/*
 * Copyright (C) 1998-2005 ReactOS Team (and the authors from the programmers section)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 *
 *
 * PROJECT:         ReactOS kernel
 * FILE:            ntoskrnl/cache/section/fault.c
 * PURPOSE:         Consolidate fault handlers for sections
 *
 * PROGRAMMERS:     Arty
 *                  Rex Jolliff
 *                  David Welch
 *                  Eric Kohl
 *                  Emanuele Aliberti
 *                  Eugene Ingerman
 *                  Casper Hornstrup
 *                  KJK::Hyperion
 *                  Guido de Jong
 *                  Ge van Geldorp
 *                  Royce Mitchell III
 *                  Filip Navara
 *                  Aleksey Bragin
 *                  Jason Filby
 *                  Thomas Weidenmueller
 *                  Gunnar Andre' Dalsnes
 *                  Mike Nordell
 *                  Alex Ionescu
 *                  Gregor Anich
 *                  Steven Edwards
 *                  Herve Poussineau
 */

/*

I've generally organized fault handling code in newmm as handlers that run
under a single lock acquisition, check the state, and either take necessary
action atomically, or place a wait entry and return a continuation to the
caller.  This lends itself to code that has a simple, structured form,
doesn't make assumptions about lock taking and breaking, and provides an
obvious, graphic seperation between code that may block and code that isn't
allowed to.  This file contains the non-blocking half.

In order to request a blocking operation to happen outside locks, place a
function pointer in the provided MM_REQUIRED_RESOURCES struct and return
STATUS_MORE_PROCESSING_REQUIRED.  The function indicated will receive the
provided struct and take action outside of any mm related locks and at
PASSIVE_LEVEL.  The same fault handler will be called again after the
blocking operation succeeds.  In this way, the fault handler can accumulate
state, but will freely work while competing with other threads.

Fault handlers in this file should check for an MM_WAIT_ENTRY in a page
table they're using and return STATUS_SUCCESS + 1 if it's found.  In that
case, the caller will wait on the wait entry event until the competing thread
is finished, and recall this handler in the current thread.

Another thing to note here is that we require mappings to exactly mirror
rmaps, so each mapping should be immediately followed by an rmap addition.

*/

/* INCLUDES *****************************************************************/

#include <ntoskrnl.h>
#include "newmm.h"
#define NDEBUG
#include <debug.h>
#include <mm/ARM3/miarm.h>

#define DPRINTC DPRINT

extern KEVENT MmWaitPageEvent;

#ifdef NEWCC
extern PMMWSL MmWorkingSetList;

/*

Multiple stage handling of a not-present fault in a data section.

Required->State is used to accumulate flags that indicate the next action
the handler should take.

State & 2 is currently used to indicate that the page acquired by a previous
callout is a global page to the section and should be placed in the section
page table.

Note that the primitive tail recursion done here reaches the base case when
the page is present.

*/

NTSTATUS
NTAPI
MmNotPresentFaultCachePage (
    _In_ PMMSUPPORT AddressSpace,
    _In_ MEMORY_AREA* MemoryArea,
    _In_ PVOID Address,
    _In_ BOOLEAN Locked,
    _Inout_ PMM_REQUIRED_RESOURCES Required)
{
    NTSTATUS Status;
    PVOID PAddress;
    ULONG Consumer;
    PMM_SECTION_SEGMENT Segment;
    LARGE_INTEGER FileOffset, TotalOffset;
    ULONG_PTR Entry;
    ULONG Attributes;
    PEPROCESS Process = MmGetAddressSpaceOwner(AddressSpace);
    KIRQL OldIrql;

    DPRINT("Not Present: %p %p (%p-%p)\n",
           AddressSpace,
           Address,
           MA_GetStartingAddress(MemoryArea),
           MA_GetEndingAddress(MemoryArea));

    /*
     * There is a window between taking the page fault and locking the
     * address space when another thread could load the page so we check
     * that.
     */
    if (MmIsPagePresent(Process, Address))
    {
        DPRINT("Done\n");
        return STATUS_SUCCESS;
    }

    PAddress = MM_ROUND_DOWN(Address, PAGE_SIZE);
    TotalOffset.QuadPart = (ULONG_PTR)PAddress -
                           MA_GetStartingAddress(MemoryArea);

    Segment = MemoryArea->Data.SectionData.Segment;

    TotalOffset.QuadPart += MemoryArea->Data.SectionData.ViewOffset.QuadPart;
    FileOffset = TotalOffset;

    //Consumer = (Segment->Flags & MM_DATAFILE_SEGMENT) ? MC_CACHE : MC_USER;
    Consumer = MC_CACHE;

    if (Segment->FileObject)
    {
        __debugbreak();
        DPRINT("FileName %wZ\n", &Segment->FileObject->FileName);
    }

    DPRINT("Total Offset %08x%08x\n", TotalOffset.HighPart, TotalOffset.LowPart);

    /* Lock the segment */
    MmLockSectionSegment(Segment);

    /* Get the entry corresponding to the offset within the section */
    Entry = MmGetPageEntrySectionSegment(Segment, &TotalOffset);

    Attributes = PAGE_READONLY;

    if (Required->State && Required->Page[0])
    {
        DPRINT("Have file and page, set page %x in section @ %x #\n",
               Required->Page[0],
               TotalOffset.LowPart);

        if (Required->SwapEntry)
            MmSetSavedSwapEntryPage(Required->Page[0], Required->SwapEntry);

        if (Required->State & 2)
        {
            DPRINT("Set in section @ %x\n", TotalOffset.LowPart);
            Status = MmSetPageEntrySectionSegment(Segment,
                                                  &TotalOffset,
                                                  Entry = MAKE_PFN_SSE(Required->Page[0]));
            if (!NT_SUCCESS(Status))
            {
                MmReleasePageMemoryConsumer(MC_CACHE, Required->Page[0]);
            }
            MmUnlockSectionSegment(Segment);
            MiSetPageEvent(Process, Address);
            DPRINT("Status %x\n", Status);
            return STATUS_MM_RESTART_OPERATION;
        }
        else
        {
            DPRINT("Set %x in address space @ %p\n", Required->Page[0], Address);
            Status = MmCreateVirtualMapping(Process,
                                            Address,
                                            Attributes,
                                            Required->Page,
                                            1);
            if (NT_SUCCESS(Status))
            {
                MmInsertRmap(Required->Page[0], Process, Address);
            }
            else
            {
                /* Drop the reference for our address space ... */
                MmReleasePageMemoryConsumer(MC_CACHE, Required->Page[0]);
            }
            MmUnlockSectionSegment(Segment);
            DPRINTC("XXX Set Event %x\n", Status);
            MiSetPageEvent(Process, Address);
            DPRINT("Status %x\n", Status);
            return Status;
        }
    }
    else if (MM_IS_WAIT_PTE(Entry))
    {
        // Whenever MM_WAIT_ENTRY is required as a swap entry, we need to
        // ask the fault handler to wait until we should continue.  Rathern
        // than recopy this boilerplate code everywhere, we just ask them
        // to wait.
        MmUnlockSectionSegment(Segment);
        return STATUS_SUCCESS + 1;
    }
    else if (Entry)
    {
        PFN_NUMBER Page = PFN_FROM_SSE(Entry);
        DPRINT("Take reference to page %x #\n", Page);

        if (MiGetPfnEntry(Page) == NULL)
        {
            DPRINT1("Found no PFN entry for page 0x%x in page entry 0x%x (segment: 0x%p, offset: %08x%08x)\n",
                    Page,
                    Entry,
                    Segment,
                    TotalOffset.HighPart,
                    TotalOffset.LowPart);
            KeBugCheck(CACHE_MANAGER);
        }

        OldIrql = MiAcquirePfnLock();
        MmReferencePage(Page);
        MiReleasePfnLock(OldIrql);

        Status = MmCreateVirtualMapping(Process, Address, Attributes, &Page, 1);
        if (NT_SUCCESS(Status))
        {
            MmInsertRmap(Page, Process, Address);
        }
        DPRINT("XXX Set Event %x\n", Status);
        MiSetPageEvent(Process, Address);
        MmUnlockSectionSegment(Segment);
        DPRINT("Status %x\n", Status);
        return Status;
    }
    else
    {
        DPRINT("Get page into section\n");
        /*
         * If the entry is zero (and it can't change because we have
         * locked the segment) then we need to load the page.
         */
        //DPRINT1("Read from file %08x %wZ\n", FileOffset.LowPart, &Section->FileObject->FileName);
        Required->State = 2;
        Required->Context = Segment->FileObject;
        Required->Consumer = Consumer;
        Required->FileOffset = FileOffset;
        Required->Amount = PAGE_SIZE;
        Required->DoAcquisition = MiReadFilePage;

        MmSetPageEntrySectionSegment(Segment,
                                     &TotalOffset,
                                     MAKE_SWAP_SSE(MM_WAIT_ENTRY));

        MmUnlockSectionSegment(Segment);
        return STATUS_MORE_PROCESSING_REQUIRED;
    }
    ASSERT(FALSE);
    return STATUS_ACCESS_VIOLATION;
}

NTSTATUS
NTAPI
MiCopyPageToPage(PFN_NUMBER DestPage, PFN_NUMBER SrcPage)
{
    PEPROCESS Process;
    KIRQL Irql, Irql2;
    PVOID TempAddress, TempSource;

    Process = PsGetCurrentProcess();
    TempAddress = MiMapPageInHyperSpace(Process, DestPage, &Irql);
    if (TempAddress == NULL)
    {
        return STATUS_NO_MEMORY;
    }
    TempSource = MiMapPageInHyperSpace(Process, SrcPage, &Irql2);
    if (!TempSource) {
        MiUnmapPageInHyperSpace(Process, TempAddress, Irql);
        return STATUS_NO_MEMORY;
    }

    memcpy(TempAddress, TempSource, PAGE_SIZE);

    MiUnmapPageInHyperSpace(Process, TempSource, Irql2);
    MiUnmapPageInHyperSpace(Process, TempAddress, Irql);
    return STATUS_SUCCESS;
}

/*

This function is deceptively named, in that it does the actual work of handling
access faults on data sections.  In the case of the code that's present here,
we don't allow cow sections, but we do need this to unset the initial
PAGE_READONLY condition of pages faulted into the cache so that we can add
a dirty bit in the section page table on the first modification.

In the ultimate form of this code, CoW is reenabled.

*/

NTSTATUS
NTAPI
MiCowCacheSectionPage (
    _In_ PMMSUPPORT AddressSpace,
    _In_ PMEMORY_AREA MemoryArea,
    _In_ PVOID Address,
    _In_ BOOLEAN Locked,
    _Inout_ PMM_REQUIRED_RESOURCES Required)
{
    PMM_SECTION_SEGMENT Segment;
    PFN_NUMBER NewPage, OldPage;
    NTSTATUS Status;
    PVOID PAddress;
    LARGE_INTEGER Offset;
    PEPROCESS Process = MmGetAddressSpaceOwner(AddressSpace);

    DPRINT("MmAccessFaultSectionView(%p, %p, %p, %u)\n",
           AddressSpace,
           MemoryArea,
           Address,
           Locked);

    Segment = MemoryArea->Data.SectionData.Segment;

   /* Lock the segment */
    MmLockSectionSegment(Segment);

   /* Find the offset of the page */
    PAddress = MM_ROUND_DOWN(Address, PAGE_SIZE);
    Offset.QuadPart = (ULONG_PTR)PAddress - MA_GetStartingAddress(MemoryArea) +
                      MemoryArea->Data.SectionData.ViewOffset.QuadPart;

    if (!Segment->WriteCopy /*&&
        !MemoryArea->Data.SectionData.WriteCopyView*/ ||
        Segment->Image.Characteristics & IMAGE_SCN_MEM_SHARED)
    {
#if 0
        if (Region->Protect == PAGE_READWRITE ||
            Region->Protect == PAGE_EXECUTE_READWRITE)
#endif
        {
            ULONG_PTR Entry;
            DPRINTC("setting non-cow page %p %p:%p offset %I64x (%Ix) to writable\n",
                    Segment,
                    Process,
                    PAddress,
                    Offset.QuadPart,
                    MmGetPfnForProcess(Process, Address));
            if (Segment->FileObject)
            {
                DPRINTC("file %wZ\n", &Segment->FileObject->FileName);
            }
            Entry = MmGetPageEntrySectionSegment(Segment, &Offset);
            DPRINT("Entry %x\n", Entry);
            if (Entry &&
                !IS_SWAP_FROM_SSE(Entry) &&
                PFN_FROM_SSE(Entry) == MmGetPfnForProcess(Process, Address)) {

                MmSetPageEntrySectionSegment(Segment,
                                             &Offset,
                                             DIRTY_SSE(Entry));
            }
            MmSetPageProtect(Process, PAddress, PAGE_READWRITE);
            MmSetDirtyPage(Process, PAddress);
            MmUnlockSectionSegment(Segment);
            DPRINT("Done\n");
            return STATUS_SUCCESS;
        }
#if 0
        else
        {
            DPRINT("Not supposed to be writable\n");
            MmUnlockSectionSegment(Segment);
            return STATUS_ACCESS_VIOLATION;
        }
#endif
    }

    if (!Required->Page[0])
    {
        SWAPENTRY SwapEntry;
        if (MmIsPageSwapEntry(Process, Address))
        {
            MmGetPageFileMapping(Process, Address, &SwapEntry);
            MmUnlockSectionSegment(Segment);
            if (SwapEntry == MM_WAIT_ENTRY)
                return STATUS_SUCCESS + 1; // Wait ... somebody else is getting it right now
            else
                return STATUS_SUCCESS; // Nonwait swap entry ... handle elsewhere
        }
        /* Call out to acquire a page to copy to.  We'll be re-called when
         * the page has been allocated. */
        Required->Page[1] = MmGetPfnForProcess(Process, Address);
        Required->Consumer = MC_CACHE;
        Required->Amount = 1;
        Required->File = __FILE__;
        Required->Line = __LINE__;
        Required->DoAcquisition = MiGetOnePage;
        MmCreatePageFileMapping(Process, Address, MM_WAIT_ENTRY);
        MmUnlockSectionSegment(Segment);
        return STATUS_MORE_PROCESSING_REQUIRED;
    }

    NewPage = Required->Page[0];
    OldPage = Required->Page[1];

    DPRINT("Allocated page %x\n", NewPage);

    /* Unshare the old page */
    MmDeleteRmap(OldPage, Process, PAddress);

   /* Copy the old page */
    DPRINT("Copying\n");
    MiCopyPageToPage(NewPage, OldPage);

   /* Set the PTE to point to the new page */
    Status = MmCreateVirtualMapping(Process,
                                    Address,
                                    PAGE_READWRITE,
                                    &NewPage,
                                    1);

    if (!NT_SUCCESS(Status))
    {
        DPRINT1("MmCreateVirtualMapping failed, not out of memory\n");
        ASSERT(FALSE);
        MmUnlockSectionSegment(Segment);
        return Status;
    }

    MmInsertRmap(NewPage, Process, PAddress);
    MmReleasePageMemoryConsumer(MC_CACHE, OldPage);
    MmUnlockSectionSegment(Segment);

    DPRINT("Address 0x%p\n", Address);
    return STATUS_SUCCESS;
}
#endif

KEVENT MmWaitPageEvent;

#ifdef NEWCC
typedef struct _WORK_QUEUE_WITH_CONTEXT
{
    WORK_QUEUE_ITEM WorkItem;
    PMMSUPPORT AddressSpace;
    PMEMORY_AREA MemoryArea;
    PMM_REQUIRED_RESOURCES Required;
    NTSTATUS Status;
    KEVENT Wait;
    AcquireResource DoAcquisition;
} WORK_QUEUE_WITH_CONTEXT, *PWORK_QUEUE_WITH_CONTEXT;

/*

This is the work item used do blocking resource acquisition when a fault
handler returns STATUS_MORE_PROCESSING_REQUIRED.  It's used to allow resource
acquisition to take place on a different stack, and outside of any locks used
by fault handling, making recursive fault handling possible when required.

*/

_Function_class_(WORKER_THREAD_ROUTINE)
VOID
NTAPI
MmpFaultWorker(PVOID Parameter)
{
    PWORK_QUEUE_WITH_CONTEXT WorkItem = Parameter;

    DPRINT("Calling work\n");
    WorkItem->Status = WorkItem->Required->DoAcquisition(WorkItem->AddressSpace,
                                                         WorkItem->MemoryArea,
                                                         WorkItem->Required);
    DPRINT("Status %x\n", WorkItem->Status);
    KeSetEvent(&WorkItem->Wait, IO_NO_INCREMENT, FALSE);
}

/*

This code seperates the action of fault handling into an upper and lower
handler to allow the inner handler to optionally be called in work item
if the stack is getting too deep.  My experiments show that the third
recursive page fault taken at PASSIVE_LEVEL must be shunted away to a
worker thread.  In the ultimate form of this code, the primary fault handler
makes this decision by using a thread-local counter to detect a too-deep
fault stack and call the inner fault handler in a worker thread if required.

Note that faults are taken at passive level and have access to ordinary
driver entry points such as those that read and write files, and filesystems
should use paged structures whenever possible.  This makes recursive faults
both a perfectly normal occurrance, and a worthwhile case to handle.

The code below will repeatedly call MiCowSectionPage as long as it returns
either STATUS_SUCCESS + 1 or STATUS_MORE_PROCESSING_REQUIRED.  In the more
processing required case, we call out to a blocking resource acquisition
function and then recall the faut handler with the shared state represented
by the MM_REQUIRED_RESOURCES struct.

In the other case, we wait on the wait entry event and recall the handler.
Each time the wait entry event is signalled, one thread has removed an
MM_WAIT_ENTRY from a page table.

In the ultimate form of this code, there is a single system wide fault handler
for each of access fault and not present and each memory area contains a
function pointer that indicates the active fault handler.  Since the mm code
in reactos is currently fragmented, I didn't bring this change to trunk.

*/

NTSTATUS
NTAPI
MmpSectionAccessFaultInner(KPROCESSOR_MODE Mode,
                           PMMSUPPORT AddressSpace,
                           ULONG_PTR Address,
                           BOOLEAN FromMdl,
                           PETHREAD Thread)
{
    MEMORY_AREA* MemoryArea;
    NTSTATUS Status;
    BOOLEAN Locked = FromMdl;
    MM_REQUIRED_RESOURCES Resources = { 0 };
    WORK_QUEUE_WITH_CONTEXT Context;

    RtlZeroMemory(&Context, sizeof(WORK_QUEUE_WITH_CONTEXT));

    DPRINT("MmAccessFault(Mode %d, Address %Ix)\n", Mode, Address);

    if (KeGetCurrentIrql() >= DISPATCH_LEVEL)
    {
        DPRINT1("Page fault at high IRQL was %u\n", KeGetCurrentIrql());
        return STATUS_UNSUCCESSFUL;
    }

    /* Find the memory area for the faulting address */
    if (Address >= (ULONG_PTR)MmSystemRangeStart)
    {
        /* Check permissions */
        if (Mode != KernelMode)
        {
            DPRINT("MmAccessFault(Mode %d, Address %Ix)\n", Mode, Address);
            return STATUS_ACCESS_VIOLATION;
        }
        AddressSpace = MmGetKernelAddressSpace();
    }
    else
    {
        AddressSpace = &PsGetCurrentProcess()->Vm;
    }

    if (!FromMdl)
    {
        MmLockAddressSpace(AddressSpace);
    }

    do
    {
        MemoryArea = MmLocateMemoryAreaByAddress(AddressSpace, (PVOID)Address);
        if (MemoryArea == NULL ||
            MemoryArea->DeleteInProgress)
        {
            if (!FromMdl)
            {
                MmUnlockAddressSpace(AddressSpace);
            }
            DPRINT("Address: %Ix\n", Address);
            return STATUS_ACCESS_VIOLATION;
        }

        DPRINT("Type %x (%p -> %p)\n",
               MemoryArea->Type,
               MA_GetStartingAddress(MemoryArea),
               MA_GetEndingAddress(MemoryArea));

        Resources.DoAcquisition = NULL;

        // Note: fault handlers are called with address space locked
        // We return STATUS_MORE_PROCESSING_REQUIRED if anything is needed
        Status = MiCowCacheSectionPage(AddressSpace,
                                       MemoryArea,
                                       (PVOID)Address,
                                       Locked,
                                       &Resources);

        if (!FromMdl)
        {
            MmUnlockAddressSpace(AddressSpace);
        }

        if (Status == STATUS_SUCCESS + 1)
        {
            /* Wait page ... */
            DPRINT("Waiting for %Ix\n", Address);
            MiWaitForPageEvent(MmGetAddressSpaceOwner(AddressSpace), Address);
            DPRINT("Restarting fault %Ix\n", Address);
            Status = STATUS_MM_RESTART_OPERATION;
        }
        else if (Status == STATUS_MM_RESTART_OPERATION)
        {
            /* Clean slate */
            RtlZeroMemory(&Resources, sizeof(Resources));
        }
        else if (Status == STATUS_MORE_PROCESSING_REQUIRED)
        {
            if (Thread->ActiveFaultCount > 0)
            {
                DPRINT("Already fault handling ... going to work item (%Ix)\n",
                       Address);
                Context.AddressSpace = AddressSpace;
                Context.MemoryArea = MemoryArea;
                Context.Required = &Resources;
                KeInitializeEvent(&Context.Wait, NotificationEvent, FALSE);

                ExInitializeWorkItem(&Context.WorkItem,
                                     MmpFaultWorker,
                                     &Context);

                DPRINT("Queue work item\n");
                ExQueueWorkItem(&Context.WorkItem, DelayedWorkQueue);
                DPRINT("Wait\n");
                KeWaitForSingleObject(&Context.Wait, 0, KernelMode, FALSE, NULL);
                Status = Context.Status;
                DPRINT("Status %x\n", Status);
            }
            else
            {
                Status = Resources.DoAcquisition(AddressSpace, MemoryArea, &Resources);
            }

            if (NT_SUCCESS(Status))
            {
                Status = STATUS_MM_RESTART_OPERATION;
            }
        }

        if (!FromMdl)
        {
            MmLockAddressSpace(AddressSpace);
        }
    }
    while (Status == STATUS_MM_RESTART_OPERATION);

    if (!NT_SUCCESS(Status) && MemoryArea->Type == 1)
    {
        DPRINT1("Completed page fault handling %Ix %x\n", Address, Status);
        DPRINT1("Type %x (%p -> %p)\n",
                MemoryArea->Type,
                MA_GetStartingAddress(MemoryArea),
                MA_GetEndingAddress(MemoryArea));
    }

    if (!FromMdl)
    {
        MmUnlockAddressSpace(AddressSpace);
    }

    return Status;
}

/*

This is the outer fault handler mentioned in the description of
MmpSectionAccsesFaultInner.  It increments a fault depth count in the current
thread.

In the ultimate form of this code, the lower fault handler will optionally
use the count to keep the kernel stack from overflowing.

*/

NTSTATUS
NTAPI
MmAccessFaultCacheSection(KPROCESSOR_MODE Mode,
                          ULONG_PTR Address,
                          BOOLEAN FromMdl)
{
    PETHREAD Thread;
    PMMSUPPORT AddressSpace;
    NTSTATUS Status;

    DPRINT("MmpAccessFault(Mode %d, Address %Ix)\n", Mode, Address);

    Thread = PsGetCurrentThread();

    if (KeGetCurrentIrql() >= DISPATCH_LEVEL)
    {
        DPRINT1("Page fault at high IRQL %u, address %Ix\n",
                KeGetCurrentIrql(),
                Address);
        return STATUS_UNSUCCESSFUL;
    }

    /* Find the memory area for the faulting address */
    if (Address >= (ULONG_PTR)MmSystemRangeStart)
    {
        /* Check permissions */
        if (Mode != KernelMode)
        {
            DPRINT1("Address: %p:%Ix\n", PsGetCurrentProcess(), Address);
            return STATUS_ACCESS_VIOLATION;
        }
        AddressSpace = MmGetKernelAddressSpace();
    }
    else
    {
        AddressSpace = &PsGetCurrentProcess()->Vm;
    }

    Thread->ActiveFaultCount++;
    Status = MmpSectionAccessFaultInner(Mode,
                                        AddressSpace,
                                        Address,
                                        FromMdl,
                                        Thread);
    Thread->ActiveFaultCount--;

    return Status;
}

/*

As above, this code seperates the active part of fault handling from a carrier
that can use the thread's active fault count to determine whether a work item
is required.  Also as above, this function repeatedly calls the active not
present fault handler until a clear success or failure is received, using a
return of STATUS_MORE_PROCESSING_REQUIRED or STATUS_SUCCESS + 1.

*/

NTSTATUS
NTAPI
MmNotPresentFaultCacheSectionInner(KPROCESSOR_MODE Mode,
                                   PMMSUPPORT AddressSpace,
                                   ULONG_PTR Address,
                                   BOOLEAN FromMdl,
                                   PETHREAD Thread)
{
    BOOLEAN Locked = FromMdl;
    PMEMORY_AREA MemoryArea;
    MM_REQUIRED_RESOURCES Resources = { 0 };
    WORK_QUEUE_WITH_CONTEXT Context;
    NTSTATUS Status = STATUS_SUCCESS;

    RtlZeroMemory(&Context, sizeof(WORK_QUEUE_WITH_CONTEXT));

    if (!FromMdl)
    {
        MmLockAddressSpace(AddressSpace);
    }

    /* Call the memory area specific fault handler */
    do
    {
        MemoryArea = MmLocateMemoryAreaByAddress(AddressSpace, (PVOID)Address);
        if (MemoryArea == NULL || MemoryArea->DeleteInProgress)
        {
            Status = STATUS_ACCESS_VIOLATION;
            if (MemoryArea)
            {
                DPRINT1("Type %x DIP %x\n",
                        MemoryArea->Type,
                        MemoryArea->DeleteInProgress);
            }
            else
            {
                DPRINT1("No memory area\n");
            }
            DPRINT1("Process %p, Address %Ix\n",
                    MmGetAddressSpaceOwner(AddressSpace),
                    Address);
            break;
        }

        DPRINTC("Type %x (%p -> %08Ix -> %p) in %p\n",
                MemoryArea->Type,
                MA_GetStartingAddress(MemoryArea),
                Address,
                MA_GetEndingAddress(MemoryArea),
                PsGetCurrentThread());

        Resources.DoAcquisition = NULL;

        // Note: fault handlers are called with address space locked
        // We return STATUS_MORE_PROCESSING_REQUIRED if anything is needed

        Status = MmNotPresentFaultCachePage(AddressSpace,
                                            MemoryArea,
                                            (PVOID)Address,
                                            Locked,
                                            &Resources);

        if (!FromMdl)
        {
            MmUnlockAddressSpace(AddressSpace);
        }

        if (Status == STATUS_SUCCESS)
        {
            ; // Nothing
        }
        else if (Status == STATUS_SUCCESS + 1)
        {
            /* Wait page ... */
            DPRINT("Waiting for %Ix\n", Address);
            MiWaitForPageEvent(MmGetAddressSpaceOwner(AddressSpace), Address);
            DPRINT("Done waiting for %Ix\n", Address);
            Status = STATUS_MM_RESTART_OPERATION;
        }
        else if (Status == STATUS_MM_RESTART_OPERATION)
        {
            /* Clean slate */
            DPRINT("Clear resource\n");
            RtlZeroMemory(&Resources, sizeof(Resources));
        }
        else if (Status == STATUS_MORE_PROCESSING_REQUIRED)
        {
            if (Thread->ActiveFaultCount > 2)
            {
                DPRINTC("Already fault handling ... going to work item (%Ix)\n", Address);
                Context.AddressSpace = AddressSpace;
                Context.MemoryArea = MemoryArea;
                Context.Required = &Resources;
                KeInitializeEvent(&Context.Wait, NotificationEvent, FALSE);

                ExInitializeWorkItem(&Context.WorkItem,
                                     (PWORKER_THREAD_ROUTINE)MmpFaultWorker,
                                     &Context);

                DPRINT("Queue work item\n");
                ExQueueWorkItem(&Context.WorkItem, DelayedWorkQueue);
                DPRINT("Wait\n");
                KeWaitForSingleObject(&Context.Wait, 0, KernelMode, FALSE, NULL);
                Status = Context.Status;
                DPRINTC("Status %x\n", Status);
            }
            else
            {
                DPRINT("DoAcquisition %p\n", Resources.DoAcquisition);

                Status = Resources.DoAcquisition(AddressSpace,
                                                 MemoryArea,
                                                 &Resources);

                DPRINT("DoAcquisition %p -> %x\n",
                       Resources.DoAcquisition,
                       Status);
            }

            if (NT_SUCCESS(Status))
            {
                Status = STATUS_MM_RESTART_OPERATION;
            }
        }
        else if (NT_SUCCESS(Status))
        {
            ASSERT(FALSE);
        }

        if (!FromMdl)
        {
            MmLockAddressSpace(AddressSpace);
        }
    }
    while (Status == STATUS_MM_RESTART_OPERATION);

    DPRINTC("Completed page fault handling: %p:%Ix %x\n",
            MmGetAddressSpaceOwner(AddressSpace),
            Address,
            Status);

    if (!FromMdl)
    {
        MmUnlockAddressSpace(AddressSpace);
    }

    MiSetPageEvent(MmGetAddressSpaceOwner(AddressSpace), Address);
    DPRINT("Done %x\n", Status);

    return Status;
}

/*

Call the inner not present fault handler, keeping track of the fault count.
In the ultimate form of this code, optionally use a worker thread the handle
the fault in order to sidestep stack overflow in the multiple fault case.

*/

NTSTATUS
NTAPI
MmNotPresentFaultCacheSection(KPROCESSOR_MODE Mode,
                              ULONG_PTR Address,
                              BOOLEAN FromMdl)
{
    PETHREAD Thread;
    PMMSUPPORT AddressSpace;
    NTSTATUS Status;

    Address &= ~(PAGE_SIZE - 1);
    DPRINT("MmNotPresentFault(Mode %d, Address %Ix)\n", Mode, Address);

    Thread = PsGetCurrentThread();

    if (KeGetCurrentIrql() >= DISPATCH_LEVEL)
    {
        DPRINT1("Page fault at high IRQL %u, address %Ix\n",
                KeGetCurrentIrql(),
                Address);

        ASSERT(FALSE);
        return STATUS_UNSUCCESSFUL;
    }

    /* Find the memory area for the faulting address */
    if (Address >= (ULONG_PTR)MmSystemRangeStart)
    {
        /* Check permissions */
        if (Mode != KernelMode)
        {
            DPRINTC("Address: %x\n", Address);
            return STATUS_ACCESS_VIOLATION;
        }
        AddressSpace = MmGetKernelAddressSpace();
    }
    else
    {
        AddressSpace = &PsGetCurrentProcess()->Vm;
    }

    Thread->ActiveFaultCount++;
    Status = MmNotPresentFaultCacheSectionInner(Mode,
                                                AddressSpace,
                                                Address,
                                                FromMdl,
                                                Thread);
    Thread->ActiveFaultCount--;

    ASSERT(Status != STATUS_UNSUCCESSFUL);
    ASSERT(Status != STATUS_INVALID_PARAMETER);
    DPRINT("MmAccessFault %p:%Ix -> %x\n",
           MmGetAddressSpaceOwner(AddressSpace),
           Address,
           Status);

    return Status;
}
#endif