Add "Lucida Console" fonts. CORE-16264
- Add "Lucida Console" font by duplicating "DejaVu Sans Mono" font and renaming it.
- Delete some "Lucida Console" font substitutes.
- Add LICENSE file.
I used FontForge to rename it. Its family name is "Lucida Console". Its display name is "Lucida Console". Its font filename is lucon.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Trebuchet MS" fonts. CORE-16272
- Add "Trebuchet MS", "Trebuchet MS Bold", "Trebuchet MS Bold Italic" and "Trebuchet MS Italic" fonts by duplicating "Open Sans" fonts and renaming them.
- Delete some "Trebuchet MS" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Trebuchet MS". Their display names are "Trebuchet MS", "Trebuchet MS Bold", "Trebuchet MS Bold Italic" and "Trebuchet MS Italic". Their font filenames are trebuc.ttf, trebucbd.ttf, trebucbi.ttf and trebucit.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Times New Roman" fonts. CORE-16272
- Add "Times New Roman" and "Times New Roman Italic" fonts by duplicating "Liberation Serif" fonts and renaming them.
- Delete some "Times New Roman" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Times New Roman". Their display names are "Times New Roman", "Times New Roman Bold", "Times New Roman Bold Italic" and "Times New Roman Italic". Their font filenames are times.ttf, timesbd.ttf, timesbi.ttf and timesi.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Franklin Gothic Medium" fonts. CORE-16272
- Add "Franklin Gothic Medium" and "Franklin Gothic Medium Italic" fonts by duplicating Alexei Vanyashin's "Libre Franklin" fonts and renaming them.
- Delete some "Franklin Gothic Medium" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Franklin Gothic Medium". Their display names are "Franklin Gothic Medium" and "Franklin Gothic Medium Italic". Their font filenames are framd.ttf and framdit.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Alexei Vanyashin's "Libre Franklin" fonts are available at https://github.com/alexeiva/Libre-Franklin .
Add "Palatino Linotype" fonts. CORE-16272
- Add "Palatino Linotype", "Palatino Linotype Bold", "Palatino Linotype Bold Italic" and "Palatino Linotype Italic" fonts by duplicating "DejaVu Serif" fonts and renaming them.
- Delete some "Palatino Linotype" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Palatino Linotype". Their display names are "Palatino Linotype", "Palatino Linotype Bold", "Palatino Linotype Bold Italic" and "Palatino Linotype Italic". Their font filenames are pala.ttf, palab.ttf, palabi.ttf and palai.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Geogia" fonts. CORE-16272
- Add "Geogia", "Geogia Bold", "Geogia Bold Italic" and "Geogia Italic" fonts by duplicating FreeSerif fonts and renaming them.
- Delete some "Geogia" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Geogia". Their display names are "Geogia", "Geogia Bold", "Geogia Bold Italic" and "Geogia Italic". Their font filenames are georgia.ttf, georgiab.ttf, georgiaz.ttf and georgiai.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Courier New" fonts. CORE-16272
- Add "Courier New", "Courier New Bold", "Courier New Bold Italic" and "Courier New Italic" fonts by duplicating FreeMono fonts and renaming them.
- Delete some "Courier New" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Courier New". Their display names are "Courier New", "Courier New Bold", "Courier New Bold Italic" and "Courier New Italic". Their font filenames are cour.ttf, courbd.ttf, courbi.ttf and couri.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add Arial fonts. CORE-16272
- Add "Arial", "Arial Bold", "Arial Bold Italic" and "Arial Italic" fonts by duplicating Liberation Sans fonts and renaming them.
- Disable some Arial font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Arial". Their display names are "Arial", "Arial Bold", "Arial Bold Italic" and "Arial Italic". Their font filenames are arial.ttf, arialbd.ttf, arialbi.ttf and ariali.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
By removing font substitution for 'Microsoft Sans Serif'.
Thanks to the patches author Katayama Hirofumi MZ.
This is a partial revert of the guilty rev
master guilty 0.4.13-dev-9-g
811faed421
RC guilty 0.4.12-RC-13-g
8d3def0529
VBox test result:
https://reactos.org/testman/compare.php?ids=68497,68499
The same fix has been applied before to 0.4.12-RC-44-g
ca0e00e8af
Eliminate some bugs about font enumeration. CORE-15755
- Add "Microsoft Sans Serif" font substitution.
- Fix and improve the treatment of the nominal font names.
- Split IntGetFontFamilyInfo function from NtGdiGetFontFamilyInfo.
- Add DoFontSystemUnittest function for font system unittest to GDI32.
- Call DoFontSystemUnittest function at CreateFontIndirectW first call.
Nowadays more and more people try to install ReactOS from removable
drives (e.g. USB sticks) onto fixed HDDs, or try to install it into
USB sticks too.
Both fixed and removable drives, as well as partitions on these, are
represented in NT using the same device name format:
\Device\HarddiskM\PartitionN ,
with an increasing disk number M. Using this number for building the
corresponding firmware-specific ARC multi(x)disk(y)rdisk(z) path used
by the NT/ROS loader (FreeLdr, ...) is then prone to error since there
may have been removable drives inserted and accounted for in the
calculation of the disk number. These drives must be correctly
subtracted in order to generate the correct ARC path, valid once all
the removable drives have been ejected (which should also be the
situation seen from the BIOS when booting up, except of course if you
boot on a USB stick).
This problem is now solved. Note that it matters only for the disks
that have also been enumerated by the firmware (BIOS; Int 13h). We
don't have to care about the other drives, since the ARC path will be
of a different format and will not use the disk number (instead, the
SCSI coordinates are used).
We also try to enumerate all the disks found in all the possible disk
adapters and controllers enumerated in the Hardware registry tree
(and that are visible by FreeLdr) in order to cover all.
Finally, we detect whether a disk reports as a "super-floppy", i.e.
an unpartitioned disk with a valid VBR. This is indeed how a standard
floppy disk looks like, or how USB sticks are partitioned on Windows.
Such disk is reported has having only one single partition starting at
the beginning of the disk, with partition number == 0, its type being
FAT16 non-bootable.
This allows us to forbid creating any new partitions on such disks.
Note that accessing either \Device\HarddiskN\Partition0 or Partition1
on such a disk returns the same data.
Note also that on the contrary, regular MBR-partitioned disks would
report at least four partitions entries, instead of just one.
The other improvements are:
- Do *NOT* write any MBR on a disk partitioned as "super-floppy".
CORE-13703
- Fix the computed disk identifier, of format: %08x-%08x-%c .
The numbers are respectively the checksum of the first sector, and
the disk signature. The terminating letter is A or X, depending
whether the first sector ends with 0x55AA/0xAA55 or not (see also
commit 5053f1f5).
- Warn if the user attempts to install ReactOS on a disk that is not
visible by the firmware of his computer, because it may not be
bootable.
- Add also some validation ASSERTs and simplify the code here and there.
- The installation partition is called "InstallPartition", while the
global "CurrentPartition" is the disk region currently selected in
the partition UI list, on which prtitioning operations are effectued.
- Extend CheckActiveSystemPartition() to use an optional alternative
disk or partition in case the actual system partition (present in the
first disk) cannot be used, e.g. because we don't support writes on it.
- Make some partitioning functions not dependent on the selected "CurrentPartition".
- Add some sanity checks.
- Improve some of the "is-partitioned" checks.
Similarly to FMIFS this structure should be private. Instead file-system
names are passed to the helper functions, allowing to use the names
returned by the FS drivers. The names are then internally mapped to the
corresponding FS providers.
In particular this allows to handle the "RAW" file-system and to assign
the 'Unformatted' flag to partitions having this FS.
Finally this helps us refining the checks performed to see whether the
current "active" system partition uses a supported file-system.
- Within the function's body code, check the status values returned by the called functions.
- Change the BuildInstallPaths's function type to NTSTATUS instead of VOID (and check the status of InitDestinationPaths() as well.
By default, we still fallback to FAT if nothing asked, or if there
is an invalid input.
0 is FAT, 1 is BtrFS. This can be grown as soon as we add more IFS.
- Add checks for GPT disks and either fail or ignore the disk,
depending on the operation being executed.
[USETUP][REACTOS] Display the disk style more accurately.
CORE-7749
- Correctly insert discovered partitions in sorted order of StartSector,
and verify that they do not overlap (-> check for broken partitioning).
May help for CORE-10898.
- Use the correct reported partition numbers that may be modified after
partitioning changes, and that need to be used when opening
\Device\Harddisk'M'\Partition'N' files. This is achieving by
retrieving the returned value of the IOCTL_DISK_SET_DRIVE_LAYOUT call.
Distinguish them from the "on-disk" partition numbers that are the ones
that enumerate the partition in partition-table order (and is the order
known by e.g. the BIOS), and that should be used to construct the
destination ARC path.
May help for CORE-4870, CORE-13205.
- Simplify a lot of duplicated code by using helper functions.
Always perform the partition validity checks when creating new
primary/extended/logical partitions, and also when a new partition
is automatically created when unpartitioned space is selected for
ReactOS installation.
CORE-12246
This will allow compatibility with modern OSes and
modern disk management utilities.
It will also improve performances by properly aligning
partition start.
And it will let enough room at the begin of the disk
for 3rd party bootloaders.
WARNING: this is not compatible with previous partition
model, and old one will likely not be compatible. You'll
have to erase your whole partition table and start from
scratch.
- SETUPLIB and USETUP: Convert PARTENTRY::DriveLetter to WCHAR.
- SETUPLIB: Retrieve volume label.
- SETUPLIB and USETUP: Move the partition types (IDs) table from
USETUP to SETUPLIB so that they can share it with the 1st-stage
GUI installer too. Also take the opportunity to update the table
with information from http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
and cross-checked with the list from Paragon Hard-Disk Manager.
- USETUP: Simplify PrintPartitionData().
- Add some code comments.
- BOOTDATA: Use standard INF signature string, so that they can be
opened successfully using ReactOS' or Windows' setupapi.dll with
the INF_STYLE_WIN4 style.
- SETUPLIB: Use the correct INF_STYLE_* INF styles in SpInfOpenInfFile() calls.
- REACTOS : Switch thread locale to user-specified LocaleId when calling
SetupOpenInfFileW(), so that the correct localized strings are used.
- In PrepareCopyInfFile(), explicitly use AddSectionToCopyQueueCab()
to retrieve the files from the CAB INF.
Otherwise if one continued to use and rely on AddSectionToCopyQueue()
to do this job instead, bad things could happen like, re-enumerating
twice or more (and adding them to the file queue) the same files.
This is because in the new code AddSectionToCopyQueue() can be called
many times to deal with different SIF file sections. The old code then
called AddSectionToCopyQueueCab() in turn, but on the same list...
Now the steps performed are clear, and everything works as intended.
- Simplify the code that computes the full source and destination paths
for the files to be copied and directories to be created, using helper
functions.
- Compute the source file and target location from the TXTSETUP.SIF
entries in a NT-compatible manner.
- Use adequate access flag when opening symbolic links.
- Simplify the prototype of UpdateRegistry() since now both Setup INF
handle and settings lists are inside the USETUP_DATA structure.
This allows using some of the SetupApi.dll functions when SETUPLIB is
used in the (Win32) GUI 1st-stage installer "REACTOS", while using the
custom implemented NT-aware functions in "USETUP".
- Move a great deal of global variables into the USETUP_DATA structure
(the SetupInf, the SetupFileQueue, the generic lists...).
- Place the common setup initialization code into an InitializeSetup()
routine, and the cleanup code into FinishSetup().
- Implement the setup-code part support for the TXTSETUP.SIF setup
source path override variables "SetupSourceDevice" and "SetupSourcePath"
(see CORE-9023); support for them in SETUPLDR will be added later.
This includes also to remove the created symlinks.
Symlinks deletion is special, as one has to open first the symlink
itself (and not its target), then remove the "SymbolicLinkTarget" value
before really deleting the key. Of course everything must be done under
proper access rights.
Additional changes:
- Change prototype BOOLEAN CmpLinkKeyToHive(...) to NTSTATUS CreateSymLinkKey(...).
- Silence few DPRINTs.
- Document some FIXMEs that I need to inspect later on ReactOS.
- HKEY --> HANDLE.
- It can therefore be also used by the 1st-stage GUI setup.
- Rename some function parameters to clarify what they should be.
Based on:
svn path=/branches/setup_improvements/; revision=75750
