Add two hacks in UpdateDiskLayout() and WritePartitions() so that the
disk partition style is consistently set to a known value MBR, especially
when that disk was previously new and uninitialized (RAW).
A proper fix will be developed later when support for GPT is added.
Instead of providing an MBR partition type to InferFileSystem(), make
it call IOCTL_DISK_GET_PARTITION_INFO(_EX) to determine whether the
partition pointed by the path/handle is MBR or GPT. Then, only if it's
MBR, we retrieve its partition type in order to "guess" an adequate file
system name, in case the latter was not recognized already via regular
ways (via GetFileSystemName() / NtQueryVolumeInformationFile()).
- Remove the GetFileSystemNameByHandle() and InferFileSystemByHandle()
functions. Instead, make the other GetFileSystemName*() and
InferFileSystem*() functions accept a HANDLE as an alternative to the
already-existing partition path string. These parameters are exclusive
to each other.
- Rename SetPartitionType() -> SetMBRPartitionType(),
and FileSystemToPartitionType() -> FileSystemToMBRPartitionType()
in order to really clarify what they do (since this code is meant
for MBR partitions only, not GPT ones).
CORE-16274
SETUPLIB:
=========
- Find the system partition initially when we create the list of
partitions.
- Split the old CheckActiveSystemPartition() helper in two helpers:
FindSupportedSystemPartition() and SetActivePartition(). This allows
simplifying slightly the former one, and allows the user, in an
interactive situation, to decide whether the "supported system
partition" found can actually be used or not.
- Remove the "OriginalSystemPartition" hack in the PARTLIST structure.
- Add a note regarding the SystemPartition member in PARTLIST.
USETUP:
=======
- Use the introduced helpers from above. If the "system" partition we
are going to use, in case we install ReactOS on a fixed disk, is *NOT*
the same as the original one (e.g. because it is detected to be not
supported by ReactOS...), display an informative screen to the user
and let him confirm whether or not he wants to change the partition.
If we install on a fixed disk, try to find a supported system partition
on the system. Otherwise if we install on a removable disk, use the
install partition as the system partition instead.
This allows providing a fix for CORE-16274.
SETUPLIB:
=========
- Remove useless HiddenSectors member in PARTENTRY structure.
- InsertDiskRegion() helper returns a BOOLEAN success.
- CreateInsertBlankRegion() helper sets LogicalPartition.
- Simplify the InitializePartitionEntry() helper so that its PartEntry
parameter is clearly the one that is being initialized (i.e. converted
from a blank region to) an actual partition, and use the helper
CreateInsertBlankRegion(). The calculations for the StartSector and
SectorCount are exactly equivalent with the old version of this
function. Also make it return a BOOLEAN success instead.
+ Add some extra validation checks.
+ Adjust CreatePrimaryPartition(), CreateExtendedPartition() and
CreateLogicalPartition() in this regard.
- Better handling of "RAW"-mounted partitions: treat them as
"Unformatted" only if they are RAW *AND* their PartitionType is one of
those associated with FAT file-system. Otherwise we cannot decide
whether they are indeed unformatted or have an unknown file-system on
them, therefore treat them as the latter.
In this regard, the IsSupportedActivePartition() helper should not
look for FileSystem == RAW but instead only look whether the partition
is Unformatted.
This should help with situations similar to the one described in CORE-16274
where a partition with a genuine file-system but not recognized by
ReactOS (because we currently do not have the EXT2/3/4 filesystem
driver loaded during 1st-stage setup due to commit 5a650f6b) and
therefore mounted as RAW, was thought to be unformatted.
USETUP:
=======
- Use the "global" SystemPartition pointer: this is the "system"
partition we will actually use. It can be different from the actual
one of the computer, for example when we install ReactOS on a
removable disk. This allows also to simplify the code.
- Remove the single-used DestinationDriveLetter variable.
- Remove BuildInstallPaths() helper and use InitDestinationPaths()
directly instead.
- Always mention the disk where the partition being formatted is.
- Cleanup old code comments, add assertions here & there...
Nowadays more and more people try to install ReactOS from removable
drives (e.g. USB sticks) onto fixed HDDs, or try to install it into
USB sticks too.
Both fixed and removable drives, as well as partitions on these, are
represented in NT using the same device name format:
\Device\HarddiskM\PartitionN ,
with an increasing disk number M. Using this number for building the
corresponding firmware-specific ARC multi(x)disk(y)rdisk(z) path used
by the NT/ROS loader (FreeLdr, ...) is then prone to error since there
may have been removable drives inserted and accounted for in the
calculation of the disk number. These drives must be correctly
subtracted in order to generate the correct ARC path, valid once all
the removable drives have been ejected (which should also be the
situation seen from the BIOS when booting up, except of course if you
boot on a USB stick).
This problem is now solved. Note that it matters only for the disks
that have also been enumerated by the firmware (BIOS; Int 13h). We
don't have to care about the other drives, since the ARC path will be
of a different format and will not use the disk number (instead, the
SCSI coordinates are used).
We also try to enumerate all the disks found in all the possible disk
adapters and controllers enumerated in the Hardware registry tree
(and that are visible by FreeLdr) in order to cover all.
Finally, we detect whether a disk reports as a "super-floppy", i.e.
an unpartitioned disk with a valid VBR. This is indeed how a standard
floppy disk looks like, or how USB sticks are partitioned on Windows.
Such disk is reported has having only one single partition starting at
the beginning of the disk, with partition number == 0, its type being
FAT16 non-bootable.
This allows us to forbid creating any new partitions on such disks.
Note that accessing either \Device\HarddiskN\Partition0 or Partition1
on such a disk returns the same data.
Note also that on the contrary, regular MBR-partitioned disks would
report at least four partitions entries, instead of just one.
The other improvements are:
- Do *NOT* write any MBR on a disk partitioned as "super-floppy".
CORE-13703
- Fix the computed disk identifier, of format: %08x-%08x-%c .
The numbers are respectively the checksum of the first sector, and
the disk signature. The terminating letter is A or X, depending
whether the first sector ends with 0x55AA/0xAA55 or not (see also
commit 5053f1f5).
- Warn if the user attempts to install ReactOS on a disk that is not
visible by the firmware of his computer, because it may not be
bootable.
- Add also some validation ASSERTs and simplify the code here and there.
- The installation partition is called "InstallPartition", while the
global "CurrentPartition" is the disk region currently selected in
the partition UI list, on which prtitioning operations are effectued.
- Extend CheckActiveSystemPartition() to use an optional alternative
disk or partition in case the actual system partition (present in the
first disk) cannot be used, e.g. because we don't support writes on it.
- Make some partitioning functions not dependent on the selected "CurrentPartition".
- Add some sanity checks.
- Improve some of the "is-partitioned" checks.
Similarly to FMIFS this structure should be private. Instead file-system
names are passed to the helper functions, allowing to use the names
returned by the FS drivers. The names are then internally mapped to the
corresponding FS providers.
In particular this allows to handle the "RAW" file-system and to assign
the 'Unformatted' flag to partitions having this FS.
Finally this helps us refining the checks performed to see whether the
current "active" system partition uses a supported file-system.
- Add checks for GPT disks and either fail or ignore the disk,
depending on the operation being executed.
[USETUP][REACTOS] Display the disk style more accurately.
CORE-7749
- Correctly insert discovered partitions in sorted order of StartSector,
and verify that they do not overlap (-> check for broken partitioning).
May help for CORE-10898.
- Use the correct reported partition numbers that may be modified after
partitioning changes, and that need to be used when opening
\Device\Harddisk'M'\Partition'N' files. This is achieving by
retrieving the returned value of the IOCTL_DISK_SET_DRIVE_LAYOUT call.
Distinguish them from the "on-disk" partition numbers that are the ones
that enumerate the partition in partition-table order (and is the order
known by e.g. the BIOS), and that should be used to construct the
destination ARC path.
May help for CORE-4870, CORE-13205.
- Simplify a lot of duplicated code by using helper functions.
Always perform the partition validity checks when creating new
primary/extended/logical partitions, and also when a new partition
is automatically created when unpartitioned space is selected for
ReactOS installation.
CORE-12246
This will allow compatibility with modern OSes and
modern disk management utilities.
It will also improve performances by properly aligning
partition start.
And it will let enough room at the begin of the disk
for 3rd party bootloaders.
WARNING: this is not compatible with previous partition
model, and old one will likely not be compatible. You'll
have to erase your whole partition table and start from
scratch.
- SETUPLIB and USETUP: Convert PARTENTRY::DriveLetter to WCHAR.
- SETUPLIB: Retrieve volume label.
- SETUPLIB and USETUP: Move the partition types (IDs) table from
USETUP to SETUPLIB so that they can share it with the 1st-stage
GUI installer too. Also take the opportunity to update the table
with information from http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
and cross-checked with the list from Paragon Hard-Disk Manager.
- USETUP: Simplify PrintPartitionData().
- Add some code comments.
- Use OBJ_CASE_INSENSITIVE when initializing object attributes
(no actual reason why to keep case sensitivity there).
- Check the success of a RtlStringCchPrintfW call in EnumerateReactOSEntries().
- Explicitly check for returned STATUS_NOT_SUPPORTED from ChkdskPartition()
or FormatPartition(), and display an appropriate error message.
- Remove some left-over comments but also explain why I kept some
commented code (mainly for future reference).
