- update svn properties

- improve error checking
- return -2 when the test fails
- add a few test configs (required for sysregtest target)

svn path=/trunk/; revision=24751

reactos/tools/sysreg/rosboot_test.cpp

@@ -325,15 +325,21 @@ namespace Sysreg_
 		OsSupport::ProcessID pid = OsSupport::createProcess ((TCHAR*)boot_cmd.c_str (), 0, NULL); 
 
 		string::size_type pipe_pos = boot_cmd.find (_T("serial pipe:"));
-		pipe_pos += 12;
-		string::size_type pipe_pos_end = boot_cmd.find (_T(" "), pipe_pos);
-		if (pipe_pos != string::npos && pipe_pos > 0 && pipe_pos < boot_cmd.size())
+
+		if (pipe_pos != string::npos)
 		{
-			pipecmd = _T("\\\\.\\pipe\\") + boot_cmd.substr (pipe_pos, pipe_pos_end - pipe_pos);
+			pipe_pos += 12;
+			string::size_type pipe_pos_end = boot_cmd.find (_T(" "), pipe_pos);
+			if (pipe_pos != string::npos && pipe_pos > 0 && pipe_pos < boot_cmd.size())
+			{
+				pipecmd = _T("\\\\.\\pipe\\") + boot_cmd.substr (pipe_pos, pipe_pos_end - pipe_pos);
+			}
 		}
-		else
+
+		if (!pipecmd.length ())
 		{
-			return false;
+			//FIXME
+			pipecmd = _T("\\\\.\\pipe\\vmwaredebug");
 		}
 
 		if (m_Delayread)
@@ -355,27 +361,31 @@ namespace Sysreg_
 
 		bool ret = true;
 		vector<string> vect;
-
+		size_t lines = 0;
 		while(1)
 		{
 			if (isTimeout(m_Timeout))
 			{
 				break;
 			}
-
-			if (namedpipe_reader.readPipe (vect) != 0)
+			size_t line_count = namedpipe_reader.readPipe (vect);
+			if (!line_count)
 			{
-				DebugState state = checkDebugData(vect);
-				if (state == DebugStateBSODDetected || state == DebugStateUMEDetected)
-				{
-					ret = false;
-					break;
-				}
-				else if (state == DebugStateCPReached)
-				{
-					break;
-				}
+				cerr << "No data read" << endl;
+				continue;				
 			}
+
+			DebugState state = checkDebugData(vect);
+			if (state == DebugStateBSODDetected || state == DebugStateUMEDetected)
+			{
+				ret = false;
+				break;
+			}
+			else if (state == DebugStateCPReached)
+			{
+				break;
+			}
+			lines += line_count;
 		}
 		namedpipe_reader.closePipe ();
 		_sleep(3* CLOCKS_PER_SEC);

reactos/tools/sysreg/runonce.cfg

@@ -0,0 +1,117 @@
+ ; ROS_OUTPUT
+;
+; This variable sets the location where to search symbol files for modules
+; This is required when tracing usermode exceptions, bsod etc...
+;
+; If this value is not defined, sysreg looks for the environment variable
+; ROS_OUTPUT. If this is also not set, it uses the default output-i386
+
+ROS_OUTPUT=D:\reactos\output-i386
+
+; ROS_ADDR2LINE
+;
+; This value is used by the symbol resolver to convert an module address into
+; an source file + line number;
+;
+; Note: The symbol resolver appends the modulename and the module address seperated by an space
+
+ROS_ADDR2LINE=addr2line.exe --exe=
+
+;-----------------------------------------------------------------------------------------
+; RosBoot specific settings
+;
+
+;
+; ROSBOOT_CMD  
+;
+; This value is the command which is executed to gain debugging data
+; this value is mandatory
+
+ROSBOOT_CMD=D:\reactos\qemu\qemu.exe -serial pipe:qemu -boot c -m 128 -L D:\reactos\qemu\ D:\reactos\RosVM.vmdk -pidfile pid.txt
+
+;
+; ROSBOOT_PIDFILE
+;
+; This option stores the pid of the emulator process in a text file. 
+;
+
+ROSBOOT_PID_FILE=pid.txt
+
+;
+; ROSBOOT_DEBUG_PORT
+;
+; This variable controls on where to look for debugging data. If the
+; value is set to file, then sysreg will execute ROSBOOT_CMD and also
+; open the file specified in ROSBOOT_DEBUG_FILE and read the debugging info from the file
+;
+; If the value is set to pipe, then sysreg will read from pipe created by the
+; ROSBOOT_CMD
+;
+;ROSBOOT_DEBUG_PORT=file
+ROSBOOT_DEBUG_PORT=pipe
+
+;
+; ROSBOOT_DEBUG_FILE
+;
+; This value specifies the debug file. This variable must be set when using
+; ROSBOOT_DEBUG_PORT=file
+;
+; Note: when ROSBOOT_DEBUG_PORT is set to pipe, then sysreg will write all received
+; debug data to the specified debug file
+;
+
+;ROSBOOT_DEBUG_FILE=D:\ReactOS\tools\sysreg\bsdebug.log
+;ROSBOOT_DEBUG_FILE=D:\ReactOS\tools\sysreg\debug.log
+
+; ROSBOOT_DELAY_READ;
+;
+; When the emulator is started, it spends a little time loading and running through its
+; BIOS. This time delays reading from the pipe/file untill the specified value
+; 
+; the value is in seconds
+;
+; Note: if the value is not provided, then reading debug info is started immediately
+
+ROSBOOT_DELAY_READ=4
+
+
+
+; ROSBOOT_TIME_OUT
+;
+; This variable is the maximum runtime of the ROSBOOT_CMD. If the command
+; runs longer than this value, sysreg exits with success mode;
+;
+; Note: if you set the variable ROSBOOT_CHECK_POINT and the checkpoint is not reached
+; within this time, sysreg exits with failure mode
+;
+; If the variable is not set, the default timeout is 1 minute
+;
+ROSBOOT_TIME_OUT=180.0
+
+; ROSBOOT_CHECK_POINT
+;
+; RosBoot will stop executing when it finds a string in the form
+; SYSREG_CHECKPOINT:CP_NAME
+;
+; CP_NAME is the value of the ROSBOOT_CHECK_POINT variable
+
+ROSBOOT_CHECK_POINT=THIRDBOOT_COMPLETE
+
+; ROSBOOT_CRITICAL_APP
+;
+; If an user-mode exception occurs in an critical application, i.e. setup.exe / explorer.exe, sysreg will report
+; that the test has failed and quit debugging immediately
+; 
+; if an user-mode exception occurs in any other application, sysreg will report the exception but the exception
+; has no effect on the test result
+;
+; Note: if the value is set to IGNORE, sysreg will ignore all user-mode exceptions
+;
+; Note: if the variable is not set, then sysreg will stop on the first user-mode exception
+;
+; seperate each application with an space
+
+
+ROSBOOT_CRITICAL_APP=setup.exe userinit.exe smss.exe winlogon.exe csrss.exe explorer.exe
+;ROSBOOT_CRITICAL_APP=setup.exe userinit.exe smss.exe winlogon.exe csrss.exe explorer.exe lsass.exe
+

reactos/tools/sysreg/secstage.cfg

@@ -0,0 +1,118 @@
+ ; ROS_OUTPUT
+;
+; This variable sets the location where to search symbol files for modules
+; This is required when tracing usermode exceptions, bsod etc...
+;
+; If this value is not defined, sysreg looks for the environment variable
+; ROS_OUTPUT. If this is also not set, it uses the default output-i386
+
+ROS_OUTPUT=D:\reactos\output-i386
+
+; ROS_ADDR2LINE
+;
+; This value is used by the symbol resolver to convert an module address into
+; an source file + line number;
+;
+; Note: The symbol resolver appends the modulename and the module address seperated by an space
+
+ROS_ADDR2LINE=addr2line.exe --exe=
+
+;-----------------------------------------------------------------------------------------
+; RosBoot specific settings
+;
+
+;
+; ROSBOOT_CMD  
+;
+; This value is the command which is executed to gain debugging data
+; this value is mandatory
+
+ROSBOOT_CMD=D:\reactos\qemu\qemu.exe -serial pipe:qemu -boot c -m 128 -L D:\reactos\qemu\ D:\reactos\RosVM.vmdk -pidfile pid.txt
+
+;
+; ROSBOOT_PIDFILE
+;
+; This option stores the pid of the emulator process in a text file. 
+;
+
+ROSBOOT_PID_FILE=pid.txt
+
+;
+; ROSBOOT_DEBUG_PORT
+;
+; This variable controls on where to look for debugging data. If the
+; value is set to file, then sysreg will execute ROSBOOT_CMD and also
+; open the file specified in ROSBOOT_DEBUG_FILE and read the debugging info from the file
+;
+; If the value is set to pipe, then sysreg will read from pipe created by the
+; ROSBOOT_CMD
+;
+;ROSBOOT_DEBUG_PORT=file
+ROSBOOT_DEBUG_PORT=pipe
+
+;
+; ROSBOOT_DEBUG_FILE
+;
+; This value specifies the debug file. This variable must be set when using
+; ROSBOOT_DEBUG_PORT=file
+;
+; Note: when ROSBOOT_DEBUG_PORT is set to pipe, then sysreg will write all received
+; debug data to the specified debug file
+;
+
+;ROSBOOT_DEBUG_FILE=D:\ReactOS\tools\sysreg\bsdebug.log
+;ROSBOOT_DEBUG_FILE=D:\ReactOS\tools\sysreg\debug.log
+
+; ROSBOOT_DELAY_READ;
+;
+; When the emulator is started, it spends a little time loading and running through its
+; BIOS. This time delays reading from the pipe/file untill the specified value
+; 
+; the value is in seconds
+;
+; Note: if the value is not provided, then reading debug info is started immediately
+
+ROSBOOT_DELAY_READ=4
+
+
+
+; ROSBOOT_TIME_OUT
+;
+; This variable is the maximum runtime of the ROSBOOT_CMD. If the command
+; runs longer than this value, sysreg exits with success mode;
+;
+; Note: if you set the variable ROSBOOT_CHECK_POINT and the checkpoint is not reached
+; within this time, sysreg exits with failure mode
+;
+; If the variable is not set, the default timeout is 1 minute
+;
+ROSBOOT_TIME_OUT=180.0
+
+; ROSBOOT_CHECK_POINT
+;
+; RosBoot will stop executing when it finds a string in the form
+; SYSREG_CHECKPOINT:CP_NAME
+;
+; CP_NAME is the value of the ROSBOOT_CHECK_POINT variable
+
+ROSBOOT_CHECK_POINT=SYSSETUP_COMPLETE
+
+
+; ROSBOOT_CRITICAL_APP
+;
+; If an user-mode exception occurs in an critical application, i.e. setup.exe / explorer.exe, sysreg will report
+; that the test has failed and quit debugging immediately
+; 
+; if an user-mode exception occurs in any other application, sysreg will report the exception but the exception
+; has no effect on the test result
+;
+; Note: if the value is set to IGNORE, sysreg will ignore all user-mode exceptions
+;
+; Note: if the variable is not set, then sysreg will stop on the first user-mode exception
+;
+; seperate each application with an space
+
+
+ROSBOOT_CRITICAL_APP=setup.exe userinit.exe smss.exe winlogon.exe csrss.exe explorer.exe
+;ROSBOOT_CRITICAL_APP=setup.exe userinit.exe smss.exe winlogon.exe csrss.exe explorer.exe lsass.exe
+

reactos/tools/sysreg/sysreg.cpp

@@ -97,6 +97,7 @@ int _tmain(int argc, TCHAR * argv[])
 	else
 	{
 		cout << "The regression test " << regtest->getName () << " failed" << endl;
+		return -2;
 	}
 
 	return 0;

reactos/tools/sysreg/txtmode.cfg

@@ -0,0 +1,119 @@
+ ; ROS_OUTPUT
+;
+; This variable sets the location where to search symbol files for modules
+; This is required when tracing usermode exceptions, bsod etc...
+;
+; If this value is not defined, sysreg looks for the environment variable
+; ROS_OUTPUT. If this is also not set, it uses the default output-i386
+
+ROS_OUTPUT=D:\reactos\output-i386
+
+; ROS_ADDR2LINE
+;
+; This value is used by the symbol resolver to convert an module address into
+; an source file + line number;
+;
+; Note: The symbol resolver appends the modulename and the module address seperated by an space
+
+ROS_ADDR2LINE=addr2line.exe --exe=
+
+;-----------------------------------------------------------------------------------------
+; RosBoot specific settings
+;
+
+;
+; ROSBOOT_CMD  
+;
+; This value is the command which is executed to gain debugging data
+; this value is mandatory
+
+ROSBOOT_CMD=D:\reactos\qemu\qemu.exe -serial pipe:qemu -boot d -m 128 -L D:\reactos\qemu\ D:\reactos\RosVM.vmdk -cdrom D:\Reactos\ReactOS-RegTest.iso -pidfile pid.txt
+
+;
+; ROSBOOT_PIDFILE
+;
+; This option stores the pid of the emulator process in a text file. 
+;
+
+ROSBOOT_PID_FILE=pid.txt
+
+;
+; ROSBOOT_DEBUG_PORT
+;
+; This variable controls on where to look for debugging data. If the
+; value is set to file, then sysreg will execute ROSBOOT_CMD and also
+; open the file specified in ROSBOOT_DEBUG_FILE and read the debugging info from the file
+;
+; If the value is set to pipe, then sysreg will read from pipe created by the
+; ROSBOOT_CMD
+;
+;ROSBOOT_DEBUG_PORT=file
+ROSBOOT_DEBUG_PORT=pipe
+
+;
+; ROSBOOT_DEBUG_FILE
+;
+; This value specifies the debug file. This variable must be set when using
+; ROSBOOT_DEBUG_PORT=file
+;
+; Note: when ROSBOOT_DEBUG_PORT is set to pipe, then sysreg will write all received
+; debug data to the specified debug file
+;
+
+;ROSBOOT_DEBUG_FILE=D:\ReactOS\tools\sysreg\bsdebug.log
+;ROSBOOT_DEBUG_FILE=D:\ReactOS\tools\sysreg\debug.log
+
+; ROSBOOT_DELAY_READ;
+;
+; When the emulator is started, it spends a little time loading and running through its
+; BIOS. This time delays reading from the pipe/file untill the specified value
+; 
+; the value is in seconds
+;
+; Note: if the value is not provided, then reading debug info is started immediately
+
+ROSBOOT_DELAY_READ=4
+
+
+
+; ROSBOOT_TIME_OUT
+;
+; This variable is the maximum runtime of the ROSBOOT_CMD. If the command
+; runs longer than this value, sysreg exits with success mode;
+;
+; Note: if you set the variable ROSBOOT_CHECK_POINT and the checkpoint is not reached
+; within this time, sysreg exits with failure mode
+;
+; If the variable is not set, the default timeout is 1 minute
+;
+ROSBOOT_TIME_OUT=180.0
+
+; ROSBOOT_CHECK_POINT
+;
+; RosBoot will stop executing when it finds a string in the form
+; SYSREG_CHECKPOINT:CP_NAME
+;
+; CP_NAME is the value of the ROSBOOT_CHECK_POINT variable
+
+ROSBOOT_CHECK_POINT=USETUP_COMPLETE
+;ROSBOOT_CHECK_POINT=SYSSETUP_COMPLETE
+;ROSBOOT_CHECK_POINT=THIRDBOOT_COMPLETE
+
+; ROSBOOT_CRITICAL_APP
+;
+; If an user-mode exception occurs in an critical application, i.e. setup.exe / explorer.exe, sysreg will report
+; that the test has failed and quit debugging immediately
+; 
+; if an user-mode exception occurs in any other application, sysreg will report the exception but the exception
+; has no effect on the test result
+;
+; Note: if the value is set to IGNORE, sysreg will ignore all user-mode exceptions
+;
+; Note: if the variable is not set, then sysreg will stop on the first user-mode exception
+;
+; seperate each application with an space
+
+
+ROSBOOT_CRITICAL_APP=setup.exe userinit.exe smss.exe winlogon.exe csrss.exe explorer.exe
+;ROSBOOT_CRITICAL_APP=setup.exe userinit.exe smss.exe winlogon.exe csrss.exe explorer.exe lsass.exe
+