mirror of
https://github.com/reactos/reactos.git
synced 2024-12-28 01:55:19 +00:00
b79fbe2333
The driver supports all nVidia chipset models from 2001 until 2010, starting from nForce. All NICs are compatible with x86 and amd64 devices only. Tested by Daniel Reimer on OG Xbox and by me on MCP board. CORE-15872 CORE-16216
1144 lines
33 KiB
C
1144 lines
33 KiB
C
/*
|
|
* PROJECT: ReactOS nVidia nForce Ethernet Controller Driver
|
|
* LICENSE: GPL-2.0-or-later (https://spdx.org/licenses/GPL-2.0-or-later)
|
|
* PURPOSE: PHY layer setup and management
|
|
* COPYRIGHT: Copyright 2021-2022 Dmitry Borisov <di.sean@protonmail.com>
|
|
*/
|
|
|
|
/*
|
|
* HW access code was taken from the Linux forcedeth driver
|
|
* Copyright (C) 2003,4,5 Manfred Spraul
|
|
* Copyright (C) 2004 Andrew de Quincey
|
|
* Copyright (C) 2004 Carl-Daniel Hailfinger
|
|
* Copyright (c) 2004,2005,2006,2007,2008,2009 NVIDIA Corporation
|
|
*/
|
|
|
|
/* INCLUDES *******************************************************************/
|
|
|
|
#include "nvnet.h"
|
|
|
|
#define NDEBUG
|
|
#include "debug.h"
|
|
|
|
/* GLOBALS ********************************************************************/
|
|
|
|
BOOLEAN
|
|
MiiWrite(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_In_ ULONG PhyAddress,
|
|
_In_ ULONG RegAddress,
|
|
_In_ ULONG Data)
|
|
{
|
|
ULONG i;
|
|
|
|
NV_WRITE(Adapter, NvRegMIIStatus, NVREG_MIISTAT_MASK_RW);
|
|
|
|
if (NV_READ(Adapter, NvRegMIIControl) & NVREG_MIICTL_INUSE)
|
|
{
|
|
NV_WRITE(Adapter, NvRegMIIControl, NVREG_MIICTL_INUSE);
|
|
NdisStallExecution(NV_MIIBUSY_DELAY);
|
|
}
|
|
|
|
NV_WRITE(Adapter, NvRegMIIData, Data);
|
|
NV_WRITE(Adapter, NvRegMIIControl,
|
|
NVREG_MIICTL_WRITE | (PhyAddress << NVREG_MIICTL_ADDRSHIFT) | RegAddress);
|
|
|
|
for (i = NV_MIIPHY_DELAYMAX; i > 0; --i)
|
|
{
|
|
NdisStallExecution(NV_MIIPHY_DELAY);
|
|
|
|
if (!(NV_READ(Adapter, NvRegMIIControl) & NVREG_MIICTL_INUSE))
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
{
|
|
return FALSE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
BOOLEAN
|
|
MiiRead(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_In_ ULONG PhyAddress,
|
|
_In_ ULONG RegAddress,
|
|
_Out_ PULONG Data)
|
|
{
|
|
ULONG i;
|
|
|
|
NV_WRITE(Adapter, NvRegMIIStatus, NVREG_MIISTAT_MASK_RW);
|
|
|
|
if (NV_READ(Adapter, NvRegMIIControl) & NVREG_MIICTL_INUSE)
|
|
{
|
|
NV_WRITE(Adapter, NvRegMIIControl, NVREG_MIICTL_INUSE);
|
|
NdisStallExecution(NV_MIIBUSY_DELAY);
|
|
}
|
|
|
|
NV_WRITE(Adapter, NvRegMIIControl, (PhyAddress << NVREG_MIICTL_ADDRSHIFT) | RegAddress);
|
|
|
|
for (i = NV_MIIPHY_DELAYMAX; i > 0; --i)
|
|
{
|
|
NdisStallExecution(NV_MIIPHY_DELAY);
|
|
|
|
if (!(NV_READ(Adapter, NvRegMIIControl) & NVREG_MIICTL_INUSE))
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
{
|
|
*Data = 0;
|
|
return FALSE;
|
|
}
|
|
|
|
if (NV_READ(Adapter, NvRegMIIStatus) & NVREG_MIISTAT_ERROR)
|
|
{
|
|
*Data = 0;
|
|
return FALSE;
|
|
}
|
|
|
|
*Data = NV_READ(Adapter, NvRegMIIData);
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
PhyInitRealtek8211b(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG i;
|
|
const struct
|
|
{
|
|
ULONG Register;
|
|
ULONG Data;
|
|
} Sequence[] =
|
|
{
|
|
{ PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1 },
|
|
{ PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2 },
|
|
{ PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3 },
|
|
{ PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4 },
|
|
{ PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5 },
|
|
{ PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6 },
|
|
{ PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1 }
|
|
};
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
for (i = 0; i < RTL_NUMBER_OF(Sequence); ++i)
|
|
{
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, Sequence[i].Register, Sequence[i].Data))
|
|
return FALSE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
PhyInitRealtek8211c(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG PowerState, MiiRegister;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
PowerState = NV_READ(Adapter, NvRegPowerState2);
|
|
|
|
NV_WRITE(Adapter, NvRegPowerState2, PowerState | NVREG_POWERSTATE2_PHY_RESET);
|
|
NdisMSleep(25000);
|
|
|
|
NV_WRITE(Adapter, NvRegPowerState2, PowerState);
|
|
NdisMSleep(25000);
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG6, &MiiRegister);
|
|
MiiRegister |= PHY_REALTEK_INIT9;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG6, MiiRegister))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG7, &MiiRegister);
|
|
if (!(MiiRegister & PHY_REALTEK_INIT11))
|
|
{
|
|
MiiRegister |= PHY_REALTEK_INIT11;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG7, MiiRegister))
|
|
return FALSE;
|
|
}
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1))
|
|
return FALSE;
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
PhyInitRealtek8201(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_In_ BOOLEAN DisableCrossoverDetection)
|
|
{
|
|
ULONG MiiRegister;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
if (Adapter->Features & DEV_NEED_PHY_INIT_FIX)
|
|
{
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG6, &MiiRegister);
|
|
MiiRegister |= PHY_REALTEK_INIT7;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG6, MiiRegister))
|
|
return FALSE;
|
|
}
|
|
|
|
if (DisableCrossoverDetection)
|
|
{
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG2, &MiiRegister);
|
|
MiiRegister &= ~PHY_REALTEK_INIT_MSK1;
|
|
MiiRegister |= PHY_REALTEK_INIT3;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG2, MiiRegister))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1))
|
|
return FALSE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
PhyInitCicadaSemiconductor(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_In_ ULONG PhyInterface)
|
|
{
|
|
ULONG MiiRegister;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
if (PhyInterface & PHY_RGMII)
|
|
{
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_CICADA_INIT_REG2, &MiiRegister);
|
|
MiiRegister &= ~(PHY_CICADA_INIT1 | PHY_CICADA_INIT2);
|
|
MiiRegister |= (PHY_CICADA_INIT3 | PHY_CICADA_INIT4);
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_CICADA_INIT_REG2, MiiRegister))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_CICADA_INIT_REG3, &MiiRegister);
|
|
MiiRegister |= PHY_CICADA_INIT5;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_CICADA_INIT_REG3, MiiRegister))
|
|
return FALSE;
|
|
}
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_CICADA_INIT_REG1, &MiiRegister);
|
|
MiiRegister |= PHY_CICADA_INIT6;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_CICADA_INIT_REG1, MiiRegister))
|
|
return FALSE;
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
PhyInitVitesseSemiconductor(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG MiiRegister;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT1))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT2))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG4, &MiiRegister);
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG4, MiiRegister))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG3, &MiiRegister);
|
|
MiiRegister &= ~PHY_VITESSE_INIT_MSK1;
|
|
MiiRegister |= PHY_VITESSE_INIT3;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG3, MiiRegister))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT4))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT5))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG4, &MiiRegister);
|
|
MiiRegister &= ~PHY_VITESSE_INIT_MSK1;
|
|
MiiRegister |= PHY_VITESSE_INIT3;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG4, MiiRegister))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG3, &MiiRegister);
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG3, MiiRegister))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT6))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT7))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG4, &MiiRegister);
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG4, MiiRegister))
|
|
return FALSE;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG3, &MiiRegister);
|
|
MiiRegister &= ~PHY_VITESSE_INIT_MSK2;
|
|
MiiRegister |= PHY_VITESSE_INIT8;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG3, MiiRegister))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT9))
|
|
return FALSE;
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT10))
|
|
return FALSE;
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
PhyReset(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_In_ ULONG ControlSetup)
|
|
{
|
|
ULONG Tries = 0, MiiControl = MII_CR_RESET | ControlSetup;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, MII_CONTROL, MiiControl))
|
|
return FALSE;
|
|
|
|
NdisMSleep(500000);
|
|
|
|
do
|
|
{
|
|
NdisMSleep(10000);
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_CONTROL, &MiiControl);
|
|
|
|
if (Tries++ > 100)
|
|
return FALSE;
|
|
}
|
|
while (MiiControl & MII_CR_RESET);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
NDIS_STATUS
|
|
PhyInit(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG PhyInterface, MiiRegister, MiiStatus, MiiControl;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
/* PHY errata for E3016 PHY */
|
|
if (Adapter->PhyModel == PHY_MODEL_MARVELL_E3016)
|
|
{
|
|
MiiRead(Adapter, Adapter->PhyAddress, PHY_MARVELL_INIT_REG1, &MiiRegister);
|
|
MiiRegister &= ~PHY_MARVELL_E3016_INITMASK;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, PHY_MARVELL_INIT_REG1, MiiRegister))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
|
|
if (Adapter->PhyOui == PHY_OUI_REALTEK)
|
|
{
|
|
if (Adapter->PhyModel == PHY_MODEL_REALTEK_8211 &&
|
|
Adapter->PhyRevision == PHY_REV_REALTEK_8211B)
|
|
{
|
|
if (!PhyInitRealtek8211b(Adapter))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else if (Adapter->PhyModel == PHY_MODEL_REALTEK_8211 &&
|
|
Adapter->PhyRevision == PHY_REV_REALTEK_8211C)
|
|
{
|
|
if (!PhyInitRealtek8211c(Adapter))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else if (Adapter->PhyModel == PHY_MODEL_REALTEK_8201)
|
|
{
|
|
if (!PhyInitRealtek8201(Adapter, FALSE))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set advertise register */
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_AUTONEG_ADVERTISE, &MiiRegister);
|
|
if (Adapter->Flags & NV_FORCE_SPEED_AND_DUPLEX)
|
|
{
|
|
MiiRegister &= ~(MII_ADV_10T_HD | MII_ADV_10T_FD | MII_ADV_100T_HD | MII_ADV_100T_FD |
|
|
MII_ADV_100T4 | MII_ADV_PAUSE_SYM | MII_ADV_PAUSE_ASYM);
|
|
|
|
if (Adapter->Flags & NV_USER_SPEED_100)
|
|
{
|
|
if (Adapter->Flags & NV_FORCE_FULL_DUPLEX)
|
|
MiiRegister |= MII_ADV_100T_FD;
|
|
else
|
|
MiiRegister |= MII_ADV_100T_HD;
|
|
}
|
|
else
|
|
{
|
|
if (Adapter->Flags & NV_FORCE_FULL_DUPLEX)
|
|
MiiRegister |= MII_ADV_10T_FD;
|
|
else
|
|
MiiRegister |= MII_ADV_10T_HD;
|
|
}
|
|
|
|
Adapter->PauseFlags &= ~(NV_PAUSEFRAME_AUTONEG | NV_PAUSEFRAME_RX_ENABLE |
|
|
NV_PAUSEFRAME_TX_ENABLE);
|
|
if (Adapter->PauseFlags & NV_PAUSEFRAME_RX_REQ)
|
|
{
|
|
/* For RX we set both advertisements but disable TX pause */
|
|
MiiRegister |= MII_ADV_PAUSE_SYM | MII_ADV_PAUSE_ASYM;
|
|
Adapter->PauseFlags |= NV_PAUSEFRAME_RX_ENABLE;
|
|
}
|
|
if (Adapter->PauseFlags & NV_PAUSEFRAME_TX_REQ)
|
|
{
|
|
MiiRegister |= MII_ADV_PAUSE_ASYM;
|
|
Adapter->PauseFlags |= NV_PAUSEFRAME_TX_ENABLE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
MiiRegister |= MII_ADV_10T_HD | MII_ADV_10T_FD | MII_ADV_100T_HD |
|
|
MII_ADV_100T_FD | MII_ADV_PAUSE_SYM | MII_ADV_PAUSE_ASYM;
|
|
}
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, MII_AUTONEG_ADVERTISE, MiiRegister))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed!\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
|
|
/* Get PHY interface type */
|
|
PhyInterface = NV_READ(Adapter, NvRegPhyInterface);
|
|
|
|
/* See if gigabit PHY */
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_STATUS, &MiiStatus);
|
|
if (MiiStatus & PHY_GIGABIT)
|
|
{
|
|
ULONG MiiControl1000;
|
|
|
|
Adapter->Flags |= NV_GIGABIT_PHY;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_MASTER_SLAVE_CONTROL, &MiiControl1000);
|
|
MiiControl1000 &= ~MII_MS_CR_1000T_HD;
|
|
if ((PhyInterface & PHY_RGMII) && !(Adapter->Flags & NV_FORCE_SPEED_AND_DUPLEX))
|
|
MiiControl1000 |= MII_MS_CR_1000T_FD;
|
|
else
|
|
MiiControl1000 &= ~MII_MS_CR_1000T_FD;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, MII_MASTER_SLAVE_CONTROL, MiiControl1000))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
Adapter->Flags &= ~NV_GIGABIT_PHY;
|
|
}
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_CONTROL, &MiiControl);
|
|
MiiControl |= MII_CR_AUTONEG;
|
|
if (Adapter->PhyOui == PHY_OUI_REALTEK &&
|
|
Adapter->PhyModel == PHY_MODEL_REALTEK_8211 &&
|
|
Adapter->PhyRevision == PHY_REV_REALTEK_8211C)
|
|
{
|
|
/* Start auto-negation since we already performed HW reset above */
|
|
MiiControl |= MII_CR_AUTONEG_RESTART;
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, MII_CONTROL, MiiControl))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Reset the PHY (certain PHYs need BMCR to be setup with reset) */
|
|
if (!PhyReset(Adapter, MiiControl))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY reset failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
|
|
/* PHY vendor specific configuration */
|
|
if (Adapter->PhyOui == PHY_OUI_CICADA)
|
|
{
|
|
if (!PhyInitCicadaSemiconductor(Adapter, PhyInterface))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else if (Adapter->PhyOui == PHY_OUI_VITESSE)
|
|
{
|
|
if (!PhyInitVitesseSemiconductor(Adapter))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else if (Adapter->PhyOui == PHY_OUI_REALTEK)
|
|
{
|
|
if (Adapter->PhyModel == PHY_MODEL_REALTEK_8211 &&
|
|
Adapter->PhyRevision == PHY_REV_REALTEK_8211B)
|
|
{
|
|
/* Reset could have cleared these out, set them back */
|
|
if (!PhyInitRealtek8211b(Adapter))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
else if (Adapter->PhyModel == PHY_MODEL_REALTEK_8201)
|
|
{
|
|
if (!PhyInitRealtek8201(Adapter, TRUE))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("PHY init failed\n"));
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Some PHYs clear out pause advertisement on reset, set it back */
|
|
MiiWrite(Adapter, Adapter->PhyAddress, MII_AUTONEG_ADVERTISE, MiiRegister);
|
|
|
|
/* Restart auto-negotiation */
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_CONTROL, &MiiControl);
|
|
MiiControl |= (MII_CR_AUTONEG_RESTART | MII_CR_AUTONEG);
|
|
if (!MiiWrite(Adapter, Adapter->PhyAddress, MII_CONTROL, MiiControl))
|
|
return NDIS_STATUS_FAILURE;
|
|
|
|
return NDIS_STATUS_SUCCESS;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
FindPhyDevice(
|
|
_Inout_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG Phy;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
for (Phy = 1; Phy <= 32; ++Phy)
|
|
{
|
|
ULONG PhyAddress = Phy & 0x1F; /* Check the PHY 0 last */
|
|
ULONG PhyIdLow, PhyIdHigh;
|
|
|
|
if (!MiiRead(Adapter, PhyAddress, MII_PHY_ID1, &PhyIdLow))
|
|
continue;
|
|
if (PhyIdLow == 0xFFFF)
|
|
continue;
|
|
|
|
if (!MiiRead(Adapter, PhyAddress, MII_PHY_ID2, &PhyIdHigh))
|
|
continue;
|
|
if (PhyIdHigh == 0xFFFF)
|
|
continue;
|
|
|
|
Adapter->PhyAddress = PhyAddress;
|
|
Adapter->PhyModel = PhyIdHigh & PHYID2_MODEL_MASK;
|
|
Adapter->PhyOui = ((PhyIdLow & PHYID1_OUI_MASK) << PHYID1_OUI_SHFT) |
|
|
((PhyIdHigh & PHYID2_OUI_MASK) >> PHYID2_OUI_SHFT);
|
|
|
|
/* Realtek hardcoded PhyIdLow to all zero's on certain PHYs */
|
|
if (Adapter->PhyOui == PHY_OUI_REALTEK2)
|
|
Adapter->PhyOui = PHY_OUI_REALTEK;
|
|
|
|
/* Setup PHY revision for Realtek */
|
|
if (Adapter->PhyOui == PHY_OUI_REALTEK && Adapter->PhyModel == PHY_MODEL_REALTEK_8211)
|
|
{
|
|
ULONG PhyRevision;
|
|
|
|
MiiRead(Adapter, PhyAddress, PHY_REALTEK_REVISION, &PhyRevision);
|
|
Adapter->PhyRevision = PhyRevision & PHY_REV_MASK;
|
|
}
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("Found PHY %X %X %X\n",
|
|
Adapter->PhyAddress,
|
|
Adapter->PhyModel,
|
|
Adapter->PhyOui));
|
|
break;
|
|
}
|
|
if (Phy == 33)
|
|
{
|
|
return FALSE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
SidebandUnitAcquireSemaphore(
|
|
_Inout_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG i;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
for (i = 10; i > 0; --i)
|
|
{
|
|
if ((NV_READ(Adapter, NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_SEMA_MASK) ==
|
|
NVREG_XMITCTL_MGMT_SEMA_FREE)
|
|
{
|
|
break;
|
|
}
|
|
|
|
NdisMSleep(500000);
|
|
}
|
|
if (i == 0)
|
|
{
|
|
return FALSE;
|
|
}
|
|
|
|
for (i = 0; i < 2; ++i)
|
|
{
|
|
ULONG TxControl = NV_READ(Adapter, NvRegTransmitterControl);
|
|
|
|
NV_WRITE(Adapter, NvRegTransmitterControl, TxControl | NVREG_XMITCTL_HOST_SEMA_ACQ);
|
|
|
|
/* Verify that the semaphore was acquired */
|
|
TxControl = NV_READ(Adapter, NvRegTransmitterControl);
|
|
if (((TxControl & NVREG_XMITCTL_HOST_SEMA_MASK) == NVREG_XMITCTL_HOST_SEMA_ACQ) &&
|
|
((TxControl & NVREG_XMITCTL_MGMT_SEMA_MASK) == NVREG_XMITCTL_MGMT_SEMA_FREE))
|
|
{
|
|
Adapter->Flags |= NV_UNIT_SEMAPHORE_ACQUIRED;
|
|
return TRUE;
|
|
}
|
|
|
|
NdisStallExecution(50);
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
VOID
|
|
SidebandUnitReleaseSemaphore(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
if (Adapter->Flags & NV_UNIT_SEMAPHORE_ACQUIRED)
|
|
{
|
|
ULONG TxControl;
|
|
|
|
TxControl = NV_READ(Adapter, NvRegTransmitterControl);
|
|
TxControl &= ~NVREG_XMITCTL_HOST_SEMA_ACQ;
|
|
NV_WRITE(Adapter, NvRegTransmitterControl, TxControl);
|
|
}
|
|
}
|
|
|
|
static
|
|
CODE_SEG("PAGE")
|
|
BOOLEAN
|
|
SidebandUnitGetVersion(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_Out_ PULONG Version)
|
|
{
|
|
ULONG i, DataReady, DataReady2;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
DataReady = NV_READ(Adapter, NvRegTransmitterControl);
|
|
|
|
NV_WRITE(Adapter, NvRegMgmtUnitGetVersion, NVREG_MGMTUNITGETVERSION);
|
|
NV_WRITE(Adapter, NvRegTransmitterControl, DataReady ^ NVREG_XMITCTL_DATA_START);
|
|
|
|
for (i = 100000; i > 0; --i)
|
|
{
|
|
DataReady2 = NV_READ(Adapter, NvRegTransmitterControl);
|
|
|
|
if ((DataReady & NVREG_XMITCTL_DATA_READY) != (DataReady2 & NVREG_XMITCTL_DATA_READY))
|
|
{
|
|
break;
|
|
}
|
|
|
|
NdisStallExecution(50);
|
|
}
|
|
if (i == 0 || DataReady2 & NVREG_XMITCTL_DATA_ERROR)
|
|
{
|
|
return FALSE;
|
|
}
|
|
|
|
*Version = NV_READ(Adapter, NvRegMgmtUnitVersion) & NVREG_MGMTUNITVERSION;
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
BOOLEAN
|
|
MiiGetSpeedAndDuplex(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_Out_ PULONG MiiAdvertise,
|
|
_Out_ PULONG MiiLinkPartnerAbility,
|
|
_Out_ PULONG LinkSpeed,
|
|
_Out_ PBOOLEAN FullDuplex)
|
|
{
|
|
ULONG MiiStatus, AdvLpa;
|
|
|
|
*MiiAdvertise = 0;
|
|
*MiiLinkPartnerAbility = 0;
|
|
|
|
/* Link status is a latched-low bit, read it twice */
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_STATUS, &MiiStatus);
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_STATUS, &MiiStatus);
|
|
|
|
/* Check link status */
|
|
if (!(MiiStatus & MII_SR_LINK_STATUS))
|
|
{
|
|
/* No link detected - configure NIC for 10 MB HD */
|
|
*LinkSpeed = NVREG_LINKSPEED_10;
|
|
*FullDuplex = FALSE;
|
|
return FALSE;
|
|
}
|
|
|
|
/* If we are forcing speed and duplex */
|
|
if (Adapter->Flags & NV_FORCE_SPEED_AND_DUPLEX)
|
|
{
|
|
if (Adapter->Flags & NV_USER_SPEED_100)
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_100;
|
|
}
|
|
else
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_10;
|
|
}
|
|
*FullDuplex = !!(Adapter->Flags & NV_FORCE_FULL_DUPLEX);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Check auto-negotiation is complete */
|
|
if (!(MiiStatus & MII_SR_AUTONEG_COMPLETE))
|
|
{
|
|
/* Still in auto-negotiation - configure NIC for 10 MBit HD and wait */
|
|
*LinkSpeed = NVREG_LINKSPEED_10;
|
|
*FullDuplex = FALSE;
|
|
return FALSE;
|
|
}
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_AUTONEG_ADVERTISE, MiiAdvertise);
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_AUTONEG_LINK_PARTNER, MiiLinkPartnerAbility);
|
|
|
|
/* Gigabit ethernet */
|
|
if (Adapter->Flags & NV_GIGABIT_PHY)
|
|
{
|
|
ULONG MiiControl1000, MiiStatus1000;
|
|
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_MASTER_SLAVE_CONTROL, &MiiControl1000);
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_MASTER_SLAVE_STATUS, &MiiStatus1000);
|
|
|
|
if ((MiiControl1000 & MII_MS_CR_1000T_FD) && (MiiStatus1000 & MII_MS_SR_1000T_FD))
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_1000;
|
|
*FullDuplex = TRUE;
|
|
return TRUE;
|
|
}
|
|
}
|
|
|
|
AdvLpa = (*MiiAdvertise) & (*MiiLinkPartnerAbility);
|
|
if (AdvLpa & MII_LP_100T_FD)
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_100;
|
|
*FullDuplex = TRUE;
|
|
}
|
|
else if (AdvLpa & MII_LP_100T_HD)
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_100;
|
|
*FullDuplex = FALSE;
|
|
}
|
|
else if (AdvLpa & MII_LP_10T_FD)
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_10;
|
|
*FullDuplex = TRUE;
|
|
}
|
|
else if (AdvLpa & MII_LP_10T_HD)
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_10;
|
|
*FullDuplex = FALSE;
|
|
}
|
|
else
|
|
{
|
|
*LinkSpeed = NVREG_LINKSPEED_10;
|
|
*FullDuplex = FALSE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static
|
|
VOID
|
|
NvNetSetSpeedAndDuplex(
|
|
_In_ PNVNET_ADAPTER Adapter,
|
|
_In_ ULONG MiiAdvertise,
|
|
_In_ ULONG MiiLinkPartnerAbility)
|
|
{
|
|
ULONG PhyRegister, TxDeferral, PauseFlags, MiiExpansion;
|
|
BOOLEAN RestartTransmitter = FALSE, RestartReceiver = FALSE;
|
|
|
|
/* The transmitter and receiver must be restarted for safe update */
|
|
if (NV_READ(Adapter, NvRegTransmitterControl) & NVREG_XMITCTL_START)
|
|
{
|
|
RestartTransmitter = TRUE;
|
|
NvNetStopTransmitter(Adapter);
|
|
}
|
|
if (NV_READ(Adapter, NvRegReceiverControl) & NVREG_RCVCTL_START)
|
|
{
|
|
RestartReceiver = TRUE;
|
|
NvNetStopReceiver(Adapter);
|
|
}
|
|
|
|
if (Adapter->Flags & NV_GIGABIT_PHY)
|
|
{
|
|
PhyRegister = NV_READ(Adapter, NvRegSlotTime);
|
|
PhyRegister &= ~NVREG_SLOTTIME_1000_FULL;
|
|
if ((Adapter->LinkSpeed == NVREG_LINKSPEED_10) ||
|
|
(Adapter->LinkSpeed == NVREG_LINKSPEED_100))
|
|
{
|
|
PhyRegister |= NVREG_SLOTTIME_10_100_FULL;
|
|
}
|
|
else if (Adapter->LinkSpeed == NVREG_LINKSPEED_1000)
|
|
{
|
|
PhyRegister |= NVREG_SLOTTIME_1000_FULL;
|
|
}
|
|
NV_WRITE(Adapter, NvRegSlotTime, PhyRegister);
|
|
}
|
|
|
|
PhyRegister = NV_READ(Adapter, NvRegPhyInterface);
|
|
PhyRegister &= ~(PHY_HALF | PHY_100 | PHY_1000);
|
|
if (!Adapter->FullDuplex)
|
|
{
|
|
PhyRegister |= PHY_HALF;
|
|
}
|
|
if (Adapter->LinkSpeed == NVREG_LINKSPEED_100)
|
|
PhyRegister |= PHY_100;
|
|
else if (Adapter->LinkSpeed == NVREG_LINKSPEED_1000)
|
|
PhyRegister |= PHY_1000;
|
|
NV_WRITE(Adapter, NvRegPhyInterface, PhyRegister);
|
|
|
|
/* Setup the deferral register */
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_AUTONEG_EXPANSION, &MiiExpansion);
|
|
if (PhyRegister & PHY_RGMII)
|
|
{
|
|
if (Adapter->LinkSpeed == NVREG_LINKSPEED_1000)
|
|
{
|
|
TxDeferral = NVREG_TX_DEFERRAL_RGMII_1000;
|
|
}
|
|
else
|
|
{
|
|
if (!(MiiExpansion & MII_EXP_LP_AUTONEG) && !Adapter->FullDuplex &&
|
|
(Adapter->Features & DEV_HAS_COLLISION_FIX))
|
|
{
|
|
TxDeferral = NVREG_TX_DEFERRAL_RGMII_STRETCH_10;
|
|
}
|
|
else
|
|
{
|
|
TxDeferral = NVREG_TX_DEFERRAL_RGMII_STRETCH_100;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (!(MiiExpansion & MII_EXP_LP_AUTONEG) && !Adapter->FullDuplex &&
|
|
(Adapter->Features & DEV_HAS_COLLISION_FIX))
|
|
{
|
|
TxDeferral = NVREG_TX_DEFERRAL_MII_STRETCH;
|
|
}
|
|
else
|
|
{
|
|
TxDeferral = NVREG_TX_DEFERRAL_DEFAULT;
|
|
}
|
|
}
|
|
NV_WRITE(Adapter, NvRegTxDeferral, TxDeferral);
|
|
|
|
/* Setup the watermark register */
|
|
if (Adapter->Features & (DEV_HAS_HIGH_DMA | DEV_HAS_LARGEDESC))
|
|
{
|
|
if (Adapter->LinkSpeed == NVREG_LINKSPEED_1000)
|
|
NV_WRITE(Adapter, NvRegTxWatermark, NVREG_TX_WM_DESC2_3_1000);
|
|
else
|
|
NV_WRITE(Adapter, NvRegTxWatermark, NVREG_TX_WM_DESC2_3_DEFAULT);
|
|
}
|
|
else
|
|
{
|
|
NV_WRITE(Adapter, NvRegTxWatermark, NVREG_TX_WM_DESC1_DEFAULT);
|
|
}
|
|
|
|
NV_WRITE(Adapter, NvRegMisc1, NVREG_MISC1_FORCE | (Adapter->FullDuplex ? 0 : NVREG_MISC1_HD));
|
|
NV_WRITE(Adapter, NvRegLinkSpeed, Adapter->LinkSpeed | NVREG_LINKSPEED_FORCE);
|
|
|
|
PauseFlags = 0;
|
|
|
|
/* Setup pause frames */
|
|
if (Adapter->FullDuplex)
|
|
{
|
|
if (!(Adapter->Flags & NV_FORCE_SPEED_AND_DUPLEX) &&
|
|
(Adapter->PauseFlags & NV_PAUSEFRAME_AUTONEG))
|
|
{
|
|
ULONG AdvPause = MiiAdvertise & (MII_ADV_PAUSE_SYM | MII_ADV_PAUSE_ASYM);
|
|
ULONG LpaPause = MiiLinkPartnerAbility & (MII_LP_PAUSE_SYM | MII_LP_PAUSE_ASYM);
|
|
|
|
switch (AdvPause)
|
|
{
|
|
case MII_ADV_PAUSE_SYM:
|
|
{
|
|
if (LpaPause & MII_LP_PAUSE_SYM)
|
|
{
|
|
PauseFlags |= NV_PAUSEFRAME_RX_ENABLE;
|
|
|
|
if (Adapter->PauseFlags & NV_PAUSEFRAME_TX_REQ)
|
|
PauseFlags |= NV_PAUSEFRAME_TX_ENABLE;
|
|
}
|
|
break;
|
|
}
|
|
case MII_ADV_PAUSE_ASYM:
|
|
{
|
|
if (LpaPause == (MII_LP_PAUSE_SYM | MII_LP_PAUSE_ASYM))
|
|
{
|
|
PauseFlags |= NV_PAUSEFRAME_TX_ENABLE;
|
|
}
|
|
break;
|
|
}
|
|
case (MII_ADV_PAUSE_SYM | MII_ADV_PAUSE_ASYM):
|
|
{
|
|
if (LpaPause & MII_LP_PAUSE_SYM)
|
|
{
|
|
PauseFlags |= NV_PAUSEFRAME_RX_ENABLE;
|
|
|
|
if (Adapter->PauseFlags & NV_PAUSEFRAME_TX_REQ)
|
|
PauseFlags |= NV_PAUSEFRAME_TX_ENABLE;
|
|
}
|
|
if (LpaPause == MII_LP_PAUSE_ASYM)
|
|
{
|
|
PauseFlags |= NV_PAUSEFRAME_RX_ENABLE;
|
|
}
|
|
break;
|
|
}
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
PauseFlags = Adapter->PauseFlags;
|
|
}
|
|
}
|
|
NvNetUpdatePauseFrame(Adapter, PauseFlags);
|
|
|
|
if (RestartTransmitter)
|
|
{
|
|
NvNetStartTransmitter(Adapter);
|
|
}
|
|
if (RestartReceiver)
|
|
{
|
|
NvNetStartReceiver(Adapter);
|
|
}
|
|
}
|
|
|
|
BOOLEAN
|
|
NvNetUpdateLinkSpeed(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG MiiAdvertise, MiiLinkPartnerAbility, LinkSpeed;
|
|
BOOLEAN FullDuplex, LinkUp;
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
LinkUp = MiiGetSpeedAndDuplex(Adapter,
|
|
&MiiAdvertise,
|
|
&MiiLinkPartnerAbility,
|
|
&LinkSpeed,
|
|
&FullDuplex);
|
|
if (Adapter->FullDuplex == FullDuplex && Adapter->LinkSpeed == LinkSpeed)
|
|
{
|
|
return LinkUp;
|
|
}
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("Configuring MAC from '%lx %s-duplex' to '%lx %s-duplex'\n",
|
|
Adapter->LinkSpeed,
|
|
Adapter->FullDuplex ? "full" : "half",
|
|
LinkSpeed,
|
|
FullDuplex ? "full" : "half"));
|
|
|
|
Adapter->FullDuplex = FullDuplex;
|
|
Adapter->LinkSpeed = LinkSpeed;
|
|
|
|
if (Adapter->Flags & NV_ACTIVE)
|
|
{
|
|
NdisDprAcquireSpinLock(&Adapter->Send.Lock);
|
|
NdisDprAcquireSpinLock(&Adapter->Receive.Lock);
|
|
}
|
|
|
|
NvNetSetSpeedAndDuplex(Adapter, MiiAdvertise, MiiLinkPartnerAbility);
|
|
|
|
if (Adapter->Flags & NV_ACTIVE)
|
|
{
|
|
NdisDprReleaseSpinLock(&Adapter->Receive.Lock);
|
|
NdisDprReleaseSpinLock(&Adapter->Send.Lock);
|
|
}
|
|
|
|
return LinkUp;
|
|
}
|
|
|
|
CODE_SEG("PAGE")
|
|
NDIS_STATUS
|
|
NvNetPhyInit(
|
|
_In_ PNVNET_ADAPTER Adapter)
|
|
{
|
|
ULONG PhyState;
|
|
BOOLEAN RestorePhyState = FALSE, PhyInitialized = FALSE;
|
|
|
|
PAGED_CODE();
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("()\n"));
|
|
|
|
/* Take PHY and NIC out of low power mode */
|
|
if (Adapter->Features & DEV_HAS_POWER_CNTRL)
|
|
{
|
|
ULONG PowerState = NV_READ(Adapter, NvRegPowerState2);
|
|
|
|
PowerState &= ~NVREG_POWERSTATE2_POWERUP_MASK;
|
|
if ((Adapter->Features & DEV_NEED_LOW_POWER_FIX) && Adapter->RevisionId >= 0xA3)
|
|
{
|
|
PowerState |= NVREG_POWERSTATE2_POWERUP_REV_A3;
|
|
}
|
|
NV_WRITE(Adapter, NvRegPowerState2, PowerState);
|
|
}
|
|
|
|
/* Clear PHY state and temporarily halt PHY interrupts */
|
|
NV_WRITE(Adapter, NvRegMIIMask, 0);
|
|
PhyState = NV_READ(Adapter, NvRegAdapterControl);
|
|
if (PhyState & NVREG_ADAPTCTL_RUNNING)
|
|
{
|
|
RestorePhyState = TRUE;
|
|
|
|
PhyState &= ~NVREG_ADAPTCTL_RUNNING;
|
|
NV_WRITE(Adapter, NvRegAdapterControl, PhyState);
|
|
}
|
|
NV_WRITE(Adapter, NvRegMIIStatus, NVREG_MIISTAT_MASK_ALL);
|
|
|
|
if (Adapter->Features & DEV_HAS_MGMT_UNIT)
|
|
{
|
|
ULONG UnitVersion;
|
|
|
|
/* Management unit running on the MAC? */
|
|
if ((NV_READ(Adapter, NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST) &&
|
|
(NV_READ(Adapter, NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_PHY_INIT) &&
|
|
SidebandUnitAcquireSemaphore(Adapter) &&
|
|
SidebandUnitGetVersion(Adapter, &UnitVersion))
|
|
{
|
|
if (UnitVersion > 0)
|
|
{
|
|
if (NV_READ(Adapter, NvRegMgmtUnitControl) & NVREG_MGMTUNITCONTROL_INUSE)
|
|
Adapter->Flags |= NV_MAC_IN_USE;
|
|
else
|
|
Adapter->Flags &= ~NV_MAC_IN_USE;
|
|
}
|
|
else
|
|
{
|
|
Adapter->Flags |= NV_MAC_IN_USE;
|
|
}
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("Management unit is running. MAC in use\n"));
|
|
|
|
/* Management unit setup the PHY already? */
|
|
if ((Adapter->Flags & NV_MAC_IN_USE) &&
|
|
((NV_READ(Adapter, NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK) ==
|
|
NVREG_XMITCTL_SYNC_PHY_INIT))
|
|
{
|
|
/* PHY is inited by management unit */
|
|
PhyInitialized = TRUE;
|
|
|
|
NDIS_DbgPrint(MIN_TRACE, ("PHY already initialized by management unit\n"));
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Find a suitable PHY */
|
|
if (!FindPhyDevice(Adapter))
|
|
{
|
|
NDIS_DbgPrint(MAX_TRACE, ("Could not find a valid PHY\n"));
|
|
goto Failure;
|
|
}
|
|
|
|
/* We need to init the PHY */
|
|
if (!PhyInitialized)
|
|
{
|
|
if (!PhyInit(Adapter))
|
|
{
|
|
/* It's not critical for init, continue */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
ULONG MiiStatus;
|
|
|
|
/* See if it is a gigabit PHY */
|
|
MiiRead(Adapter, Adapter->PhyAddress, MII_STATUS, &MiiStatus);
|
|
if (MiiStatus & PHY_GIGABIT)
|
|
{
|
|
Adapter->Flags |= NV_GIGABIT_PHY;
|
|
}
|
|
}
|
|
|
|
return NDIS_STATUS_SUCCESS;
|
|
|
|
Failure:
|
|
if (RestorePhyState)
|
|
{
|
|
NV_WRITE(Adapter, NvRegAdapterControl, PhyState | NVREG_ADAPTCTL_RUNNING);
|
|
}
|
|
|
|
return NDIS_STATUS_FAILURE;
|
|
}
|