[ARP] Replace some hard-coded strings by message resources

sdk/include/reactos/mc/CMakeLists.txt

@@ -3,6 +3,7 @@ list(APPEND ANSI_SOURCE
      bugcodes.mc)
 
 list(APPEND UNICODE_SOURCE
+     arp_msg.mc
      errcodes.mc
      net_msg.mc
      neteventmsg.mc

sdk/include/reactos/mc/arp_msg.mc

@@ -0,0 +1,123 @@
+MessageIdTypedef=DWORD
+
+SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
+               Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
+               Warning=0x2:STATUS_SEVERITY_WARNING
+               Error=0x3:STATUS_SEVERITY_ERROR
+              )
+
+FacilityNames=(System=0x0:FACILITY_SYSTEM
+              )
+
+LanguageNames=(English=0x409:MSG00409
+              )
+
+MessageId=10000
+SymbolicName=MSG_ARP_SYNTAX
+Severity=Success
+Facility=System
+Language=English
+Displays and modifies the IP-to-Physical address translation tables used by
+address resolution protocol (ARP).
+
+ARP -s inet_addr eth_addr [if_addr]
+ARP -d inet_addr [if_addr]
+ARP -a [inet_addr] [-N if_addr]
+
+  -a            Displays current ARP entries by interrogating the current
+                protocol data.  If inet_addr is specified, the IP and Physical
+                addresses for only the specified computer are displayed.  If
+                more than one network interface uses ARP, entries for each ARP
+                table are displayed.
+  -g            Same as -a.
+  inet_addr     Specifies an internet address.
+  -N if_addr    Displays the ARP entries for the network interface specified
+                by if_addr.
+  -d            Deletes the host specified by inet_addr. inet_addr may be
+                wildcarded with * to delete all hosts.
+  -s            Adds the host and associates the Internet address inet_addr
+                with the Physical address eth_addr.  The Physical address is
+                given as 6 hexadecimal bytes separated by hyphens. The entry
+                is permanent.
+  eth_addr      Specifies a physical address.
+  if_addr       If present, this specifies the Internet address of the
+                interface whose address translation table should be modified.
+                If not present, the first applicable interface will be used.
+Example:
+  > arp -s 157.55.85.212   00-aa-00-62-c6-09  .... Adds a static entry.
+  > arp -a                                    .... Displays the arp table.
+.
+
+MessageId=10001
+SymbolicName=MSG_ARP_BAD_IP_ADDRESS
+Severity=Success
+Facility=System
+Language=English
+ARP: bad IP address: %1
+.
+
+MessageId=10002
+SymbolicName=MSG_ARP_BAD_ARGUMENT
+Severity=Success
+Facility=System
+Language=English
+ARP: bad argument: %1
+.
+
+MessageId=10003
+SymbolicName=MSG_ARP_INTERFACE
+Severity=Success
+Facility=System
+Language=English
+
+Interface: %1!s! --- 0x%2!lx!
+  Internet Address      Physical Address      Type
+.
+
+MessageId=10005
+SymbolicName=MSG_ARP_OTHER
+Severity=Success
+Facility=System
+Language=English
+other%0
+.
+
+MessageId=10006
+SymbolicName=MSG_ARP_INVALID
+Severity=Success
+Facility=System
+Language=English
+invalid%0
+.
+
+MessageId=10007
+SymbolicName=MSG_ARP_DYNAMIC
+Severity=Success
+Facility=System
+Language=English
+dynamic%0
+.
+
+MessageId=10008
+SymbolicName=MSG_ARP_STATIC
+Severity=Success
+Facility=System
+Language=English
+static%0
+.
+
+MessageId=10013
+SymbolicName=MSG_ARP_ENTRY_FORMAT
+Severity=Success
+Facility=System
+Language=English
+  %1!-20s!  %2!-20s!  %3!-10s!
+.
+
+MessageId=10018
+SymbolicName=MSG_ARP_NO_ENTRIES
+Severity=Success
+Facility=System
+Language=English
+No ARP entires found
+.