[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
|
[SETUPLIB][USETUP][INPUT.CPL] MUI integration with setuplib.
[SETUPLIB] Copy the mui* files from usetup into the setuplib for later usage, and add mui.c to build.
svn path=/branches/setup_improvements/; revision=75711
[SETUPLIB][USETUP] Start massaging the MUI files and split up what concerns only the usetup "resources",
and what concerns general language parameters (in the setuplib).
It may be interesting to retrieve the language parameters
from INF file (e.g. intl.inf) (suggested by Giannis).
svn path=/branches/setup_improvements/; revision=75715
[SETUPLIB] Add the necessary headers to mui.c to be able to compile.
[USETUP] Comment out the languages that don't have any resources.
svn path=/branches/setup_improvements/; revision=75716
[SETUPLIB][USETUP] Adjust MUI and settings code.
- Re-enable settings code concerning language, keyboards & layout
in the setuplib, and remove the old code in usetup.
- Remove useless code in setuplib's mui.c.
- Rename usetup's MUI "LanguageList" into "ResourceList" so as to
avoid colliding with the "LanguageList" of setuplib.
- Add the magic CMakeLists line "add_definitions(${I18N_DEFS})" that
I forgot previously, that caused the "LanguageList" of setuplib to be empty!
The code compiles and works during my tests.
svn path=/branches/setup_improvements/; revision=75717
[SETUPLIB] Change some string pointer types & function prototypes so that the usetup-specific
"SelectedLanguageId" variable is not used in the library.
svn path=/branches/setup_improvements/; revision=75719
[SETUPLIB] Change some function prototypes so that the usetup-specific "SelectedLanguageId" variable is not used in the library.
Also, make AddEntriesFromInfSection(), DefaultProcessEntry() and the typedef PPROCESS_ENTRY_ROUTINE private again.
svn path=/branches/setup_improvements/; revision=75720
svn path=/branches/setup_improvements/; revision=75724
[USETUP] Code adaptations.
- Transform some do{}while() loops into while(){} ones, since the lists on which we work may only contain one single {NULL} element.
- Modify MUIGetOEMCodePage() call after r75719.
- Use PCWSTR where needed.
svn path=/branches/setup_improvements/; revision=75722
[USETUP] Adjust some MUI & settings calls, following the commits r75719, r75720 and r75721.
svn path=/branches/setup_improvements/; revision=75723
[INPUT.CPL] Adjust inclusion of "muifonts.h" (commit 3dbd44f) due to changes introduced in r75711 and r75715.
2017-08-30 11:28:52 +00:00
|
|
|
add_definitions(${I18N_DEFS})
|
2022-06-25 16:44:37 +00:00
|
|
|
if(_WINKD_)
|
|
|
|
|
add_definitions(-D_WINKD_)
|
|
|
|
|
endif()
|
2024-11-22 20:45:06 +00:00
|
|
|
add_definitions(-D_SETUPLIB_)
|
[SETUPLIB][USETUP][INPUT.CPL] MUI integration with setuplib.
[SETUPLIB] Copy the mui* files from usetup into the setuplib for later usage, and add mui.c to build.
svn path=/branches/setup_improvements/; revision=75711
[SETUPLIB][USETUP] Start massaging the MUI files and split up what concerns only the usetup "resources",
and what concerns general language parameters (in the setuplib).
It may be interesting to retrieve the language parameters
from INF file (e.g. intl.inf) (suggested by Giannis).
svn path=/branches/setup_improvements/; revision=75715
[SETUPLIB] Add the necessary headers to mui.c to be able to compile.
[USETUP] Comment out the languages that don't have any resources.
svn path=/branches/setup_improvements/; revision=75716
[SETUPLIB][USETUP] Adjust MUI and settings code.
- Re-enable settings code concerning language, keyboards & layout
in the setuplib, and remove the old code in usetup.
- Remove useless code in setuplib's mui.c.
- Rename usetup's MUI "LanguageList" into "ResourceList" so as to
avoid colliding with the "LanguageList" of setuplib.
- Add the magic CMakeLists line "add_definitions(${I18N_DEFS})" that
I forgot previously, that caused the "LanguageList" of setuplib to be empty!
The code compiles and works during my tests.
svn path=/branches/setup_improvements/; revision=75717
[SETUPLIB] Change some string pointer types & function prototypes so that the usetup-specific
"SelectedLanguageId" variable is not used in the library.
svn path=/branches/setup_improvements/; revision=75719
[SETUPLIB] Change some function prototypes so that the usetup-specific "SelectedLanguageId" variable is not used in the library.
Also, make AddEntriesFromInfSection(), DefaultProcessEntry() and the typedef PPROCESS_ENTRY_ROUTINE private again.
svn path=/branches/setup_improvements/; revision=75720
svn path=/branches/setup_improvements/; revision=75724
[USETUP] Code adaptations.
- Transform some do{}while() loops into while(){} ones, since the lists on which we work may only contain one single {NULL} element.
- Modify MUIGetOEMCodePage() call after r75719.
- Use PCWSTR where needed.
svn path=/branches/setup_improvements/; revision=75722
[USETUP] Adjust some MUI & settings calls, following the commits r75719, r75720 and r75721.
svn path=/branches/setup_improvements/; revision=75723
[INPUT.CPL] Adjust inclusion of "muifonts.h" (commit 3dbd44f) due to changes introduced in r75711 and r75715.
2017-08-30 11:28:52 +00:00
|
|
|
|
2018-01-06 15:47:37 +00:00
|
|
|
include_directories(spapisup utils)
|
2017-08-28 11:28:08 +00:00
|
|
|
|
2024-11-22 20:45:06 +00:00
|
|
|
spec2def(setuplib.dll setuplib.spec ADD_IMPORTLIB)
|
|
|
|
|
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
list(APPEND SOURCE
|
2018-01-06 15:47:37 +00:00
|
|
|
spapisup/fileqsup.c
|
|
|
|
|
spapisup/infsupp.c
|
2017-08-28 11:28:08 +00:00
|
|
|
utils/arcname.c
|
|
|
|
|
utils/bldrsup.c
|
2024-07-12 16:39:39 +00:00
|
|
|
utils/devutils.c
|
2017-08-28 11:28:08 +00:00
|
|
|
utils/filesup.c
|
2020-10-11 21:42:02 +00:00
|
|
|
utils/fsrec.c
|
2017-08-28 11:28:08 +00:00
|
|
|
utils/genlist.c
|
|
|
|
|
utils/inicache.c
|
|
|
|
|
utils/ntverrsrc.c
|
|
|
|
|
utils/osdetect.c
|
2020-11-11 00:37:16 +00:00
|
|
|
utils/partinfo.c
|
2017-08-28 11:28:08 +00:00
|
|
|
utils/partlist.c
|
|
|
|
|
utils/regutil.c
|
[SETUPLIB][REACTOS][USETUP] Split FS-volume-specific functionality from partitions (#7258)
CORE-13525
This greatly helps in reducing code complexity in some areas: code that
previously iterated over all partitions of a given disk, just to find
which ones were partitioned and contained a valid file system, now just
have to iterate over mounted volumes.
See in particular, `lib/utils/osdetect.c` and `lib/fsutil.c` .
- Remove FORMATSTATE "Preformatted" enum value;
- Cleanup osdetect code after introducing Volume support;
- Some simplifications for FormatState.
- Differentiate between 'new' partition and 'new' volume:
* "New" partition: it has been created and added in the cached list,
but not yet actually written into the disk.
* "New" volume: newly-created volume (may be backed by a partition or
not), not yet formatted. May exist on either new, or not new partition,
or elsewhere.
- Cache partition and volume NT device names.
These do not change across repartitioning operations, as long as the
partition or the filesystem volume hasn't been deleted/recreated.
This avoids doing \Device\Harddisk%u\Partition%u sprintf's everytime
we need to retrieve the given partition or volume device name.
When a partition/fileysystem volume is "virtually" created (i.e. in
the partition list, but not yet committed to disk and exposed to the
OS), no device partition number and device name are available yet.
In particular, validate that no manipulation of \Device\HarddiskM\Partition0
(i.e. the whole disk) is being made.
2024-05-18 21:09:16 +00:00
|
|
|
utils/volutil.c
|
2020-10-17 18:29:47 +00:00
|
|
|
bootcode.c
|
2017-08-26 11:42:32 +00:00
|
|
|
bootsup.c
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
fsutil.c
|
2018-01-07 00:35:48 +00:00
|
|
|
install.c
|
[SETUPLIB][USETUP][INPUT.CPL] MUI integration with setuplib.
[SETUPLIB] Copy the mui* files from usetup into the setuplib for later usage, and add mui.c to build.
svn path=/branches/setup_improvements/; revision=75711
[SETUPLIB][USETUP] Start massaging the MUI files and split up what concerns only the usetup "resources",
and what concerns general language parameters (in the setuplib).
It may be interesting to retrieve the language parameters
from INF file (e.g. intl.inf) (suggested by Giannis).
svn path=/branches/setup_improvements/; revision=75715
[SETUPLIB] Add the necessary headers to mui.c to be able to compile.
[USETUP] Comment out the languages that don't have any resources.
svn path=/branches/setup_improvements/; revision=75716
[SETUPLIB][USETUP] Adjust MUI and settings code.
- Re-enable settings code concerning language, keyboards & layout
in the setuplib, and remove the old code in usetup.
- Remove useless code in setuplib's mui.c.
- Rename usetup's MUI "LanguageList" into "ResourceList" so as to
avoid colliding with the "LanguageList" of setuplib.
- Add the magic CMakeLists line "add_definitions(${I18N_DEFS})" that
I forgot previously, that caused the "LanguageList" of setuplib to be empty!
The code compiles and works during my tests.
svn path=/branches/setup_improvements/; revision=75717
[SETUPLIB] Change some string pointer types & function prototypes so that the usetup-specific
"SelectedLanguageId" variable is not used in the library.
svn path=/branches/setup_improvements/; revision=75719
[SETUPLIB] Change some function prototypes so that the usetup-specific "SelectedLanguageId" variable is not used in the library.
Also, make AddEntriesFromInfSection(), DefaultProcessEntry() and the typedef PPROCESS_ENTRY_ROUTINE private again.
svn path=/branches/setup_improvements/; revision=75720
svn path=/branches/setup_improvements/; revision=75724
[USETUP] Code adaptations.
- Transform some do{}while() loops into while(){} ones, since the lists on which we work may only contain one single {NULL} element.
- Modify MUIGetOEMCodePage() call after r75719.
- Use PCWSTR where needed.
svn path=/branches/setup_improvements/; revision=75722
[USETUP] Adjust some MUI & settings calls, following the commits r75719, r75720 and r75721.
svn path=/branches/setup_improvements/; revision=75723
[INPUT.CPL] Adjust inclusion of "muifonts.h" (commit 3dbd44f) due to changes introduced in r75711 and r75715.
2017-08-30 11:28:52 +00:00
|
|
|
mui.c
|
2017-06-30 19:07:02 +00:00
|
|
|
registry.c
|
2017-08-28 14:46:49 +00:00
|
|
|
settings.c
|
2017-08-09 20:39:45 +00:00
|
|
|
setuplib.c
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
precomp.h)
|
|
|
|
|
|
2025-04-20 16:15:22 +00:00
|
|
|
# Static library used for the dll and for setuplib_unittest.
|
|
|
|
|
add_library(setuplib_static ${SOURCE})
|
|
|
|
|
add_pch(setuplib_static precomp.h SOURCE)
|
|
|
|
|
add_dependencies(setuplib_static xdk) # psdk
|
|
|
|
|
|
2024-11-22 20:45:06 +00:00
|
|
|
add_library(setuplib SHARED
|
2025-04-20 16:15:22 +00:00
|
|
|
main.c
|
2024-11-22 20:45:06 +00:00
|
|
|
setuplib.rc
|
|
|
|
|
${CMAKE_CURRENT_BINARY_DIR}/setuplib.def)
|
2025-04-20 16:15:22 +00:00
|
|
|
target_link_libraries(setuplib setuplib_static)
|
2024-11-22 20:45:06 +00:00
|
|
|
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
add_dependencies(setuplib xdk) # psdk
|
2024-11-22 20:45:06 +00:00
|
|
|
set_module_type(setuplib nativedll)
|
|
|
|
|
target_link_libraries(setuplib ext2lib vfatlib btrfslib ${PSEH_LIB})
|
|
|
|
|
add_importlibs(setuplib ntdll)
|
|
|
|
|
add_cd_file(TARGET setuplib DESTINATION reactos/system32 NO_CAB FOR bootcd regtest)
|