Helvetica must be font substitute to Arial font.
- Change some Helvetica substitutes to "Arial" from "Liberation Sans". Not all Helvetica. Some languages are lacking support.
Add "Lucida Console" fonts. CORE-16264
- Add "Lucida Console" font by duplicating "DejaVu Sans Mono" font and renaming it.
- Delete some "Lucida Console" font substitutes.
- Add LICENSE file.
I used FontForge to rename it. Its family name is "Lucida Console". Its display name is "Lucida Console". Its font filename is lucon.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Trebuchet MS" fonts. CORE-16272
- Add "Trebuchet MS", "Trebuchet MS Bold", "Trebuchet MS Bold Italic" and "Trebuchet MS Italic" fonts by duplicating "Open Sans" fonts and renaming them.
- Delete some "Trebuchet MS" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Trebuchet MS". Their display names are "Trebuchet MS", "Trebuchet MS Bold", "Trebuchet MS Bold Italic" and "Trebuchet MS Italic". Their font filenames are trebuc.ttf, trebucbd.ttf, trebucbi.ttf and trebucit.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Times New Roman" fonts. CORE-16272
- Add "Times New Roman" and "Times New Roman Italic" fonts by duplicating "Liberation Serif" fonts and renaming them.
- Delete some "Times New Roman" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Times New Roman". Their display names are "Times New Roman", "Times New Roman Bold", "Times New Roman Bold Italic" and "Times New Roman Italic". Their font filenames are times.ttf, timesbd.ttf, timesbi.ttf and timesi.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Franklin Gothic Medium" fonts. CORE-16272
- Add "Franklin Gothic Medium" and "Franklin Gothic Medium Italic" fonts by duplicating Alexei Vanyashin's "Libre Franklin" fonts and renaming them.
- Delete some "Franklin Gothic Medium" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Franklin Gothic Medium". Their display names are "Franklin Gothic Medium" and "Franklin Gothic Medium Italic". Their font filenames are framd.ttf and framdit.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Alexei Vanyashin's "Libre Franklin" fonts are available at https://github.com/alexeiva/Libre-Franklin .
Add "Palatino Linotype" fonts. CORE-16272
- Add "Palatino Linotype", "Palatino Linotype Bold", "Palatino Linotype Bold Italic" and "Palatino Linotype Italic" fonts by duplicating "DejaVu Serif" fonts and renaming them.
- Delete some "Palatino Linotype" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Palatino Linotype". Their display names are "Palatino Linotype", "Palatino Linotype Bold", "Palatino Linotype Bold Italic" and "Palatino Linotype Italic". Their font filenames are pala.ttf, palab.ttf, palabi.ttf and palai.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Geogia" fonts. CORE-16272
- Add "Geogia", "Geogia Bold", "Geogia Bold Italic" and "Geogia Italic" fonts by duplicating FreeSerif fonts and renaming them.
- Delete some "Geogia" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Geogia". Their display names are "Geogia", "Geogia Bold", "Geogia Bold Italic" and "Geogia Italic". Their font filenames are georgia.ttf, georgiab.ttf, georgiaz.ttf and georgiai.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Courier New" fonts. CORE-16272
- Add "Courier New", "Courier New Bold", "Courier New Bold Italic" and "Courier New Italic" fonts by duplicating FreeMono fonts and renaming them.
- Delete some "Courier New" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Courier New". Their display names are "Courier New", "Courier New Bold", "Courier New Bold Italic" and "Courier New Italic". Their font filenames are cour.ttf, courbd.ttf, courbi.ttf and couri.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add Arial fonts. CORE-16272
- Add "Arial", "Arial Bold", "Arial Bold Italic" and "Arial Italic" fonts by duplicating Liberation Sans fonts and renaming them.
- Disable some Arial font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Arial". Their display names are "Arial", "Arial Bold", "Arial Bold Italic" and "Arial Italic". Their font filenames are arial.ttf, arialbd.ttf, arialbi.ttf and ariali.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
By removing font substitution for 'Microsoft Sans Serif'.
Thanks to the patches author Katayama Hirofumi MZ.
This is a partial revert of the guilty rev
master guilty 0.4.13-dev-9-g
811faed421
RC guilty 0.4.12-RC-13-g
8d3def0529
VBox test result:
https://reactos.org/testman/compare.php?ids=68497,68499
The same fix has been applied before to 0.4.12-RC-44-g
ca0e00e8af
Eliminate some bugs about font enumeration. CORE-15755
- Add "Microsoft Sans Serif" font substitution.
- Fix and improve the treatment of the nominal font names.
- Split IntGetFontFamilyInfo function from NtGdiGetFontFamilyInfo.
- Add DoFontSystemUnittest function for font system unittest to GDI32.
- Call DoFontSystemUnittest function at CreateFontIndirectW first call.
Nowadays more and more people try to install ReactOS from removable
drives (e.g. USB sticks) onto fixed HDDs, or try to install it into
USB sticks too.
Both fixed and removable drives, as well as partitions on these, are
represented in NT using the same device name format:
\Device\HarddiskM\PartitionN ,
with an increasing disk number M. Using this number for building the
corresponding firmware-specific ARC multi(x)disk(y)rdisk(z) path used
by the NT/ROS loader (FreeLdr, ...) is then prone to error since there
may have been removable drives inserted and accounted for in the
calculation of the disk number. These drives must be correctly
subtracted in order to generate the correct ARC path, valid once all
the removable drives have been ejected (which should also be the
situation seen from the BIOS when booting up, except of course if you
boot on a USB stick).
This problem is now solved. Note that it matters only for the disks
that have also been enumerated by the firmware (BIOS; Int 13h). We
don't have to care about the other drives, since the ARC path will be
of a different format and will not use the disk number (instead, the
SCSI coordinates are used).
We also try to enumerate all the disks found in all the possible disk
adapters and controllers enumerated in the Hardware registry tree
(and that are visible by FreeLdr) in order to cover all.
Finally, we detect whether a disk reports as a "super-floppy", i.e.
an unpartitioned disk with a valid VBR. This is indeed how a standard
floppy disk looks like, or how USB sticks are partitioned on Windows.
Such disk is reported has having only one single partition starting at
the beginning of the disk, with partition number == 0, its type being
FAT16 non-bootable.
This allows us to forbid creating any new partitions on such disks.
Note that accessing either \Device\HarddiskN\Partition0 or Partition1
on such a disk returns the same data.
Note also that on the contrary, regular MBR-partitioned disks would
report at least four partitions entries, instead of just one.
The other improvements are:
- Do *NOT* write any MBR on a disk partitioned as "super-floppy".
CORE-13703
- Fix the computed disk identifier, of format: %08x-%08x-%c .
The numbers are respectively the checksum of the first sector, and
the disk signature. The terminating letter is A or X, depending
whether the first sector ends with 0x55AA/0xAA55 or not (see also
commit 5053f1f5).
- Warn if the user attempts to install ReactOS on a disk that is not
visible by the firmware of his computer, because it may not be
bootable.
- Add also some validation ASSERTs and simplify the code here and there.
- The installation partition is called "InstallPartition", while the
global "CurrentPartition" is the disk region currently selected in
the partition UI list, on which prtitioning operations are effectued.
- Extend CheckActiveSystemPartition() to use an optional alternative
disk or partition in case the actual system partition (present in the
first disk) cannot be used, e.g. because we don't support writes on it.
- Make some partitioning functions not dependent on the selected "CurrentPartition".
- Add some sanity checks.
- Improve some of the "is-partitioned" checks.
Similarly to FMIFS this structure should be private. Instead file-system
names are passed to the helper functions, allowing to use the names
returned by the FS drivers. The names are then internally mapped to the
corresponding FS providers.
In particular this allows to handle the "RAW" file-system and to assign
the 'Unformatted' flag to partitions having this FS.
Finally this helps us refining the checks performed to see whether the
current "active" system partition uses a supported file-system.
- Within the function's body code, check the status values returned by the called functions.
- Change the BuildInstallPaths's function type to NTSTATUS instead of VOID (and check the status of InitDestinationPaths() as well.
By default, we still fallback to FAT if nothing asked, or if there
is an invalid input.
0 is FAT, 1 is BtrFS. This can be grown as soon as we add more IFS.
- Add checks for GPT disks and either fail or ignore the disk,
depending on the operation being executed.
[USETUP][REACTOS] Display the disk style more accurately.
CORE-7749
- Correctly insert discovered partitions in sorted order of StartSector,
and verify that they do not overlap (-> check for broken partitioning).
May help for CORE-10898.
- Use the correct reported partition numbers that may be modified after
partitioning changes, and that need to be used when opening
\Device\Harddisk'M'\Partition'N' files. This is achieving by
retrieving the returned value of the IOCTL_DISK_SET_DRIVE_LAYOUT call.
Distinguish them from the "on-disk" partition numbers that are the ones
that enumerate the partition in partition-table order (and is the order
known by e.g. the BIOS), and that should be used to construct the
destination ARC path.
May help for CORE-4870, CORE-13205.
- Simplify a lot of duplicated code by using helper functions.
Always perform the partition validity checks when creating new
primary/extended/logical partitions, and also when a new partition
is automatically created when unpartitioned space is selected for
ReactOS installation.
CORE-12246
This will allow compatibility with modern OSes and
modern disk management utilities.
It will also improve performances by properly aligning
partition start.
And it will let enough room at the begin of the disk
for 3rd party bootloaders.
WARNING: this is not compatible with previous partition
model, and old one will likely not be compatible. You'll
have to erase your whole partition table and start from
scratch.
- SETUPLIB and USETUP: Convert PARTENTRY::DriveLetter to WCHAR.
- SETUPLIB: Retrieve volume label.
- SETUPLIB and USETUP: Move the partition types (IDs) table from
USETUP to SETUPLIB so that they can share it with the 1st-stage
GUI installer too. Also take the opportunity to update the table
with information from http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
and cross-checked with the list from Paragon Hard-Disk Manager.
- USETUP: Simplify PrintPartitionData().
- Add some code comments.
- BOOTDATA: Use standard INF signature string, so that they can be
opened successfully using ReactOS' or Windows' setupapi.dll with
the INF_STYLE_WIN4 style.
- SETUPLIB: Use the correct INF_STYLE_* INF styles in SpInfOpenInfFile() calls.
- REACTOS : Switch thread locale to user-specified LocaleId when calling
SetupOpenInfFileW(), so that the correct localized strings are used.
- In PrepareCopyInfFile(), explicitly use AddSectionToCopyQueueCab()
to retrieve the files from the CAB INF.
Otherwise if one continued to use and rely on AddSectionToCopyQueue()
to do this job instead, bad things could happen like, re-enumerating
twice or more (and adding them to the file queue) the same files.
This is because in the new code AddSectionToCopyQueue() can be called
many times to deal with different SIF file sections. The old code then
called AddSectionToCopyQueueCab() in turn, but on the same list...
Now the steps performed are clear, and everything works as intended.
- Simplify the code that computes the full source and destination paths
for the files to be copied and directories to be created, using helper
functions.
- Compute the source file and target location from the TXTSETUP.SIF
entries in a NT-compatible manner.
- Use adequate access flag when opening symbolic links.
- Simplify the prototype of UpdateRegistry() since now both Setup INF
handle and settings lists are inside the USETUP_DATA structure.
This allows using some of the SetupApi.dll functions when SETUPLIB is
used in the (Win32) GUI 1st-stage installer "REACTOS", while using the
custom implemented NT-aware functions in "USETUP".
- Move a great deal of global variables into the USETUP_DATA structure
(the SetupInf, the SetupFileQueue, the generic lists...).
- Place the common setup initialization code into an InitializeSetup()
routine, and the cleanup code into FinishSetup().
- Implement the setup-code part support for the TXTSETUP.SIF setup
source path override variables "SetupSourceDevice" and "SetupSourcePath"
(see CORE-9023); support for them in SETUPLDR will be added later.
This includes also to remove the created symlinks.
Symlinks deletion is special, as one has to open first the symlink
itself (and not its target), then remove the "SymbolicLinkTarget" value
before really deleting the key. Of course everything must be done under
proper access rights.
Additional changes:
- Change prototype BOOLEAN CmpLinkKeyToHive(...) to NTSTATUS CreateSymLinkKey(...).
- Silence few DPRINTs.
- Document some FIXMEs that I need to inspect later on ReactOS.
- HKEY --> HANDLE.
- It can therefore be also used by the 1st-stage GUI setup.
- Rename some function parameters to clarify what they should be.
Based on:
svn path=/branches/setup_improvements/; revision=75750
[USETUP] Improve usage of ERROR_TXTSETUP_SECTION and ERROR_CABINET_SECTION error codes, correctly display associated error message, and remove a deprecated string.
- Apart from allowing a UI cache variable that may be used when
displaying GENERIC_LIST_ENTRY-ies, do not store any display strings
associated to these list entries. They should be instead computed only
when initializing a list UI (or a combo-box or list control if the
code is used in Win32 environment).
For this matter a callback is provided to InitGenericListUi() that
does the job of computing the displayed string corresponding to a
given GENERIC_LIST_ENTRY.
- Simplify the calls to InitGenericListUi(), and refactor the
RestoreGenericListUiState() function.
- Use for-loops for iterating over GENERIC_LIST items.
- Adapt the storage data format for lists of settings items.
- The txtsetup.sif INF format specified in LoadSetupInf() should not be
INF_STYLE_WIN4 (to be investigated...).
- Use OBJ_CASE_INSENSITIVE when initializing object attributes
(no actual reason why to keep case sensitivity there).
- Check the success of a RtlStringCchPrintfW call in EnumerateReactOSEntries().
- Explicitly check for returned STATUS_NOT_SUPPORTED from ChkdskPartition()
or FormatPartition(), and display an appropriate error message.
- Remove some left-over comments but also explain why I kept some
commented code (mainly for future reference).
Comment about the status of two '#if 0'.
[SETUPLIB] Fix some uninitialized variables (caught by clang-cl).
Also, initialize NtName->Length in return paths in ResolveArcNameManually().
Only convert to ANSI when needed (e.g. in the display code for usetup).
The 1st-stage GUI setup will however use the UNICODE strings directly.
svn path=/branches/setup_improvements/; revision=75753
[SETUPLIB] Copy the mui* files from usetup into the setuplib for later usage, and add mui.c to build.
svn path=/branches/setup_improvements/; revision=75711
[SETUPLIB][USETUP] Start massaging the MUI files and split up what concerns only the usetup "resources",
and what concerns general language parameters (in the setuplib).
It may be interesting to retrieve the language parameters
from INF file (e.g. intl.inf) (suggested by Giannis).
svn path=/branches/setup_improvements/; revision=75715
[SETUPLIB] Add the necessary headers to mui.c to be able to compile.
[USETUP] Comment out the languages that don't have any resources.
svn path=/branches/setup_improvements/; revision=75716
[SETUPLIB][USETUP] Adjust MUI and settings code.
- Re-enable settings code concerning language, keyboards & layout
in the setuplib, and remove the old code in usetup.
- Remove useless code in setuplib's mui.c.
- Rename usetup's MUI "LanguageList" into "ResourceList" so as to
avoid colliding with the "LanguageList" of setuplib.
- Add the magic CMakeLists line "add_definitions(${I18N_DEFS})" that
I forgot previously, that caused the "LanguageList" of setuplib to be empty!
The code compiles and works during my tests.
svn path=/branches/setup_improvements/; revision=75717
[SETUPLIB] Change some string pointer types & function prototypes so that the usetup-specific
"SelectedLanguageId" variable is not used in the library.
svn path=/branches/setup_improvements/; revision=75719
[SETUPLIB] Change some function prototypes so that the usetup-specific "SelectedLanguageId" variable is not used in the library.
Also, make AddEntriesFromInfSection(), DefaultProcessEntry() and the typedef PPROCESS_ENTRY_ROUTINE private again.
svn path=/branches/setup_improvements/; revision=75720
svn path=/branches/setup_improvements/; revision=75724
[USETUP] Code adaptations.
- Transform some do{}while() loops into while(){} ones, since the lists on which we work may only contain one single {NULL} element.
- Modify MUIGetOEMCodePage() call after r75719.
- Use PCWSTR where needed.
svn path=/branches/setup_improvements/; revision=75722
[USETUP] Adjust some MUI & settings calls, following the commits r75719, r75720 and r75721.
svn path=/branches/setup_improvements/; revision=75723
[INPUT.CPL] Adjust inclusion of "muifonts.h" (commit 3dbd44f) due to changes introduced in r75711 and r75715.
This code is moved ther since it'll be needed for 1st-stage GUI
installer as well.
The code dealing with keyboard layouts is however not moved yet,
since it uses MUI* functions from usetup.
I'll try to think how to include that in setuplib...
svn path=/branches/setup_improvements/; revision=75701
Move the bootsup.c code into the setuplib, as the code is generic
enough to be used by both USETUP and the 1st-stage GUI installer.
svn path=/branches/setup_improvements/; revision=75674
- Compute the installation source paths based on the full path of the
installer program that uses the setup library.
- Add INF_STYLE_OLDNT define in infsupp.h.
- Add some (silenced) diagnostic DPRINTs.
svn path=/branches/setup_improvements/; revision=75667
- Use correct inf style flags in SetupOpenInfFileEx() calls when opening
txtsetup.sif and unattend.inf. Technically txtsetup.sif would be
INF_STYLE_WIN4, but since we use "$ReactOS$" as its version signature,
it would not work when opening it with setupapi.dll functions.
Hence this flag is combined with INF_STYLE_OLDNT too.
- Don't fail if opening the \SystemRoot symbolic link doesn't work
(usually due to incorrect access rights); in that case, just use the
installer image file path as the installation source path.
svn path=/branches/setup_improvements/; revision=75676
And turn the previous two functions into macros.
svn path=/branches/setup_improvements/; revision=75635
svn path=/branches/setup_improvements/; revision=75652
Used in exiting code and in later code in this file.
svn path=/branches/setup_improvements/; revision=75632
svn path=/branches/setup_improvements/; revision=75652
- Move several global setup variables into a structure "USETUP_DATA",
similar to the syssetup structure "SETUPDATA" (or the WIP 1st-stage
installer structure of the same name), so that these variables can be
set easily by different helper setup functions;
- Move CheckUnattendedSetup() and GetSourcePaths() to setuplib and make
CheckUnattendedSetup() use the USETUP_DATA structure;
- Add a LoadSetupInf() function that loads the txtsetup.sif file
(factoring out the corresponding code in USETUP);
- Add a InstallSetupInfFile() function (that I'll probably rename later on)
whose purpose is to create a valid "$winnt$.inf" setup installation file
in the ReactOS\system32 directory, which should help the 2nd-stage installer
to correctly retrieve the source installation media we used during 1st-stage,
and contain the unattended setup lines copied from unattend.inf. This is
done in a Windows-compatible way.
svn path=/branches/setup_improvements/; revision=75518
[USETUP] Close the txtsetup.sif file at the end of the operations.
svn path=/branches/setup_improvements/; revision=75539
Remove the commented-out IsValidPath() in that file, and remove
as well the temporary prototypes in regutil.c .
svn path=/branches/setup_improvements/; revision=75249
Split the registry helper code into registry utility functions
(create/mount/unmount/verify hives) and registry creation code
(the rest: initializing the system hives) and move it in the
setup library.
svn path=/branches/setup_improvements/; revision=75247
[USETUP][SETUPLIB] Improve how the Setup* INF APIs are interfaced in the code.
Define prototypes compatible (including their calling convention)
with the ones defined by setupapi (.h/.dll) so that it can be possible
to either use an internal implementation of these functions (via the
INFLIB library) as currently being done, or using imported setupapi
functions, as would be done by the future 1st-stage GUI installer.
[SETUPLIB] Cleanup the registry.c file and use the infsupp.h header.
svn path=/branches/setup_improvements/; revision=75345
svn path=/branches/setup_improvements/; revision=75346
[USETUP][SETUPLIB] Move some INF-related code from usetup to the setuplib.
- Move the generic INF_GetDataField() and INF_GetData() helpers to
setuplib, and rework them a bit so that they explicitly call setupapi
functions (or implementations thereof when being used in usetup);
- Rework the headers in accordance;
- Fix compilation in lib/registry.c .
- Fix compilation when these headers are used withing usetup (who
doesn't use setupapi.dll) and "reactos" (the 1st-stage GUI installer
that uses setupapi.dll).
svn path=/branches/setup_improvements/; revision=75515
svn path=/branches/setup_improvements/; revision=75537
svn path=/branches/setup_improvements/; revision=75538
- Fix the usage of the BootEntry's "Version" member.
- Don't surround with too many quotation marks the "friendly" boot entry name in AddBootStoreEntry().
svn path=/branches/setup_improvements/; revision=74964
This concerns so far, only freeldr.ini and to an extent, boot.ini, but planning in the future to add support for registry-oriented BCD
as well as possibly direct (u)EFI entries, using the corresponding NT functions.
This code is so far only used in osdetect.c, but will be soon used by usetup's bootsup.c (note that some helper functions: CreateCommonFreeLdrSections()
and (Un)protectBootIni() are already taken from it and used in bldrsup.c).
- In EnumerateNTOSBootEntries(), continue enumerating the boot entries until the user callback returns an status code that is not successful.
- Remove some old code from osdetect.c; use directly BootEntry->FriendlyName when building the display names of the available installations, since now
BootEntry->FriendlyName is a PCWSTR (and not a UNICODE_STRING anymore).
svn path=/branches/setup_improvements/; revision=74943
[SETUPLIB] Make the NTOS_BOOT_ENTRY structure more generic, so that it can wrap around either actual NTOS boot entry options, or FreeLdr-like boot-sector options.
In a sense, the NTOS_BOOT_ENTRY structure now looks much more like the NT structure "BOOT_ENTRY".
- Adapt the code in bldrsup.c to these modifications, and re-enable FreeLdr-like boot-sector-file support code that was commented out.
More code cleanup will follow later.
svn path=/branches/setup_improvements/; revision=74952
- Use NT string safe functions.
- Add support for other bootloaders;
- Update a couple of comments;
- Remove deprecated __REACTOS__ #ifdefs.
svn path=/branches/setup_improvements/; revision=74713
- Call OpenAndMapFile() with its new ReadWrite parameter;
- Add informative comments in osdetect.c;
- In partlist.c, check whether a disk has a valid MBR by also checking for its 0xAA55 signature.
svn path=/branches/setup_improvements/; revision=74712
- In DoesFileExist(): Call NtOpenFile with FILE_GENERIC_READ instead of the more generic GENERIC_READ access right.
- OpenAndMapFile(): Add support for opening & mapping files with write access (to be used latter).
svn path=/branches/setup_improvements/; revision=74710
- Split IniCacheLoad() and IniCacheSave() into: themselves & IniCacheLoadByHandle() and IniCacheSaveByHandle(),
respectively, so that we can load & save INI files if we already have an opened handle to them.
svn path=/branches/setup_improvements/; revision=74711
So far we only have:
- a function FindNTOSBootLoader() that detects the existence of a given boot loader;
- a function EnumerateNTOSBootEntries() (and corresponding helpers) that enumerate the different boot entries in the configuration file(s) for a given boot loader, and for each entry, calls a user-provided callback.
Only supported at the moment: ntldr and freeldr.
Doing that allows me to simplify large portions of the NT-OS detection code so that it becomes more bootloader-agnostic, and this will help me for simplifying some parts of usetup/bootsup.c too, later...
svn path=/branches/setup_improvements/; revision=74661
- Adjust also its callers, adjust OpenAndMapFile() parameters.
- Related to that, simplify IsValidNTOSInstallation() parameters & introduce a IsValidNTOSInstallation_UStr()
that does the same, but takes a UNICODE_STRING instead.
- Simplify CheckForValidPEAndVendor().
Now only exactly 5 calls use the "old" 'DoesFileExist' syntax, using a temporarily auxiliary function "DoesFileExist_2"...
svn path=/branches/setup_improvements/; revision=74641
This allows building concatenated paths with an arbitrary number of separated components.
- Use the newly-introduced CombinePaths() and ConcatPaths() functions.
- Fix also few comments, and place some UNICODE_NULLs here & there.
svn path=/branches/setup_improvements/; revision=74637
svn path=/branches/setup_improvements/; revision=74640
- filesup.c's functions ConcatPaths(), Does[Path|File]Exist(), NtPathToDiskPartComponents(), OpenAndMapFile(), UnMapFile();
- Move the inicache library to setuplib as it'll be used for the 1st stage GUI setup too (indeed, there is no good INI file API
under Win32; the Win32 profile "API" is just good enough to manipulate the win16 ini files, and are here anyways for backward
compatibility purposes only);
- Move the OS detector too.
- Remove the duplicated ConcatPaths() code in arcname.c.
svn path=/branches/setup_improvements/; revision=74634
svn path=/branches/setup_improvements/; revision=74638
- In the partlist.c disk getters: Remove useless "IsListEmpty(&List->DiskListHead)" checks, because this is actually the kind of check the while() loop does just after...
- Fix few DPRINTs.
svn path=/branches/setup_improvements/; revision=74629
- isspace('\0') returns FALSE anyways so no need to separately test for a NULL character;
- The (str/wcs)toul function cannot return a NULL pointer from its second paramter;
- VersionInfo32_FindChild(): the third argument is indeed a number of characters (not bytes),
so rename the parameter to make this fact clear. The function is however correctly used within this module.
svn path=/branches/setup_improvements/; revision=74629
The NT path resolver allows mapping between an ARC path as specified in freeldr.ini / boot.ini , to its corresponding NT path, if possible.
Currently, only the mapping direction "ARC to NT" is implemented. It will be used wherever such mappings are needed, for example when identifying
the ReactOS / Windows installations from the available freeldr.ini / boot.ini entries (for upgrading / repair purposes).
The resolver supports the usual ARC paths: multi()disk()[r|f]disk()[partition()] ; eisa()disk()[r|f]disk()[partition()] ; multi()disk()cdrom() ;
scsi()disk()[r|f]disk()[partition()] ; scsi()cdrom()fdisk() ; ramdisk(x) ; net(x) (actually reported as "unsupported" since it would map to some
path on some network), and the newly-introduced Win2k signature()disk()rdisk()[partition()].
The code is in work-in-progress status.
Some validation tests, that were used during the implementation of the resolver, have been added.
svn path=/branches/setup_improvements/; revision=74621
svn path=/branches/setup_improvements/; revision=74631
- Add a PreparePartitionForFormatting routine that sets the partition ID depending on the chosen filesystem.
- The 'FORMATMACHINESTATE FormatState' machine-state and the 'TempPartition' members of the partition list structure is purely a USETUP convenience, so remove them from the PARTLIST structure and move them back into USETUP.
- Attempt to recognize the filesystem (set the 'FileSystem' member of PARTENTRY) of partitions we are adding into the PARTLIST list.
- Fix the return value of the SelectPartition function, which is by the way completely broken (it doesn't do what it is supposed to do; alternatively its naming is completely wrong...).
svn path=/branches/setup_improvements/; revision=74572
svn path=/branches/setup_improvements/; revision=74573
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
