Intravision/reactos
1
0
Fork 0
mirror of https://github.com/reactos/reactos.git synced 2024-11-20 06:15:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
reactos/drivers/filesystems/cdfs/deviosup.c
Victor Perevertkin 34593d933b
[FORMATTING][NTOS][HAL][DRIVERS][SDK] Fix trailing spaces
2021-06-11 15:33:08 +03:00

4195 lines
114 KiB
C
Raw Blame History

/*++
Copyright (c) 1989-2000 Microsoft Corporation
Module Name:
DevIoSup.c
Abstract:
This module implements the low lever disk read/write support for Cdfs.
--*/
#include "cdprocs.h"
//
// The Bug check file id for this module
//
#define BugCheckFileId (CDFS_BUG_CHECK_DEVIOSUP)
//
// Local structure definitions
//
//
// An array of these structures is passed to CdMultipleAsync describing
// a set of runs to execute in parallel.
//
typedef struct _IO_RUN {
//
// Disk offset to read from and number of bytes to read. These
// must be a multiple of 2048 and the disk offset is also a
// multiple of 2048.
//
LONGLONG DiskOffset;
ULONG DiskByteCount;
//
// Current position in user buffer. This is the final destination for
// this portion of the Io transfer.
//
PVOID UserBuffer;
//
// Buffer to perform the transfer to. If this is the same as the
// user buffer above then we are using the user's buffer. Otherwise
// we either allocated a temporary buffer or are using a different portion
// of the user's buffer.
//
// TransferBuffer - Read full sectors into this location. This can
// be a pointer into the user's buffer at the exact location the
// data should go. It can also be an earlier point in the user's
// buffer if the complete I/O doesn't start on a sector boundary.
// It may also be a pointer into an allocated buffer.
//
// TransferByteCount - Count of bytes to transfer to user's buffer. A
// value of zero indicates that we did do the transfer into the
// user's buffer directly.
//
// TransferBufferOffset - Offset in this buffer to begin the transfer
// to the user's buffer.
//
PVOID TransferBuffer;
ULONG TransferByteCount;
ULONG TransferBufferOffset;
//
// This is the Mdl describing the locked pages in memory. It may
// be allocated to describe the allocated buffer. Or it may be
// the Mdl in the originating Irp. The MdlOffset is the offset of
// the current buffer from the beginning of the buffer described by
// the Mdl below. If the TransferMdl is not the same as the Mdl
// in the user's Irp then we know we have allocated it.
//
PMDL TransferMdl;
PVOID TransferVirtualAddress;
//
// Associated Irp used to perform the Io.
//
PIRP SavedIrp;
} IO_RUN;
typedef IO_RUN *PIO_RUN;
#define MAX_PARALLEL_IOS 5
//
// Local support routines
//
_Requires_lock_held_(_Global_critical_region_)
BOOLEAN
CdPrepareBuffers (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIRP Irp,
_In_ PFCB Fcb,
_In_reads_bytes_(ByteCount) PVOID UserBuffer,
_In_ ULONG UserBufferOffset,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount,
_Out_ PIO_RUN IoRuns,
_Out_ PULONG RunCount,
_Out_ PULONG ThisByteCount
);
_Requires_lock_held_(_Global_critical_region_)
VOID
CdPrepareXABuffers (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIRP Irp,
_In_ PFCB Fcb,
_In_reads_bytes_(ByteCount) PVOID UserBuffer,
_In_ ULONG UserBufferOffset,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount,
_Out_ PIO_RUN IoRuns,
_Out_ PULONG RunCount,
_Out_ PULONG ThisByteCount
);
BOOLEAN
CdFinishBuffers (
_In_ PIRP_CONTEXT IrpContext,
_Inout_ PIO_RUN IoRuns,
_In_ ULONG RunCount,
_In_ BOOLEAN FinalCleanup,
_In_ BOOLEAN SaveXABuffer
);
_Requires_lock_held_(_Global_critical_region_)
VOID
CdMultipleAsync (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ ULONG RunCount,
_Inout_ PIO_RUN IoRuns
);
VOID
CdMultipleXAAsync (
_In_ PIRP_CONTEXT IrpContext,
_In_ ULONG RunCount,
_Inout_ PIO_RUN IoRuns,
_In_ PRAW_READ_INFO RawReads,
_In_ TRACK_MODE_TYPE TrackMode
);
_Requires_lock_held_(_Global_critical_region_)
VOID
CdSingleAsync (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIO_RUN Run,
_In_ PFCB Fcb
);
VOID
CdWaitSync (
_In_ PIRP_CONTEXT IrpContext
);
// Tell prefast this is a completion routine.
IO_COMPLETION_ROUTINE CdMultiSyncCompletionRoutine;
// Tell prefast this is a completion routine
IO_COMPLETION_ROUTINE CdMultiAsyncCompletionRoutine;
// Tell prefast this is a completion routine
IO_COMPLETION_ROUTINE CdSingleSyncCompletionRoutine;
// Tell prefast this is a completion routine
IO_COMPLETION_ROUTINE CdSingleAsyncCompletionRoutine;
_When_(SafeNodeType(Fcb) != CDFS_NTC_FCB_PATH_TABLE && StartingOffset == 0, _At_(ByteCount, _In_range_(>=, CdAudioDirentSize + sizeof(RAW_DIRENT))))
_When_(SafeNodeType(Fcb) != CDFS_NTC_FCB_PATH_TABLE && StartingOffset != 0, _At_(ByteCount, _In_range_(>=, CdAudioDirentSize + SECTOR_SIZE)))
VOID
CdReadAudioSystemFile (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ LONGLONG StartingOffset,
_In_ _In_range_(>=, CdAudioDirentSize) ULONG ByteCount,
_Out_writes_bytes_(ByteCount) PVOID SystemBuffer
);
_Requires_lock_held_(_Global_critical_region_)
BOOLEAN
CdReadDirDataThroughCache (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIO_RUN Run
);
#ifdef ALLOC_PRAGMA
#pragma alloc_text(PAGE, CdCreateUserMdl)
#pragma alloc_text(PAGE, CdMultipleAsync)
#pragma alloc_text(PAGE, CdMultipleXAAsync)
#pragma alloc_text(PAGE, CdNonCachedRead)
#pragma alloc_text(PAGE, CdNonCachedXARead)
#pragma alloc_text(PAGE, CdVolumeDasdWrite)
#pragma alloc_text(PAGE, CdFinishBuffers)
#pragma alloc_text(PAGE, CdPerformDevIoCtrl)
#pragma alloc_text(PAGE, CdPerformDevIoCtrlEx)
#pragma alloc_text(PAGE, CdPrepareBuffers)
#pragma alloc_text(PAGE, CdPrepareXABuffers)
#pragma alloc_text(PAGE, CdReadAudioSystemFile)
#pragma alloc_text(PAGE, CdReadSectors)
#pragma alloc_text(PAGE, CdSingleAsync)
#pragma alloc_text(PAGE, CdWaitSync)
#pragma alloc_text(PAGE, CdReadDirDataThroughCache)
#pragma alloc_text(PAGE, CdFreeDirCache)
#pragma alloc_text(PAGE, CdLbnToMmSsFf)
#pragma alloc_text(PAGE, CdHijackIrpAndFlushDevice)
#endif
VOID
CdLbnToMmSsFf (
_In_ ULONG Blocks,
_Out_writes_(3) PUCHAR Msf
)
/*++
Routine Description:
Convert Lbn to MSF format.
Arguments:
Msf - on output, set to 0xMmSsFf representation of blocks.
--*/
{
PAGED_CODE();
Blocks += 150; // Lbn 0 == 00:02:00, 1sec == 75 frames.
Msf[0] = (UCHAR)(Blocks % 75); // Frames
Blocks /= 75; // -> Seconds
Msf[1] = (UCHAR)(Blocks % 60); // Seconds
Blocks /= 60; // -> Minutes
Msf[2] = (UCHAR)Blocks; // Minutes
}
__inline
TRACK_MODE_TYPE
CdFileTrackMode (
_In_ PFCB Fcb
)
/*++
Routine Description:
This routine converts FCB XA file type flags to the track mode
used by the device drivers.
Arguments:
Fcb - Fcb representing the file to read.
Return Value:
TrackMode of the file represented by the Fcb.
--*/
{
NT_ASSERT( FlagOn( Fcb->FcbState, FCB_STATE_MODE2FORM2_FILE |
FCB_STATE_MODE2_FILE |
FCB_STATE_DA_FILE ));
if (FlagOn( Fcb->FcbState, FCB_STATE_MODE2FORM2_FILE )) {
return XAForm2;
} else if (FlagOn( Fcb->FcbState, FCB_STATE_DA_FILE )) {
return CDDA;
}
//
// FCB_STATE_MODE2_FILE
//
return YellowMode2;
}
_Requires_lock_held_(_Global_critical_region_)
NTSTATUS
CdNonCachedRead (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount
)
/*++
Routine Description:
This routine performs the non-cached reads to 'cooked' sectors (2048 bytes
per sector). This is done by performing the following in a loop.
Fill in the IoRuns array for the next block of Io.
Send the Io to the device.
Perform any cleanup on the Io runs array.
We will not do async Io to any request that generates non-aligned Io.
Also we will not perform async Io if it will exceed the size of our
IoRuns array. These should be the unusual cases but we will raise
or return CANT_WAIT in this routine if we detect this case.
Arguments:
Fcb - Fcb representing the file to read.
StartingOffset - Logical offset in the file to read from.
ByteCount - Number of bytes to read.
Return Value:
NTSTATUS - Status indicating the result of the operation.
--*/
{
NTSTATUS Status = STATUS_SUCCESS;
IO_RUN IoRuns[MAX_PARALLEL_IOS];
ULONG RunCount = 0;
ULONG CleanupRunCount = 0;
PVOID UserBuffer;
ULONG UserBufferOffset = 0;
LONGLONG CurrentOffset = StartingOffset;
ULONG RemainingByteCount = ByteCount;
ULONG ThisByteCount;
BOOLEAN Unaligned;
BOOLEAN FlushIoBuffers = FALSE;
BOOLEAN FirstPass = TRUE;
PAGED_CODE();
//
// We want to make sure the user's buffer is locked in all cases.
//
if (IrpContext->Irp->MdlAddress == NULL) {
CdCreateUserMdl( IrpContext, ByteCount, TRUE, IoWriteAccess );
}
CdMapUserBuffer( IrpContext, &UserBuffer);
//
// Special case the root directory and path table for a music volume.
//
if (FlagOn( Fcb->Vcb->VcbState, VCB_STATE_AUDIO_DISK ) &&
((SafeNodeType( Fcb ) == CDFS_NTC_FCB_INDEX) ||
(SafeNodeType( Fcb ) == CDFS_NTC_FCB_PATH_TABLE))) {
CdReadAudioSystemFile( IrpContext,
Fcb,
StartingOffset,
ByteCount,
UserBuffer );
return STATUS_SUCCESS;
}
//
// If we're going to use the sector cache for this request, then
// mark the request waitable.
//
if ((SafeNodeType( Fcb) == CDFS_NTC_FCB_INDEX) &&
(NULL != Fcb->Vcb->SectorCacheBuffer) &&
(VcbMounted == IrpContext->Vcb->VcbCondition)) {
if (!FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT)) {
KeInitializeEvent( &IrpContext->IoContext->SyncEvent,
NotificationEvent,
FALSE );
SetFlag( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT);
}
}
//
// Use a try-finally to perform the final cleanup.
//
_SEH2_TRY {
//
// Loop while there are more bytes to transfer.
//
do {
//
// Call prepare buffers to set up the next entries
// in the IoRuns array. Remember if there are any
// unaligned entries. This routine will raise CANT_WAIT
// if there are unaligned entries for an async request.
//
RtlZeroMemory( IoRuns, sizeof( IoRuns ));
Unaligned = CdPrepareBuffers( IrpContext,
IrpContext->Irp,
Fcb,
UserBuffer,
UserBufferOffset,
CurrentOffset,
RemainingByteCount,
IoRuns,
&CleanupRunCount,
&ThisByteCount );
RunCount = CleanupRunCount;
//
// If this is an async request and there aren't enough entries
// in the Io array then post the request.
//
if ((ThisByteCount < RemainingByteCount) &&
!FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
CdRaiseStatus( IrpContext, STATUS_CANT_WAIT );
}
//
// If the entire Io is contained in a single run then
// we can pass the Io down to the driver. Send the driver down
// and wait on the result if this is synchronous.
//
if ((RunCount == 1) && !Unaligned && FirstPass) {
CdSingleAsync( IrpContext,&IoRuns[0], Fcb );
//
// No cleanup needed for the IoRuns array here.
//
CleanupRunCount = 0;
//
// Wait if we are synchronous, otherwise return
//
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
CdWaitSync( IrpContext );
Status = IrpContext->Irp->IoStatus.Status;
//
// Our completion routine will free the Io context but
// we do want to return STATUS_PENDING.
//
} else {
ClearFlag( IrpContext->Flags, IRP_CONTEXT_FLAG_ALLOC_IO );
Status = STATUS_PENDING;
}
try_return( NOTHING );
}
//
// Otherwise we will perform multiple Io to read in the data.
//
CdMultipleAsync( IrpContext, Fcb, RunCount, IoRuns );
//
// If this is a synchronous request then perform any necessary
// post-processing.
//
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
//
// Wait for the request to complete.
//
CdWaitSync( IrpContext );
Status = IrpContext->Irp->IoStatus.Status;
//
// Exit this loop if there is an error.
//
if (!NT_SUCCESS( Status )) {
try_return( NOTHING );
}
//
// Perform post read operations on the IoRuns if
// necessary.
//
if (Unaligned &&
CdFinishBuffers( IrpContext, IoRuns, RunCount, FALSE, FALSE )) {
FlushIoBuffers = TRUE;
}
CleanupRunCount = 0;
//
// Exit this loop if there are no more bytes to transfer
// or we have any error.
//
RemainingByteCount -= ThisByteCount;
CurrentOffset += ThisByteCount;
UserBuffer = Add2Ptr( UserBuffer, ThisByteCount, PVOID );
UserBufferOffset += ThisByteCount;
//
// Otherwise this is an asynchronous request. Always return
// STATUS_PENDING.
//
} else {
ClearFlag( IrpContext->Flags, IRP_CONTEXT_FLAG_ALLOC_IO );
CleanupRunCount = 0;
try_return( Status = STATUS_PENDING );
break;
}
FirstPass = FALSE;
} while (RemainingByteCount != 0);
//
// Flush the hardware cache if we performed any copy operations.
//
if (FlushIoBuffers) {
KeFlushIoBuffers( IrpContext->Irp->MdlAddress, TRUE, FALSE );
}
try_exit: NOTHING;
} _SEH2_FINALLY {
//
// Perform final cleanup on the IoRuns if necessary.
//
if (CleanupRunCount != 0) {
CdFinishBuffers( IrpContext, IoRuns, CleanupRunCount, TRUE, FALSE );
}
} _SEH2_END;
return Status;
}
_Requires_lock_held_(_Global_critical_region_)
NTSTATUS
CdNonCachedXARead (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount
)
/*++
Routine Description:
This routine performs the non-cached reads for 'raw' sectors (2352 bytes
per sector). We also prepend a hard-coded RIFF header of 44 bytes to the file.
All of this is already reflected in the file size.
We start by checking whether to prepend any portion of the RIFF header. Then we check
if the last raw sector read was from the beginning portion of this file, deallocating
that buffer if necessary. Finally we do the following in a loop.
Fill the IoRuns array for the next block of Io.
Send the Io to the device driver.
Perform any cleanup necessary on the IoRuns array.
We will not do any async request in this path. The request would have been
posted to a worker thread before getting to this point.
Arguments:
Fcb - Fcb representing the file to read.
StartingOffset - Logical offset in the file to read from.
ByteCount - Number of bytes to read.
Return Value:
NTSTATUS - Status indicating the result of the operation.
--*/
{
NTSTATUS Status = STATUS_SUCCESS;
RIFF_HEADER LocalRiffHeader;
PRIFF_HEADER RiffHeader;
RAW_READ_INFO RawReads[MAX_PARALLEL_IOS];
IO_RUN IoRuns[MAX_PARALLEL_IOS];
ULONG RunCount = 0;
ULONG CleanupRunCount = 0;
PVOID UserBuffer;
ULONG UserBufferOffset = 0;
LONGLONG CurrentOffset = StartingOffset;
ULONG RemainingByteCount = ByteCount;
ULONG ThisByteCount = 0;
ULONG Address = 0;
BOOLEAN TryingYellowbookMode2 = FALSE;
TRACK_MODE_TYPE TrackMode;
PAGED_CODE();
//
// We want to make sure the user's buffer is locked in all cases.
//
if (IrpContext->Irp->MdlAddress == NULL) {
CdCreateUserMdl( IrpContext, ByteCount, TRUE, IoWriteAccess );
}
//
// The byte count was rounded up to a logical sector boundary. It has
// nothing to do with the raw sectors on disk. Limit the remaining
// byte count to file size.
//
if (CurrentOffset + RemainingByteCount > Fcb->FileSize.QuadPart) {
RemainingByteCount = (ULONG) (Fcb->FileSize.QuadPart - CurrentOffset);
}
CdMapUserBuffer( IrpContext, &UserBuffer);
//
// Use a try-finally to perform the final cleanup.
//
_SEH2_TRY {
//
// If the initial offset lies within the RIFF header then copy the
// necessary bytes to the user's buffer.
//
if (CurrentOffset < sizeof( RIFF_HEADER )) {
//
// Copy the appropriate RIFF header.
//
if (FlagOn( Fcb->FcbState, FCB_STATE_DA_FILE )) {
//
// Create the pseudo entries for a music disk.
//
if (FlagOn( Fcb->Vcb->VcbState, VCB_STATE_AUDIO_DISK )) {
PAUDIO_PLAY_HEADER AudioPlayHeader;
PTRACK_DATA TrackData;
AudioPlayHeader = (PAUDIO_PLAY_HEADER) &LocalRiffHeader;
TrackData = &Fcb->Vcb->CdromToc->TrackData[Fcb->XAFileNumber];
//
// Copy the data header into our local buffer.
//
RtlCopyMemory( AudioPlayHeader,
CdAudioPlayHeader,
sizeof( AUDIO_PLAY_HEADER ));
//
// Copy the serial number into the Id field. Also
// the track number in the TOC.
//
AudioPlayHeader->DiskID = Fcb->Vcb->Vpb->SerialNumber;
AudioPlayHeader->TrackNumber = TrackData->TrackNumber;
//
// One frame == One sector.
// One second == 75 frames (winds up being a 44.1khz sample)
//
// Note: LBN 0 == 0:2:0 (MSF)
//
//
// Fill in the address (both MSF and Lbn format) and length fields.
//
SwapCopyUchar4( &Address, TrackData->Address);
CdLbnToMmSsFf( Address, AudioPlayHeader->TrackAddress);
SwapCopyUchar4( &AudioPlayHeader->StartingSector, TrackData->Address);
//
// Go to the next track and find the starting point.
//
TrackData = &Fcb->Vcb->CdromToc->TrackData[Fcb->XAFileNumber + 1];
SwapCopyUchar4( &AudioPlayHeader->SectorCount, TrackData->Address);
//
// Now compute the difference. If there is an error then use
// a length of zero.
//
if (AudioPlayHeader->SectorCount < AudioPlayHeader->StartingSector) {
AudioPlayHeader->SectorCount = 0;
} else {
AudioPlayHeader->SectorCount -= AudioPlayHeader->StartingSector;
}
//
// Use the sector count to determine the MSF length. Bias by 150 to make
// it an "lbn" since the conversion routine corrects for Lbn 0 == 0:2:0;
//
Address = AudioPlayHeader->SectorCount - 150;
CdLbnToMmSsFf( Address, AudioPlayHeader->TrackLength);
ThisByteCount = sizeof( RIFF_HEADER ) - (ULONG) CurrentOffset;
RtlCopyMemory( UserBuffer,
Add2Ptr( AudioPlayHeader,
sizeof( RIFF_HEADER ) - ThisByteCount,
PCHAR ),
ThisByteCount );
//
// CD-XA CDDA
//
} else {
//
// The WAVE header format is actually much closer to an audio play
// header in format but we only need to modify the filesize fields.
//
RiffHeader = &LocalRiffHeader;
//
// Copy the data header into our local buffer and add the file size to it.
//
RtlCopyMemory( RiffHeader,
CdXAAudioPhileHeader,
sizeof( RIFF_HEADER ));
RiffHeader->ChunkSize += Fcb->FileSize.LowPart;
RiffHeader->RawSectors += Fcb->FileSize.LowPart;
ThisByteCount = sizeof( RIFF_HEADER ) - (ULONG) CurrentOffset;
RtlCopyMemory( UserBuffer,
Add2Ptr( RiffHeader,
sizeof( RIFF_HEADER ) - ThisByteCount,
PCHAR ),
ThisByteCount );
}
//
// CD-XA non-audio
//
} else {
NT_ASSERT( FlagOn( Fcb->FcbState, FCB_STATE_MODE2_FILE | FCB_STATE_MODE2FORM2_FILE ));
RiffHeader = &LocalRiffHeader;
//
// Copy the data header into our local buffer and add the file size to it.
//
RtlCopyMemory( RiffHeader,
CdXAFileHeader,
sizeof( RIFF_HEADER ));
RiffHeader->ChunkSize += Fcb->FileSize.LowPart;
RiffHeader->RawSectors += Fcb->FileSize.LowPart;
RiffHeader->Attributes = (USHORT) Fcb->XAAttributes;
RiffHeader->FileNumber = (UCHAR) Fcb->XAFileNumber;
ThisByteCount = sizeof( RIFF_HEADER ) - (ULONG) CurrentOffset;
RtlCopyMemory( UserBuffer,
Add2Ptr( RiffHeader,
sizeof( RIFF_HEADER ) - ThisByteCount,
PCHAR ),
ThisByteCount );
}
//
// Adjust the starting offset and byte count to reflect that
// we copied over the RIFF bytes.
//
UserBuffer = Add2Ptr( UserBuffer, ThisByteCount, PVOID );
UserBufferOffset += ThisByteCount;
CurrentOffset += ThisByteCount;
RemainingByteCount -= ThisByteCount;
}
//
// Set up the appropriate trackmode
//
TrackMode = CdFileTrackMode(Fcb);
//
// Loop while there are more bytes to transfer.
//
while (RemainingByteCount != 0) {
//
// Call prepare buffers to set up the next entries
// in the IoRuns array. Remember if there are any
// unaligned entries. If we're just retrying the previous
// runs with a different track mode, then don't do anything here.
//
if (!TryingYellowbookMode2) {
RtlZeroMemory( IoRuns, sizeof( IoRuns ));
RtlZeroMemory( RawReads, sizeof( RawReads ));
CdPrepareXABuffers( IrpContext,
IrpContext->Irp,
Fcb,
UserBuffer,
UserBufferOffset,
CurrentOffset,
RemainingByteCount,
IoRuns,
&CleanupRunCount,
&ThisByteCount );
}
//
// Perform multiple Io to read in the data. Note that
// there may be no Io to do if we were able to use an
// existing buffer from the Vcb.
//
if (CleanupRunCount != 0) {
RunCount = CleanupRunCount;
CdMultipleXAAsync( IrpContext,
RunCount,
IoRuns,
RawReads,
TrackMode );
//
// Wait for the request to complete.
//
CdWaitSync( IrpContext );
Status = IrpContext->Irp->IoStatus.Status;
//
// Exit this loop if there is an error.
//
if (!NT_SUCCESS( Status )) {
if (!TryingYellowbookMode2 &&
FlagOn( Fcb->FcbState, FCB_STATE_MODE2FORM2_FILE )) {
//
// There are wacky cases where someone has mastered as CD-XA
// but the sectors they claim are Mode2Form2 are really, according
// to ATAPI devices, Yellowbook Mode2. We will try once more
// with these. Kodak PHOTO-CD has been observed to do this.
//
TryingYellowbookMode2 = TRUE;
TrackMode = YellowMode2;
//
// Clear our 'cumulative' error status value
//
IrpContext->IoContext->Status = STATUS_SUCCESS;
continue;
}
try_return( NOTHING );
}
CleanupRunCount = 0;
if (TryingYellowbookMode2) {
//
// We succesfully got data when we tried switching the trackmode,
// so change the state of the FCB to remember that.
//
SetFlag( Fcb->FcbState, FCB_STATE_MODE2_FILE );
ClearFlag( Fcb->FcbState, FCB_STATE_MODE2FORM2_FILE );
TryingYellowbookMode2 = FALSE;
}
//
// Perform post read operations on the IoRuns if
// necessary.
//
CdFinishBuffers( IrpContext, IoRuns, RunCount, FALSE, TRUE );
}
//
// Adjust our loop variants.
//
RemainingByteCount -= ThisByteCount;
CurrentOffset += ThisByteCount;
UserBuffer = Add2Ptr( UserBuffer, ThisByteCount, PVOID );
UserBufferOffset += ThisByteCount;
}
//
// Always flush the hardware cache.
//
KeFlushIoBuffers( IrpContext->Irp->MdlAddress, TRUE, FALSE );
try_exit: NOTHING;
} _SEH2_FINALLY {
//
// Perform final cleanup on the IoRuns if necessary.
//
if (CleanupRunCount != 0) {
CdFinishBuffers( IrpContext, IoRuns, CleanupRunCount, TRUE, FALSE );
}
} _SEH2_END;
return Status;
}
_Requires_lock_held_(_Global_critical_region_)
NTSTATUS
CdVolumeDasdWrite (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount
)
/*++
Routine Description:
This routine performs the non-cached writes to 'cooked' sectors (2048 bytes
per sector). This is done by filling the IoRun for the desired request
and send it down to the device.
Arguments:
Fcb - Fcb representing the file to read.
StartingOffset - Logical offset in the file to read from.
ByteCount - Number of bytes to read.
Return Value:
NTSTATUS - Status indicating the result of the operation.
--*/
{
NTSTATUS Status;
IO_RUN IoRun;
PAGED_CODE();
//
// We want to make sure the user's buffer is locked in all cases.
//
CdLockUserBuffer( IrpContext, ByteCount, IoReadAccess );
//
// The entire Io can be contained in a single run, just pass
// the Io down to the driver. Send the driver down
// and wait on the result if this is synchronous.
//
RtlZeroMemory( &IoRun, sizeof( IoRun ) );
IoRun.DiskOffset = StartingOffset;
IoRun.DiskByteCount = ByteCount;
CdSingleAsync( IrpContext, &IoRun, Fcb );
//
// Wait if we are synchronous, otherwise return
//
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
CdWaitSync( IrpContext );
Status = IrpContext->Irp->IoStatus.Status;
//
// Our completion routine will free the Io context but
// we do want to return STATUS_PENDING.
//
} else {
ClearFlag( IrpContext->Flags, IRP_CONTEXT_FLAG_ALLOC_IO );
Status = STATUS_PENDING;
}
return Status;
}
BOOLEAN
CdReadSectors (
_In_ PIRP_CONTEXT IrpContext,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount,
_In_ BOOLEAN ReturnError,
_Out_writes_bytes_(ByteCount) PVOID Buffer,
_In_ PDEVICE_OBJECT TargetDeviceObject
)
/*++
Routine Description:
This routine is called to transfer sectors from the disk to a
specified buffer. It is used for mount and volume verify operations.
This routine is synchronous, it will not return until the operation
is complete or until the operation fails.
The routine allocates an IRP and then passes this IRP to a lower
level driver. Errors may occur in the allocation of this IRP or
in the operation of the lower driver.
Arguments:
StartingOffset - Logical offset on the disk to start the read. This
must be on a sector boundary, no check is made here.
ByteCount - Number of bytes to read. This is an integral number of
2K sectors, no check is made here to confirm this.
ReturnError - Indicates whether we should return TRUE or FALSE
to indicate an error or raise an error condition. This only applies
to the result of the IO. Any other error may cause a raise.
Buffer - Buffer to transfer the disk data into.
TargetDeviceObject - The device object for the volume to be read.
Return Value:
BOOLEAN - Depending on 'RaiseOnError' flag above. TRUE if operation
succeeded, FALSE otherwise.
--*/
{
NTSTATUS Status;
KEVENT Event;
PIRP Irp;
PAGED_CODE();
//
// Initialize the event.
//
KeInitializeEvent( &Event, NotificationEvent, FALSE );
//
// Attempt to allocate the IRP. If unsuccessful, raise
// STATUS_INSUFFICIENT_RESOURCES.
//
Irp = IoBuildSynchronousFsdRequest( IRP_MJ_READ,
TargetDeviceObject,
Buffer,
ByteCount,
(PLARGE_INTEGER) &StartingOffset,
&Event,
&IrpContext->Irp->IoStatus );
if (Irp == NULL) {
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
//
// Ignore the change line (verify) for mount and verify requests
//
SetFlag( IoGetNextIrpStackLocation( Irp )->Flags, SL_OVERRIDE_VERIFY_VOLUME );
//
// Send the request down to the driver. If an error occurs return
// it to the caller.
//
Status = IoCallDriver( TargetDeviceObject, Irp );
//
// If the status was STATUS_PENDING then wait on the event.
//
if (Status == STATUS_PENDING) {
Status = KeWaitForSingleObject( &Event,
Executive,
KernelMode,
FALSE,
NULL );
//
// On a successful wait pull the status out of the IoStatus block.
//
if (NT_SUCCESS( Status )) {
Status = IrpContext->Irp->IoStatus.Status;
}
}
//
// Check whether we should raise in the error case.
//
if (!NT_SUCCESS( Status )) {
if (!ReturnError) {
CdNormalizeAndRaiseStatus( IrpContext, Status );
}
//
// We don't raise, but return FALSE to indicate an error.
//
return FALSE;
//
// The operation completed successfully.
//
} else {
return TRUE;
}
}
NTSTATUS
CdCreateUserMdl (
_In_ PIRP_CONTEXT IrpContext,
_In_ ULONG BufferLength,
_In_ BOOLEAN RaiseOnError,
_In_ LOCK_OPERATION Operation
)
/*++
Routine Description:
This routine locks the specified buffer for read access (we only write into
the buffer). The file system requires this routine since it does not
ask the I/O system to lock its buffers for direct I/O. This routine
may only be called from the Fsd while still in the user context.
This routine is only called if there is not already an Mdl.
Arguments:
BufferLength - Length of user buffer.
RaiseOnError - Indicates if our caller wants this routine to raise on
an error condition.
Operation - IoWriteAccess or IoReadAccess
Return Value:
NTSTATUS - Status from this routine. Error status only returned if
RaiseOnError is FALSE.
--*/
{
NTSTATUS Status = STATUS_INSUFFICIENT_RESOURCES;
PMDL Mdl;
PAGED_CODE();
UNREFERENCED_PARAMETER( Operation );
UNREFERENCED_PARAMETER( IrpContext );
ASSERT_IRP_CONTEXT( IrpContext );
ASSERT_IRP( IrpContext->Irp );
NT_ASSERT( IrpContext->Irp->MdlAddress == NULL );
//
// Allocate the Mdl, and Raise if we fail.
//
Mdl = IoAllocateMdl( IrpContext->Irp->UserBuffer,
BufferLength,
FALSE,
FALSE,
IrpContext->Irp );
if (Mdl != NULL) {
//
// Now probe the buffer described by the Irp. If we get an exception,
// deallocate the Mdl and return the appropriate "expected" status.
//
_SEH2_TRY {
MmProbeAndLockPages( Mdl, IrpContext->Irp->RequestorMode, IoWriteAccess );
Status = STATUS_SUCCESS;
#ifdef _MSC_VER
#pragma warning(suppress: 6320)
#endif
} _SEH2_EXCEPT(EXCEPTION_EXECUTE_HANDLER) {
Status = _SEH2_GetExceptionCode();
IoFreeMdl( Mdl );
IrpContext->Irp->MdlAddress = NULL;
if (!FsRtlIsNtstatusExpected( Status )) {
Status = STATUS_INVALID_USER_BUFFER;
}
} _SEH2_END;
}
//
// Check if we are to raise or return
//
if (Status != STATUS_SUCCESS) {
if (RaiseOnError) {
CdRaiseStatus( IrpContext, Status );
}
}
//
// Return the status code.
//
return Status;
}
NTSTATUS
CdPerformDevIoCtrlEx (
_In_ PIRP_CONTEXT IrpContext,
_In_ ULONG IoControlCode,
_In_ PDEVICE_OBJECT Device,
_In_reads_bytes_opt_(InputBufferLength) PVOID InputBuffer,
_In_ ULONG InputBufferLength,
_Out_writes_bytes_opt_(OutputBufferLength) PVOID OutputBuffer,
_In_ ULONG OutputBufferLength,
_In_ BOOLEAN InternalDeviceIoControl,
_In_ BOOLEAN OverrideVerify,
_Out_opt_ PIO_STATUS_BLOCK Iosb
)
/*++
Routine Description:
This routine is called to perform DevIoCtrl functions internally within
the filesystem. We take the status from the driver and return it to our
caller.
Arguments:
IoControlCode - Code to send to driver.
Device - This is the device to send the request to.
OutPutBuffer - Pointer to output buffer.
OutputBufferLength - Length of output buffer above.
InternalDeviceIoControl - Indicates if this is an internal or external
Io control code.
OverrideVerify - Indicates if we should tell the driver not to return
STATUS_VERIFY_REQUIRED for mount and verify.
Iosb - If specified, we return the results of the operation here.
Return Value:
NTSTATUS - Status returned by next lower driver.
--*/
{
NTSTATUS Status;
PIRP Irp;
KEVENT Event;
IO_STATUS_BLOCK LocalIosb;
PIO_STATUS_BLOCK IosbToUse = &LocalIosb;
PAGED_CODE();
UNREFERENCED_PARAMETER( IrpContext );
//
// Check if the user gave us an Iosb.
//
if (ARGUMENT_PRESENT( Iosb )) {
IosbToUse = Iosb;
}
IosbToUse->Status = 0;
IosbToUse->Information = 0;
KeInitializeEvent( &Event, NotificationEvent, FALSE );
Irp = IoBuildDeviceIoControlRequest( IoControlCode,
Device,
InputBuffer,
InputBufferLength,
OutputBuffer,
OutputBufferLength,
InternalDeviceIoControl,
&Event,
IosbToUse );
if (Irp == NULL) {
return STATUS_INSUFFICIENT_RESOURCES;
}
if (OverrideVerify) {
SetFlag( IoGetNextIrpStackLocation( Irp )->Flags, SL_OVERRIDE_VERIFY_VOLUME );
}
Status = IoCallDriver( Device, Irp );
//
// We check for device not ready by first checking Status
// and then if status pending was returned, the Iosb status
// value.
//
if (Status == STATUS_PENDING) {
(VOID) KeWaitForSingleObject( &Event,
Executive,
KernelMode,
FALSE,
(PLARGE_INTEGER)NULL );
Status = IosbToUse->Status;
}
NT_ASSERT( !(OverrideVerify && (STATUS_VERIFY_REQUIRED == Status)));
return Status;
}
NTSTATUS
FASTCALL
CdPerformDevIoCtrl (
_In_ PIRP_CONTEXT IrpContext,
_In_ ULONG IoControlCode,
_In_ PDEVICE_OBJECT Device,
_Out_writes_bytes_opt_(OutputBufferLength) PVOID OutputBuffer,
_In_ ULONG OutputBufferLength,
_In_ BOOLEAN InternalDeviceIoControl,
_In_ BOOLEAN OverrideVerify,
_Out_opt_ PIO_STATUS_BLOCK Iosb
)
{
PAGED_CODE();
return CdPerformDevIoCtrlEx( IrpContext,
IoControlCode,
Device,
NULL,
0,
OutputBuffer,
OutputBufferLength,
InternalDeviceIoControl,
OverrideVerify,
Iosb);
}
//
// Local support routine
//
_Requires_lock_held_(_Global_critical_region_)
BOOLEAN
CdPrepareBuffers (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIRP Irp,
_In_ PFCB Fcb,
_In_reads_bytes_(ByteCount) PVOID UserBuffer,
_In_ ULONG UserBufferOffset,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount,
_Out_ PIO_RUN IoRuns,
_Out_ PULONG RunCount,
_Out_ PULONG ThisByteCount
)
/*++
Routine Description:
This routine is the worker routine which looks up each run of an IO
request and stores an entry for it in the IoRuns array. If the run
begins on an unaligned disk boundary then we will allocate a buffer
and Mdl for the unaligned portion and put it in the IoRuns entry.
This routine will raise CANT_WAIT if an unaligned transfer is encountered
and this request can't wait.
Arguments:
Irp - Originating Irp for this request.
Fcb - This is the Fcb for this data stream. It may be a file, directory,
path table or the volume file.
UserBuffer - Current position in the user's buffer.
UserBufferOffset - Offset from the start of the original user buffer.
StartingOffset - Offset in the stream to begin the read.
ByteCount - Number of bytes to read. We will fill the IoRuns array up
to this point. We will stop early if we exceed the maximum number
of parallel Ios we support.
IoRuns - Pointer to the IoRuns array. The entire array is zeroes when
this routine is called.
RunCount - Number of entries in the IoRuns array filled here.
ThisByteCount - Number of bytes described by the IoRun entries. Will
not exceed the ByteCount passed in.
Return Value:
BOOLEAN - TRUE if one of the entries in an unaligned buffer (provided
this is synchronous). FALSE otherwise.
--*/
{
BOOLEAN FoundUnaligned = FALSE;
PIO_RUN ThisIoRun = IoRuns;
//
// Following indicate where we are in the current transfer. Current
// position in the file and number of bytes yet to transfer from
// this position.
//
ULONG RemainingByteCount = ByteCount;
LONGLONG CurrentFileOffset = StartingOffset;
//
// Following indicate the state of the user's buffer. We have
// the destination of the next transfer and its offset in the
// buffer. We also have the next available position in the buffer
// available for a scratch buffer. We will align this up to a sector
// boundary.
//
PVOID CurrentUserBuffer = UserBuffer;
ULONG CurrentUserBufferOffset = UserBufferOffset;
//
// The following is the next contiguous bytes on the disk to
// transfer. Read from the allocation package.
//
LONGLONG DiskOffset = 0;
ULONG CurrentByteCount = RemainingByteCount;
PAGED_CODE();
//
// Initialize the RunCount and ByteCount.
//
*RunCount = 0;
*ThisByteCount = 0;
//
// Loop while there are more bytes to process or there are
// available entries in the IoRun array.
//
while (TRUE) {
*RunCount += 1;
//
// Initialize the current position in the IoRuns array.
// Find the user's buffer for this portion of the transfer.
//
ThisIoRun->UserBuffer = CurrentUserBuffer;
//
// Find the allocation information for the current offset in the
// stream.
//
CdLookupAllocation( IrpContext,
Fcb,
CurrentFileOffset,
&DiskOffset,
&CurrentByteCount );
//
// Limit ourselves to the data requested.
//
if (CurrentByteCount > RemainingByteCount) {
CurrentByteCount = RemainingByteCount;
}
//
// Handle the case where this is an unaligned transfer. The
// following must all be true for this to be an aligned transfer.
//
// Disk offset on a 2048 byte boundary (Start of transfer)
//
// Byte count is a multiple of 2048 (Length of transfer)
//
// If the ByteCount is at least one sector then do the
// unaligned transfer only for the tail. We can use the
// user's buffer for the aligned portion.
//
if (FlagOn( (ULONG) DiskOffset, SECTOR_MASK ) ||
(FlagOn( (ULONG) CurrentByteCount, SECTOR_MASK ) &&
(CurrentByteCount < SECTOR_SIZE))) {
NT_ASSERT( SafeNodeType(Fcb) != CDFS_NTC_FCB_INDEX);
//
// If we can't wait then raise.
//
if (!FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
CdRaiseStatus( IrpContext, STATUS_CANT_WAIT );
}
//
// Remember the offset and the number of bytes out of
// the transfer buffer to copy into the user's buffer.
// We will truncate the current read to end on a sector
// boundary.
//
ThisIoRun->TransferBufferOffset = SectorOffset( DiskOffset );
//
// Make sure this transfer ends on a sector boundary.
//
ThisIoRun->DiskOffset = LlSectorTruncate( DiskOffset );
//
// We need to allocate an auxilary buffer for the next sector.
// Read up to a page containing the partial data.
//
ThisIoRun->DiskByteCount = SectorAlign( ThisIoRun->TransferBufferOffset + CurrentByteCount );
if (ThisIoRun->DiskByteCount > PAGE_SIZE) {
ThisIoRun->DiskByteCount = PAGE_SIZE;
}
if (ThisIoRun->TransferBufferOffset + CurrentByteCount > ThisIoRun->DiskByteCount) {
CurrentByteCount = ThisIoRun->DiskByteCount - ThisIoRun->TransferBufferOffset;
}
ThisIoRun->TransferByteCount = CurrentByteCount;
//
// Allocate a buffer for the non-aligned transfer.
//
ThisIoRun->TransferBuffer = FsRtlAllocatePoolWithTag( CdNonPagedPool, PAGE_SIZE, TAG_IO_BUFFER );
//
// Allocate and build the Mdl to describe this buffer.
//
ThisIoRun->TransferMdl = IoAllocateMdl( ThisIoRun->TransferBuffer,
PAGE_SIZE,
FALSE,
FALSE,
NULL );
ThisIoRun->TransferVirtualAddress = ThisIoRun->TransferBuffer;
if (ThisIoRun->TransferMdl == NULL) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
MmBuildMdlForNonPagedPool( ThisIoRun->TransferMdl );
//
// Remember we found an unaligned transfer.
//
FoundUnaligned = TRUE;
//
// Otherwise we use the buffer and Mdl from the original request.
//
} else {
//
// Truncate the read length to a sector-aligned value. We know
// the length must be at least one sector or we wouldn't be
// here now.
//
CurrentByteCount = SectorTruncate( CurrentByteCount );
//
// Read these sectors from the disk.
//
ThisIoRun->DiskOffset = DiskOffset;
ThisIoRun->DiskByteCount = CurrentByteCount;
//
// Use the user's buffer and Mdl as our transfer buffer
// and Mdl.
//
ThisIoRun->TransferBuffer = CurrentUserBuffer;
ThisIoRun->TransferMdl = Irp->MdlAddress;
ThisIoRun->TransferVirtualAddress = Add2Ptr( Irp->UserBuffer,
CurrentUserBufferOffset,
PVOID );
}
//
// Update our position in the transfer and the RunCount and
// ByteCount for the user.
//
RemainingByteCount -= CurrentByteCount;
//
// Break out if no more positions in the IoRuns array or
// we have all of the bytes accounted for.
//
*ThisByteCount += CurrentByteCount;
if ((RemainingByteCount == 0) || (*RunCount == MAX_PARALLEL_IOS)) {
break;
}
//
// Update our pointers for the user's buffer.
//
ThisIoRun += 1;
CurrentUserBuffer = Add2Ptr( CurrentUserBuffer, CurrentByteCount, PVOID );
CurrentUserBufferOffset += CurrentByteCount;
CurrentFileOffset += CurrentByteCount;
}
return FoundUnaligned;
}
//
// Local support routine
//
_Requires_lock_held_(_Global_critical_region_)
VOID
CdPrepareXABuffers (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIRP Irp,
_In_ PFCB Fcb,
_In_reads_bytes_(ByteCount) PVOID UserBuffer,
_In_ ULONG UserBufferOffset,
_In_ LONGLONG StartingOffset,
_In_ ULONG ByteCount,
_Out_ PIO_RUN IoRuns,
_Out_ PULONG RunCount,
_Out_ PULONG ThisByteCount
)
/*++
Routine Description:
This routine is the worker routine which looks up the individual runs
of an IO request and stores an entry for it in the IoRuns array. The
worker routine is for XA files where we need to convert the raw offset
in the file to logical cooked sectors. We store one raw sector in
the Vcb. If the current read is to that sector then we can simply copy
whatever bytes are needed from that sector.
Arguments:
Irp - Originating Irp for this request.
Fcb - This is the Fcb for this data stream. It must be a data stream.
UserBuffer - Current position in the user's buffer.
UserBufferOffset - Offset of this buffer from the beginning of the user's
buffer for the original request.
StartingOffset - Offset in the stream to begin the read.
ByteCount - Number of bytes to read. We will fill the IoRuns array up
to this point. We will stop early if we exceed the maximum number
of parallel Ios we support.
IoRuns - Pointer to the IoRuns array. The entire array is zeroes when
this routine is called.
RunCount - Number of entries in the IoRuns array filled here.
ThisByteCount - Number of bytes described by the IoRun entries. Will
not exceed the ByteCount passed in.
Return Value:
None
--*/
{
PIO_RUN ThisIoRun = IoRuns;
BOOLEAN PerformedCopy;
//
// The following deal with where we are in the range of raw sectors.
// Note that we will bias the input file offset by the RIFF header
// to deal directly with the raw sectors.
//
ULONG RawSectorOffset;
ULONG RemainingRawByteCount = ByteCount;
LONGLONG CurrentRawOffset = StartingOffset - sizeof( RIFF_HEADER );
//
// The following is the offset into the cooked sectors for the file.
//
LONGLONG CurrentCookedOffset;
ULONG RemainingCookedByteCount;
//
// Following indicate the state of the user's buffer. We have
// the destination of the next transfer and its offset in the
// buffer. We also have the next available position in the buffer
// available for a scratch buffer.
//
PVOID CurrentUserBuffer = UserBuffer;
ULONG CurrentUserBufferOffset = UserBufferOffset;
//
// The following is the next contiguous bytes on the disk to
// transfer. These are represented by cooked byte offset and length.
// We also compute the number of raw bytes in the current transfer.
//
LONGLONG DiskOffset = 0;
ULONG CurrentCookedByteCount = 0;
ULONG CurrentRawByteCount;
PAGED_CODE();
//
// We need to maintain our position as we walk through the sectors on the disk.
// We keep separate values for the cooked offset as well as the raw offset.
// These are initialized on sector boundaries and we move through these
// the file sector-by-sector.
//
// Try to do 32-bit math.
//
if (((PLARGE_INTEGER) &CurrentRawOffset)->HighPart == 0) {
//
// Prefix/fast: Note that the following are safe since we only
// take this path for 32bit offsets.
//
CurrentRawOffset = (LONGLONG) ((ULONG) CurrentRawOffset / RAW_SECTOR_SIZE);
#ifdef _MSC_VER
#pragma prefast( suppress: __WARNING_RESULTOFSHIFTCASTTOLARGERSIZE, "This is fine beacuse raw sector size > sector shift" )
#endif
CurrentCookedOffset = (LONGLONG) ((ULONG) CurrentRawOffset << SECTOR_SHIFT );
CurrentRawOffset = (LONGLONG) ((ULONG) CurrentRawOffset * RAW_SECTOR_SIZE);
//
// Otherwise we need to do 64-bit math (sigh).
//
} else {
CurrentRawOffset /= RAW_SECTOR_SIZE;
CurrentCookedOffset = CurrentRawOffset << SECTOR_SHIFT;
CurrentRawOffset *= RAW_SECTOR_SIZE;
}
//
// Now compute the full number of sectors to be read. Count all of the raw
// sectors that need to be read and convert to cooked bytes.
//
RawSectorOffset = (ULONG) ( StartingOffset - CurrentRawOffset) - sizeof( RIFF_HEADER );
CurrentRawByteCount = (RawSectorOffset + RemainingRawByteCount + RAW_SECTOR_SIZE - 1) / RAW_SECTOR_SIZE;
RemainingCookedByteCount = CurrentRawByteCount << SECTOR_SHIFT;
//
// Initialize the RunCount and ByteCount.
//
*RunCount = 0;
*ThisByteCount = 0;
//
// Loop while there are more bytes to process or there are
// available entries in the IoRun array.
//
while (TRUE) {
PerformedCopy = FALSE;
*RunCount += 1;
//
// Initialize the current position in the IoRuns array. Find the
// eventual destination in the user's buffer for this portion of the transfer.
//
ThisIoRun->UserBuffer = CurrentUserBuffer;
//
// Find the allocation information for the current offset in the
// stream.
//
CdLookupAllocation( IrpContext,
Fcb,
CurrentCookedOffset,
&DiskOffset,
&CurrentCookedByteCount );
//
// Maybe we got lucky and this is the same sector as in the
// Vcb.
//
if (DiskOffset == Fcb->Vcb->XADiskOffset) {
//
// We will perform safe synchronization. Check again that
// this is the correct sector.
//
CdLockVcb( IrpContext, Fcb->Vcb );
if ((DiskOffset == Fcb->Vcb->XADiskOffset) &&
(Fcb->Vcb->XASector != NULL)) {
//
// Copy any bytes we can from the current sector.
//
CurrentRawByteCount = RAW_SECTOR_SIZE - RawSectorOffset;
//
// Check whether we don't go to the end of the sector.
//
if (CurrentRawByteCount > RemainingRawByteCount) {
CurrentRawByteCount = RemainingRawByteCount;
}
RtlCopyMemory( CurrentUserBuffer,
Add2Ptr( Fcb->Vcb->XASector, RawSectorOffset, PCHAR ),
CurrentRawByteCount );
CdUnlockVcb( IrpContext, Fcb->Vcb );
//
// Adjust the run count and pointer in the IoRuns array
// to show that we didn't use a position.
//
*RunCount -= 1;
ThisIoRun -= 1;
//
// Remember that we performed a copy operation.
//
PerformedCopy = TRUE;
CurrentCookedByteCount = SECTOR_SIZE;
} else {
//
// The safe test showed no available buffer. Drop down to common code to
// perform the Io.
//
CdUnlockVcb( IrpContext, Fcb->Vcb );
}
}
//
// No work in this pass if we did a copy operation.
//
if (!PerformedCopy) {
//
// Limit ourselves by the number of remaining cooked bytes.
//
if (CurrentCookedByteCount > RemainingCookedByteCount) {
CurrentCookedByteCount = RemainingCookedByteCount;
}
ThisIoRun->DiskOffset = DiskOffset;
ThisIoRun->TransferBufferOffset = RawSectorOffset;
//
// We will always need to perform copy operations for XA files.
// We allocate an auxillary buffer to read the start of the
// transfer. Then we can use a range of the user's buffer to
// perform the next range of the transfer. Finally we may
// need to allocate a buffer for the tail of the transfer.
//
// We can use the user's buffer (at the current scratch buffer) if the
// following are true:
//
// If we are to store the beginning of the raw sector in the user's buffer.
// The current scratch buffer precedes the destination in the user's buffer
// (and hence also lies within it)
// There are enough bytes remaining in the buffer for at least one
// raw sector.
//
if ((RawSectorOffset == 0) &&
(RemainingRawByteCount >= RAW_SECTOR_SIZE)) {
//
// We can use the scratch buffer. We must ensure we don't send down reads
// greater than the device can handle, since the driver is unable to split
// raw requests.
//
if (CurrentCookedByteCount <= Fcb->Vcb->MaximumTransferRawSectors * SECTOR_SIZE) {
CurrentRawByteCount = (SectorAlign( CurrentCookedByteCount) >> SECTOR_SHIFT) * RAW_SECTOR_SIZE;
} else {
CurrentCookedByteCount = Fcb->Vcb->MaximumTransferRawSectors * SECTOR_SIZE;
CurrentRawByteCount = Fcb->Vcb->MaximumTransferRawSectors * RAW_SECTOR_SIZE;
}
//
// Now make sure we are within the page transfer limit.
//
while (ADDRESS_AND_SIZE_TO_SPAN_PAGES(CurrentUserBuffer, RawSectorAlign( CurrentRawByteCount)) >
Fcb->Vcb->MaximumPhysicalPages ) {
CurrentRawByteCount -= RAW_SECTOR_SIZE;
CurrentCookedByteCount -= SECTOR_SIZE;
}
//
// Trim the number of bytes to read if it won't fit into the current buffer. Take
// account of the fact that we must read in whole raw sector multiples.
//
while (RawSectorAlign( CurrentRawByteCount) > RemainingRawByteCount) {
CurrentRawByteCount -= RAW_SECTOR_SIZE;
CurrentCookedByteCount -= SECTOR_SIZE;
}
//
// Now trim the maximum number of raw bytes to the remaining bytes.
//
if (CurrentRawByteCount > RemainingRawByteCount) {
CurrentRawByteCount = RemainingRawByteCount;
}
//
// Update the IO run array. We point to the scratch buffer as
// well as the buffer and Mdl in the original Irp.
//
ThisIoRun->DiskByteCount = SectorAlign( CurrentCookedByteCount);
//
// Point to the user's buffer and Mdl for this transfer.
//
ThisIoRun->TransferBuffer = CurrentUserBuffer;
ThisIoRun->TransferMdl = Irp->MdlAddress;
ThisIoRun->TransferVirtualAddress = Add2Ptr( Irp->UserBuffer,
CurrentUserBufferOffset,
PVOID);
} else {
//
// We need to determine the number of bytes to transfer and the
// offset into this page to begin the transfer.
//
// We will transfer only one raw sector.
//
ThisIoRun->DiskByteCount = SECTOR_SIZE;
CurrentCookedByteCount = SECTOR_SIZE;
ThisIoRun->TransferByteCount = RAW_SECTOR_SIZE - RawSectorOffset;
ThisIoRun->TransferBufferOffset = RawSectorOffset;
if (ThisIoRun->TransferByteCount > RemainingRawByteCount) {
ThisIoRun->TransferByteCount = RemainingRawByteCount;
}
CurrentRawByteCount = ThisIoRun->TransferByteCount;
//
// We need to allocate an auxillary buffer. We will allocate
// a single page. Then we will build an Mdl to describe the buffer.
//
ThisIoRun->TransferBuffer = FsRtlAllocatePoolWithTag( CdNonPagedPool, PAGE_SIZE, TAG_IO_BUFFER );
//
// Allocate and build the Mdl to describe this buffer.
//
ThisIoRun->TransferMdl = IoAllocateMdl( ThisIoRun->TransferBuffer,
PAGE_SIZE,
FALSE,
FALSE,
NULL );
ThisIoRun->TransferVirtualAddress = ThisIoRun->TransferBuffer;
if (ThisIoRun->TransferMdl == NULL) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
MmBuildMdlForNonPagedPool( ThisIoRun->TransferMdl );
}
}
//
// Update the byte count for our caller.
//
RemainingRawByteCount -= CurrentRawByteCount;
*ThisByteCount += CurrentRawByteCount;
//
// Break out if no more positions in the IoRuns array or
// we have all of the bytes accounted for.
//
if ((RemainingRawByteCount == 0) || (*RunCount == MAX_PARALLEL_IOS)) {
break;
}
//
// Update our local pointers to allow for the current range of bytes.
//
ThisIoRun += 1;
CurrentUserBuffer = Add2Ptr( CurrentUserBuffer, CurrentRawByteCount, PVOID );
CurrentUserBufferOffset += CurrentRawByteCount;
RawSectorOffset = 0;
CurrentCookedOffset += CurrentCookedByteCount;
RemainingCookedByteCount -= CurrentCookedByteCount;
}
return;
}
//
// Local support routine
//
BOOLEAN
CdFinishBuffers (
_In_ PIRP_CONTEXT IrpContext,
_Inout_ PIO_RUN IoRuns,
_In_ ULONG RunCount,
_In_ BOOLEAN FinalCleanup,
_In_ BOOLEAN SaveXABuffer
)
/*++
Routine Description:
This routine is called to perform any data transferred required for
unaligned Io or to perform the final cleanup of the IoRuns array.
In all cases this is where we will deallocate any buffer and mdl
allocated to perform the unaligned transfer. If this is not the
final cleanup then we also transfer the bytes to the user buffer
and flush the hardware cache.
We walk backwards through the run array because we may be shifting data
in the user's buffer. Typical case is where we allocated a buffer for
the first part of a read and then used the user's buffer for the
next section (but stored it at the beginning of the buffer.
Arguments:
IoRuns - Pointer to the IoRuns array.
RunCount - Number of entries in the IoRuns array filled here.
FinalCleanup - Indicates if we should be deallocating temporary buffers
(TRUE) or transferring bytes for a unaligned transfers and
deallocating the buffers (FALSE). Flush the system cache if
transferring data.
SaveXABuffer - TRUE if we should try to save an XA buffer, FALSE otherwise
Return Value:
BOOLEAN - TRUE if this request needs the Io buffers to be flushed, FALSE otherwise.
--*/
{
BOOLEAN FlushIoBuffers = FALSE;
ULONG RemainingEntries = RunCount;
PIO_RUN ThisIoRun = &IoRuns[RunCount - 1];
PVCB Vcb;
PAGED_CODE();
//
// Walk through each entry in the IoRun array.
//
while (RemainingEntries != 0) {
//
// We only need to deal with the case of an unaligned transfer.
//
if (ThisIoRun->TransferByteCount != 0) {
//
// If not the final cleanup then transfer the data to the
// user's buffer and remember that we will need to flush
// the user's buffer to memory.
//
if (!FinalCleanup) {
RtlCopyMemory( ThisIoRun->UserBuffer,
Add2Ptr( ThisIoRun->TransferBuffer,
ThisIoRun->TransferBufferOffset,
PVOID ),
ThisIoRun->TransferByteCount );
FlushIoBuffers = TRUE;
}
//
// Free any Mdl we may have allocated. If the Mdl isn't
// present then we must have failed during the allocation
// phase.
//
if (ThisIoRun->TransferMdl != IrpContext->Irp->MdlAddress) {
if (ThisIoRun->TransferMdl != NULL) {
IoFreeMdl( ThisIoRun->TransferMdl );
}
//
// Now free any buffer we may have allocated. If the Mdl
// doesn't match the original Mdl then free the buffer.
//
if (ThisIoRun->TransferBuffer != NULL) {
//
// If this is the final buffer for an XA read then store this buffer
// into the Vcb so that we will have it when reading any remaining
// portion of this buffer.
//
if (SaveXABuffer) {
Vcb = IrpContext->Vcb;
CdLockVcb( IrpContext, Vcb );
if (Vcb->XASector != NULL) {
CdFreePool( &Vcb->XASector );
}
Vcb->XASector = ThisIoRun->TransferBuffer;
Vcb->XADiskOffset = ThisIoRun->DiskOffset;
SaveXABuffer = FALSE;
CdUnlockVcb( IrpContext, Vcb );
//
// Otherwise just free the buffer.
//
} else {
CdFreePool( &ThisIoRun->TransferBuffer );
}
}
}
}
//
// Now handle the case where we failed in the process
// of allocating associated Irps and Mdls.
//
if (ThisIoRun->SavedIrp != NULL) {
if (ThisIoRun->SavedIrp->MdlAddress != NULL) {
IoFreeMdl( ThisIoRun->SavedIrp->MdlAddress );
}
IoFreeIrp( ThisIoRun->SavedIrp );
}
//
// Move to the previous IoRun entry.
//
ThisIoRun -= 1;
RemainingEntries -= 1;
}
//
// If we copied any data then flush the Io buffers.
//
return FlushIoBuffers;
}
// Tell prefast this is a completion routine.
IO_COMPLETION_ROUTINE CdSyncCompletionRoutine;
NTSTATUS
NTAPI /* ReactOS Change: GCC Does not support STDCALL by default */
CdSyncCompletionRoutine (
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PVOID Contxt
)
/*++
Routine Description:
Completion routine for synchronizing back to dispatch.
Arguments:
Contxt - pointer to KEVENT.
Return Value:
STATUS_MORE_PROCESSING_REQUIRED
--*/
{
PKEVENT Event = (PKEVENT)Contxt;
_Analysis_assume_(Contxt != NULL);
UNREFERENCED_PARAMETER( Irp );
UNREFERENCED_PARAMETER( DeviceObject );
KeSetEvent( Event, 0, FALSE );
//
// We don't want IO to get our IRP and free it.
//
return STATUS_MORE_PROCESSING_REQUIRED;
}
_Requires_lock_held_(_Global_critical_region_)
VOID
CdFreeDirCache (
_In_ PIRP_CONTEXT IrpContext
)
/*++
Routine Description:
Safely frees the sector cache buffer.
Arguments:
Return Value:
None.
--*/
{
PAGED_CODE();
if (NULL != IrpContext->Vcb->SectorCacheBuffer) {
CdAcquireCacheForUpdate( IrpContext);
CdFreePool( &IrpContext->Vcb->SectorCacheBuffer);
CdReleaseCache( IrpContext);
}
}
_Requires_lock_held_(_Global_critical_region_)
BOOLEAN
CdReadDirDataThroughCache (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIO_RUN Run
)
/*++
Routine Description:
Reads blocks through the sector cache. If the data is present, then it
is copied from memory. If not present, one of the cache chunks will be
replaced with a chunk containing the requested region, and the data
copied from there.
Only intended for reading *directory* blocks, for the purpose of pre-caching
directory information, by reading a chunk of blocks which hopefully contains
other directory blocks, rather than just the (usually) single block requested.
Arguments:
Run - description of extent required, and buffer to read into.
Return Value:
None. Raises on error.
--*/
{
PVCB Vcb = IrpContext->Vcb;
ULONG Lbn = SectorsFromLlBytes( Run->DiskOffset);
ULONG Remaining = SectorsFromBytes( Run->DiskByteCount);
PUCHAR UserBuffer = Run->TransferBuffer;
NTSTATUS Status;
ULONG Found;
ULONG BufferSectorOffset;
ULONG StartBlock;
ULONG EndBlock;
ULONG Blocks;
PIO_STACK_LOCATION IrpSp;
IO_STATUS_BLOCK Iosb;
PTRACK_DATA TrackData;
#if DBG
BOOLEAN JustRead = FALSE;
#endif
ULONG Index;
PCD_SECTOR_CACHE_CHUNK Buffer;
BOOLEAN Result = FALSE;
PAGED_CODE();
CdAcquireCacheForRead( IrpContext);
_SEH2_TRY {
//
// Check the cache hasn't gone away due to volume verify failure (which
// is the *only* reason it'll go away). If this is the case we raise
// the same error any I/O would return if the cache weren't here.
//
if (NULL == Vcb->SectorCacheBuffer) {
CdRaiseStatus( IrpContext, STATUS_VERIFY_REQUIRED);
}
while (Remaining) {
Buffer = NULL;
//
// Look to see if any portion is currently cached.
//
for (Index = 0; Index < CD_SEC_CACHE_CHUNKS; Index++) {
if ((Vcb->SecCacheChunks[ Index].BaseLbn != -1) &&
(Vcb->SecCacheChunks[ Index].BaseLbn <= Lbn) &&
((Vcb->SecCacheChunks[ Index].BaseLbn + CD_SEC_CHUNK_BLOCKS) > Lbn)) {
Buffer = &Vcb->SecCacheChunks[ Index];
break;
}
}
//
// If we found any, copy it out and continue.
//
if (NULL != Buffer) {
BufferSectorOffset = Lbn - Buffer->BaseLbn;
Found = Min( CD_SEC_CHUNK_BLOCKS - BufferSectorOffset, Remaining);
RtlCopyMemory( UserBuffer,
Buffer->Buffer + BytesFromSectors( BufferSectorOffset),
BytesFromSectors( Found));
Remaining -= Found;
UserBuffer += BytesFromSectors( Found);
Lbn += Found;
#if DBG
//
// Update stats. Don't count a hit if we've just read the data in.
//
if (!JustRead) {
InterlockedIncrement( (LONG*)&Vcb->SecCacheHits);
}
JustRead = FALSE;
#endif
continue;
}
//
// Missed the cache, so we need to read a new chunk. Take the cache
// resource exclusive while we do so.
//
CdReleaseCache( IrpContext);
CdAcquireCacheForUpdate( IrpContext);
#if DBG
Vcb->SecCacheMisses += 1;
#endif
//
// Select the chunk to replace and calculate the start block of the
// chunk to cache. We cache blocks which start on Lbns aligned on
// multiples of chunk size, treating block 16 (VRS start) as block
// zero.
//
Buffer = &Vcb->SecCacheChunks[ Vcb->SecCacheLRUChunkIndex];
StartBlock = Lbn - ((Lbn - 16) % CD_SEC_CHUNK_BLOCKS);
//
// Make sure we don't try and read past end of the last track.
//
#ifdef __REACTOS__
if (Vcb->CdromToc) {
#endif
TrackData = &Vcb->CdromToc->TrackData[(Vcb->CdromToc->LastTrack - Vcb->CdromToc->FirstTrack + 1)];
SwapCopyUchar4( &EndBlock, &TrackData->Address );
Blocks = EndBlock - StartBlock;
if (Blocks > CD_SEC_CHUNK_BLOCKS) {
Blocks = CD_SEC_CHUNK_BLOCKS;
}
#ifdef __REACTOS__
} else {
// HACK!!!!!!!! Might cause reads to overrun the end of the partition, no idea what consequences that can have.
Blocks = CD_SEC_CHUNK_BLOCKS;
}
#endif
if ((0 == Blocks) || (Lbn < 16)) {
CdRaiseStatus( IrpContext, STATUS_INVALID_PARAMETER);
}
//
// Now build / send the read request.
//
IoReuseIrp( Vcb->SectorCacheIrp, STATUS_SUCCESS);
KeClearEvent( &Vcb->SectorCacheEvent);
Vcb->SectorCacheIrp->Tail.Overlay.Thread = PsGetCurrentThread();
//
// Get a pointer to the stack location of the first driver which will be
// invoked. This is where the function codes and the parameters are set.
//
IrpSp = IoGetNextIrpStackLocation( Vcb->SectorCacheIrp);
IrpSp->MajorFunction = (UCHAR) IRP_MJ_READ;
//
// Build an MDL to describe the buffer.
//
IoAllocateMdl( Buffer->Buffer,
BytesFromSectors( Blocks),
FALSE,
FALSE,
Vcb->SectorCacheIrp);
if (NULL == Vcb->SectorCacheIrp->MdlAddress) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES);
}
//
// We're reading/writing into the block cache (paged pool). Lock the
// pages and update the MDL with physical page information.
//
_SEH2_TRY {
MmProbeAndLockPages( Vcb->SectorCacheIrp->MdlAddress,
KernelMode,
(LOCK_OPERATION) IoWriteAccess );
}
#ifdef _MSC_VER
#pragma warning(suppress: 6320)
#endif
_SEH2_EXCEPT(EXCEPTION_EXECUTE_HANDLER) {
IoFreeMdl( Vcb->SectorCacheIrp->MdlAddress );
Vcb->SectorCacheIrp->MdlAddress = NULL;
} _SEH2_END;
if (NULL == Vcb->SectorCacheIrp->MdlAddress) {
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
//
// Reset the BaseLbn as we can't trust this Buffer's data until the request
// is successfully completed.
//
Buffer->BaseLbn = (ULONG)-1;
IrpSp->Parameters.Read.Length = BytesFromSectors( Blocks);
IrpSp->Parameters.Read.ByteOffset.QuadPart = LlBytesFromSectors( StartBlock);
IoSetCompletionRoutine( Vcb->SectorCacheIrp,
CdSyncCompletionRoutine,
&Vcb->SectorCacheEvent,
TRUE,
TRUE,
TRUE );
Vcb->SectorCacheIrp->UserIosb = &Iosb;
Status = IoCallDriver( Vcb->TargetDeviceObject, Vcb->SectorCacheIrp );
if (STATUS_PENDING == Status) {
(VOID)KeWaitForSingleObject( &Vcb->SectorCacheEvent,
Executive,
KernelMode,
FALSE,
NULL );
Status = Vcb->SectorCacheIrp->IoStatus.Status;
}
Vcb->SectorCacheIrp->UserIosb = NULL;
//
// Unlock the pages and free the MDL.
//
MmUnlockPages( Vcb->SectorCacheIrp->MdlAddress );
IoFreeMdl( Vcb->SectorCacheIrp->MdlAddress );
Vcb->SectorCacheIrp->MdlAddress = NULL;
if (!NT_SUCCESS( Status )) {
try_leave( Status );
}
//
// Update the buffer information, and drop the cache resource to shared
// to allow in reads.
//
Buffer->BaseLbn = StartBlock;
Vcb->SecCacheLRUChunkIndex = (Vcb->SecCacheLRUChunkIndex + 1) % CD_SEC_CACHE_CHUNKS;
CdConvertCacheToShared( IrpContext);
#if DBG
JustRead = TRUE;
#endif
}
Result = TRUE;
}
_SEH2_FINALLY {
CdReleaseCache( IrpContext);
} _SEH2_END;
return Result;
}
//
// Local support routine
//
_Requires_lock_held_(_Global_critical_region_)
VOID
CdMultipleAsync (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ ULONG RunCount,
_Inout_ PIO_RUN IoRuns
)
/*++
Routine Description:
This routine first does the initial setup required of a Master IRP that is
going to be completed using associated IRPs. This routine should not
be used if only one async request is needed, instead the single read
async routines should be called.
A context parameter is initialized, to serve as a communications area
between here and the common completion routine.
Next this routine reads or writes one or more contiguous sectors from
a device asynchronously, and is used if there are multiple reads for a
master IRP. A completion routine is used to synchronize with the
completion of all of the I/O requests started by calls to this routine.
Also, prior to calling this routine the caller must initialize the
IoStatus field in the Context, with the correct success status and byte
count which are expected if all of the parallel transfers complete
successfully. After return this status will be unchanged if all requests
were, in fact, successful. However, if one or more errors occur, the
IoStatus will be modified to reflect the error status and byte count
from the first run (by Vbo) which encountered an error. I/O status
from all subsequent runs will not be indicated.
Arguments:
RunCount - Supplies the number of multiple async requests
that will be issued against the master irp.
IoRuns - Supplies an array containing the Offset and ByteCount for the
separate requests.
Return Value:
None.
--*/
{
PIO_COMPLETION_ROUTINE CompletionRoutine;
PIO_STACK_LOCATION IrpSp;
PMDL Mdl;
PIRP Irp;
PIRP MasterIrp;
ULONG UnwindRunCount;
BOOLEAN UseSectorCache;
PAGED_CODE();
//
// Set up things according to whether this is truely async.
//
CompletionRoutine = CdMultiSyncCompletionRoutine;
if (!FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
CompletionRoutine = CdMultiAsyncCompletionRoutine;
}
//
// For directories, use the sector cache.
//
if ((SafeNodeType( Fcb) == CDFS_NTC_FCB_INDEX) &&
(NULL != Fcb->Vcb->SectorCacheBuffer) &&
(VcbMounted == IrpContext->Vcb->VcbCondition)) {
UseSectorCache = TRUE;
}
else {
UseSectorCache = FALSE;
}
//
// Initialize some local variables.
//
MasterIrp = IrpContext->Irp;
//
// Itterate through the runs, doing everything that can fail.
// We let the cleanup in CdFinishBuffers clean up on error.
//
for (UnwindRunCount = 0;
UnwindRunCount < RunCount;
UnwindRunCount += 1) {
if (UseSectorCache) {
if (!CdReadDirDataThroughCache( IrpContext, &IoRuns[ UnwindRunCount])) {
//
// Turn off using directory cache and restart all over again.
//
UseSectorCache = FALSE;
UnwindRunCount = 0;
}
continue;
}
//
// Create an associated IRP, making sure there is one stack entry for
// us, as well.
//
IoRuns[UnwindRunCount].SavedIrp =
Irp = IoMakeAssociatedIrp( MasterIrp, (CCHAR)(IrpContext->Vcb->TargetDeviceObject->StackSize + 1) );
if (Irp == NULL) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
//
// Allocate and build a partial Mdl for the request.
//
Mdl = IoAllocateMdl( IoRuns[UnwindRunCount].TransferVirtualAddress,
IoRuns[UnwindRunCount].DiskByteCount,
FALSE,
FALSE,
Irp );
if (Mdl == NULL) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
IoBuildPartialMdl( IoRuns[UnwindRunCount].TransferMdl,
Mdl,
IoRuns[UnwindRunCount].TransferVirtualAddress,
IoRuns[UnwindRunCount].DiskByteCount );
//
// Get the first IRP stack location in the associated Irp
//
IoSetNextIrpStackLocation( Irp );
IrpSp = IoGetCurrentIrpStackLocation( Irp );
//
// Setup the Stack location to describe our read.
//
IrpSp->MajorFunction = IRP_MJ_READ;
IrpSp->Parameters.Read.Length = IoRuns[UnwindRunCount].DiskByteCount;
IrpSp->Parameters.Read.ByteOffset.QuadPart = IoRuns[UnwindRunCount].DiskOffset;
//
// Set up the completion routine address in our stack frame.
//
IoSetCompletionRoutine( Irp,
CompletionRoutine,
IrpContext->IoContext,
TRUE,
TRUE,
TRUE );
//
// Setup the next IRP stack location in the associated Irp for the disk
// driver beneath us.
//
IrpSp = IoGetNextIrpStackLocation( Irp );
//
// Setup the Stack location to do a read from the disk driver.
//
IrpSp->MajorFunction = IRP_MJ_READ;
IrpSp->Parameters.Read.Length = IoRuns[UnwindRunCount].DiskByteCount;
IrpSp->Parameters.Read.ByteOffset.QuadPart = IoRuns[UnwindRunCount].DiskOffset;
}
//
// If we used the cache, we're done.
//
if (UseSectorCache) {
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT)) {
IrpContext->Irp->IoStatus.Status = STATUS_SUCCESS;
KeSetEvent( &IrpContext->IoContext->SyncEvent, 0, FALSE );
}
return;
}
//
// We only need to set the associated IRP count in the master irp to
// make it a master IRP. But we set the count to one more than our
// caller requested, because we do not want the I/O system to complete
// the I/O. We also set our own count.
//
IrpContext->IoContext->IrpCount = RunCount;
IrpContext->IoContext->MasterIrp = MasterIrp;
//
// We set the count in the master Irp to 1 since typically we
// will clean up the associated irps ourselves. Setting this to one
// means completing the last associated Irp with SUCCESS (in the async
// case) will complete the master irp.
//
MasterIrp->AssociatedIrp.IrpCount = 1;
//
// If we (FS) acquired locks, transition the lock owners to an object, since
// when we return this thread could go away before request completion, and
// the resource package may otherwise try to boost priority, etc.
//
if (!FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT ) &&
FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_TOP_LEVEL )) {
NT_ASSERT( IrpContext->IoContext->ResourceThreadId == (ERESOURCE_THREAD)PsGetCurrentThread() );
IrpContext->IoContext->ResourceThreadId = ((ULONG_PTR)IrpContext->IoContext) | 3;
ExSetResourceOwnerPointer( IrpContext->IoContext->Resource,
(PVOID)IrpContext->IoContext->ResourceThreadId );
}
//
// Now that all the dangerous work is done, issue the Io requests
//
for (UnwindRunCount = 0;
UnwindRunCount < RunCount;
UnwindRunCount++) {
Irp = IoRuns[UnwindRunCount].SavedIrp;
IoRuns[UnwindRunCount].SavedIrp = NULL;
if (NULL != Irp) {
//
// If IoCallDriver returns an error, it has completed the Irp
// and the error will be caught by our completion routines
// and dealt with as a normal IO error.
//
(VOID) IoCallDriver( IrpContext->Vcb->TargetDeviceObject, Irp );
}
}
}
//
// Local support routine
//
VOID
CdMultipleXAAsync (
_In_ PIRP_CONTEXT IrpContext,
_In_ ULONG RunCount,
_Inout_ PIO_RUN IoRuns,
_In_ PRAW_READ_INFO RawReads,
_In_ TRACK_MODE_TYPE TrackMode
)
/*++
Routine Description:
This routine first does the initial setup required of a Master IRP that is
going to be completed using associated IRPs. This routine is used to generate
the associated Irps used to read raw sectors from the disk.
A context parameter is initialized, to serve as a communications area
between here and the common completion routine.
Next this routine reads or writes one or more contiguous sectors from
a device asynchronously, and is used if there are multiple reads for a
master IRP. A completion routine is used to synchronize with the
completion of all of the I/O requests started by calls to this routine.
Also, prior to calling this routine the caller must initialize the
IoStatus field in the Context, with the correct success status and byte
count which are expected if all of the parallel transfers complete
successfully. After return this status will be unchanged if all requests
were, in fact, successful. However, if one or more errors occur, the
IoStatus will be modified to reflect the error status and byte count
from the first run (by Vbo) which encountered an error. I/O status
from all subsequent runs will not be indicated.
Arguments:
RunCount - Supplies the number of multiple async requests
that will be issued against the master irp.
IoRuns - Supplies an array containing the Offset and ByteCount for the
separate requests.
RawReads - Supplies an array of structures to store in the Irps passed to the
device driver to perform the low-level Io.
TrackMode - Supplies the recording mode of sectors in these IoRuns
Return Value:
None.
--*/
{
PIO_STACK_LOCATION IrpSp;
PMDL Mdl;
PIRP Irp;
PIRP MasterIrp;
ULONG UnwindRunCount;
ULONG RawByteCount;
PIO_RUN ThisIoRun = IoRuns;
PRAW_READ_INFO ThisRawRead = RawReads;
PAGED_CODE();
//
// Initialize some local variables.
//
MasterIrp = IrpContext->Irp;
//
// Itterate through the runs, doing everything that can fail.
// We let the cleanup in CdFinishBuffers clean up on error.
//
for (UnwindRunCount = 0;
UnwindRunCount < RunCount;
UnwindRunCount += 1, ThisIoRun += 1, ThisRawRead += 1) {
//
// Create an associated IRP, making sure there is one stack entry for
// us, as well.
//
ThisIoRun->SavedIrp =
Irp = IoMakeAssociatedIrp( MasterIrp, (CCHAR)(IrpContext->Vcb->TargetDeviceObject->StackSize + 1) );
if (Irp == NULL) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
//
// Should have been passed a byte count of at least one sector, and
// must be a multiple of sector size
//
NT_ASSERT( ThisIoRun->DiskByteCount && !SectorOffset(ThisIoRun->DiskByteCount));
RawByteCount = SectorsFromBytes( ThisIoRun->DiskByteCount) * RAW_SECTOR_SIZE;
//
// Allocate and build a partial Mdl for the request.
//
Mdl = IoAllocateMdl( ThisIoRun->TransferVirtualAddress,
RawByteCount,
FALSE,
FALSE,
Irp );
if (Mdl == NULL) {
IrpContext->Irp->IoStatus.Information = 0;
CdRaiseStatus( IrpContext, STATUS_INSUFFICIENT_RESOURCES );
}
IoBuildPartialMdl( ThisIoRun->TransferMdl,
Mdl,
ThisIoRun->TransferVirtualAddress,
RawByteCount);
//
// Get the first IRP stack location in the associated Irp
//
IoSetNextIrpStackLocation( Irp );
IrpSp = IoGetCurrentIrpStackLocation( Irp );
//
// Setup the Stack location to describe our read (using cooked values)
// These values won't be used for the raw read in any case.
//
IrpSp->MajorFunction = IRP_MJ_READ;
IrpSp->Parameters.Read.Length = ThisIoRun->DiskByteCount;
IrpSp->Parameters.Read.ByteOffset.QuadPart = ThisIoRun->DiskOffset;
//
// Set up the completion routine address in our stack frame.
//
IoSetCompletionRoutine( Irp,
CdMultiSyncCompletionRoutine,
IrpContext->IoContext,
TRUE,
TRUE,
TRUE );
//
// Setup the next IRP stack location in the associated Irp for the disk
// driver beneath us.
//
IrpSp = IoGetNextIrpStackLocation( Irp );
//
// Setup the stack location to do a read of raw sectors at this location.
// Note that the storage stack always reads multiples of whole XA sectors.
//
ThisRawRead->DiskOffset.QuadPart = ThisIoRun->DiskOffset;
ThisRawRead->SectorCount = ThisIoRun->DiskByteCount >> SECTOR_SHIFT;
ThisRawRead->TrackMode = TrackMode;
IrpSp->MajorFunction = IRP_MJ_DEVICE_CONTROL;
IrpSp->Parameters.DeviceIoControl.OutputBufferLength = ThisRawRead->SectorCount * RAW_SECTOR_SIZE;
Irp->UserBuffer = ThisIoRun->TransferVirtualAddress;
IrpSp->Parameters.DeviceIoControl.InputBufferLength = sizeof( RAW_READ_INFO );
IrpSp->Parameters.DeviceIoControl.Type3InputBuffer = ThisRawRead;
IrpSp->Parameters.DeviceIoControl.IoControlCode = IOCTL_CDROM_RAW_READ;
}
//
// We only need to set the associated IRP count in the master irp to
// make it a master IRP. But we set the count to one more than our
// caller requested, because we do not want the I/O system to complete
// the I/O. We also set our own count.
//
IrpContext->IoContext->IrpCount = RunCount;
IrpContext->IoContext->MasterIrp = MasterIrp;
//
// We set the count in the master Irp to 1 since typically we
// will clean up the associated irps ourselves. Setting this to one
// means completing the last associated Irp with SUCCESS (in the async
// case) will complete the master irp.
//
MasterIrp->AssociatedIrp.IrpCount = 1;
//
// Now that all the dangerous work is done, issue the Io requests
//
for (UnwindRunCount = 0;
UnwindRunCount < RunCount;
UnwindRunCount++) {
Irp = IoRuns[UnwindRunCount].SavedIrp;
IoRuns[UnwindRunCount].SavedIrp = NULL;
//
//
// If IoCallDriver returns an error, it has completed the Irp
// and the error will be caught by our completion routines
// and dealt with as a normal IO error.
//
(VOID) IoCallDriver( IrpContext->Vcb->TargetDeviceObject, Irp );
}
return;
}
//
// Local support routine
//
_Requires_lock_held_(_Global_critical_region_)
VOID
CdSingleAsync (
_In_ PIRP_CONTEXT IrpContext,
_In_ PIO_RUN Run,
_In_ PFCB Fcb
)
/*++
Routine Description:
This routine reads one or more contiguous sectors from a device
asynchronously, and is used if there is only one read necessary to
complete the IRP. It implements the read by simply filling
in the next stack frame in the Irp, and passing it on. The transfer
occurs to the single buffer originally specified in the user request.
Arguments:
ByteOffset - Supplies the starting Logical Byte Offset to begin reading from
ByteCount - Supplies the number of bytes to read from the device
Return Value:
None.
--*/
{
PIO_STACK_LOCATION IrpSp;
PIO_COMPLETION_ROUTINE CompletionRoutine;
PAGED_CODE();
//
// For directories, look in the sector cache,
//
if ((SafeNodeType( Fcb) == CDFS_NTC_FCB_INDEX) &&
(NULL != Fcb->Vcb->SectorCacheBuffer) &&
(VcbMounted == IrpContext->Vcb->VcbCondition)) {
if (CdReadDirDataThroughCache( IrpContext, Run )) {
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT)) {
IrpContext->Irp->IoStatus.Status = STATUS_SUCCESS;
KeSetEvent( &IrpContext->IoContext->SyncEvent, 0, FALSE );
}
return;
}
}
//
// Set up things according to whether this is truely async.
//
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT )) {
CompletionRoutine = CdSingleSyncCompletionRoutine;
} else {
CompletionRoutine = CdSingleAsyncCompletionRoutine;
//
// If we (FS) acquired locks, transition the lock owners to an object, since
// when we return this thread could go away before request completion, and
// the resource package may otherwise try to boost priority, etc.
//
if (FlagOn( IrpContext->Flags, IRP_CONTEXT_FLAG_TOP_LEVEL )) {
NT_ASSERT( IrpContext->IoContext->ResourceThreadId == (ERESOURCE_THREAD)PsGetCurrentThread() );
IrpContext->IoContext->ResourceThreadId = ((ULONG_PTR)IrpContext->IoContext) | 3;
ExSetResourceOwnerPointer( IrpContext->IoContext->Resource,
(PVOID)IrpContext->IoContext->ResourceThreadId );
}
}
//
// Set up the completion routine address in our stack frame.
//
IoSetCompletionRoutine( IrpContext->Irp,
CompletionRoutine,
IrpContext->IoContext,
TRUE,
TRUE,
TRUE );
//
// Setup the next IRP stack location in the associated Irp for the disk
// driver beneath us.
//
IrpSp = IoGetNextIrpStackLocation( IrpContext->Irp );
//
// Setup the Stack location to do a read from the disk driver.
//
IrpSp->MajorFunction = IrpContext->MajorFunction;
IrpSp->Parameters.Read.Length = Run->DiskByteCount;
IrpSp->Parameters.Read.ByteOffset.QuadPart = Run->DiskOffset;
//
// Issue the Io request
//
//
// If IoCallDriver returns an error, it has completed the Irp
// and the error will be caught by our completion routines
// and dealt with as a normal IO error.
//
(VOID)IoCallDriver( IrpContext->Vcb->TargetDeviceObject, IrpContext->Irp );
}
//
// Local support routine
//
VOID
CdWaitSync (
_In_ PIRP_CONTEXT IrpContext
)
/*++
Routine Description:
This routine waits for one or more previously started I/O requests
from the above routines, by simply waiting on the event.
Arguments:
Return Value:
None
--*/
{
PAGED_CODE();
(VOID)KeWaitForSingleObject( &IrpContext->IoContext->SyncEvent,
Executive,
KernelMode,
FALSE,
NULL );
KeClearEvent( &IrpContext->IoContext->SyncEvent );
}
//
// Local support routine
//
NTSTATUS
NTAPI /* ReactOS Change: GCC Does not support STDCALL by default */
CdMultiSyncCompletionRoutine (
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PVOID Context
)
/*++
Routine Description:
This is the completion routine for all synchronous reads
started via CdMultipleAsynch.
The completion routine has has the following responsibilities:
If the individual request was completed with an error, then
this completion routine must see if this is the first error
and remember the error status in the Context.
If the IrpCount goes to 1, then it sets the event in the Context
parameter to signal the caller that all of the asynch requests
are done.
Arguments:
DeviceObject - Pointer to the file system device object.
Irp - Pointer to the associated Irp which is being completed. (This
Irp will no longer be accessible after this routine returns.)
Context - The context parameter which was specified for all of
the multiple asynch I/O requests for this MasterIrp.
Return Value:
The routine returns STATUS_MORE_PROCESSING_REQUIRED so that we can
immediately complete the Master Irp without being in a race condition
with the IoCompleteRequest thread trying to decrement the IrpCount in
the Master Irp.
--*/
{
PCD_IO_CONTEXT IoContext = Context;
_Analysis_assume_(Context != NULL);
AssertVerifyDeviceIrp( Irp );
//
// If we got an error (or verify required), remember it in the Irp
//
if (!NT_SUCCESS( Irp->IoStatus.Status )) {
InterlockedExchange( &IoContext->Status, Irp->IoStatus.Status );
IoContext->MasterIrp->IoStatus.Information = 0;
}
//
// We must do this here since IoCompleteRequest won't get a chance
// on this associated Irp.
//
IoFreeMdl( Irp->MdlAddress );
IoFreeIrp( Irp );
if (InterlockedDecrement( &IoContext->IrpCount ) == 0) {
//
// Update the Master Irp with any error status from the associated Irps.
//
IoContext->MasterIrp->IoStatus.Status = IoContext->Status;
KeSetEvent( &IoContext->SyncEvent, 0, FALSE );
}
UNREFERENCED_PARAMETER( DeviceObject );
return STATUS_MORE_PROCESSING_REQUIRED;
}
//
// Local support routine
//
NTSTATUS
NTAPI /* ReactOS Change: GCC Does not support STDCALL by default */
CdMultiAsyncCompletionRoutine (
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PVOID Context
)
/*++
Routine Description:
This is the completion routine for all asynchronous reads
started via CdMultipleAsynch.
The completion routine has has the following responsibilities:
If the individual request was completed with an error, then
this completion routine must see if this is the first error
and remember the error status in the Context.
Arguments:
DeviceObject - Pointer to the file system device object.
Irp - Pointer to the associated Irp which is being completed. (This
Irp will no longer be accessible after this routine returns.)
Context - The context parameter which was specified for all of
the multiple asynch I/O requests for this MasterIrp.
Return Value:
Currently always returns STATUS_SUCCESS.
--*/
{
PCD_IO_CONTEXT IoContext = Context;
_Analysis_assume_(Context != NULL);
AssertVerifyDeviceIrp( Irp );
UNREFERENCED_PARAMETER( DeviceObject );
//
// If we got an error (or verify required), remember it in the Irp
//
if (!NT_SUCCESS( Irp->IoStatus.Status )) {
InterlockedExchange( &IoContext->Status, Irp->IoStatus.Status );
}
//
// Decrement IrpCount and see if it goes to zero.
//
if (InterlockedDecrement( &IoContext->IrpCount ) == 0) {
//
// Mark the master Irp pending
//
IoMarkIrpPending( IoContext->MasterIrp );
//
// Update the Master Irp with any error status from the associated Irps.
//
IoContext->MasterIrp->IoStatus.Status = IoContext->Status;
//
// Update the information field with the correct value.
//
IoContext->MasterIrp->IoStatus.Information = 0;
if (NT_SUCCESS( IoContext->MasterIrp->IoStatus.Status )) {
IoContext->MasterIrp->IoStatus.Information = IoContext->RequestedByteCount;
}
//
// Now release the resource
//
_Analysis_assume_lock_held_(*IoContext->Resource);
ExReleaseResourceForThreadLite( IoContext->Resource, IoContext->ResourceThreadId );
//
// and finally, free the context record.
//
CdFreeIoContext( IoContext );
//
// Return success in this case.
//
return STATUS_SUCCESS;
} else {
//
// We need to cleanup the associated Irp and its Mdl.
//
IoFreeMdl( Irp->MdlAddress );
IoFreeIrp( Irp );
return STATUS_MORE_PROCESSING_REQUIRED;
}
}
//
// Local support routine
//
NTSTATUS
NTAPI /* ReactOS Change: GCC Does not support STDCALL by default */
CdSingleSyncCompletionRoutine (
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PVOID Context
)
/*++
Routine Description:
This is the completion routine for all reads started via CdSingleAsynch.
The completion routine has has the following responsibilities:
It sets the event in the Context parameter to signal the caller
that all of the asynch requests are done.
Arguments:
DeviceObject - Pointer to the file system device object.
Irp - Pointer to the Irp for this request. (This Irp will no longer
be accessible after this routine returns.)
Context - The context parameter which was specified in the call to
CdSingleAsynch.
Return Value:
The routine returns STATUS_MORE_PROCESSING_REQUIRED so that we can
immediately complete the Master Irp without being in a race condition
with the IoCompleteRequest thread trying to decrement the IrpCount in
the Master Irp.
--*/
{
_Analysis_assume_(Context != NULL);
UNREFERENCED_PARAMETER( DeviceObject );
AssertVerifyDeviceIrp( Irp );
//
// Store the correct information field into the Irp.
//
if (!NT_SUCCESS( Irp->IoStatus.Status )) {
Irp->IoStatus.Information = 0;
}
KeSetEvent( &((PCD_IO_CONTEXT)Context)->SyncEvent, 0, FALSE );
return STATUS_MORE_PROCESSING_REQUIRED;
}
//
// Local support routine
//
NTSTATUS
NTAPI /* ReactOS Change: GCC Does not support STDCALL by default */
CdSingleAsyncCompletionRoutine (
PDEVICE_OBJECT DeviceObject,
PIRP Irp,
PVOID Context
)
/*++
Routine Description:
This is the completion routine for all asynchronous reads
started via CdSingleAsynch.
Arguments:
DeviceObject - Pointer to the file system device object.
Irp - Pointer to the Irp for this request. (This Irp will no longer
be accessible after this routine returns.)
Context - The context parameter which was specified in the call to
CdSingleAsynch.
Return Value:
Currently always returns STATUS_SUCCESS.
--*/
{
PCD_IO_CONTEXT IoContext = Context;
UNREFERENCED_PARAMETER( DeviceObject );
_Analysis_assume_(IoContext != NULL);
AssertVerifyDeviceIrp( Irp );
//
// Update the information field with the correct value for bytes read.
//
Irp->IoStatus.Information = 0;
if (NT_SUCCESS( Irp->IoStatus.Status )) {
Irp->IoStatus.Information = IoContext->RequestedByteCount;
}
//
// Mark the Irp pending
//
IoMarkIrpPending( Irp );
//
// Now release the resource
//
_Analysis_assume_lock_held_(*IoContext->Resource);
ExReleaseResourceForThreadLite( IoContext->Resource, IoContext->ResourceThreadId );
//
// and finally, free the context record.
//
CdFreeIoContext( IoContext );
return STATUS_SUCCESS;
}
//
// Local support routine
//
_When_(SafeNodeType(Fcb) != CDFS_NTC_FCB_PATH_TABLE && StartingOffset == 0, _At_(ByteCount, _In_range_(>=, CdAudioDirentSize + sizeof(RAW_DIRENT))))
_When_(SafeNodeType(Fcb) != CDFS_NTC_FCB_PATH_TABLE && StartingOffset != 0, _At_(ByteCount, _In_range_(>=, CdAudioDirentSize + SECTOR_SIZE)))
VOID
CdReadAudioSystemFile (
_In_ PIRP_CONTEXT IrpContext,
_In_ PFCB Fcb,
_In_ LONGLONG StartingOffset,
_In_ _In_range_(>=, CdAudioDirentSize) ULONG ByteCount,
_Out_writes_bytes_(ByteCount) PVOID SystemBuffer
)
/*++
Routine Description:
This routine is called to read the pseudo root directory and path
table for a music disk. We build the individual elements on the
stack and copy into the cache buffer.
Arguments:
Fcb - Fcb representing the file to read.
StartingOffset - Logical offset in the file to read from.
ByteCount - Number of bytes to read.
SystemBuffer - Pointer to buffer to fill in. This will always be page
aligned.
Return Value:
None.
--*/
{
PRAW_PATH_ISO RawPath;
PRAW_DIRENT RawDirent;
ULONG CurrentTrack;
ULONG SectorOffset;
ULONG EntryCount;
UCHAR TrackOnes;
UCHAR TrackTens;
PTRACK_DATA ThisTrack;
LONGLONG CurrentOffset;
PVOID CurrentSector;
PSYSTEM_USE_XA SystemUse;
ULONG BytesToCopy;
UCHAR LocalBuffer[FIELD_OFFSET( RAW_DIRENT, FileId ) + 12];
PAGED_CODE();
//
// If this is the path table then we just need a single entry.
//
if (SafeNodeType( Fcb ) == CDFS_NTC_FCB_PATH_TABLE) {
//
// Sanity check that the offset is zero.
//
NT_ASSERT( StartingOffset == 0 );
//
// Store a pseudo path entry in our local buffer.
//
RawPath = (PRAW_PATH_ISO) LocalBuffer;
RtlZeroMemory( RawPath, sizeof( LocalBuffer ));
RawPath->DirIdLen = 1;
RawPath->ParentNum = 1;
RawPath->DirId[0] = '\0';
//
// Now copy to the user's buffer.
//
BytesToCopy = FIELD_OFFSET( RAW_PATH_ISO, DirId ) + 2;
if (BytesToCopy > ByteCount) {
BytesToCopy = ByteCount;
}
RtlCopyMemory( SystemBuffer,
RawPath,
BytesToCopy );
//
// We need to deal with the multiple sector case for the root directory.
//
} else {
//
// Initialize the first track to return to our caller.
//
CurrentTrack = 0;
//
// If the offset is zero then store the entries for the self and parent
// entries.
//
if (StartingOffset == 0) {
RawDirent = SystemBuffer;
//
// Clear all of the fields initially.
//
RtlZeroMemory( RawDirent, FIELD_OFFSET( RAW_DIRENT, FileId ));
//
// Now fill in the interesting fields.
//
RawDirent->DirLen = FIELD_OFFSET( RAW_DIRENT, FileId ) + 1;
RawDirent->FileIdLen = 1;
RawDirent->FileId[0] = '\0';
SetFlag( RawDirent->FlagsISO, CD_ATTRIBUTE_DIRECTORY );
//
// Set the time stamp to be Jan 1, 1995
//
RawDirent->RecordTime[0] = 95;
RawDirent->RecordTime[1] = 1;
RawDirent->RecordTime[2] = 1;
SectorOffset = RawDirent->DirLen;
RawDirent = Add2Ptr( RawDirent, SectorOffset, PRAW_DIRENT );
//
// Clear all of the fields initially.
//
RtlZeroMemory( RawDirent, FIELD_OFFSET( RAW_DIRENT, FileId ));
//
// Now fill in the interesting fields.
//
RawDirent->DirLen = FIELD_OFFSET( RAW_DIRENT, FileId ) + 1;
RawDirent->FileIdLen = 1;
RawDirent->FileId[0] = '\1';
SetFlag( RawDirent->FlagsISO, CD_ATTRIBUTE_DIRECTORY );
//
// Set the time stamp to be Jan 1, 1995
//
RawDirent->RecordTime[0] = 95;
RawDirent->RecordTime[1] = 1;
RawDirent->RecordTime[2] = 1;
SectorOffset += RawDirent->DirLen;
EntryCount = 2;
//
// Otherwise compute the starting track to write to the buffer.
//
} else {
//
// Count the tracks in each preceding sector.
//
CurrentOffset = 0;
do {
CurrentTrack += CdAudioDirentsPerSector;
CurrentOffset += SECTOR_SIZE;
} while (CurrentOffset < StartingOffset);
//
// Bias the track count to reflect the two default entries.
//
CurrentTrack -= 2;
SectorOffset = 0;
EntryCount = 0;
}
//
// We now know the first track to return as well as where we are in
// the current sector. We will walk through sector by sector adding
// the entries for the separate tracks in the TOC. We will zero
// any sectors or partial sectors without data.
//
CurrentSector = SystemBuffer;
BytesToCopy = SECTOR_SIZE;
//
// Loop for each sector.
//
do {
//
// Add entries until we reach our threshold for each sector.
//
do {
//
// If we are beyond the entries in the TOC then exit.
//
if (CurrentTrack >= IrpContext->Vcb->TrackCount) {
break;
}
ThisTrack = &IrpContext->Vcb->CdromToc->TrackData[CurrentTrack];
//
// Point to the current position in the buffer.
//
RawDirent = Add2Ptr( CurrentSector, SectorOffset, PRAW_DIRENT );
//
// Clear all of the fields initially.
//
RtlZeroMemory( RawDirent, CdAudioDirentSize );
//
// Now fill in the interesting fields.
//
RawDirent->DirLen = (UCHAR) CdAudioDirentSize;
RawDirent->FileIdLen = CdAudioFileNameLength;
RtlCopyMemory( RawDirent->FileId,
CdAudioFileName,
CdAudioFileNameLength );
//
// Set the time stamp to be Jan 1, 1995 00:00
//
RawDirent->RecordTime[0] = 95;
RawDirent->RecordTime[1] = 1;
RawDirent->RecordTime[2] = 1;
//
// Put the track number into the file name.
//
TrackTens = TrackOnes = ThisTrack->TrackNumber;
TrackOnes = (TrackOnes % 10) + '0';
TrackTens /= 10;
TrackTens = (TrackTens % 10) + '0';
RawDirent->FileId[AUDIO_NAME_TENS_OFFSET] = TrackTens;
RawDirent->FileId[AUDIO_NAME_ONES_OFFSET] = TrackOnes;
SystemUse = Add2Ptr( RawDirent, CdAudioSystemUseOffset, PSYSTEM_USE_XA );
SystemUse->Attributes = SYSTEM_USE_XA_DA;
SystemUse->Signature = SYSTEM_XA_SIGNATURE;
//
// Store the track number as the file number.
//
SystemUse->FileNumber = (UCHAR) CurrentTrack;
EntryCount += 1;
SectorOffset += CdAudioDirentSize;
CurrentTrack += 1;
} while (EntryCount < CdAudioDirentsPerSector);
//
// Zero the remaining portion of this buffer.
//
RtlZeroMemory( Add2Ptr( CurrentSector, SectorOffset, PVOID ),
SECTOR_SIZE - SectorOffset );
//
// Prepare for the next sector.
//
EntryCount = 0;
BytesToCopy += SECTOR_SIZE;
SectorOffset = 0;
CurrentSector = Add2Ptr( CurrentSector, SECTOR_SIZE, PVOID );
} while (BytesToCopy <= ByteCount);
}
return;
}
NTSTATUS
CdHijackIrpAndFlushDevice (
_In_ PIRP_CONTEXT IrpContext,
_Inout_ PIRP Irp,
_In_ PDEVICE_OBJECT TargetDeviceObject
)
/*++
Routine Description:
This routine is called when we need to send a flush to a device but
we don't have a flush Irp. What this routine does is make a copy
of its current Irp stack location, but changes the Irp Major code
to a IRP_MJ_FLUSH_BUFFERS amd then send it down, but cut it off at
the knees in the completion routine, fix it up and return to the
user as if nothing had happened.
Arguments:
Irp - The Irp to hijack
TargetDeviceObject - The device to send the request to.
Return Value:
NTSTATUS - The Status from the flush in case anybody cares.
--*/
{
KEVENT Event;
NTSTATUS Status;
PIO_STACK_LOCATION NextIrpSp;
PAGED_CODE();
UNREFERENCED_PARAMETER( IrpContext );
//
// Get the next stack location, and copy over the stack location
//
NextIrpSp = IoGetNextIrpStackLocation( Irp );
*NextIrpSp = *IoGetCurrentIrpStackLocation( Irp );
NextIrpSp->MajorFunction = IRP_MJ_FLUSH_BUFFERS;
NextIrpSp->MinorFunction = 0;
//
// Set up the completion routine
//
KeInitializeEvent( &Event, NotificationEvent, FALSE );
IoSetCompletionRoutine( Irp,
CdSyncCompletionRoutine,
&Event,
TRUE,
TRUE,
TRUE );
//
// Send the request.
//
Status = IoCallDriver( TargetDeviceObject, Irp );
if (Status == STATUS_PENDING) {
(VOID)KeWaitForSingleObject( &Event, Executive, KernelMode, FALSE, NULL );
Status = Irp->IoStatus.Status;
}
//
// If the driver doesn't support flushes, return SUCCESS.
//
if (Status == STATUS_INVALID_DEVICE_REQUEST) {
Status = STATUS_SUCCESS;
}
Irp->IoStatus.Status = 0;
Irp->IoStatus.Information = 0;
return Status;
}
Reference in a new issue View git blame Copy permalink