // HBA Reset
ULONG IE:1; // interrupt enable
ULONG Reserved2_30:1;
ULONG AE:1; // AHCI enable
} GHC;
#define AHCI_GHC 0x04
#define AHCI_GHC_HR 0x00000001
#define AHCI_GHC_IE 0x00000002
#define AHCI_GHC_AE 0x80000000
// Interrupt status (bit mask)
ULONG IS; // 0x08
// Ports implemented (bit mask)
ULONG PI; // 0x0c
// AHCI Version
ULONG VS; // 0x10
ULONG CCC_CTL; // 0x14
ULONG CCC_PORTS; // 0x18
ULONG EM_LOC; // 0x1c
ULONG EM_CTL; // 0x20
// Extended HBA Capabilities
struct { // 0x24
ULONG BOH:1; // BIOS/OS Handoff
ULONG NVMP:1; // NVMHCI Present
ULONG APST:1; // Automatic Partial to Slumber Transitions
ULONG Reserved:29;
} CAP2;
#define AHCI_CAP2_BOH 0x00000001
#define AHCI_CAP2_NVMP 0x00000002
#define AHCI_CAP2_APST 0x00000004
// BIOS/OS Handoff Control and Status
struct { // 0x28
ULONG BB:1; // BIOS Busy
ULONG OOC:1; // OS Ownership Change
ULONG SOOE:1; // SMI on OS Ownership Change Enable
ULONG OOS:1; // OS Owned Semaphore
ULONG BOS:1; // BIOS Owned Semaphore
ULONG Reserved:27;
} BOHC;
#define AHCI_BOHC_BB 0x00000001
#define AHCI_BOHC_OOC 0x00000002
#define AHCI_BOHC_SOOE 0x00000004
#define AHCI_BOHC_OOS 0x00000008
#define AHCI_BOHC_BOS 0x00000010
UCHAR Reserved2[0x74];
UCHAR VendorSpec[0x60];
} IDE_AHCI_REGISTERS, *PIDE_AHCI_REGISTERS;
#define IDX_AHCI_CAP (FIELD_OFFSET(IDE_AHCI_REGISTERS, CAP))
#define IDX_AHCI_GHC (FIELD_OFFSET(IDE_AHCI_REGISTERS, GHC))
#define IDX_AHCI_IS (FIELD_OFFSET(IDE_AHCI_REGISTERS, IS))
#define IDX_AHCI_VS (FIELD_OFFSET(IDE_AHCI_REGISTERS, VS))
#define IDX_AHCI_PI (FIELD_OFFSET(IDE_AHCI_REGISTERS, PI))
#define IDX_AHCI_CAP2 (FIELD_OFFSET(IDE_AHCI_REGISTERS, CAP2))
#define IDX_AHCI_BOHC (FIELD_OFFSET(IDE_AHCI_REGISTERS, BOHC))
typedef union _SATA_SSTATUS_REG {
struct {
ULONG DET:4; // Device Detection
#define SStatus_DET_NoDev 0x00
#define SStatus_DET_Dev_NoPhy 0x01
#define SStatus_DET_Dev_Ok 0x03
#define SStatus_DET_Offline 0x04
ULONG SPD:4; // Current Interface Speed
#define SStatus_SPD_NoDev 0x00
#define SStatus_SPD_Gen1 0x01
#define SStatus_SPD_Gen2 0x02
#define SStatus_SPD_Gen3 0x03
ULONG IPM:4; // Interface Power Management
#define SStatus_IPM_NoDev 0x00
#define SStatus_IPM_Active 0x01
#define SStatus_IPM_Partial 0x02
#define SStatus_IPM_Slumber 0x06
ULONG Reserved:20;
};
ULONG Reg;
} SATA_SSTATUS_REG, *PSATA_SSTATUS_REG;
#define ATA_SS_DET_MASK 0x0000000f
#define ATA_SS_DET_NO_DEVICE 0x00000000
#define ATA_SS_DET_DEV_PRESENT 0x00000001
#define ATA_SS_DET_PHY_ONLINE 0x00000003
#define ATA_SS_DET_PHY_OFFLINE 0x00000004
#define ATA_SS_SPD_MASK 0x000000f0
#define ATA_SS_SPD_NO_SPEED 0x00000000
#define ATA_SS_SPD_GEN1 0x00000010
#define ATA_SS_SPD_GEN2 0x00000020
#define ATA_SS_IPM_MASK 0x00000f00
#define ATA_SS_IPM_NO_DEVICE 0x00000000
#define ATA_SS_IPM_ACTIVE 0x00000100
#define ATA_SS_IPM_PARTIAL 0x00000200
#define ATA_SS_IPM_SLUMBER 0x00000600
typedef union _SATA_SCONTROL_REG {
struct {
ULONG DET:4; // Device Detection Init
#define SControl_DET_DoNothing 0x00
#define SControl_DET_Idle 0x00
#define SControl_DET_Init 0x01
#define SControl_DET_Disable 0x04
ULONG SPD:4; // Speed Allowed
#define SControl_SPD_NoRestrict 0x00
#define SControl_SPD_LimGen1 0x01
#define SControl_SPD_LimGen2 0x02
#define SControl_SPD_LimGen3 0x03
ULONG IPM:4; // Interface Power Management Transitions Allowed
#define SControl_IPM_NoRestrict 0x00
#define SControl_IPM_NoPartial 0x01
#define SControl_IPM_NoSlumber 0x02
#define SControl_IPM_NoPartialSlumber 0x03
ULONG SPM:4; // Select Power Management, unused by AHCI
ULONG PMP:4; // Port Multiplier Port, unused by AHCI
ULONG Reserved:12;
};
ULONG Reg;
} SATA_SCONTROL_REG, *PSATA_SCONTROL_REG;
#define ATA_SC_DET_MASK 0x0000000f
#define ATA_SC_DET_IDLE 0x00000000
#define ATA_SC_DET_RESET 0x00000001
#define ATA_SC_DET_DISABLE 0x00000004
#define ATA_SC_SPD_MASK 0x000000f0
#define ATA_SC_SPD_NO_SPEED 0x00000000
#define ATA_SC_SPD_SPEED_GEN1 0x00000010
#define ATA_SC_SPD_SPEED_GEN2 0x00000020
#define ATA_SC_SPD_SPEED_GEN3 0x00000040
#define ATA_SC_IPM_MASK 0x00000f00
#define ATA_SC_IPM_NONE 0x00000000
#define ATA_SC_IPM_DIS_PARTIAL 0x00000100
#define ATA_SC_IPM_DIS_SLUMBER 0x00000200
typedef union _SATA_SERROR_REG {
struct {
struct {
UCHAR I:1; // Recovered Data Integrity Error
UCHAR M:1; // Recovered Communications Error
UCHAR Reserved_2_7:6;
UCHAR T:1; // Transient Data Integrity Error
UCHAR C:1; // Persistent Communication or Data Integrity Error
UCHAR P:1; // Protocol Error
UCHAR E:1; // Internal Error
UCHAR Reserved_12_15:4;
} ERR;
struct {
UCHAR N:1; // PhyRdy Change, PIS.PRCS
UCHAR I:1; // Phy Internal Error
UCHAR W:1; // Comm Wake
UCHAR B:1; // 10B to 8B Decode Error
UCHAR D:1; // Disparity Error, not used by AHCI
UCHAR C:1; // CRC Error
UCHAR H:1; // Handshake Error
UCHAR S:1; // Link Sequence Error
UCHAR T:1; // Transport state transition error
UCHAR F:1; // Unknown FIS Type
UCHAR X:1; // Exchanged
UCHAR Reserved_27_31:5;
} DIAG;
};
ULONG Reg;
} SATA_SERROR_REG, *PSATA_SERROR_REG;
#define ATA_SE_DATA_CORRECTED 0x00000001
#define ATA_SE_COMM_CORRECTED 0x00000002
#define ATA_SE_DATA_ERR 0x00000100
#define ATA_SE_COMM_ERR 0x00000200
#define ATA_SE_PROT_ERR 0x00000400
#define ATA_SE_HOST_ERR 0x00000800
#define ATA_SE_PHY_CHANGED 0x00010000
#define ATA_SE_PHY_IERROR 0x00020000
#define ATA_SE_COMM_WAKE 0x00040000
#define ATA_SE_DECODE_ERR 0x00080000
#define ATA_SE_PARITY_ERR 0x00100000
#define ATA_SE_CRC_ERR 0x00200000
#define ATA_SE_HANDSHAKE_ERR 0x00400000
#define ATA_SE_LINKSEQ_ERR 0x00800000
#define ATA_SE_TRANSPORT_ERR 0x01000000
#define ATA_SE_UNKNOWN_FIS 0x02000000
typedef struct _IDE_SATA_REGISTERS {
union {
SATA_SSTATUS_REG SStatus;
ULONG SStatus_Reg;
};
union {
SATA_SERROR_REG SError;
ULONG SError_Reg;
};
union {
SATA_SCONTROL_REG SControl;
ULONG SControl_Reg;
};
// SATA 1.2
ULONG SActive;
union {
ULONG Reg;
struct {
USHORT PMN; // PM Notify, bitmask
USHORT Reserved;
};
} SNTF;
ULONG SReserved[11];
} IDE_SATA_REGISTERS, *PIDE_SATA_REGISTERS;
#define IDX_SATA_IO (IDX_BM_IO+IDX_BM_IO_SZ)
//#define IDX_SATA_IO_SZ sizeof(IDE_SATA_REGISTERS)
#define IDX_SATA_IO_SZ 5
#define IDX_SATA_SStatus (0+IDX_SATA_IO)
#define IDX_SATA_SError (1+IDX_SATA_IO)
#define IDX_SATA_SControl (2+IDX_SATA_IO)
#define IDX_SATA_SActive (3+IDX_SATA_IO)
#define IDX_SATA_SNTF_PMN (4+IDX_SATA_IO)
#define IDX_INDEXED_IO (IDX_SATA_IO+IDX_SATA_IO_SZ)
#define IDX_INDEXED_IO_SZ 2
#define IDX_INDEXED_ADDR (0+IDX_INDEXED_IO)
#define IDX_INDEXED_DATA (1+IDX_INDEXED_IO)
#define IDX_MAX_REG (IDX_INDEXED_IO+IDX_INDEXED_IO_SZ)
typedef union _AHCI_IS_REG {
struct {
ULONG DHRS:1;// Device to Host Register FIS Interrupt
ULONG PSS:1; // PIO Setup FIS Interrupt
ULONG DSS:1; // DMA Setup FIS Interrupt
ULONG SDBS:1;// Set Device Bits Interrupt
ULONG UFS:1; // Unknown FIS Interrupt
ULONG DPS:1; // Descriptor Processed
ULONG PCS:1; // Port Connect Change Status
ULONG DMPS:1;// Device Mechanical Presence Status
ULONG Reserved_8_21:14;
ULONG PRCS:1;// PhyRdy Change Status
ULONG IPMS:1;// Incorrect Port Multiplier Status
ULONG OFS:1; // Overflow Status
ULONG Reserved_25:1;
ULONG INFS:1;// Interface Non-fatal Error Status
ULONG IFS:1; // Interface Fatal Error Status
ULONG HBDS:1;// Host Bus Data Error Status
ULONG HBFS:1;// Host Bus Fatal Error Status
ULONG TFES:1;// Task File Error Status
ULONG CPDS:1;// Cold Port Detect Status
};
ULONG Reg;
} AHCI_IS_REG, *PAHCI_IS_REG;
#define ATA_AHCI_P_IX_DHR 0x00000001
#define ATA_AHCI_P_IX_PS 0x00000002
#define ATA_AHCI_P_IX_DS 0x00000004
#define ATA_AHCI_P_IX_SDB 0x00000008
#define ATA_AHCI_P_IX_UF 0x00000010
#define ATA_AHCI_P_IX_DP 0x00000020
#define ATA_AHCI_P_IX_PC 0x00000040
#define ATA_AHCI_P_IX_DI 0x00000080
#define ATA_AHCI_P_IX_PRC 0x00400000
#define ATA_AHCI_P_IX_IPM 0x00800000
#define ATA_AHCI_P_IX_OF 0x01000000
#define ATA_AHCI_P_IX_INF 0x04000000
#define ATA_AHCI_P_IX_IF 0x08000000
#define ATA_AHCI_P_IX_HBD 0x10000000
#define ATA_AHCI_P_IX_HBF 0x20000000
#define ATA_AHCI_P_IX_TFE 0x40000000
#define ATA_AHCI_P_IX_CPD 0x80000000
#define AHCI_CLB_ALIGNEMENT_MASK ((ULONGLONG)(1024-1))
#define AHCI_FIS_ALIGNEMENT_MASK ((ULONGLONG)(256-1))
#define AHCI_CMD_ALIGNEMENT_MASK ((ULONGLONG)(128-1))
typedef struct _IDE_AHCI_PORT_REGISTERS {
union {
struct {
ULONG CLB; // command list base address, 1K-aligned
ULONG CLBU; // command list base address (upper 32bits)
};
ULONGLONG CLB64;
}; // 0x100 + 0x80*c + 0x0000
union {
struct {
ULONG FB; // FIS base address
ULONG FBU; // FIS base address (upper 32bits)
};
ULONGLONG FB64;
}; // 0x100 + 0x80*c + 0x0008
union {
ULONG IS_Reg; // interrupt status
AHCI_IS_REG IS;
}; // 0x100 + 0x80*c + 0x0010
union {
ULONG Reg; // interrupt enable
struct {
ULONG DHRE:1;// Device to Host Register FIS Interrupt Enable
ULONG PSE:1; // PIO Setup FIS Interrupt Enable
ULONG DSE:1; // DMA Setup FIS Interrupt Enable
ULONG SDBE:1;// Set Device Bits FIS Interrupt Enable
ULONG UFE:1; // Unknown FIS Interrupt Enable
ULONG DPE:1; // Descriptor Processed Interrupt Enable
ULONG PCE:1; // Port Change Interrupt Enable
ULONG DPME:1;// Device Mechanical Presence Enable
ULONG Reserved_8_21:14;
ULONG PRCE:1;// PhyRdy Change Interrupt Enable
ULONG IPME:1;// Incorrect Port Multiplier Enable
ULONG OFE:1; // Overflow Enable
ULONG Reserved_25:1;
ULONG INFE:1;// Interface Non-fatal Error Enable
ULONG IFE:1; // Interface Fatal Error Enable
ULONG HBDE:1;// Host Bus Data Error Enable
ULONG HBFE:1;// Host Bus Fatal Error Enable
ULONG TFEE:1;// Task File Error Enable
ULONG CPDE:1;// Cold Port Detect Enable
};
} IE; // 0x100 + 0x80*c + 0x0014
union {
ULONG Reg; // command register
struct {
ULONG ST:1; // Start
ULONG SUD:1; // Spin-Up Device
ULONG POD:1; // Power On Device
ULONG CLO:1; // Command List Override
ULONG FRE:1; // FIS Receive Enable
ULONG Reserved_5_7:3;
ULONG CCS:5; // Current Command Slot
ULONG MPSS:1;// Mechanical Presence Switch State
ULONG FR:1; // FIS Receive Running
ULONG CR:1; // Command List Running
ULONG CPS:1; // Cold Presence State
ULONG PMA:1; // Port Multiplier Attached
ULONG HPCP:1;// Hot Plug Capable Port
ULONG MPSP:1;// Mechanical Presence Switch Attached to Port
ULONG CPD:1; // Cold Presence Detection
ULONG ESP:1; // External SATA Port
ULONG Reserved_22_23:2;
ULONG ATAPI:1; // Device is ATAPI
ULONG DLAE:1;// Drive LED on ATAPI Enable
ULONG ALPE:1;// Aggressive Link Power Management Enable
ULONG ASP:1; // Aggressive Slumber / Partial
ULONG ICC:4; // Interface Communication Control
#define SATA_CMD_ICC_Idle 0x00
#define SATA_CMD_ICC_NoOp 0x00
#define SATA_CMD_ICC_Active 0x01
#define SATA_CMD_ICC_Partial 0x02
#define SATA_CMD_ICC_Slumber 0x06
};
} CMD; // 0x100 + 0x80*c + 0x0018
ULONG Reserved;
union {
ULONG Reg; // Task File Data
struct {
struct {
UCHAR ERR:1;
UCHAR cs1:2;// command-specific
UCHAR DRQ:1;
UCHAR cs2:3;// command-specific
UCHAR BSY:1;
} STS;
UCHAR ERR; // Contains the latest copy of the task file error register.
UCHAR Reserved[2];
};
} TFD; // 0x100 + 0x80*c + 0x0020
union {
ULONG Reg; // signature
struct {
UCHAR SectorCount;
UCHAR LbaLow; // IDX_IO1_i_BlockNumber
UCHAR LbaMid; // IDX_IO1_i_CylinderLow
UCHAR LbaHigh; // IDX_IO1_i_CylinderHigh
};
} SIG; // 0x100 + 0x80*c + 0x0024
union {
ULONG SStatus; // SCR0
SATA_SSTATUS_REG SSTS;
}; // 0x100 + 0x80*c + 0x0028
union {
ULONG SControl; // SCR2
SATA_SCONTROL_REG SCTL;
}; // 0x100 + 0x80*c + 0x002c
union {
ULONG SError; // SCR1
SATA_SERROR_REG SERR;
}; // 0x100 + 0x80*c + 0x0030
union {
ULONG SACT; // SCR3
ULONG SActive; // bitmask
}; // 0x100 + 0x80*c + 0x0034
ULONG CI; // Command issue, bitmask, 0x100 + 0x80*c + 0x0038
// AHCI 1.1
union {
ULONG Reg;
struct {
USHORT PMN; // PM Notify, bitmask
USHORT Reserved;
};
} SNTF; // 0x100 + 0x80*c + 0x003c
// AHCI 1.2
union {
ULONG Reg;
struct {
ULONG EN:1; // Enable
ULONG DEC:1; // Device Error Clear
ULONG SDE:1; // Single Device Error
ULONG Reserved_3_7:5; // Reserved
ULONG DEV:4; // Device To Issue
ULONG ADO:4; // Active Device Optimization (recommended parallelism)
ULONG DWE:4; // Device With Error
ULONG Reserved_20_31:12; // Reserved
};
} FBS; // 0x100 + 0x80*c + 0x0040
ULONG Reserved_44_7f[11];
UCHAR VendorSpec[16];
} IDE_AHCI_PORT_REGISTERS, *PIDE_AHCI_PORT_REGISTERS;
#define IDX_AHCI_P_CLB (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CLB))
#define IDX_AHCI_P_FB (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, FB))
#define IDX_AHCI_P_IS (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, IS))
#define IDX_AHCI_P_IE (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, IE))
#define IDX_AHCI_P_CI (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CI))
#define IDX_AHCI_P_TFD (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, TFD))
#define IDX_AHCI_P_SIG (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SIG))
#define IDX_AHCI_P_CMD (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CMD))
#define IDX_AHCI_P_SStatus (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SStatus))
#define IDX_AHCI_P_SControl (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SControl))
#define IDX_AHCI_P_SError (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SError))
#define IDX_AHCI_P_ACT (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SACT))
#define IDX_AHCI_P_SNTF (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SNTF))
// AHCI commands ( -> IDX_AHCI_P_CMD)
#define ATA_AHCI_P_CMD_ST 0x00000001
#define ATA_AHCI_P_CMD_SUD 0x00000002
#define ATA_AHCI_P_CMD_POD 0x00000004
#define ATA_AHCI_P_CMD_CLO 0x00000008
#define ATA_AHCI_P_CMD_FRE 0x00000010
#define ATA_AHCI_P_CMD_CCS_MASK 0x00001f00
#define ATA_AHCI_P_CMD_ISS 0x00002000
#define ATA_AHCI_P_CMD_FR 0x00004000
#define ATA_AHCI_P_CMD_CR 0x00008000
#define ATA_AHCI_P_CMD_CPS 0x00010000
#define ATA_AHCI_P_CMD_PMA 0x00020000
#define ATA_AHCI_P_CMD_HPCP 0x00040000
#define ATA_AHCI_P_CMD_ISP 0x00080000
#define ATA_AHCI_P_CMD_CPD 0x00100000
#define ATA_AHCI_P_CMD_ESP 0x00200000
#define ATA_AHCI_P_CMD_ATAPI 0x01000000
#define ATA_AHCI_P_CMD_DLAE 0x02000000
#define ATA_AHCI_P_CMD_ALPE 0x04000000
#define ATA_AHCI_P_CMD_ASP 0x08000000
#define ATA_AHCI_P_CMD_ICC_MASK 0xf0000000
#define ATA_AHCI_P_CMD_NOOP 0x00000000
#define ATA_AHCI_P_CMD_ACTIVE 0x10000000
#define ATA_AHCI_P_CMD_PARTIAL 0x20000000
#define ATA_AHCI_P_CMD_SLUMBER 0x60000000
typedef struct _IDE_AHCI_PRD_ENTRY {
union {
ULONG base;
ULONGLONG base64;
struct {
ULONG DBA;
union {
ULONG DBAU;
ULONG baseu;
};
};
};
ULONG Reserved1;
union {
struct {
ULONG DBC:22;
ULONG Reserved2:9;
ULONG I:1;
};
ULONG DBC_ULONG;
};
} IDE_AHCI_PRD_ENTRY, *PIDE_AHCI_PRD_ENTRY;
#define ATA_AHCI_DMA_ENTRIES (PAGE_SIZE/2/sizeof(IDE_AHCI_PRD_ENTRY)) /* 128 */
#define ATA_AHCI_MAX_TAGS 32
#define AHCI_FIS_TYPE_ATA_H2D 0x27
#define AHCI_FIS_TYPE_ATA_D2H 0x34
#define AHCI_FIS_TYPE_DMA_D2H 0x39
#define AHCI_FIS_TYPE_DMA_BiDi 0x41
#define AHCI_FIS_TYPE_DATA_BiDi 0x46
#define AHCI_FIS_TYPE_BIST_BiDi 0x58
#define AHCI_FIS_TYPE_PIO_D2H 0x5f
#define AHCI_FIS_TYPE_DEV_BITS_D2H 0xA1
typedef struct _AHCI_ATA_H2D_FIS {
UCHAR FIS_Type; // = 0x27
UCHAR Reserved1:7;
UCHAR Cmd:1; // update Command register
UCHAR Command; // [2]
UCHAR Feature; // [3]
UCHAR BlockNumber; // [4]
UCHAR CylinderLow; // [5]
UCHAR CylinderHigh; // [6]
UCHAR DriveSelect; // [7]
UCHAR BlockNumberExp; // [8]
UCHAR CylinderLowExp; // [9]
UCHAR CylinderHighExp; // [10]
UCHAR FeatureExp; // [11]
UCHAR BlockCount; // [12]
UCHAR BlockCountExp; // [13]
UCHAR Reserved14; // [14]
UCHAR Control; // [15]
} AHCI_ATA_H2D_FIS, *PAHCI_ATA_H2D_FIS;
#define IDX_AHCI_o_Command (FIELD_OFFSET(AHCI_ATA_H2D_FIS, Command))
#define IDX_AHCI_o_Feature (FIELD_OFFSET(AHCI_ATA_H2D_FIS, Feature))
#define IDX_AHCI_o_BlockNumber (FIELD_OFFSET(AHCI_ATA_H2D_FIS, BlockNumber ))
#define IDX_AHCI_o_CylinderLow (FIELD_OFFSET(AHCI_ATA_H2D_FIS, CylinderLow ))
#define IDX_AHCI_o_CylinderHigh (FIELD_OFFSET(AHCI_ATA_H2D_FIS, CylinderHigh))
#define IDX_AHCI_o_DriveSelect (FIELD_OFFSET(AHCI_ATA_H2D_FIS, DriveSelect ))
#define IDX_AHCI_o_BlockCount (FIELD_OFFSET(AHCI_ATA_H2D_FIS, BlockCount))
#define IDX_AHCI_o_Control (FIELD_OFFSET(AHCI_ATA_H2D_FIS, Control))
#define IDX_AHCI_o_FeatureExp (FIELD_OFFSET(AHCI_ATA_H2D_FIS, FeatureExp))
#define IDX_AHCI_o_BlockNumberExp (FIELD_OFFSET(AHCI_ATA_H2D_FIS, BlockNumberExp ))
#define IDX_AHCI_o_CylinderLowExp (FIELD_OFFSET(AHCI_ATA_H2D_FIS, CylinderLowExp ))
#define IDX_AHCI_o_CylinderHighExp (FIELD_OFFSET(AHCI_ATA_H2D_FIS, CylinderHighExp))
#define IDX_AHCI_o_BlockCountExp (FIELD_OFFSET(AHCI_ATA_H2D_FIS, BlockCountExp))
#define AHCI_FIS_COMM_PM (0x80 | AHCI_DEV_SEL_PM)
#define AHCI_DEV_SEL_1 0x00
#define AHCI_DEV_SEL_2 0x01
#define AHCI_DEV_SEL_PM 0x0f
/* 128-byte aligned */
typedef struct _IDE_AHCI_CMD {
UCHAR cfis[64];
UCHAR acmd[16];
UCHAR Reserved[48];
IDE_AHCI_PRD_ENTRY prd_tab[ATA_AHCI_DMA_ENTRIES]; // also 128-byte aligned
} IDE_AHCI_CMD, *PIDE_AHCI_CMD;
/* cmd_flags */
#define ATA_AHCI_CMD_ATAPI 0x0020
#define ATA_AHCI_CMD_WRITE 0x0040
#define ATA_AHCI_CMD_PREFETCH 0x0080
#define ATA_AHCI_CMD_RESET 0x0100
#define ATA_AHCI_CMD_BIST 0x0200
#define ATA_AHCI_CMD_CLR_BUSY 0x0400
/* 128-byte aligned */
typedef struct _IDE_AHCI_CMD_LIST {
USHORT cmd_flags;
USHORT prd_length; /* PRD entries */
ULONG bytecount;
ULONGLONG cmd_table_phys; /* points to IDE_AHCI_CMD */
ULONG Reserved[4];
} IDE_AHCI_CMD_LIST, *PIDE_AHCI_CMD_LIST;
/* 256-byte aligned */
typedef struct _IDE_AHCI_RCV_FIS {
UCHAR dsfis[28];
UCHAR Reserved1[4];
UCHAR psfis[20];
UCHAR Reserved2[12];
UCHAR rfis[20];
UCHAR Reserved3[4];
UCHAR SDBFIS[8];
UCHAR ufis[64];
UCHAR Reserved4[96];
} IDE_AHCI_RCV_FIS, *PIDE_AHCI_RCV_FIS;
/* 1K-byte aligned */
typedef struct _IDE_AHCI_CHANNEL_CTL_BLOCK {
IDE_AHCI_CMD_LIST cmd_list[ATA_AHCI_MAX_TAGS]; // 1K-size (32*32)
IDE_AHCI_RCV_FIS rcv_fis;
IDE_AHCI_CMD cmd; // for single internal commands w/o associated AtaReq
} IDE_AHCI_CHANNEL_CTL_BLOCK, *PIDE_AHCI_CHANNEL_CTL_BLOCK;
#pragma pack(pop)
#define IsBusMaster(pciData) \
( ((pciData)->Command & (PCI_ENABLE_BUS_MASTER/* | PCI_ENABLE_IO_SPACE*/)) == \
(PCI_ENABLE_BUS_MASTER/* | PCI_ENABLE_IO_SPACE*/))
#define PCI_IDE_PROGIF_NATIVE_1 0x01
#define PCI_IDE_PROGIF_NATIVE_2 0x04
#define PCI_IDE_PROGIF_NATIVE_ALL 0x05
#define IsMasterDev(pciData) \
( ((pciData)->ProgIf & 0x80) && \
((pciData)->ProgIf & PCI_IDE_PROGIF_NATIVE_ALL) != PCI_IDE_PROGIF_NATIVE_ALL )
//#define INT_Q_SIZE 32
#define MIN_REQ_TTL 4
union _ATA_REQ;
typedef union _ATA_REQ {
// ULONG reqId; // serial
struct {
//union {
struct {
union _ATA_REQ* next_req;
union _ATA_REQ* prev_req;
PSCSI_REQUEST_BLOCK Srb; // Current request on controller.
PUSHORT DataBuffer; // Data buffer pointer.
ULONG WordsLeft; // Data words left.
ULONG TransferLength; // Originally requested transfer length
LONGLONG lba;
ULONG WordsTransfered;// Data words already transfered.
ULONG bcount;
UCHAR retry;
UCHAR ttl;
// UCHAR tag;
UCHAR Flags;
UCHAR ReqState;
PSCSI_REQUEST_BLOCK OriginalSrb; // Mechanism Status Srb Data
ULONG dma_entries;
union {
// for ATA
struct {
ULONG dma_base;
ULONG dma_baseu;
} ata;
// for AHCI
struct {
ULONGLONG ahci_base64;
ULONGLONG in_lba;
PIDE_AHCI_CMD ahci_cmd_ptr;
ULONG in_bcount;
ULONG in_status;
ULONG in_serror;
USHORT io_cmd_flags; // out
UCHAR in_error;
} ahci;
};
};
//UCHAR padding_128b[128]; // Note: we assume, NT allocates block > 4k as PAGE-aligned
//};
struct {
union {
BM_DMA_ENTRY dma_tab[ATA_DMA_ENTRIES];
IDE_AHCI_CMD ahci_cmd0; // for AHCI, 128-byte aligned
};
};
};
UCHAR padding_4kb[PAGE_SIZE];
} ATA_REQ, *PATA_REQ;
#define REQ_FLAG_FORCE_DOWNRATE 0x01
#define REQ_FLAG_DMA_OPERATION 0x02
#define REQ_FLAG_REORDERABLE_CMD 0x04
#define REQ_FLAG_RW_MASK 0x08
#define REQ_FLAG_READ 0x08
#define REQ_FLAG_WRITE 0x00
#define REQ_FLAG_FORCE_DOWNRATE_LBA48 0x10
#define REQ_FLAG_DMA_DBUF 0x20
#define REQ_FLAG_DMA_DBUF_PRD 0x40
#define REQ_FLAG_LBA48 0x80
// Request states
#define REQ_STATE_NONE 0x00
#define REQ_STATE_QUEUED 0x10
#define REQ_STATE_PREPARE_TO_TRANSFER 0x20
#define REQ_STATE_PREPARE_TO_NEXT 0x21
#define REQ_STATE_READY_TO_TRANSFER 0x30
#define REQ_STATE_EXPECTING_INTR 0x40
#define REQ_STATE_ATAPI_EXPECTING_CMD_INTR 0x41
#define REQ_STATE_ATAPI_EXPECTING_DATA_INTR 0x42
#define REQ_STATE_ATAPI_EXPECTING_DATA_INTR2 0x43
#define REQ_STATE_ATAPI_DO_NOTHING_INTR 0x44
#define REQ_STATE_EARLY_INTR 0x48
#define REQ_STATE_PROCESSING_INTR 0x50
#define REQ_STATE_DPC_INTR_REQ 0x51
#define REQ_STATE_DPC_RESET_REQ 0x52
#define REQ_STATE_DPC_COMPLETE_REQ 0x53
#define REQ_STATE_DPC_WAIT_BUSY0 0x57
#define REQ_STATE_DPC_WAIT_BUSY1 0x58
#define REQ_STATE_DPC_WAIT_BUSY 0x59
#define REQ_STATE_DPC_WAIT_DRQ 0x5a
#define REQ_STATE_DPC_WAIT_DRQ0 0x5b
#define REQ_STATE_DPC_WAIT_DRQ_ERR 0x5c
#define REQ_STATE_TRANSFER_COMPLETE 0x7f
// Command actions:
#define CMD_ACTION_PREPARE 0x01
#define CMD_ACTION_EXEC 0x02
#define CMD_ACTION_ALL (CMD_ACTION_PREPARE | CMD_ACTION_EXEC)
// predefined Reorder costs
#define REORDER_COST_MAX ((DEF_I64(0x1) << 60) - 1)
#define REORDER_COST_TTL (REORDER_COST_MAX - 1)
#define REORDER_COST_INTERSECT (REORDER_COST_MAX - 2)
#define REORDER_COST_DENIED (REORDER_COST_MAX - 3)
#define REORDER_COST_RESELECT (REORDER_COST_MAX/4)
#define REORDER_COST_SWITCH_RW_CD (REORDER_COST_MAX/8)
#define REORDER_MCOST_SWITCH_RW_CD (0)
#define REORDER_MCOST_SEEK_BACK_CD (16)
#define REORDER_COST_SWITCH_RW_HDD (0)
#define REORDER_MCOST_SWITCH_RW_HDD (4)
#define REORDER_MCOST_SEEK_BACK_HDD (2)
/*typedef struct _ATA_QUEUE {
struct _ATA_REQ* head_req; // index
struct _ATA_REQ* tail_req; // index
ULONG req_count;
ULONG dma_base;
BM_DMA_ENTRY dma_tab[ATA_DMA_ENTRIES];
} ATA_QUEUE, *PATA_QUEUE;*/
struct _HW_DEVICE_EXTENSION;
struct _HW_LU_EXTENSION;
typedef struct _IORES {
union {
#ifdef __REACTOS__
ULONG_PTR Addr; /* Base address*/
#else
ULONG Addr; /* Base address*/
#endif
PVOID pAddr; /* Base address in pointer form */
};
ULONG MemIo:1; /* Memory mapping (1) vs IO ports (0) */
ULONG Proc:1; /* Need special processing via IO_Proc */
ULONG Reserved:30;
} IORES, *PIORES;
// Channel extension
typedef struct _HW_CHANNEL {
PATA_REQ cur_req;
ULONG cur_cdev;
ULONG last_cdev; /* device for which we have configured timings last time */
ULONG last_devsel; /* device selected during last call to SelectDrive() */
/* PATA_REQ first_req;
PATA_REQ last_req;*/
ULONG queue_depth;
ULONG ChannelSelectWaitCount;
UCHAR DpcState;
BOOLEAN ExpectingInterrupt; // Indicates expecting an interrupt
BOOLEAN RDP; // Indicate last tape command was DSC Restrictive.
// Indicates whether '0x1f0' is the base address. Used
// in SMART Ioctl calls.
BOOLEAN PrimaryAddress;
// Placeholder for the sub-command value of the last
// SMART command.
UCHAR SmartCommand;
// Reorder anabled
BOOLEAN UseReorder;
// Placeholder for status register after a GET_MEDIA_STATUS command
UCHAR ReturningMediaStatus;
BOOLEAN CopyDmaBuffer;
//BOOLEAN MemIo;
BOOLEAN AltRegMap;
BOOLEAN Force80pin;
UCHAR Reserved[2];
MECHANICAL_STATUS_INFORMATION_HEADER MechStatusData;
SENSE_DATA MechStatusSense;
ULONG MechStatusRetryCount;
SCSI_REQUEST_BLOCK InternalSrb;
ULONG MaxTransferMode; // may differ from Controller's value due to 40-pin cable
ULONG ChannelCtrlFlags;
ULONG ResetInProgress; // flag
LONG DisableIntr;
LONG CheckIntr;
ULONG lChannel;
#define CHECK_INTR_ACTIVE 0x03
#define CHECK_INTR_DETECTED 0x02
#define CHECK_INTR_CHECK 0x01
#define CHECK_INTR_IDLE 0x00
ULONG NextDpcChan;
PHW_TIMER HwScsiTimer;
LONGLONG DpcTime;
#if 0
PHW_TIMER HwScsiTimer1;
PHW_TIMER HwScsiTimer2;
LONGLONG DpcTime1;
// PHW_TIMER CurDpc;
// LARGE_INTEGER ActivationTime;
// KDPC Dpc;
// KTIMER Timer;
// PHW_TIMER HwScsiTimer;
// KSPIN_LOCK QueueSpinLock;
// KIRQL QueueOldIrql;
#endif
struct _HW_DEVICE_EXTENSION* DeviceExtension;
struct _HW_LU_EXTENSION* lun[IDE_MAX_LUN_PER_CHAN];
ULONG NumberLuns;
ULONG PmLunMap;
// Double-buffering support
PVOID DB_PRD;
ULONG DB_PRD_PhAddr;
PVOID DB_IO;
ULONG DB_IO_PhAddr;
PUCHAR DmaBuffer;
//
PIDE_AHCI_CHANNEL_CTL_BLOCK AhciCtlBlock0; // unaligned
PIDE_AHCI_CHANNEL_CTL_BLOCK AhciCtlBlock; // 128-byte aligned
ULONGLONG AHCI_CTL_PhAddr;
IORES BaseIoAHCI_Port;
ULONG AhciPrevCI;
ULONG AhciCompleteCI;
ULONG AhciLastIS;
ULONG AhciLastSError;
//PVOID AHCI_FIS; // is not actually used by UniATA now, but is required by AHCI controller
//ULONGLONG AHCI_FIS_PhAddr;
// Note: in contrast to FBSD, we keep PRD and CMD item in AtaReq structure
PATA_REQ AhciInternalAtaReq;
PSCSI_REQUEST_BLOCK AhciInternalSrb;
#ifdef QUEUE_STATISTICS
LONGLONG QueueStat[MAX_QUEUE_STAT];
LONGLONG ReorderCount;
LONGLONG IntersectCount;
LONGLONG TryReorderCount;
LONGLONG TryReorderHeadCount;
LONGLONG TryReorderTailCount; /* in-order requests */
#endif //QUEUE_STATISTICS
//ULONG BaseMemAddress;
//ULONG BaseMemAddressOffset;
IORES RegTranslation[IDX_MAX_REG];
} HW_CHANNEL, *PHW_CHANNEL;
#define CTRFLAGS_DMA_ACTIVE 0x0001
#define CTRFLAGS_DMA_RO 0x0002
#define CTRFLAGS_DMA_OPERATION 0x0004
#define CTRFLAGS_INTR_DISABLED 0x0008
#define CTRFLAGS_DPC_REQ 0x0010
#define CTRFLAGS_ENABLE_INTR_REQ 0x0020
#define CTRFLAGS_LBA48 0x0040
#define CTRFLAGS_DSC_BSY 0x0080
#define CTRFLAGS_NO_SLAVE 0x0100
//#define CTRFLAGS_DMA_BEFORE_R 0x0200
//#define CTRFLAGS_PATA 0x0200
//#define CTRFLAGS_NOT_PRESENT 0x0200
#define CTRFLAGS_AHCI_PM 0x0400
#define CTRFLAGS_AHCI_PM2 0x0800
#define CTRFLAGS_PERMANENT (CTRFLAGS_DMA_RO | CTRFLAGS_NO_SLAVE)
#define GEOM_AUTO 0xffffffff
#define GEOM_STD 0x0000
#define GEOM_UNIATA 0x0001
#define GEOM_ORIG 0x0002
#define GEOM_MANUAL 0x0003
#define DPC_STATE_NONE 0x00
#define DPC_STATE_ISR 0x10
#define DPC_STATE_DPC 0x20
#define DPC_STATE_TIMER 0x30
#define DPC_STATE_COMPLETE 0x40
// Logical unit extension
typedef struct _HW_LU_EXTENSION {
IDENTIFY_DATA2 IdentifyData;
ULONGLONG NumOfSectors;
ULONG DeviceFlags; // Flags word for each possible device. DFLAGS_XXX
ULONG DiscsPresent; // Indicates number of platters on changer-ish devices.
BOOLEAN DWordIO; // Indicates use of 32-bit PIO
UCHAR ReturningMediaStatus;
UCHAR MaximumBlockXfer;
UCHAR PowerState;
UCHAR TransferMode; // current transfer mode
UCHAR LimitedTransferMode; // user-defined or IDE cable limitation
UCHAR OrigTransferMode; // transfer mode, returned by device IDENTIFY (can be changed via IOCTL)
UCHAR PhyTransferMode; // phy transfer mode (actual bus transfer mode for PATA DMA and SATA)
ULONG ErrorCount; // Count of errors. Used to turn off features.
// ATA_QUEUE cmd_queue;
LONGLONG ReadCmdCost;
LONGLONG WriteCmdCost;
LONGLONG OtherCmdCost;
LONGLONG RwSwitchCost;
LONGLONG RwSwitchMCost;
LONGLONG SeekBackMCost;
//
PATA_REQ first_req;
PATA_REQ last_req;
ULONG queue_depth;
ULONG last_write;
ULONG LunSelectWaitCount;
ULONG AtapiReadyWaitDelay;
// tuning options
ULONG opt_GeomType;
ULONG opt_MaxTransferMode;
ULONG opt_PreferedTransferMode;
BOOLEAN opt_ReadCacheEnable;
BOOLEAN opt_WriteCacheEnable;
UCHAR opt_ReadOnly;
UCHAR opt_AdvPowerMode;
UCHAR opt_AcousticMode;
UCHAR opt_StandbyTimer;
UCHAR opt_Padding[2]; // padding
struct _SBadBlockListItem* bbListDescr;
struct _SBadBlockRange* arrBadBlocks;
ULONG nBadBlocks;
// Controller-specific LUN options
union {
/* for tricky controllers, those can change Logical-to-Physical LUN mapping.
mainly for mapping SATA ports to compatible PATA registers
Treated as PHYSICAL port number, regardless of logical mapping.
*/
ULONG SATA_lun_map;
};
struct _HW_DEVICE_EXTENSION* DeviceExtension;
struct _HW_CHANNEL* chan;
ULONG Lun;
ULONGLONG errLastLba;
ULONG errBCount;
UCHAR errRetry;
UCHAR errPadding[3];
#ifdef IO_STATISTICS
LONGLONG ModeErrorCount[MAX_RETRIES];
LONGLONG RecoverCount[MAX_RETRIES];
LONGLONG IoCount;
LONGLONG BlockIoCount;
#endif//IO_STATISTICS
} HW_LU_EXTENSION, *PHW_LU_EXTENSION;
// Device extension
typedef struct _HW_DEVICE_EXTENSION {
CHAR Signature[32];
//PIDE_REGISTERS_1 BaseIoAddress1[IDE_MAX_CHAN]; // Base register locations
//PIDE_REGISTERS_2 BaseIoAddress2[IDE_MAX_CHAN];
ULONG BusInterruptLevel; // Interrupt level
ULONG InterruptMode; // Interrupt Mode (Level or Edge)
ULONG BusInterruptVector;
// Number of channels being supported by one instantiation
// of the device extension. Normally (and correctly) one, but
// with so many broken PCI IDE controllers being sold, we have
// to support them.
ULONG NumberChannels;
ULONG NumberLuns;
ULONG FirstChannelToCheck;
#if 0
HW_LU_EXTENSION lun[IDE_MAX_LUN];
HW_CHANNEL chan[AHCI_MAX_PORT/*IDE_MAX_CHAN*/];
#else
PHW_LU_EXTENSION lun; // lun array
PHW_CHANNEL chan; // channel array
#endif
UCHAR LastInterruptedChannel;
// Indicates the number of blocks transferred per int. according to the
// identify data.
BOOLEAN DriverMustPoll; // Driver is being used by the crash dump utility or ntldr.
BOOLEAN BusMaster;
BOOLEAN UseDpc; // Indicates use of DPC on long waits
IDENTIFY_DATA FullIdentifyData; // Identify data for device
// BusMaster specific data
// PBM_DMA_ENTRY dma_tab_0;
//KSPIN_LOCK DpcSpinLock;
ULONG ActiveDpcChan;
ULONG FirstDpcChan;
ULONG ExpectingInterrupt; // Indicates entire controller expecting an interrupt
/*
PHW_TIMER HwScsiTimer1;
PHW_TIMER HwScsiTimer2;
LONGLONG DpcTime1;
LONGLONG DpcTime2;
*/
ULONG queue_depth;
PDEVICE_OBJECT Isr2DevObj;
//PIDE_BUSMASTER_REGISTERS BaseIoAddressBM_0;
IORES BaseIoAddressBM_0;
//PIDE_BUSMASTER_REGISTERS BaseIoAddressBM[IDE_MAX_CHAN];
// Device identification
ULONG DevID;
ULONG RevID;
ULONG slotNumber;
ULONG SystemIoBusNumber;
ULONG DevIndex;
ULONG InitMethod; // vendor specific
ULONG Channel;
ULONG HbaCtrlFlags;
BOOLEAN simplexOnly;
//BOOLEAN MemIo;
BOOLEAN AltRegMap;
BOOLEAN UnknownDev;
BOOLEAN MasterDev;
BOOLEAN Host64;
BOOLEAN DWordIO; // Indicates use of 32-bit PIO
/* // Indicates, that HW Initialized is already called for this controller
// 0 bit for Primary, 1 - for Secondary. Is used to manage AltInit under w2k+
UCHAR Initialized; */
UCHAR Reserved1[2];
LONG ReCheckIntr;
ULONG MaxTransferMode; // max transfer mode supported by controller
ULONG HwFlags;
INTERFACE_TYPE OrigAdapterInterfaceType;
INTERFACE_TYPE AdapterInterfaceType;
ULONG MaximumDmaTransferLength;
ULONG AlignmentMask;
ULONG DmaSegmentLength;
ULONG DmaSegmentAlignmentMask; // must be PAGE-aligned
//ULONG BaseMemAddress;
//PIDE_SATA_REGISTERS BaseIoAddressSATA_0;
IORES BaseIoAddressSATA_0;
//PIDE_SATA_REGISTERS BaseIoAddressSATA[IDE_MAX_CHAN];
IORES BaseIoAHCI_0;
//PIDE_AHCI_PORT_REGISTERS BaseIoAHCIPort[AHCI_MAX_PORT];
ULONG AHCI_CAP;
ULONG AHCI_PI;
ULONG AHCI_PI_mask; // for port exclusion, usually = AHCI_PI
PATA_REQ AhciInternalAtaReq0;
PSCSI_REQUEST_BLOCK AhciInternalSrb0;
BOOLEAN opt_AtapiDmaZeroTransfer; // default FALSE
BOOLEAN opt_AtapiDmaControlCmd; // default FALSE
BOOLEAN opt_AtapiDmaRawRead; // default TRUE
BOOLEAN opt_AtapiDmaReadWrite; // default TRUE
PCCH FullDevName;
// Controller specific state/options
union {
ULONG HwCfg;
};
} HW_DEVICE_EXTENSION, *PHW_DEVICE_EXTENSION;
typedef struct _ISR2_DEVICE_EXTENSION {
PHW_DEVICE_EXTENSION HwDeviceExtension;
ULONG DevIndex;
} ISR2_DEVICE_EXTENSION, *PISR2_DEVICE_EXTENSION;
typedef ISR2_DEVICE_EXTENSION PCIIDE_DEVICE_EXTENSION;
typedef PISR2_DEVICE_EXTENSION PPCIIDE_DEVICE_EXTENSION;
#define HBAFLAGS_DMA_DISABLED 0x01
#define HBAFLAGS_DMA_DISABLED_LBA48 0x02
extern UCHAR pciBuffer[256];
extern PBUSMASTER_CONTROLLER_INFORMATION BMList;
extern ULONG BMListLen;
extern ULONG IsaCount;
extern ULONG MCACount;
extern UNICODE_STRING SavedRegPath;
//extern const CHAR retry_Wdma[MAX_RETRIES+1];
//extern const CHAR retry_Udma[MAX_RETRIES+1];
extern VOID
NTAPI
UniataEnumBusMasterController(
IN PVOID DriverObject,
PVOID Argument2
);
extern ULONG NTAPI
UniataFindCompatBusMasterController1(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
);
extern ULONG NTAPI
UniataFindCompatBusMasterController2(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
);
#define UNIATA_ALLOCATE_NEW_LUNS 0x00
extern BOOLEAN NTAPI
UniataAllocateLunExt(
PHW_DEVICE_EXTENSION deviceExtension,
ULONG NewNumberChannels
);
extern VOID NTAPI
UniataFreeLunExt(
PHW_DEVICE_EXTENSION deviceExtension
);
extern ULONG NTAPI
UniataFindBusMasterController(
IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
OUT PBOOLEAN Again
);
extern NTSTATUS
NTAPI
UniataClaimLegacyPCIIDE(
ULONG i
);
extern NTSTATUS
NTAPI
UniataConnectIntr2(
IN PVOID HwDeviceExtension
);
extern NTSTATUS
NTAPI
UniataDisconnectIntr2(
IN PVOID HwDeviceExtension
);
extern ULONG
NTAPI
ScsiPortGetBusDataByOffset(
IN PVOID HwDeviceExtension,
IN BUS_DATA_TYPE BusDataType,
IN ULONG BusNumber,
IN ULONG SlotNumber,
IN PVOID Buffer,
IN ULONG Offset,
IN ULONG Length
);
#define PCIBUSNUM_NOT_SPECIFIED (0xffffffffL)
#define PCISLOTNUM_NOT_SPECIFIED (0xffffffffL)
extern ULONG
NTAPI
AtapiFindListedDev(
PBUSMASTER_CONTROLLER_INFORMATION_BASE BusMasterAdapters,
ULONG lim,
IN PVOID HwDeviceExtension,
IN ULONG BusNumber,
IN ULONG SlotNumber,
OUT PCI_SLOT_NUMBER* _slotData // optional
);
extern ULONG
NTAPI
AtapiFindDev(
IN PVOID HwDeviceExtension,
IN BUS_DATA_TYPE BusDataType,
IN ULONG BusNumber,
IN ULONG SlotNumber,
IN ULONG dev_id,
IN ULONG RevID
);
extern VOID
NTAPI
AtapiDmaAlloc(
IN PVOID HwDeviceExtension,
IN PPORT_CONFIGURATION_INFORMATION ConfigInfo,
IN ULONG lChannel // logical channel,
);
extern BOOLEAN
NTAPI
AtapiDmaSetup(
IN PVOID HwDeviceExtension,
IN ULONG DeviceNumber,
IN ULONG lChannel, // logical channel,
IN PSCSI_REQUEST_BLOCK Srb,
IN PUCHAR data,
IN ULONG count
);
extern BOOLEAN
NTAPI
AtapiDmaPioSync(
PVOID HwDeviceExtension,
PSCSI_REQUEST_BLOCK Srb,
PUCHAR data,
ULONG count
);
extern BOOLEAN
NTAPI
AtapiDmaDBSync(
PHW_CHANNEL chan,
PSCSI_REQUEST_BLOCK Srb
);
extern BOOLEAN
NTAPI
AtapiDmaDBPreSync(
IN PVOID HwDeviceExtension,
PHW_CHANNEL chan,
PSCSI_REQUEST_BLOCK Srb
);
extern VOID
NTAPI
AtapiDmaStart(
IN PVOID HwDeviceExtension,
IN ULONG DeviceNumber,
IN ULONG lChannel, // logical channel,
IN PSCSI_REQUEST_BLOCK Srb
);
extern UCHAR
NTAPI
AtapiDmaDone(
IN PVOID HwDeviceExtension,
IN ULONG DeviceNumber,
IN ULONG lChannel, // logical channel,
IN PSCSI_REQUEST_BLOCK Srb
);
extern VOID
NTAPI
AtapiDmaReinit(
IN PHW_DEVICE_EXTENSION deviceExtension,
IN PHW_LU_EXTENSION LunExt,
IN PATA_REQ AtaReq
);
extern VOID
NTAPI
AtapiDmaInit__(
IN PHW_DEVICE_EXTENSION deviceExtension,
IN PHW_LU_EXTENSION LunExt
);
extern VOID
NTAPI
AtapiDmaInit(
IN PVOID HwDeviceExtension,
IN ULONG DeviceNumber,
IN ULONG lChannel, // logical channel,
// is always 0 except simplex-only and multi-channel controllers
IN SCHAR apiomode,
IN SCHAR wdmamode,
IN SCHAR udmamode
);
extern BOOLEAN NTAPI
AtapiInterrupt2(
IN PKINTERRUPT Interrupt,
IN PVOID HwDeviceExtension
);
extern PDRIVER_OBJECT SavedDriverObject;
extern BOOLEAN
NTAPI
UniataChipDetectChannels(
IN PVOID HwDeviceExtension,
IN PPCI_COMMON_CONFIG pciData, // optional
IN ULONG DeviceNumber,
IN PPORT_CONFIGURATION_INFORMATION ConfigInfo
);
extern NTSTATUS
NTAPI
UniataChipDetect(
IN PVOID HwDeviceExtension,
IN PPCI_COMMON_CONFIG pciData, // optional
IN ULONG DeviceNumber,
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
IN BOOLEAN* simplexOnly
);
extern BOOLEAN
NTAPI
AtapiChipInit(
IN PVOID HwDeviceExtension,
IN ULONG DeviceNumber,
IN ULONG c
);
extern ULONGIO_PTR
NTAPI
AtapiGetIoRange(
IN PVOID HwDeviceExtension,
IN PPORT_CONFIGURATION_INFORMATION ConfigInfo,
IN PPCI_COMMON_CONFIG pciData,
IN ULONG SystemIoBusNumber,
IN ULONG rid,
IN ULONG offset,
IN ULONG length //range id
);
extern USHORT
NTAPI
UniataEnableIoPCI(
IN ULONG busNumber,
IN ULONG slotNumber,
IN OUT PPCI_COMMON_CONFIG pciData
);
/****************** 1 *****************/
#define GetPciConfig1(offs, op) { \
ScsiPortGetBusDataByOffset(HwDeviceExtension, \
PCIConfiguration, \
SystemIoBusNumber, \
slotNumber, \
&op, \
offs, \
1); \
}
#define SetPciConfig1(offs, op) { \
UCHAR _a = op; \
ScsiPortSetBusDataByOffset(HwDeviceExtension, \
PCIConfiguration, \
SystemIoBusNumber, \
slotNumber, \
&_a, \
offs, \
1); \
}
#define ChangePciConfig1(offs, _op) { \
UCHAR a = 0; \
GetPciConfig1(offs, a); \
a = (UCHAR)(_op); \
SetPciConfig1(offs, a); \
}
/****************** 2 *****************/
#define GetPciConfig2(offs, op) { \
ScsiPortGetBusDataByOffset(HwDeviceExtension, \
PCIConfiguration, \
SystemIoBusNumber, \
slotNumber, \
&op, \
offs, \
2); \
}
#define SetPciConfig2(offs, op) { \
USHORT _a = op; \
ScsiPortSetBusDataByOffset(HwDeviceExtension, \
PCIConfiguration, \
SystemIoBusNumber, \
slotNumber, \
&_a, \
offs, \
2); \
}
#define ChangePciConfig2(offs, _op) { \
USHORT a = 0; \
GetPciConfig2(offs, a); \
a = (USHORT)(_op); \
SetPciConfig2(offs, a); \
}
/****************** 4 *****************/
#define GetPciConfig4(offs, op) { \
ScsiPortGetBusDataByOffset(HwDeviceExtension, \
PCIConfiguration, \
SystemIoBusNumber, \
slotNumber, \
&op, \
offs, \
4); \
}
#define SetPciConfig4(offs, op) { \
ULONG _a = op; \
ScsiPortSetBusDataByOffset(HwDeviceExtension, \
PCIConfiguration, \
SystemIoBusNumber, \
slotNumber, \
&_a, \
offs, \
4); \
}
#define ChangePciConfig4(offs, _op) { \
ULONG a = 0; \
GetPciConfig4(offs, a); \
a = _op; \
SetPciConfig4(offs, a); \
}
#define DMA_MODE_NONE 0x00
#define DMA_MODE_BM 0x01
#define DMA_MODE_AHCI 0x02
#ifndef GetDmaStatus
#define GetDmaStatus(de, c) \
(((de)->BusMaster == DMA_MODE_BM) ? AtapiReadPort1(&((de)->chan[c]), IDX_BM_Status) : 0)
#endif //GetDmaStatus
#ifdef USE_OWN_DMA
#define AtapiVirtToPhysAddr(hwde, srb, phaddr, plen, phaddru) \
AtapiVirtToPhysAddr_(hwde, srb, phaddr, plen, phaddru);
#else
#define AtapiVirtToPhysAddr(hwde, srb, phaddr, plen, phaddru) \
(ScsiPortConvertPhysicalAddressToUlong/*(ULONG)ScsiPortGetVirtualAddress*/(/*hwde,*/ \
ScsiPortGetPhysicalAddress(hwde, srb, phaddr, plen)))
#endif //USE_OWN_DMA
VOID
DDKFASTAPI
AtapiWritePort4(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN ULONG data
);
VOID
DDKFASTAPI
AtapiWritePort2(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN USHORT data
);
VOID
DDKFASTAPI
AtapiWritePort1(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN UCHAR data
);
VOID
DDKFASTAPI
AtapiWritePortEx4(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN ULONG offs,
IN ULONG data
);
VOID
DDKFASTAPI
AtapiWritePortEx1(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN ULONG offs,
IN UCHAR data
);
ULONG
DDKFASTAPI
AtapiReadPort4(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port
);
USHORT
DDKFASTAPI
AtapiReadPort2(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port
);
UCHAR
DDKFASTAPI
AtapiReadPort1(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port
);
ULONG
DDKFASTAPI
AtapiReadPortEx4(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN ULONG offs
);
UCHAR
DDKFASTAPI
AtapiReadPortEx1(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR port,
IN ULONG offs
);
VOID
DDKFASTAPI
AtapiWriteBuffer4(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR _port,
IN PVOID Buffer,
IN ULONG Count,
IN ULONG Timing
);
VOID
DDKFASTAPI
AtapiWriteBuffer2(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR _port,
IN PVOID Buffer,
IN ULONG Count,
IN ULONG Timing
);
VOID
DDKFASTAPI
AtapiReadBuffer4(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR _port,
IN PVOID Buffer,
IN ULONG Count,
IN ULONG Timing
);
VOID
DDKFASTAPI
AtapiReadBuffer2(
IN PHW_CHANNEL chan,
IN ULONGIO_PTR _port,
IN PVOID Buffer,
IN ULONG Count,
IN ULONG Timing
);
/*#define GET_CHANNEL(Srb) (Srb->TargetId >> 1)
#define GET_LDEV(Srb) (Srb->TargetId)
#define GET_LDEV2(P, T, L) (T)*/
#define GET_CHANNEL(Srb) (Srb->PathId)
//#define GET_LDEV(Srb) (Srb->TargetId | (Srb->PathId << 1))
//#define GET_LDEV2(P, T, L) (T | ((P)<<1))
#define GET_CDEV(Srb) (Srb->TargetId)
VOID
NTAPI
AtapiSetupLunPtrs(
IN PHW_CHANNEL chan,
IN PHW_DEVICE_EXTENSION deviceExtension,
IN ULONG c
);
/*
#define AtapiSetupLunPtrs(chan, deviceExtension, c) \
{ \
chan->DeviceExtension = deviceExtension; \
chan->lChannel = c; \
chan->lun[0] = &(deviceExtension->lun[c*2+0]); \
chan->lun[1] = &(deviceExtension->lun[c*2+1]); \
chan->AltRegMap = deviceExtension->AltRegMap; \
chan->NextDpcChan = -1; \
chan->lun[0]->DeviceExtension = deviceExtension; \
chan->lun[1]->DeviceExtension = deviceExtension; \
}
*/
BOOLEAN
NTAPI
AtapiReadChipConfig(
IN PVOID HwDeviceExtension,
IN ULONG DeviceNumber,
IN ULONG channel // physical channel
);
VOID
NTAPI
UniataForgetDevice(
PHW_LU_EXTENSION LunExt
);
extern ULONG SkipRaids;
extern ULONG ForceSimplex;
extern BOOLEAN g_opt_AtapiDmaRawRead;
extern BOOLEAN hasPCI;
extern BOOLEAN InDriverEntry;
extern BOOLEAN g_Dump;
extern BOOLEAN g_opt_Verbose;
extern ULONG g_opt_VirtualMachine;
extern ULONG g_opt_WaitBusyResetCount;
extern ULONG CPU_num;
#define VM_AUTO 0x00
#define VM_NONE 0x01
#define VM_VBOX 0x02
#define VM_VMWARE 0x03
#define VM_QEMU 0x04
#define VM_BOCHS 0x05
#define VM_PCEM 0x06
#define VM_MAX_KNOWN VM_PCEM
extern BOOLEAN WinVer_WDM_Model;
#pragma pack(pop)
#endif //__IDE_BUSMASTER_H__
Reference in a new issue View git blame Copy permalink