Add redirections for KdSave/KdRestore and KdD0Transition/KdD3Transition.
Both KDBG and KD(TERM) need those since they will become external
transport DLLs later.
Split KdSendPacket and KdReceivePacket into those that manipulate the
KDBG state proper (reside in kdbg/kdbg.c), and those that deal only with
debug input/output that will reside in a KDTERM "KD Terminal Driver" DLL.
Based on some previous preparatory work by Hervé Poussineau in PR #4600.
(Equivalents of commits 5162bf106 and partly e9bcf7275.)
As it turns out, those three functions were duplicating the same code
between each other. Reimplement these in terms of a common helper,
RtlFindExportedRoutineByName().
Indeed: MiFindExportedRoutineByName() was just MiLocateExportName()
but taking a PANSI_STRING instead of a NULL-terminated string.
A similar state of affairs also existed in Windows <= 2003, and the
MS guys also noticed it. Both routines have been then merged and renamed
to MiFindExportedRoutineByName() on Windows 8 (taking a PCSTR instead),
and finally renamed and exported as RtlFindExportedRoutineByName()
on Windows 10.
OBJECT_TYPE_LIST_INTERNAL will serve as an internal kernel data structure
to hold validated object type contents that are copied from UM.
The difference between the public and the internal one is that the internal structure has
an additional member for access check rights that have been granted on each
object element in the list.
KiGetFeatureBits() is now being called in the early boot phase 0
when the Kernel Debugger is not yet initialized, so debug prints
are not available here. Move the debug prints into a new function
and call it at the right time. CORE-18023
The root device object is in fact a PDO and a FDO at the same time. Thus
there is no need in creating two device objects here, one is enough.
This commit also removes the explicit device extension for the root DO,
because the only reason it existed is to distinguish the root driver's
FDO from its PDOs. This can easily be done by comparing with
IopRootDeviceNode.
Also collect some unused garbage while we are here.
- Fix whitespace; add SAL annotations, doxygen documentation...
- Deduplicate the array of description strings corresponding to
IO_QUERY_DEVICE_DATA_FORMAT.
- Unhardcode the "[3]" into 'IoQueryDeviceMaxData': the maximum number
of device data queried.
CORE-17470
+ KdpDebugLogInit: Add resources cleanup in failure code paths.
Fix, in an NT-compatible manner, how (and when) the KD/KDBG BootPhase >=2
initialization steps are performed.
These are necessary for any functionality KDBG needs, that would depend
on the NT I/O Manager and the storage and filesystem stacks to be running.
This includes, creating the debug log file, and for KDBG, loading its
KDBinit initialization file.
As a result, file debug logging is fixed.
The old ReactOS-specific (NT-incompatible) callback we did in the middle
of IoInitSystem() is removed, in favor of a runtime mechanism that should
work on Windows as well.
The idea for this new mechanism is loosely inspired by the TDL4 rootkit,
see http://blog.w4kfu.com/public/tdl4_article/draft_tdl4article.html
but contrary to it, a specific hook is used instead, as well as the
technique of driver reinitialization:
https://web.archive.org/web/20211021050515/https://driverentry.com.br/en/blog/?p=261
Its rationale is as follows:
We want to be able to perform I/O-related initialization (starting a
logger thread for file log debugging, loading KDBinit file for KDBG,
etc.). A good place for this would be as early as possible, once the
I/O Manager has started the storage and the boot filesystem drivers.
Here is an overview of the initialization steps of the NT Kernel and
Executive:
----
KiSystemStartup(KeLoaderBlock)
if (Cpu == 0) KdInitSystem(0, KeLoaderBlock);
KiSwitchToBootStack() -> KiSystemStartupBootStack()
-> KiInitializeKernel() -> ExpInitializeExecutive(Cpu, KeLoaderBlock)
(NOTE: Any unexpected debugger break will call KdInitSystem(0, NULL); )
KdInitSystem(0, LoaderBlock) -> KdDebuggerInitialize0(LoaderBlock);
ExpInitializeExecutive(Cpu == 0): ExpInitializationPhase = 0;
HalInitSystem(0, KeLoaderBlock); <-- Sets HalInitPnpDriver callback.
...
PsInitSystem(LoaderBlock)
PsCreateSystemThread(Phase1Initialization)
Phase1Initialization(Discard): ExpInitializationPhase = 1;
HalInitSystem(1, KeLoaderBlock);
...
Early initialization of Ob, Ex, Ke.
KdInitSystem(1, KeLoaderBlock);
...
KdDebuggerInitialize1(LoaderBlock);
...
IoInitSystem(LoaderBlock);
...
----
As we can see, KdDebuggerInitialize1() is the last KD initialization
routine the kernel calls, and is called *before* the I/O Manager starts.
Thus, direct Nt/ZwCreateFile ... calls done there would fail. Also,
we want to do the I/O initialization as soon as possible. There does
not seem to be any exported way to be notified about the I/O manager
initialization steps... that is, unless we somehow become a driver and
insert ourselves in the flow!
Since we are not a regular driver, we need to invoke IoCreateDriver()
to create one. However, remember that we are currently running *before*
IoInitSystem(), the I/O subsystem is not initialized yet. Due to this,
calling IoCreateDriver(), much like any other IO functions, would lead
to a crash, because it calls
ObCreateObject(..., IoDriverObjectType, ...), and IoDriverObjectType
is non-initialized yet (it's NULL).
The chosen solution is to hook a "known" exported callback: namely, the
HalInitPnpDriver() callback (it initializes the "HAL Root Bus Driver").
It is set very early on by the HAL via the HalInitSystem(0, ...) call,
and is called early on by IoInitSystem() before any driver is loaded,
but after the I/O Manager has been minimally set up so that new drivers
can be created.
When the hook: KdpInitDriver() is called, we create our driver with
IoCreateDriver(), specifying its entrypoint KdpDriverEntry(), then
restore and call the original HalInitPnpDriver() callback.
Another possible unexplored alternative, could be to insert ourselves
in the KeLoaderBlock->LoadOrderListHead boot modules list, or in the
KeLoaderBlock->BootDriverListHead boot-driver list. (Note that while
we may be able to do this, because boot-drivers are resident in memory,
much like we are, we cannot insert ourselves in the system-driver list
however, since those drivers are expected to come from PE image files.)
Once the KdpDriverEntry() driver entrypoint is called, we register
KdpDriverReinit() for re-initialization with the I/O Manager, in order
to provide more initialization points. KdpDriverReinit() calls the KD
providers at BootPhase >= 2, and schedules further reinitializations
(at most 3 more) if any of the providers request so.
CORE-10749
The dmesg command is now available even if screen output is disabled.
Co-authored-by: Hermès Bélusca-Maïto <hermes.belusca-maito@reactos.org>
- KdbSymInit() in kdb_symbols.c only initializes symbols implementation
support.
- The rest of KdbInitialize gets moved into kdb_cli.c and initializes
the KDBG debugger itself.
- Move KdbDebugPrint to kdb_cli.c as well.
Access check is an expensive operation, that is, whenever an access to an
object is performed an access check has to be done to ensure the access
can be allowed to the calling thread who attempts to access such object.
Currently SepAnalyzeAcesFromDacl allocates a block of pool memory for
access check rights, nagging the Memory Manager like a desperate naughty
creep. So instead initialize the access rights as a simple variable in
SepAccessCheck and pass it out as an address to SepAnalyzeAcesFromDacl so
that the function will fill it up with access rights. This helps with
performance, avoiding wasting a few bits of memory just to hold these
access rights.
In addition to that, add a few asserts and fix the copyright header on
both se.h and accesschk.c, to reflect the Coding Style rules.
See this command's documentation:
https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/-dbgprint
and the section "DbgPrint buffer and the debugger"
https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/reading-and-filtering-debugging-messages#dbgprint-buffer-and-the-debugger
for more details.
- Loosely implement the function, based on our existing circular printout
buffers in kdio.c.
- Enable its usage in the KdpPrint() and KdpPrompt() functions.
Notice that this function will *only* capture the strings being sent **to**
the debugger, and not the strings the debugger itself produce. (This means
that we cannot use the KdPrintCircularBuffer as a replacement for our
KDBG dmesg one, for example...)
How to test:
Run ReactOS under WinDbg, and use the !dbgprint command to view the
buffer. You can also use the Memory Window, place yourself at the
address pointed by KdPrintCircularBuffer and KdPrintWritePointer, and
read its contents.
What you should observe:
Prior notice: The circular buffer in debug builds of ReactOS and Windows
is 0x8000 bytes large. In release builds, its size is down to 0x1000.
1- When you start e.g. the 2nd-stage GUI installation of ReactOS, going
past the initial "devices installation" and letting it stabilize on
the Welcome page, break into WinDbg and run the !dbgprint command. You
should notice that the end of its output is weirdly truncated, compared
to what has been actually emitted to the debug output. Comparing this
with the actual contents of the circular buffer (via Memory Window),
shows that the buffer contents is actually correct.
2- Copy all the text that has been output by the !dbgprint command and
paste it in an editor; count the number of all characters appearing +
newlines (only CR or LF), and observe that this number is "mysteriously"
equal to 16384 == 0x4000.
3- Continue running ReactOS installation for a little while, breaking back
back into WinDbg and looking at !dbgprint again. Its output seems to be
still stopping at the same place as before (but the actual buffer memory
contents shows otherwise). Continue running ROS installation, and break
into the debugger when ROS is about to restart. You should now observe
that the dbgprint buffer rolled over:
dd nt!KdPrintRolloverCount shows 1.
Carefully analysing the output of !dbgprint, however, you will notice
that it looks a bit garbage-y: the first part of the output is actually
truncated after 16384 characters, then you get a second part of the
buffer showing what ReactOS was printing while shutting down. Then
you get again what was shown at the top of the !dbgprint output.
(Of course, comparing with the actual contents of the circular buffer
in memory shows that its contents are fine...)
The reason of these strange observations, is because there is an intrinsic
bug in the !dbgprint command implementation (in kdexts.dll). Essentially,
it displays the contents of the circular buffer in two single dprintf()
calls: one for the "older" (bottom) part of the buffer:
[WritePointer, EndOfBuffer]
and one for the "newer" (upper) part of the buffer:
[CircularBuffer, WritePointer[ .
The first aspect of the bug (causing observation 3), is that those two
parts are not necessarily NULL-terminated strings (especially after
rollover), so for example, displaying the upper part of the buffer, will
potentially also display part of the buffer's bottom part.
The second aspect of the bug (explaining observations 1 and 2), is due
to the implementation of the dprintf() function (callback in dbgenv.dll).
There, it uses a fixed-sized buffer of size 0x4000 == 16384 characters.
Since the output of the circular buffer is not done by little chunks,
but by the two large parts, if any of those are larger than 0x4000 they
get truncated on display.
(This last observation is confirmed in a completely different context by
https://community.osr.com/discussion/112439/dprintf-s-max-string-length .)
- Remove KdbInit() macro and directly use KdbpCliInit() (since the place
where it was used was already within an #ifdef KDBG block).
- Declare KdpKdbgInit() only when KDBG is defined, move its definition
into kdio.c and remove the legacy wrappers/kdbg.c file.
And in KdbInitialize(), set KdpInitRoutine directly to the former,
instead of using the KdpKdbgInit indirection.
- Don't reset KdComPortInUse in KdpDebugLogInit().
- Minor refactorings: KdpSerialDebugPrint -> KdpSerialPrint and make it
static; argument name "Message" -> "String", "StringLength" -> "Length".
debug.c will serve as a centralized facility for security debugging routines and everything related to that. This file will be expanded with further debug functions for the Security subsystem if needed.
On current master, ReactOS faces these problems:
- ObCreateObject charges both paged and non paged pool a size of TOKEN structure, not the actual dynamic contents of WHAT IS inside a token. For paged pool charge the size is that of the dynamic area (primary group + default DACL if any). This is basically what DynamicCharged is for.
For the non paged pool charge, the actual charge is that of TOKEN structure upon creation. On duplication and filtering however, the paged pool charge size is that of the inherited dynamic charged space from an existing token whereas the non paged pool size is that of the calculated token body
length for the new duplicated/filtered token. On current master, we're literally cheating the kernel by charging the wrong amount of quota not taking into account the dynamic contents which they come from UM.
- Both DynamicCharged and DynamicAvailable are not fully handled (DynamicAvailable is pretty much poorly handled with some cases still to be taking into account). DynamicCharged is barely handled, like at all.
- As a result of these two points above, NtSetInformationToken doesn't check when the caller wants to set up a new default token DACL or primary group if the newly DACL or the said group exceeds the dynamic charged boundary. So what happens is that I'm going to act like a smug bastard fat politician and whack
the primary group and DACL of an token however I want to, because why in the hell not? In reality no, the kernel has to punish whoever attempts to do that, although we currently don't.
- The dynamic area (aka DynamicPart) only picks up the default DACL but not the primary group as well. Generally the dynamic part is composed of primary group and default DACL, if provided.
In addition to that, we aren't returning the dynamic charged and available area in token statistics. SepComputeAvailableDynamicSpace helper is here to accommodate that. Apparently Windows is calculating the dynamic available area rather than just querying the DynamicAvailable field directly from the token.
My theory regarding this is like the following: on Windows both TokenDefaultDacl and TokenPrimaryGroup classes are barely used by the system components during startup (LSASS provides both a DACL and primary group when calling NtCreateToken anyway). In fact DynamicAvailable is 0 during token creation, duplication and filtering when inspecting a token with WinDBG. So
if an application wants to query token statistics that application will face a dynamic available space of 0.
NtQueryInformationToken is by far the only system call in NT where ReturnLength simply cannot be optional. On Windows this parameter is always probed and an argument to NULL directly leads to an access violation exception.
This is due to the fact of how tokens work, as its information contents (token user, owner, primary group, et al) are dynamic and can vary throughout over time in memory.
What happens on current ReactOS master however is that ReturnLength is only probed if the parameter is not NULL. On a NULL case scenario the probing checks succeed and NtQueryInformationToken fails later. For this, just get rid of CompleteProbing
parameter and opt in for a bit mask flag based approach, with ICIF_FORCE_RETURN_LENGTH_PROBE being set on DefaultQueryInfoBufferCheck which NtQueryInformationToken calls it to do sanity checks.
In addition to that...
- Document the ICIF probe helpers
- Annotate the ICIF prope helpers with SAL
- With the riddance of CompleteProbing and adoption of flags based approach, add ICIF_PROBE_READ_WRITE and ICIF_PROBE_READ flags alongside with ICIF_FORCE_RETURN_LENGTH_PROBE
The current state of Security manager's code is kind of a mess. Mainly, there's code scattered around places where they shouldn't belong and token implementation (token.c) is already of a bloat in itself as it is. The file has over 6k lines and it's subject to grow exponentially with improvements, features, whatever that is.
With that being said, the token implementation code in the kernel will be split accordingly and rest of the code moved to appropriate places. The new layout will look as follows (excluding the already existing files):
- client.c (Client security implementation code)
- objtype.c (Object type list implementation code -- more code related to object types will be put here when I'm going to implement object type access checks in the future)
- subject.c (Subject security context support)
The token implementation in the kernel will be split in 4 distinct files as shown:
- token.c (Base token support routines)
- tokenlif.c (Life management of a token object -- that is Duplication, Creation and Filtering)
- tokencls.c (Token Query/Set Information Classes support)
- tokenadj.c (Token privileges/groups adjusting support)
In addition to that, tidy up the internal header and reorganize it as well.
This is needed to store FPU state information when saving or restoring the floating point state of a system due to a call to KeSaveFloatingPointState or KeRestoreFloatingPointState.
