Correct problem with keyboard input not being accepted

Added kernel debugger
Kernel configuration

svn path=/trunk/; revision=1780
This commit is contained in:
David Welch 2001-04-10 17:48:17 +00:00
parent db0e348770
commit bd5d1d2adf
12 changed files with 736 additions and 13 deletions

View file

@ -436,9 +436,19 @@ static BOOLEAN KeyboardHandler(PKINTERRUPT Interrupt, PVOID Context)
BYTE thisKey;
BOOL isDown;
static BYTE lastKey;
CHAR Status;
CHECKPOINT;
/*
* Check status
*/
Status = READ_PORT_UCHAR((PUCHAR)KBD_CTRL_PORT);
if (!(Status & KBD_OBF))
{
return (FALSE);
}
// Read scan code
thisKey=READ_PORT_UCHAR((PUCHAR)KBD_DATA_PORT);
if ((thisKey==0xE0)||(thisKey==0xE1)) // Extended key
@ -585,6 +595,23 @@ static void KeyboardConnectInterrupt(void)
FALSE);
}
VOID
KbdClearInput(VOID)
{
ULONG i;
CHAR Status;
for (i = 0; i < 100; i++)
{
Status = READ_PORT_UCHAR((PUCHAR)KBD_CTRL_PORT);
if (!(Status & KBD_OBF))
{
return;
}
(VOID)READ_PORT_UCHAR((PUCHAR)KBD_DATA_PORT);
}
}
static int InitializeKeyboard(void)
{
// Initialize variables
@ -598,6 +625,7 @@ static int InitializeKeyboard(void)
ctrlKeyState=0;
extKey=0;
KbdClearInput();
KeyboardConnectInterrupt();
KeInitializeDpc(&KbdDpc,KbdDpcRoutine,NULL);
return 0;

View file

@ -1,4 +1,4 @@
# $Id: makefile,v 1.2 2000/11/20 19:59:11 ekohl Exp $
# $Id: makefile,v 1.3 2001/04/10 17:48:17 dwelch Exp $
#
#
PATH_TO_TOP = ../../..
@ -7,7 +7,7 @@ TARGET=keyboard
OBJECTS = $(TARGET).o $(TARGET).coff ../../../ntoskrnl/ntoskrnl.a
CFLAGS = -O2 -I.
CFLAGS = -O2 -I. -g
all: $(TARGET).sys $(TARGET).sys.unstripped

View file

@ -1,4 +1,4 @@
# $Id: Makefile,v 1.30 2001/04/09 02:45:03 dwelch Exp $
# $Id: Makefile,v 1.31 2001/04/10 17:48:16 dwelch Exp $
#
# ReactOS Operating System
#
@ -16,7 +16,7 @@ ARCH := i386
#
# Whether to compile in the kernel debugger
#
KDBG := 0
KDBG := 1
#
# Whether to compile for debugging
@ -24,18 +24,33 @@ KDBG := 0
DBG := 1
#
# Whether to compile a multiprocessor or single processor version
#
MP := 0
#
#
#
CONFIG :=
ifeq ($(DBG), 1)
CFLAGS_DBG := -g -DDBG
CFLAGS_DBG := -g
CONFIG += DBG
else
CFLAGS_DBG :=
endif
ifeq ($(KDBG), 1)
CFLAGS_KDBG := -DKDBG
OBJECTS_KDBG := dbg/kdb.o dbg/kdb_keyboard.o dbg/i386/kdb_help.o
CONFIG += KDBG
else
CFLAGS_KDBG :=
OBJECTS_KDBG :=
endif
ifeq ($(MP), 1)
CONFIG += MP
else
CONFIG += UP
endif
TARGETNAME := ntoskrnl
@ -43,11 +58,11 @@ TARGETNAME := ntoskrnl
OBJECTS_PATH = objects
ASFLAGS = -Iinclude
CFLAGS = -Iinclude -D__NTOSKRNL__ $(CFLAGS_DBG) $(CFLAGS_KDBG) -Wall -Werror
CFLAGS = -Iinclude -D__NTOSKRNL__ $(CFLAGS_DBG) -Wall -Werror
include $(PATH_TO_TOP)/rules.mak
all: $(EXE_PREFIX)depends$(EXE_POSTFIX) \
all: config $(EXE_PREFIX)depends$(EXE_POSTFIX) \
$(OBJECTS_PATH) \
$(TARGETNAME).nostrip.exe \
$(TARGETNAME).exe \
@ -264,7 +279,8 @@ OBJECTS_DBG = \
dbg/dbgctrl.o \
dbg/errinfo.o \
dbg/print.o \
dbg/user.o
dbg/user.o \
$(OBJECTS_KDBG)
# Loader
OBJECTS_LDR = \
@ -597,6 +613,14 @@ ex/napi.o: ex/napi.c ../include/ntdll/napi.h
ke/main.o: ke/main.c ../include/reactos/buildno.h
mkconfig$(EXE_SUFFIX): mkconfig.c
$(HOST_CC) -g -o mkconfig$(EXE_SUFFIX) mkconfig.c
config:
$(EXE_PREFIX)mkconfig$(EXE_SUFFIX) include/internal/config.h $(CONFIG)
.PHONY: config
include $(D1_FILES)
.%.d: %.c $(EXE_PREFIX)depends$(EXE_POSTFIX)

View file

@ -0,0 +1,89 @@
#include <internal/ke.h>
#include <internal/i386/segment.h>
.globl _KdbEnter
_KdbEnter:
/*
* Set up a stack frame
*/
pushl %ebp
movl %esp, %ebp
/*
* Save registers
*/
pushl %edi
pushl %esi
pushl %ebx
/*
* Set up a trap frame
*/
pushl $0 /* V86_Gs */
pushl $0 /* V86_Fs */
pushl $0 /* V86_Ds */
pushl $0 /* V86_Es */
pushl %ss /* Ss */
pushl %ebp /* Esp */
pushfl /* Eflags */
pushl %cs /* Cs */
pushl 4(%ebp) /* Eip */
pushl $0 /* ErrorCode */
pushl 0(%ebp) /* Ebp */
pushl %ebx /* Ebx */
pushl %esi /* Esi */
pushl %edi /* Edi */
pushl %fs /* Fs */
pushl $0 /* ExceptionList */
pushl $0 /* PreviousMode */
pushl %eax /* Eax */
pushl %ecx /* Ecx */
pushl %edx /* Edx */
pushl %ds /* Ds */
pushl %es /* Es */
pushl %gs /* Gs */
pushl $0 /* Dr7 */
pushl $0 /* Dr6 */
pushl $0 /* Dr3 */
pushl $0 /* Dr2 */
pushl $0 /* Dr1 */
pushl $0 /* Dr0 */
pushl $0 /* TempEip */
pushl $0 /* TempCs */
pushl $0 /* DebugPointer */
pushl $0 /* DebugArgMark */
pushl $0 /* DebugEip */
pushl $0 /* DebugEbp */
/*
* Push a pointer to the trap frame
*/
pushl %esp
/*
* Call KDB
*/
call _KdbInternalEnter
/*
* Pop the argument and destroy the trap frame
*/
popl %eax
addl $KTRAP_FRAME_SIZE, %esp
/*
* Restore registers
*/
popl %ebx
popl %esi
popl %edi
/*
* Return
*/
popl %ebp
ret

View file

@ -0,0 +1,95 @@
/*
* ReactOS kernel
* Copyright (C) 2001 David Welch <welch@cwcom.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* $Id: kdb.c,v 1.1 2001/04/10 17:48:16 dwelch Exp $
*
* PROJECT: ReactOS kernel
* FILE: ntoskrnl/dbg/kdb.c
* PURPOSE: Kernel debugger
* PROGRAMMER: David Welch (welch@mcmail.com)
* UPDATE HISTORY:
* Created 01/03/01
*/
/* INCLUDES ******************************************************************/
#include <ddk/ntddk.h>
#include <internal/ke.h>
#include "kdb.h"
#define NDEBUG
#include <internal/debug.h>
/* FUNCTIONS *****************************************************************/
VOID
KdbGetCommand(PCH Buffer)
{
CHAR Key;
for (;;)
{
while ((Key = KdbTryGetCharKeyboard()) == -1);
if (Key == '\r' || Key == '\n')
{
DbgPrint("\n");
*Buffer = 0;
return;
}
DbgPrint("%c", Key);
*Buffer = Key;
Buffer++;
}
}
ULONG
KdbMainLoop(VOID)
{
CHAR Command[256];
for (;;)
{
DbgPrint("kdb:> ");
KdbGetCommand(Command);
switch (Command[0])
{
/* Continue. */
case 'c':
return(0);
/* Bug check the system */
case 'p':
KeBugCheck(0);
break;
}
}
}
VOID
KdbInternalEnter(PKTRAP_FRAME Tf)
{
__asm__ __volatile__ ("cli\n\t");
(VOID)KdbMainLoop();
__asm__ __volatile__("sti\n\t");
}

View file

@ -0,0 +1,4 @@
ULONG
KdbTryGetCharKeyboard(VOID);
VOID
KdbEnter(VOID);

View file

@ -0,0 +1,354 @@
/*
* ReactOS kernel
* Copyright (C) 1998, 1999, 2000, 2001 ReactOS Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* PROJECT: ReactOS kernel
* FILE: ntoskrnl/dbg/kdb_keyboard.c
* PURPOSE: Keyboard driver
* PROGRAMMER: Victor Kirhenshtein (sauros@iname.com)
* Jason Filby (jasonfilby@yahoo.com)
*/
/* INCLUDES ****************************************************************/
#include <ddk/ntddk.h>
#include <string.h>
#include <ntos/keyboard.h>
#include <ntos/minmax.h>
#define NDEBUG
#include <debug.h>
#if 1
#define KBD_STATUS_REG 0x64
#define KBD_CNTL_REG 0x64
#define KBD_DATA_REG 0x60
#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
#define kbd_read_input() READ_PORT_UCHAR((PUCHAR)KBD_DATA_REG)
#define kbd_read_status() READ_PORT_UCHAR((PUCHAR)KBD_STATUS_REG)
static unsigned char keyb_layout[2][128] =
{
"\000\0331234567890-=\177\t" /* 0x00 - 0x0f */
"qwertyuiop[]\r\000as" /* 0x10 - 0x1f */
"dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */
"bnm,./\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */
"\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */
"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
"\r\000/" /* 0x60 - 0x6f */
,
"\000\033!@#$%^&*()_+\177\t" /* 0x00 - 0x0f */
"QWERTYUIOP{}\r\000AS" /* 0x10 - 0x1f */
"DFGHJKL:\"`\000\\ZXCV" /* 0x20 - 0x2f */
"BNM<>?\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */
"\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */
"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
"\r\000/" /* 0x60 - 0x6f */
};
typedef BYTE byte_t;
CHAR
KdbTryGetCharKeyboard()
{
static byte_t last_key = 0;
static byte_t shift = 0;
char c;
while(1) {
unsigned char status = kbd_read_status();
while (status & KBD_STAT_OBF) {
byte_t scancode;
scancode = kbd_read_input();
/* check for SHIFT-keys */
if (((scancode & 0x7F) == 42) || ((scancode & 0x7F) == 54))
{
shift = !(scancode & 0x80);
continue;
}
/* ignore all other RELEASED-codes */
if (scancode & 0x80)
last_key = 0;
else if (last_key != scancode)
{
//printf("kbd: %d, %d, %c\n", scancode, last_key, keyb_layout[shift][scancode]);
last_key = scancode;
c = keyb_layout[shift][scancode];
if (c > 0) return c;
}
}
}
}
#endif
#if 0
/* GLOBALS *******************************************************************/
/*
* Keyboard I/O ports.
*/
#define K_RDWR 0x60 /* keyboard data & cmds (read/write) */
#define K_STATUS 0x64 /* keybd status (read-only) */
#define K_CMD 0x64 /* keybd ctlr command (write-only) */
/*
* Bit definitions for K_STATUS port.
*/
#define K_OBUF_FUL 0x01 /* output (from keybd) buffer full */
#define K_IBUF_FUL 0x02 /* input (to keybd) buffer full */
#define K_SYSFLAG 0x04 /* "System Flag" */
#define K_CMD_DATA 0x08 /* 1 = input buf has cmd, 0 = data */
#define K_KBD_INHIBIT 0x10 /* 0 if keyboard inhibited */
#define K_AUX_OBUF_FUL 0x20 /* 1 = obuf holds aux device data */
#define K_TIMEOUT 0x40 /* timout error flag */
#define K_PARITY_ERROR 0x80 /* parity error flag */
/*
* Keyboard controller commands (sent to K_CMD port).
*/
#define KC_CMD_READ 0x20 /* read controller command byte */
#define KC_CMD_WRITE 0x60 /* write controller command byte */
#define KC_CMD_DIS_AUX 0xa7 /* disable auxiliary device */
#define KC_CMD_ENB_AUX 0xa8 /* enable auxiliary device */
#define KC_CMD_TEST_AUX 0xa9 /* test auxiliary device interface */
#define KC_CMD_SELFTEST 0xaa /* keyboard controller self-test */
#define KC_CMD_TEST 0xab /* test keyboard interface */
#define KC_CMD_DUMP 0xac /* diagnostic dump */
#define KC_CMD_DISABLE 0xad /* disable keyboard */
#define KC_CMD_ENABLE 0xae /* enable keyboard */
#define KC_CMD_RDKBD 0xc4 /* read keyboard ID */
#define KC_CMD_WIN 0xd0 /* read output port */
#define KC_CMD_WOUT 0xd1 /* write output port */
#define KC_CMD_ECHO 0xee /* used for diagnostic testing */
#define KC_CMD_PULSE 0xff /* pulse bits 3-0 based on low nybble */
/*
* Keyboard commands (send to K_RDWR).
*/
#define K_CMD_LEDS 0xed /* set status LEDs (caps lock, etc.) */
#define K_CMD_TYPEMATIC 0xf3 /* set key repeat and delay */
/*
* Bit definitions for controller command byte (sent following
* KC_CMD_WRITE command).
*
* Bits 0x02 and 0x80 unused, always set to 0.
*/
#define K_CB_ENBLIRQ 0x01 /* enable data-ready intrpt */
#define K_CB_SETSYSF 0x04 /* Set System Flag */
#define K_CB_INHBOVR 0x08 /* Inhibit Override */
#define K_CB_DISBLE 0x10 /* disable keyboard */
#define K_CB_IGNPARITY 0x20 /* ignore parity from keyboard */
#define K_CB_SCAN 0x40 /* standard scan conversion */
/*
* Bit definitions for "Indicator Status Byte" (sent after a
* K_CMD_LEDS command). If the bit is on, the LED is on. Undefined
* bit positions must be 0.
*/
#define K_LED_SCRLLK 0x1 /* scroll lock */
#define K_LED_NUMLK 0x2 /* num lock */
#define K_LED_CAPSLK 0x4 /* caps lock */
/*
* Bit definitions for "Miscellaneous port B" (K_PORTB).
*/
/* read/write */
#define K_ENABLETMR2 0x01 /* enable output from timer 2 */
#define K_SPKRDATA 0x02 /* direct input to speaker */
#define K_ENABLEPRTB 0x04 /* "enable" port B */
#define K_EIOPRTB 0x08 /* enable NMI on parity error */
/* read-only */
#define K_REFRESHB 0x10 /* refresh flag from INLTCONT PAL */
#define K_OUT2B 0x20 /* timer 2 output */
#define K_ICKB 0x40 /* I/O channel check (parity error) */
/*
* Bit definitions for the keyboard controller's output port.
*/
#define KO_SYSRESET 0x01 /* processor reset */
#define KO_GATE20 0x02 /* A20 address line enable */
#define KO_AUX_DATA_OUT 0x04 /* output data to auxiliary device */
#define KO_AUX_CLOCK 0x08 /* auxiliary device clock */
#define KO_OBUF_FUL 0x10 /* keyboard output buffer full */
#define KO_AUX_OBUF_FUL 0x20 /* aux device output buffer full */
#define KO_CLOCK 0x40 /* keyboard clock */
#define KO_DATA_OUT 0x80 /* output data to keyboard */
/*
* Keyboard return codes.
*/
#define K_RET_RESET_DONE 0xaa /* BAT complete */
#define K_RET_ECHO 0xee /* echo after echo command */
#define K_RET_ACK 0xfa /* ack */
#define K_RET_RESET_FAIL 0xfc /* BAT error */
#define K_RET_RESEND 0xfe /* resend request */
#define SHIFT -1
#define CTRL -2
#define META -3
static char keymap[128][2] = {
{0}, /* 0 */
{27, 27}, /* 1 - ESC */
{'1', '!'}, /* 2 */
{'2', '@'},
{'3', '#'},
{'4', '$'},
{'5', '%'},
{'6', '^'},
{'7', '&'},
{'8', '*'},
{'9', '('},
{'0', ')'},
{'-', '_'},
{'=', '+'},
{8, 8}, /* 14 - Backspace */
{'\t', '\t'}, /* 15 */
{'q', 'Q'},
{'w', 'W'},
{'e', 'E'},
{'r', 'R'},
{'t', 'T'},
{'y', 'Y'},
{'u', 'U'},
{'i', 'I'},
{'o', 'O'},
{'p', 'P'},
{'[', '{'},
{']', '}'}, /* 27 */
{'\r', '\r'}, /* 28 - Enter */
{CTRL, CTRL}, /* 29 - Ctrl */
{'a', 'A'}, /* 30 */
{'s', 'S'},
{'d', 'D'},
{'f', 'F'},
{'g', 'G'},
{'h', 'H'},
{'j', 'J'},
{'k', 'K'},
{'l', 'L'},
{';', ':'},
{'\'', '"'}, /* 40 */
{'`', '~'}, /* 41 */
{SHIFT, SHIFT}, /* 42 - Left Shift */
{'\\', '|'}, /* 43 */
{'z', 'Z'}, /* 44 */
{'x', 'X'},
{'c', 'C'},
{'v', 'V'},
{'b', 'B'},
{'n', 'N'},
{'m', 'M'},
{',', '<'},
{'.', '>'},
{'/', '?'}, /* 53 */
{SHIFT, SHIFT}, /* 54 - Right Shift */
{0, 0}, /* 55 - Print Screen */
{META, META}, /* 56 - Alt */
{' ', ' '}, /* 57 - Space bar */
{0, 0}, /* 58 - Caps Lock */
{0, 0}, /* 59 - F1 */
{0, 0}, /* 60 - F2 */
{0, 0}, /* 61 - F3 */
{0, 0}, /* 62 - F4 */
{0, 0}, /* 63 - F5 */
{0, 0}, /* 64 - F6 */
{0, 0}, /* 65 - F7 */
{0, 0}, /* 66 - F8 */
{0, 0}, /* 67 - F9 */
{0, 0}, /* 68 - F10 */
{0, 0}, /* 69 - Num Lock */
{0, 0}, /* 70 - Scroll Lock */
{'7', '7'}, /* 71 - Numeric keypad 7 */
{'8', '8'}, /* 72 - Numeric keypad 8 */
{'9', '9'}, /* 73 - Numeric keypad 9 */
{'-', '-'}, /* 74 - Numeric keypad '-' */
{'4', '4'}, /* 75 - Numeric keypad 4 */
{'5', '5'}, /* 76 - Numeric keypad 5 */
{'6', '6'}, /* 77 - Numeric keypad 6 */
{'+', '+'}, /* 78 - Numeric keypad '+' */
{'1', '1'}, /* 79 - Numeric keypad 1 */
{'2', '2'}, /* 80 - Numeric keypad 2 */
{'3', '3'}, /* 81 - Numeric keypad 3 */
{'0', '0'}, /* 82 - Numeric keypad 0 */
{'.', '.'}, /* 83 - Numeric keypad '.' */
};
/* FUNCTIONS *****************************************************************/
/*
* Quick poll for a pending input character.
* Returns a character if available, -1 otherwise. This routine can return
* false negatives in the following cases:
*
* - a valid character is in transit from the keyboard when called
* - a key release is received (from a previous key press)
* - a SHIFT key press is received (shift state is recorded however)
* - a key press for a multi-character sequence is received
*
* Yes, this is horrible.
*/
ULONG
KdbTryGetCharKeyboard(VOID)
{
static unsigned shift_state, ctrl_state, meta_state;
unsigned scan_code, ch;
/* See if a scan code is ready, returning if none. */
if ((READ_PORT_UCHAR((PUCHAR)K_STATUS) & K_OBUF_FUL) == 0) {
return -1;
}
scan_code = READ_PORT_UCHAR((PUCHAR)K_RDWR);
/* Handle key releases - only release of SHIFT is important. */
if (scan_code & 0x80) {
scan_code &= 0x7f;
if (keymap[scan_code][0] == SHIFT)
shift_state = 0;
else if (keymap[scan_code][0] == CTRL)
ctrl_state = 0;
else if (keymap[scan_code][0] == META)
meta_state = 0;
ch = -1;
} else {
/* Translate the character through the keymap. */
ch = keymap[scan_code][shift_state] | meta_state;
if (ch == SHIFT) {
shift_state = 1;
ch = -1;
} else if (ch == CTRL) {
ctrl_state = 1;
ch = -1;
} else if (ch == META) {
meta_state = 0200;
ch = -1;
} else if (ch == 0)
ch = -1;
else if (ctrl_state)
ch = (keymap[scan_code][1] - '@') | meta_state;
}
return ch;
}
#endif

View file

@ -0,0 +1,4 @@
/* Automatically generated, don't edit */
#define DBG
#define KDBG
#define UP

View file

@ -22,14 +22,20 @@
/* INCLUDES *****************************************************************/
#ifndef __ASM__
#include <ddk/ntddk.h>
#include <stdarg.h>
#endif /* not __ASM__ */
/* INTERNAL KERNEL FUNCTIONS ************************************************/
#ifndef __ASM__
struct _KTHREAD;
#endif /* not __ASM__ */
#define KTRAP_FRAME_DEBUGEBP (0x0)
#define KTRAP_FRAME_DEBUGEIP (0x4)
#define KTRAP_FRAME_DEBUGARGMARK (0x8)
@ -74,6 +80,9 @@ struct _KTHREAD;
#define KTRAP_FRAME_RESERVED8 (0x86)
#define KTRAP_FRAME_V86_GS (0x88)
#define KTRAP_FRAME_RESERVED9 (0x8A)
#define KTRAP_FRAME_SIZE (0x8C)
#ifndef __ASM__
typedef struct _KTRAP_FRAME
{
@ -180,4 +189,7 @@ KiDispatchException(PEXCEPTION_RECORD Er,
BOOLEAN SearchFrames);
VOID KeTrapFrameToContext(PKTRAP_FRAME TrapFrame,
PCONTEXT Context);
#endif /* not __ASM__ */
#endif

View file

@ -1,4 +1,4 @@
/* $Id: kdebug.c,v 1.22 2001/04/09 02:45:04 dwelch Exp $
/* $Id: kdebug.c,v 1.23 2001/04/10 17:48:17 dwelch Exp $
*
* COPYRIGHT: See COPYING in the top level directory
* PROJECT: ReactOS kernel
@ -13,6 +13,8 @@
#include <internal/ntoskrnl.h>
#include <internal/kd.h>
#include <internal/mm.h>
#include <internal/config.h>
#include "../dbg/kdb.h"
/* serial debug connection */
#define DEFAULT_DEBUG_PORT 2 /* COM2 */
@ -394,8 +396,10 @@ KdSystemDebugControl(ULONG Code)
/* K - Enter the system debugger. */
else if (Code == 10)
{
#if KDBG
#ifdef KDBG
KdbEnter();
#else /* KDBG */
DbgPrint("No local kernel debugger\n");
#endif /* not KDBG */
}
}

View file

@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* $Id: main.c,v 1.85 2001/03/27 21:43:42 dwelch Exp $
/* $Id: main.c,v 1.86 2001/04/10 17:48:17 dwelch Exp $
*
* PROJECT: ReactOS kernel
* FILE: ntoskrnl/ke/main.c
@ -42,6 +42,8 @@
#include <internal/v86m.h>
#include <internal/kd.h>
#include <internal/trap.h>
#include <internal/config.h>
#include "../dbg/kdb.h"
#define NDEBUG
#include <internal/debug.h>
@ -502,6 +504,13 @@ _main (ULONG MultiBootMagic, PLOADER_PARAMETER_BLOCK _LoaderBlock)
/* Report all resources used by hal */
HalReportResourceUsage ();
/*
* Enter the kernel debugger before starting up the boot drivers
*/
#ifdef KDBG
KdbEnter();
#endif /* KDBG */
/*
* Initalize services loaded at boot time

100
reactos/ntoskrnl/mkconfig.c Normal file
View file

@ -0,0 +1,100 @@
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#define max(a, b) ((a) > (b) ? (a) : (b))
int
write_if_change(char* outbuf, char* filename)
{
FILE* out;
unsigned int end;
char* cmpbuf;
unsigned int stat;
out = fopen(filename, "rb");
if (out == NULL)
{
out = fopen(filename, "wb");
if (out == NULL)
{
fprintf(stderr, "Unable to create output file\n");
return(1);
}
fputs(outbuf, out);
fclose(out);
return(0);
}
fseek(out, 0, SEEK_END);
end = ftell(out);
cmpbuf = malloc(end);
if (cmpbuf == NULL)
{
fprintf(stderr, "Out of memory\n");
fclose(out);
return(1);
}
fseek(out, 0, SEEK_SET);
stat = fread(cmpbuf, 1, end, out);
if (stat != end)
{
fprintf(stderr, "Failed to read data\n");
fclose(out);
return(1);
}
if (memcmp(cmpbuf, outbuf, max(end, strlen(outbuf))) == 0)
{
fclose(out);
return(0);
}
fclose(out);
out = fopen(filename, "wb");
if (out == NULL)
{
fprintf(stderr, "Unable to create output file\n");
return(1);
}
stat = fwrite(outbuf, 1, strlen(outbuf), out);
if (strlen(outbuf) != stat)
{
fprintf(stderr, "Unable to write output file\n");
fclose(out);
return(1);
}
fclose(out);
return(0);
}
int
main(int argc, char* argv[])
{
unsigned int i;
char* outbuf;
char* s;
if (argc == 1)
{
fprintf(stderr, "Not enough arguments\n");
return(1);
}
outbuf = malloc(256 * 1024);
if (outbuf == NULL)
{
fprintf(stderr, "Out of memory 1\n");
return(1);
}
s = outbuf;
s = s + sprintf(s, "/* Automatically generated, don't edit */\n");
for (i = 2; i < argc; i++)
{
s = s + sprintf(s, "#define %s\n", argv[i]);
}
return(write_if_change(outbuf, argv[1]));
}