Intravision/reactos
1
0
Fork 0
mirror of https://github.com/reactos/reactos.git synced 2024-12-27 01:24:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
reactos/hal/halx86/mp/ioapic.c
Serge Gautherie 2cc7eeb939
[HALX86] Add missing \n to DPRINT() calls (#5993) 
And promote some DPRINT() to DPRINT1().
2023-11-19 19:44:46 +01:00

694 lines
16 KiB
C
Raw Permalink Blame History

/*
* COPYRIGHT: See COPYING in the top level directory
* PROJECT: ReactOS kernel
* FILE: hal/halx86/mp/ioapic.c
* PURPOSE:
* PROGRAMMER:
*/
/* INCLUDES *****************************************************************/
#include <hal.h>
#define NDEBUG
#include <debug.h>
/* GLOBALS *****************************************************************/
MP_CONFIGURATION_INTSRC IRQMap[MAX_IRQ_SOURCE]; /* Map of all IRQs */
ULONG IRQCount = 0; /* Number of IRQs */
ULONG IrqApicMap[MAX_IRQ_SOURCE];
UCHAR BUSMap[MAX_BUS]; /* Map of all buses in the system */
UCHAR PCIBUSMap[MAX_BUS]; /* Map of all PCI buses in the system */
IOAPIC_INFO IOAPICMap[MAX_IOAPIC]; /* Map of all I/O APICs in the system */
ULONG IOAPICCount; /* Number of I/O APICs in the system */
ULONG IRQVectorMap[MAX_IRQ_SOURCE]; /* IRQ to vector map */
/* EISA interrupts are always polarity zero and can be edge or level
* trigger depending on the ELCR value. If an interrupt is listed as
* EISA conforming in the MP table, that means its trigger type must
* be read in from the ELCR */
#define default_EISA_trigger(idx) (EISA_ELCR_Read(IRQMap[idx].SrcBusIrq))
#define default_EISA_polarity(idx) (0)
/* ISA interrupts are always polarity zero edge triggered,
* when listed as conforming in the MP table. */
#define default_ISA_trigger(idx) (0)
#define default_ISA_polarity(idx) (0)
/* PCI interrupts are always polarity one level triggered,
* when listed as conforming in the MP table. */
#define default_PCI_trigger(idx) (1)
#define default_PCI_polarity(idx) (1)
/* MCA interrupts are always polarity zero level triggered,
* when listed as conforming in the MP table. */
#define default_MCA_trigger(idx) (1)
#define default_MCA_polarity(idx) (0)
/***************************************************************************/
extern VOID Disable8259AIrq(ULONG irq);
ULONG IOAPICRead(ULONG Apic, ULONG Offset);
VOID IOAPICWrite(ULONG Apic, ULONG Offset, ULONG Value);
/* FUNCTIONS ***************************************************************/
/*
* EISA Edge/Level control register, ELCR
*/
static ULONG EISA_ELCR_Read(ULONG irq)
{
if (irq < 16)
{
PUCHAR port = (PUCHAR)(0x4d0 + (irq >> 3));
return (READ_PORT_UCHAR(port) >> (irq & 7)) & 1;
}
DPRINT1("Broken MPtable reports ISA irq %lu\n", irq);
return 0;
}
static ULONG
IRQPolarity(ULONG idx)
{
ULONG bus = IRQMap[idx].SrcBusId;
ULONG polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
switch (IRQMap[idx].IrqFlag & 3)
{
case 0: /* conforms, ie. bus-type dependent polarity */
{
switch (BUSMap[bus])
{
case MP_BUS_ISA: /* ISA pin */
polarity = default_ISA_polarity(idx);
break;
case MP_BUS_EISA: /* EISA pin */
polarity = default_EISA_polarity(idx);
break;
case MP_BUS_PCI: /* PCI pin */
polarity = default_PCI_polarity(idx);
break;
case MP_BUS_MCA: /* MCA pin */
polarity = default_MCA_polarity(idx);
break;
default:
DPRINT1("Broken BIOS\n");
polarity = 1;
}
}
break;
case 1: /* high active */
polarity = 0;
break;
case 2: /* reserved */
DPRINT1("Broken BIOS\n");
polarity = 1;
break;
case 3: /* low active */
polarity = 1;
break;
default: /* invalid */
DPRINT1("Broken BIOS\n");
polarity = 1;
}
return polarity;
}
static ULONG
IRQTrigger(ULONG idx)
{
ULONG bus = IRQMap[idx].SrcBusId;
ULONG trigger;
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
switch ((IRQMap[idx].IrqFlag >> 2) & 3)
{
case 0: /* conforms, ie. bus-type dependent */
{
switch (BUSMap[bus])
{
case MP_BUS_ISA: /* ISA pin */
trigger = default_ISA_trigger(idx);
break;
case MP_BUS_EISA: /* EISA pin */
trigger = default_EISA_trigger(idx);
break;
case MP_BUS_PCI: /* PCI pin */
trigger = default_PCI_trigger(idx);
break;
case MP_BUS_MCA: /* MCA pin */
trigger = default_MCA_trigger(idx);
break;
default:
DPRINT1("Broken BIOS\n");
trigger = 1;
}
}
break;
case 1: /* edge */
trigger = 0;
break;
case 2: /* reserved */
DPRINT1("Broken BIOS\n");
trigger = 1;
break;
case 3: /* level */
trigger = 1;
break;
default: /* invalid */
DPRINT1("Broken BIOS\n");
trigger = 0;
}
return trigger;
}
static ULONG
Pin2Irq(ULONG idx,
ULONG apic,
ULONG pin)
{
ULONG irq, i;
ULONG bus = IRQMap[idx].SrcBusId;
/*
* Debugging check, we are in big trouble if this message pops up!
*/
if (IRQMap[idx].DstApicInt != pin)
{
DPRINT1("Broken BIOS or MPTABLE parser\n");
}
switch (BUSMap[bus])
{
case MP_BUS_ISA: /* ISA pin */
case MP_BUS_EISA:
case MP_BUS_MCA:
irq = IRQMap[idx].SrcBusIrq;
break;
case MP_BUS_PCI: /* PCI pin */
/*
* PCI IRQs are mapped in order
*/
i = irq = 0;
while (i < apic)
{
irq += IOAPICMap[i++].EntryCount;
}
irq += pin;
break;
default:
DPRINT1("Unknown bus type %lu\n", bus);
irq = 0;
}
return irq;
}
static ULONG
AssignIrqVector(ULONG irq)
{
#if 0
static ULONG current_vector = FIRST_DEVICE_VECTOR, vector_offset = 0;
#endif
ULONG vector;
/* There may already have been assigned a vector for this IRQ */
vector = IRQVectorMap[irq];
if (vector > 0)
{
return vector;
}
#if 0
if (current_vector > FIRST_SYSTEM_VECTOR)
{
vector_offset++;
current_vector = FIRST_DEVICE_VECTOR + vector_offset;
}
else if (current_vector == FIRST_SYSTEM_VECTOR)
{
DPRINT1("Ran out of interrupt sources\n");
ASSERT(FALSE);
}
vector = current_vector;
IRQVectorMap[irq] = vector;
current_vector += 8;
return vector;
#else
vector = IRQ2VECTOR(irq);
IRQVectorMap[irq] = vector;
return vector;
#endif
}
/*
* Find the IRQ entry number of a certain pin.
*/
static ULONG
IOAPICGetIrqEntry(ULONG apic,
ULONG pin,
ULONG type)
{
ULONG i;
for (i = 0; i < IRQCount; i++)
{
if (IRQMap[i].IrqType == type &&
(IRQMap[i].DstApicId == IOAPICMap[apic].ApicId || IRQMap[i].DstApicId == MP_APIC_ALL) &&
IRQMap[i].DstApicInt == pin)
{
return i;
}
}
return -1;
}
VOID
IOAPICSetupIrqs(VOID)
{
IOAPIC_ROUTE_ENTRY entry;
ULONG apic, pin, idx, irq, first_notcon = 1, vector, trigger;
DPRINT("Init IO_APIC IRQs\n");
/* Setup IRQ to vector translation map */
memset(&IRQVectorMap, 0, sizeof(IRQVectorMap));
for (apic = 0; apic < IOAPICCount; apic++)
{
for (pin = 0; pin < IOAPICMap[apic].EntryCount; pin++)
{
/*
* add it to the IO-APIC irq-routing table
*/
memset(&entry,0,sizeof(entry));
entry.delivery_mode = (APIC_DM_LOWEST >> 8);
entry.dest_mode = 1; /* logical delivery */
entry.mask = 1; /* disable IRQ */
entry.dest.logical.logical_dest = 0;
idx = IOAPICGetIrqEntry(apic,pin,INT_VECTORED);
if (idx == (ULONG)-1)
{
if (first_notcon)
{
DPRINT(" IO-APIC (apicid-pin) %u-%lu\n", IOAPICMap[apic].ApicId, pin);
first_notcon = 0;
}
else
{
DPRINT(", %u-%lu\n", IOAPICMap[apic].ApicId, pin);
}
continue;
}
trigger = IRQTrigger(idx);
entry.polarity = IRQPolarity(idx);
if (trigger)
{
entry.trigger = 1;
}
irq = Pin2Irq(idx, apic, pin);
vector = AssignIrqVector(irq);
entry.vector = vector;
DPRINT("Vector 0x%.08lx assigned to irq 0x%.02lx\n", vector, irq);
if (irq == 0)
{
/* Mask timer IRQ */
entry.mask = 1;
}
if ((apic == 0) && (irq < 16))
{
Disable8259AIrq(irq);
}
IOAPICWrite(apic, IOAPIC_REDTBL+2*pin+1, *(((PULONG)&entry)+1));
IOAPICWrite(apic, IOAPIC_REDTBL+2*pin, *(((PULONG)&entry)+0));
IrqApicMap[irq] = apic;
DPRINT("Vector %lx, Pin %lx, Irq %lx\n", vector, pin, irq);
}
}
}
static VOID
IOAPICClearPin(ULONG Apic, ULONG Pin)
{
IOAPIC_ROUTE_ENTRY Entry;
DPRINT("IOAPICClearPin(Apic %lu, Pin %lu\n", Apic, Pin);
/*
* Disable it in the IO-APIC irq-routing table
*/
memset(&Entry, 0, sizeof(Entry));
Entry.mask = 1;
IOAPICWrite(Apic, IOAPIC_REDTBL + 2 * Pin, *(((PULONG)&Entry) + 0));
IOAPICWrite(Apic, IOAPIC_REDTBL + 1 + 2 * Pin, *(((PULONG)&Entry) + 1));
}
static VOID
IOAPICClear(ULONG Apic)
{
ULONG Pin;
for (Pin = 0; Pin < /*IOAPICMap[Apic].EntryCount*/24; Pin++)
{
IOAPICClearPin(Apic, Pin);
}
}
static VOID
IOAPICClearAll(VOID)
{
ULONG Apic;
for (Apic = 0; Apic < IOAPICCount; Apic++)
{
IOAPICClear(Apic);
}
}
VOID
IOAPICEnable(VOID)
{
ULONG i, tmp;
/* Setup IRQ to vector translation map */
memset(&IRQVectorMap, 0, sizeof(IRQVectorMap));
/*
* The number of IO-APIC IRQ registers (== #pins):
*/
for (i = 0; i < IOAPICCount; i++)
{
tmp = IOAPICRead(i, IOAPIC_VER);
IOAPICMap[i].EntryCount = GET_IOAPIC_MRE(tmp) + 1;
}
/*
* Do not trust the IO-APIC being empty at bootup
*/
IOAPICClearAll();
}
VOID
IOAPICSetupIds(VOID)
{
ULONG tmp, apic, i;
UCHAR old_id;
/*
* Set the IOAPIC ID to the value stored in the MPC table.
*/
for (apic = 0; apic < IOAPICCount; apic++)
{
/* Read the register 0 value */
tmp = IOAPICRead(apic, IOAPIC_ID);
old_id = IOAPICMap[apic].ApicId;
if (IOAPICMap[apic].ApicId >= 0xf)
{
DPRINT1("BIOS bug, IO-APIC#%lu ID is %u in the MPC table\n", apic, IOAPICMap[apic].ApicId);
IOAPICMap[apic].ApicId = GET_IOAPIC_ID(tmp);
DPRINT1(" Fixed up to %u. (Tell your hardware vendor)\n", IOAPICMap[apic].ApicId);
}
/*
* We need to adjust the IRQ routing table
* if the ID changed.
*/
if (old_id != IOAPICMap[apic].ApicId)
{
for (i = 0; i < IRQCount; i++)
{
if (IRQMap[i].DstApicId == old_id)
{
IRQMap[i].DstApicId = IOAPICMap[apic].ApicId;
}
}
}
/*
* Read the right value from the MPC table and
* write it into the ID register.
*/
DPRINT("Changing IO-APIC physical APIC ID to %u\n", IOAPICMap[apic].ApicId);
tmp &= ~IOAPIC_ID_MASK;
tmp |= SET_IOAPIC_ID(IOAPICMap[apic].ApicId);
IOAPICWrite(apic, IOAPIC_ID, tmp);
/*
* Sanity check
*/
tmp = IOAPICRead(apic, 0);
if (GET_IOAPIC_ID(tmp) != IOAPICMap[apic].ApicId)
{
DPRINT1("Could not set I/O APIC ID!\n");
ASSERT(FALSE);
}
}
}
/* This is performance critical and should probably be done in assembler */
VOID IOAPICMaskIrq(ULONG Irq)
{
IOAPIC_ROUTE_ENTRY Entry;
ULONG Apic = IrqApicMap[Irq];
*(((PULONG)&Entry)+0) = IOAPICRead(Apic, IOAPIC_REDTBL+2*Irq);
*(((PULONG)&Entry)+1) = IOAPICRead(Apic, IOAPIC_REDTBL+2*Irq+1);
Entry.dest.logical.logical_dest &= ~(1 << KeGetCurrentProcessorNumber());
if (Entry.dest.logical.logical_dest == 0)
{
Entry.mask = 1;
}
IOAPICWrite(Apic, IOAPIC_REDTBL+2*Irq+1, *(((PULONG)&Entry)+1));
IOAPICWrite(Apic, IOAPIC_REDTBL+2*Irq, *(((PULONG)&Entry)+0));
}
/* This is performance critical and should probably be done in assembler */
VOID IOAPICUnmaskIrq(ULONG Irq)
{
IOAPIC_ROUTE_ENTRY Entry;
ULONG Apic = IrqApicMap[Irq];
*(((PULONG)&Entry)+0) = IOAPICRead(Apic, IOAPIC_REDTBL+2*Irq);
*(((PULONG)&Entry)+1) = IOAPICRead(Apic, IOAPIC_REDTBL+2*Irq+1);
Entry.dest.logical.logical_dest |= 1 << KeGetCurrentProcessorNumber();
Entry.mask = 0;
IOAPICWrite(Apic, IOAPIC_REDTBL+2*Irq+1, *(((PULONG)&Entry)+1));
IOAPICWrite(Apic, IOAPIC_REDTBL+2*Irq, *(((PULONG)&Entry)+0));
}
VOID IOAPICDump(VOID)
{
ULONG apic, i;
ULONG reg0, reg1, reg2=0;
DbgPrint("Number of MP IRQ sources: %d.\n", IRQCount);
for (i = 0; i < IOAPICCount; i++)
{
DbgPrint("Number of IO-APIC #%d registers: %d.\n",
IOAPICMap[i].ApicId,
IOAPICMap[i].EntryCount);
}
/*
* We are a bit conservative about what we expect. We have to
* know about every hardware change ASAP.
*/
DbgPrint("Testing the IO APIC.......................\n");
for (apic = 0; apic < IOAPICCount; apic++)
{
reg0 = IOAPICRead(apic, IOAPIC_ID);
reg1 = IOAPICRead(apic, IOAPIC_VER);
if (GET_IOAPIC_VERSION(reg1) >= 0x10)
{
reg2 = IOAPICRead(apic, IOAPIC_ARB);
}
DbgPrint("\n");
DbgPrint("IO APIC #%d......\n", IOAPICMap[apic].ApicId);
DbgPrint(".... register #00: %08X\n", reg0);
DbgPrint("....... : physical APIC id: %02X\n", GET_IOAPIC_ID(reg0));
if (reg0 & 0xF0FFFFFF)
{
DbgPrint(" WARNING: Unexpected IO-APIC\n");
}
DbgPrint(".... register #01: %08X\n", reg1);
i = GET_IOAPIC_MRE(reg1);
DbgPrint("....... : max redirection entries: %04X\n", i);
if ((i != 0x0f) && /* older (Neptune) boards */
(i != 0x17) && /* typical ISA+PCI boards */
(i != 0x1b) && /* Compaq Proliant boards */
(i != 0x1f) && /* dual Xeon boards */
(i != 0x22) && /* bigger Xeon boards */
(i != 0x2E) &&
(i != 0x3F))
{
DbgPrint(" WARNING: Unexpected IO-APIC\n");
}
i = GET_IOAPIC_VERSION(reg1);
DbgPrint("....... : IO APIC version: %04X\n", i);
if ((i != 0x01) && /* 82489DX IO-APICs */
(i != 0x10) && /* oldest IO-APICs */
(i != 0x11) && /* Pentium/Pro IO-APICs */
(i != 0x13)) /* Xeon IO-APICs */
{
DbgPrint(" WARNING: Unexpected IO-APIC\n");
}
if (reg1 & 0xFF00FF00)
{
DbgPrint(" WARNING: Unexpected IO-APIC\n");
}
if (GET_IOAPIC_VERSION(reg1) >= 0x10)
{
DbgPrint(".... register #02: %08X\n", reg2);
DbgPrint("....... : arbitration: %02X\n",
GET_IOAPIC_ARB(reg2));
if (reg2 & 0xF0FFFFFF)
{
DbgPrint(" WARNING: Unexpected IO-APIC\n");
}
}
DbgPrint(".... IRQ redirection table:\n");
DbgPrint(" NR Log Phy Mask Trig IRR Pol"
" Stat Dest Deli Vect: \n");
for (i = 0; i <= GET_IOAPIC_MRE(reg1); i++)
{
IOAPIC_ROUTE_ENTRY entry;
*(((PULONG)&entry)+0) = IOAPICRead(apic, 0x10+i*2);
*(((PULONG)&entry)+1) = IOAPICRead(apic, 0x11+i*2);
DbgPrint(" %02x %03X %02X ",
i,
entry.dest.logical.logical_dest,
entry.dest.physical.physical_dest);
DbgPrint("%C %C %1d %C %C %C %03X %02X\n",
(entry.mask == 0) ? 'U' : 'M', // Unmasked/masked
(entry.trigger == 0) ? 'E' : 'L', // Edge/level sensitive
entry.irr,
(entry.polarity == 0) ? 'H' : 'L', // Active high/active low
(entry.delivery_status == 0) ? 'I' : 'S', // Idle / send pending
(entry.dest_mode == 0) ? 'P' : 'L', // Physical logical
entry.delivery_mode,
entry.vector);
}
}
DbgPrint(".................................... done.\n");
}
VOID
HaliReconfigurePciInterrupts(VOID)
{
ULONG i;
for (i = 0; i < IRQCount; i++)
{
if (BUSMap[IRQMap[i].SrcBusId] == MP_BUS_PCI)
{
DPRINT("%02lx: IrqType %02x, IrqFlag %04x, SrcBusId %02x"
", SrcBusIrq %02x, DstApicId %02x, DstApicInt %02x\n",
i, IRQMap[i].IrqType, IRQMap[i].IrqFlag, IRQMap[i].SrcBusId,
IRQMap[i].SrcBusIrq, IRQMap[i].DstApicId, IRQMap[i].DstApicInt);
HalSetBusDataByOffset(PCIConfiguration,
IRQMap[i].SrcBusId,
(IRQMap[i].SrcBusIrq >> 2) & 0x1f,
&IRQMap[i].DstApicInt,
0x3c /*PCI_INTERRUPT_LINE*/,
1);
}
}
}
VOID Disable8259AIrq(ULONG irq)
{
UCHAR tmp;
if (irq >= 8)
{
tmp = READ_PORT_UCHAR((PUCHAR)0xA1);
tmp |= (1 << (irq - 8));
WRITE_PORT_UCHAR((PUCHAR)0xA1, tmp);
}
else
{
tmp = READ_PORT_UCHAR((PUCHAR)0x21);
tmp |= (1 << irq);
WRITE_PORT_UCHAR((PUCHAR)0x21, tmp);
}
}
ULONG IOAPICRead(ULONG Apic, ULONG Offset)
{
PULONG Base;
Base = (PULONG)IOAPICMap[Apic].ApicAddress;
*Base = Offset;
return *((PULONG)((ULONG)Base + IOAPIC_IOWIN));
}
VOID IOAPICWrite(ULONG Apic, ULONG Offset, ULONG Value)
{
PULONG Base;
Base = (PULONG)IOAPICMap[Apic].ApicAddress;
*Base = Offset;
*((PULONG)((ULONG)Base + IOAPIC_IOWIN)) = Value;
}
/* EOF */
Reference in a new issue View git blame Copy permalink