* Improve reactos.cab creation a bit: create it using a custom command instead of a custom target.. marking it as output this way ensures a proper cleanup with make clean and co.
svn path=/trunk/; revision=51987
- Get screen saver running. Need more work on WinLogon register issues and problems.
- Miscellaneous changes and cleanups.
svn path=/trunk/; revision=51971
- Load other driver sections from txtsetup.sif
- Enable a debug print
[TXTSETUP]
- Add PnP entries for storage devices
[PCIIDE/PCIIDEX]
- Add to bootcd
- Both usetup's PnP manager and the user-mode PnP manager now recognize PCI IDE channels
svn path=/trunk/; revision=51969
- PCIIDE should be installed for each PCI IDE controller and UNIATA should be installed for each IDE channel
- Remove an extra comma in the compatible adapters entries
svn path=/trunk/; revision=51968
- Don't report raw device support to allow the IDE channel driver (uniata) to take over control of the enumerated devices
- Ideally the PnP manager should deal with a driver collision like this but it doesn't currently
svn path=/trunk/; revision=51967
- Add a special case in IopLoadServiceModule for 1st stage setup when we have no service entries so we can still load drivers
- Fixes an old regression with 1st stage PnP which now can load drivers again
svn path=/trunk/; revision=51966
- Determine whether the device is really installed by reading the ClassGUID key instead of looking at the device flags
- Add a debug print for device installation (shouldn't be too spammy except and will be helpful for hotplugging)
[USETUP]
- Reenable the 1st stage PnP manager
svn path=/trunk/; revision=51963
- Implement a simple property sheet provider for serial ports. The property sheet does not show yet because the dialog resource is not found because a call to FindResourceW fails.
svn path=/trunk/; revision=51960
- SetupDiGetClassDevPropertySheetsW: Improve the way property sheet pages are added to a property sheet. This change enables us to retrieve the number of property sheet pages provided by a property sheet provider without leaking property sheets.
svn path=/trunk/; revision=51959
- Implement function to retrieve isochronous head endpoint descriptor
- Implement function to retrieve current frame number
- Set isochronous descriptor flag for head endpoint
- Implement retrieve device status for devices
- Implement retrieve class status from device
- Partly implement isochronous descriptor handling in usb queue
- Start implementing isochronous transfers in ISUBRequest
- Code currently not tested as the Virtual Machine with XP + ReactOS usbohci driver brings down the host system when starting the iso transfers. Ironically it crashes in MS usbohci driver
svn path=/branches/usb-bringup/; revision=51957
- Disable the 1st stage user-mode PnP manager because it is creating incomplete registry keys which is confusing the real user-mode PnP manager and preventing devices installed in 1st stage from appearing in device manager
- Fixes displaying PCI bus controllers in device manager
- I need to discuss with Herve what should be done with this code
svn path=/trunk/; revision=51947
- Try to read the PortName registry value and get the port number from the name.
- Determine the port number for parallel ports the same way we determine the port number for serial ports, except for the use of the com port database.
svn path=/trunk/; revision=51935
- Add Start Menu shell32 class to registry so LiveCD has it. It's needed for explorer-new.
[FREELDR]
- Fix rbuild file
svn path=/trunk/; revision=51931
- Implement the kernel side of surprise device removal including sending the appropriate IRPs and notifying the user-mode PnP manager
- Fix the completely broken GUID_DEVICE_ARRIVAL notification (we were sending it for the parent not the children and we were sending regardless of whether any device had actually arrived)
svn path=/trunk/; revision=51930
- Inform the PnP manager that we don't support stopping devices by failing the IRP_MN_QUERY_STOP_DEVICE IRP instead of the IRP_MN_STOP_DEVICE IRP (which is not allowed)
svn path=/trunk/; revision=51928
- Fix handling of some PnP IRPs
- Handle IRP_MN_STOP_DEVICE as it travels down the stack not up
- Only complete the IRP_MN_QUERY_XXX_DEVICE IRPs if we fail them otherwise pass them down the device stack
- Handle IRP_MN_CANCEL_XXX_DEVICE as it travels back up the stack not on its way down
- Append our flags when handling IRP_MN_QUERY_PNP_DEVICE_STATE and pass it down the device stack
svn path=/trunk/; revision=51927
- Set up periodic threshold (90 %)
- Add function to retrieve interrupt endpoints
- Add function to retrieve specific descriptors from interface. These are used by HID devices such as mice / keyboards
- Add function to retrieve interrupt interval
- Enqueue all endpoint descriptors at the end of the associated queue
- Only notify hardware of insertion when it is an bulk / control request
- Scan interrupt endpoint list to find the completed transfer descriptor
- Add debugging function to print out linked endpoint descriptors
- Interrupt transfers are now implemented.
- Tested in Windows XP SP3 + Vbox 4.04 + Microsoft 5-Button Mouse. The HID mouse installs, initializes and starts up. Unfortunately the mouse does not work as expected yet
svn path=/branches/usb-bringup/; revision=51922
- Remove dead code
- Silence traces
- Pass status & DoneHead as parameters to dpc routine
- Move IUSBRequest cleanup code into new function and use it for bulk / control transfer cleanup
- Fix bugs in AllocateEndpointDescriptor. It did not take the device address into account. It also did not respect the direction of the descriptor
- Implement support for bulk transfer requests
- Handle irp completion in CompletionCallback
- Tested in Windows XP SP3 + Vbox 4.04 + USB2.0 disabled + ReactOS usbstor + USB mass storage device
- OHCI Mass storage support is now also ready
- Next interrupt transfers
svn path=/branches/usb-bringup/; revision=51917
Store the PortName value in the registry.
Please note that SetupDiCreateDevRegKey and SetupDiOpenDevRegKey are broken because they do not open or create the 'Device Parameters' subkey of a device instance key but the device instance key itself.
svn path=/trunk/; revision=51916
- Start to put together the logon / logoff user interface process
- It currently paints an exact pixel replica of WinXP's welcome screen in a logging off state
- Just a bit of fun at the moment, but will be part of the UI revamp we're all working towards.
svn path=/trunk/; revision=51906
- Implement ComDBClaimNextFreePort and ComDBReleasePort.
- Add stubs for ComDBGetCurrentPortUsage and ComDBResizeDatabase.
- Do not keep the port bitmap in a buffer between calls but use a read-modify-write strategy instead.
- Replace pointer-based access to the port bitmap by index-based access.
- Use ComDBClaimNextFreePort in the serial port installer.
See issue #6272 for more details.
svn path=/trunk/; revision=51901
- Add glue code for supporting iso transfers
- Remove dead from Handle
- Remove broken asserts
- Add support for string descriptors
- Add support for class specific endpoint requests (Needs be ported to usbehci)
- Link to usbd driver
- Add support for retrieving string descriptor
- Rewrite configuration descriptor handling in IUSBDevice. New code is smaller, smarter and handles a lot more cases. Needs to be ported to usbehci
- Wrap usbdlib.h include in extern c macro, it has c linkage
- Control transfers should now work
- Need to implement support for isochronous / bulk / interrupt transfers until functional
- Tested with Bluetooth USB Stick (multi function, interrupt / bulk / control / isochronous) / USB Microphone (isochronous & control) in XP SP3
svn path=/branches/usb-bringup/; revision=51900
- Fix remove locks with debug block initialization in IoInitializeRemoveLockEx(). Before only their debug block was initialized, and not the lock itself...
- Implemented support remove locks debug blocks in IoAcquireRemoveLockEx(), IoReleaseRemoveLockEx() and IoReleaseRemoveLockAndWaitEx()
This will help debugging in storage stack and is required since partmgr is using them.
svn path=/trunk/; revision=51898
