reactos/drivers/usb/usbuhci/hardware.h

192 lines
6.1 KiB
C
Raw Normal View History

/*
* Copyright 2004-2006, Haiku Inc. All rights reserved.
* Distributed under the terms of the MIT License.
*
* Authors:
* Michael Lotz <mmlr@mlotz.ch>
* Niels S. Reedijk
*/
#ifndef UHCI_HARDWARE_H
#define UHCI_HARDWARE_H
/************************************************************
* The Registers *
************************************************************/
// R/W -- Read/Write
// R/WC -- Read/Write Clear
// ** -- Only writable with words!
// PCI register
#define PCI_LEGSUP 0xC0
#define PCI_LEGSUP_USBPIRQDEN 0x2000
#define PCI_LEGSUP_CLEAR_SMI 0x8f00
// Registers
#define UHCI_USBCMD 0x00 // USB Command - word - R/W
#define UHCI_USBSTS 0x02 // USB Status - word - R/WC
#define UHCI_USBINTR 0x04 // USB Interrupt Enable - word - R/W
#define UHCI_FRNUM 0x06 // Frame number - word - R/W**
#define UHCI_FRBASEADD 0x08 // Frame List BAse Address - dword - R/W
#define UHCI_SOFMOD 0x0c // Start of Frame Modify - byte - R/W
#define UHCI_PORTSC1 0x10 // Port 1 Status/Control - word - R/WC**
#define UHCI_PORTSC2 0x12 // Port 2 Status/Control - word - R/WC**
// USBCMD
#define UHCI_USBCMD_RS 0x01 // Run/Stop
#define UHCI_USBCMD_HCRESET 0x02 // Host Controller Reset
#define UHCI_USBCMD_GRESET 0x04 // Global Reset
#define UHCI_USBCMD_EGSM 0x08 // Enter Global Suspend mode
#define UHCI_USBCMD_FGR 0x10 // Force Global resume
#define UHCI_USBCMD_SWDBG 0x20 // Software Debug
#define UHCI_USBCMD_CF 0x40 // Configure Flag
#define UHCI_USBCMD_MAXP 0x80 // Max packet
//USBSTS
#define UHCI_USBSTS_USBINT 0x01 // USB interrupt
#define UHCI_USBSTS_ERRINT 0x02 // USB error interrupt
#define UHCI_USBSTS_RESDET 0x04 // Resume Detect
#define UHCI_USBSTS_HOSTERR 0x08 // Host System Error
#define UHCI_USBSTS_HCPRERR 0x10 // Host Controller Process error
#define UHCI_USBSTS_HCHALT 0x20 // HCHalted
//USBINTR
#define UHCI_USBINTR_CRC 0x01 // Timeout/ CRC interrupt enable
#define UHCI_USBINTR_RESUME 0x02 // Resume interrupt enable
#define UHCI_USBINTR_IOC 0x04 // Interrupt on complete enable
#define UHCI_USBINTR_SHORT 0x08 // Short packet interrupt enable
//PORTSC
#define UHCI_PORTSC_CURSTAT 0x0001 // Current connect status
#define UHCI_PORTSC_STATCHA 0x0002 // Current connect status change
#define UHCI_PORTSC_ENABLED 0x0004 // Port enabled/disabled
#define UHCI_PORTSC_ENABCHA 0x0008 // Change in enabled/disabled
#define UHCI_PORTSC_LINE_0 0x0010 // The status of D+
#define UHCI_PORTSC_LINE_1 0x0020 // The status of D-
#define UHCI_PORTSC_RESUME 0x0040 // Something with the suspend state ???
#define UHCI_PORTSC_LOWSPEED 0x0100 // Low speed device attached?
#define UHCI_PORTSC_RESET 0x0200 // Port is in reset
#define UHCI_PORTSC_SUSPEND 0x1000 // Set port in suspend state
#define UHCI_PORTSC_DATAMASK 0x13f5 // Mask that excludes the change bits
/************************************************************
* Hardware structs *
************************************************************/
// Framelist flags
#define FRAMELIST_TERMINATE 0x1
#define FRAMELIST_NEXT_IS_QH 0x2
// Number of frames
#define NUMBER_OF_FRAMES 1024
#define MAX_AVAILABLE_BANDWIDTH 900 // Microseconds
// Represents a Transfer Descriptor (TD)
typedef struct _UHCI_TRANSFER_DESCRIPTOR
{
ULONG LinkPhysical; // Link to next transfer descriptor / queue head
ULONG Status; // status
ULONG Token; // packet header
ULONG BufferPhysical; // pointer to the buffer
// Software part
ULONG PhysicalAddress; // Physical address of this descriptor
PVOID NextLogicalDescriptor;
ULONG BufferSize; // Size of the buffer
PVOID BufferLogical; // Logical pointer to the buffer
PVOID UserBuffer;
}UHCI_TRANSFER_DESCRIPTOR, *PUHCI_TRANSFER_DESCRIPTOR;
#define TD_NEXT_IS_QH 0x02
// Control and Status
#define TD_CONTROL_SPD (1 << 29)
#define TD_CONTROL_3_ERRORS (3 << 27)
#define TD_CONTROL_LOWSPEED (1 << 26)
#define TD_CONTROL_ISOCHRONOUS (1 << 25)
#define TD_CONTROL_IOC (1 << 24)
#define TD_STATUS_ACTIVE (1 << 23)
#define TD_STATUS_ERROR_STALLED (1 << 22)
#define TD_STATUS_ERROR_BUFFER (1 << 21)
#define TD_STATUS_ERROR_BABBLE (1 << 20)
#define TD_STATUS_ERROR_NAK (1 << 19)
#define TD_STATUS_ERROR_CRC (1 << 18)
#define TD_STATUS_ERROR_TIMEOUT (1 << 18)
#define TD_STATUS_ERROR_BITSTUFF (1 << 17)
#define TD_STATUS_ACTLEN_MASK 0x07ff
#define TD_STATUS_ACTLEN_NULL 0x07ff
// Token
#define TD_TOKEN_MAXLEN_SHIFT 21
#define TD_TOKEN_NULL_DATA (0x07ff << TD_TOKEN_MAXLEN_SHIFT)
#define TD_TOKEN_DATA_TOGGLE_SHIFT 19
#define TD_TOKEN_DATA1 (1 << TD_TOKEN_DATA_TOGGLE_SHIFT)
#define TD_TOKEN_SETUP 0x2d
#define TD_TOKEN_IN 0x69
#define TD_TOKEN_OUT 0xe1
#define TD_TOKEN_ENDPTADDR_SHIFT 15
#define TD_TOKEN_DEVADDR_SHIFT 8
#define TD_DEPTH_FIRST 0x04
#define TD_TERMINATE 0x01
#define TD_ERROR_MASK 0x440000
#define TD_ERROR_COUNT_SHIFT 27
#define TD_ERROR_COUNT_MASK 0x03
#define TD_LINK_MASK 0xfffffff0
static
inline
ULONG
UHCI_TRANSFER_DESCRIPTOR_MAXIMUM_LENGTH(PUHCI_TRANSFER_DESCRIPTOR Descriptor)
{
ULONG Length = (Descriptor->Token >> TD_TOKEN_MAXLEN_SHIFT) + 1;
if (Length == TD_STATUS_ACTLEN_NULL + 1)
return 0;
return Length;
}
static
inline
ULONG
UHCI_TRANSFER_DESCRIPTOR_LENGTH(PUHCI_TRANSFER_DESCRIPTOR Descriptor)
{
ULONG Length = (Descriptor->Status & TD_STATUS_ACTLEN_MASK) + 1;
if (Length == TD_STATUS_ACTLEN_NULL + 1)
return 0;
return Length;
}
// Represents a Queue Head (QH)
typedef struct _UHCI_QUEUE_HEAD
{
// hardware part
ULONG LinkPhysical; // address
ULONG ElementPhysical; // next descriptor
// Software part
ULONG PhysicalAddress;
PVOID NextLogicalDescriptor;
PVOID Request;
PVOID NextElementDescriptor;
}UHCI_QUEUE_HEAD, *PUHCI_QUEUE_HEAD;
#define QH_TERMINATE 0x01
#define QH_NEXT_IS_QH 0x02
#define QH_LINK_MASK 0xfffffff0
#define UHCI_INTERRUPT_QUEUE 0
#define UHCI_LOW_SPEED_CONTROL_QUEUE 1
#define UHCI_FULL_SPEED_CONTROL_QUEUE 2
#define UHCI_BULK_QUEUE 3
#define UHCI_DEBUG_QUEUE 4
#endif /* UHCI_HARDWARE_H */