reactos/hal/halx86/generic/timer.c

318 lines
8.7 KiB
C
Raw Normal View History

/*
* PROJECT: ReactOS HAL
* LICENSE: GPL - See COPYING in the top level directory
* PURPOSE: HAL Timer Routines
* PROGRAMMERS: Alex Ionescu (alex.ionescu@reactos.org)
* Timo Kreuzer (timo.kreuzer@reactos.org)
*/
/* INCLUDES ******************************************************************/
#include <hal.h>
#define NDEBUG
#include <debug.h>
/* GLOBALS *******************************************************************/
#define PIT_LATCH 0x00
extern HALP_ROLLOVER HalpRolloverTable[15];
LARGE_INTEGER HalpLastPerfCounter;
LARGE_INTEGER HalpPerfCounter;
ULONG HalpPerfCounterCutoff;
BOOLEAN HalpClockSetMSRate;
ULONG HalpCurrentTimeIncrement;
ULONG HalpCurrentRollOver;
ULONG HalpNextMSRate = 14;
ULONG HalpLargestClockMS = 15;
/* PRIVATE FUNCTIONS *********************************************************/
FORCEINLINE
ULONG
HalpRead8254Value(void)
{
ULONG TimerValue;
/* Send counter latch command for channel 0 */
__outbyte(TIMER_CONTROL_PORT, PIT_LATCH);
__nop();
/* Read the value, LSB first */
TimerValue = __inbyte(TIMER_CHANNEL0_DATA_PORT);
__nop();
TimerValue |= __inbyte(TIMER_CHANNEL0_DATA_PORT) << 8;
return TimerValue;
}
VOID
NTAPI
HalpSetTimerRollOver(USHORT RollOver)
{
ULONG_PTR Flags;
TIMER_CONTROL_PORT_REGISTER TimerControl;
/* Disable interrupts */
Flags = __readeflags();
_disable();
/* Program the PIT for binary mode */
TimerControl.BcdMode = FALSE;
/*
* Program the PIT to generate a normal rate wave (Mode 2) on channel 0.
* Channel 0 is used for the IRQ0 clock interval timer, and channel
* 1 is used for DRAM refresh.
*
* Mode 2 gives much better accuracy than Mode 3.
*/
TimerControl.OperatingMode = PitOperatingMode2;
TimerControl.Channel = PitChannel0;
/* Set the access mode that we'll use to program the reload value */
TimerControl.AccessMode = PitAccessModeLowHigh;
/* Now write the programming bits */
__outbyte(TIMER_CONTROL_PORT, TimerControl.Bits);
/* Next we write the reload value for channel 0 */
__outbyte(TIMER_CHANNEL0_DATA_PORT, RollOver & 0xFF);
__outbyte(TIMER_CHANNEL0_DATA_PORT, RollOver >> 8);
/* Restore interrupts if they were previously enabled */
__writeeflags(Flags);
}
CODE_SEG("INIT")
VOID
NTAPI
HalpInitializeClock(VOID)
{
ULONG Increment;
USHORT RollOver;
DPRINT("HalpInitializeClock()\n");
#if defined(SARCH_PC98)
HalpInitializeClockPc98();
#endif
/* Get increment and rollover for the largest time clock ms possible */
Increment = HalpRolloverTable[HalpLargestClockMS - 1].Increment;
RollOver = (USHORT)HalpRolloverTable[HalpLargestClockMS - 1].RollOver;
/* Set the maximum and minimum increment with the kernel */
KeSetTimeIncrement(Increment, HalpRolloverTable[0].Increment);
/* Set the rollover value for the timer */
HalpSetTimerRollOver(RollOver);
/* Save rollover and increment */
HalpCurrentRollOver = RollOver;
HalpCurrentTimeIncrement = Increment;
}
#ifdef _M_IX86
#ifndef _MINIHAL_
VOID
FASTCALL
HalpClockInterruptHandler(IN PKTRAP_FRAME TrapFrame)
{
ULONG LastIncrement;
KIRQL Irql;
/* Enter trap */
KiEnterInterruptTrap(TrapFrame);
/* Start the interrupt */
if (HalBeginSystemInterrupt(CLOCK2_LEVEL, PRIMARY_VECTOR_BASE + PIC_TIMER_IRQ, &Irql))
{
/* Update the performance counter */
HalpPerfCounter.QuadPart += HalpCurrentRollOver;
HalpPerfCounterCutoff = KiEnableTimerWatchdog;
/* Save increment */
LastIncrement = HalpCurrentTimeIncrement;
/* Check if someone changed the time rate */
if (HalpClockSetMSRate)
{
/* Update the global values */
HalpCurrentTimeIncrement = HalpRolloverTable[HalpNextMSRate - 1].Increment;
HalpCurrentRollOver = HalpRolloverTable[HalpNextMSRate - 1].RollOver;
/* Set new timer rollover */
HalpSetTimerRollOver((USHORT)HalpCurrentRollOver);
/* We're done */
HalpClockSetMSRate = FALSE;
}
/* Update the system time -- the kernel will exit this trap */
KeUpdateSystemTime(TrapFrame, LastIncrement, Irql);
}
/* Spurious, just end the interrupt */
KiEoiHelper(TrapFrame);
}
VOID
FASTCALL
HalpProfileInterruptHandler(IN PKTRAP_FRAME TrapFrame)
{
KIRQL Irql;
/* Enter trap */
KiEnterInterruptTrap(TrapFrame);
/* Start the interrupt */
if (HalBeginSystemInterrupt(PROFILE_LEVEL, PRIMARY_VECTOR_BASE + PIC_RTC_IRQ, &Irql))
{
#if defined(SARCH_PC98)
/* Clear the interrupt flag */
HalpAcquireCmosSpinLock();
(VOID)__inbyte(RTC_IO_i_INTERRUPT_RESET);
HalpReleaseCmosSpinLock();
#else
/* Spin until the interrupt pending bit is clear */
HalpAcquireCmosSpinLock();
while (HalpReadCmos(RTC_REGISTER_C) & RTC_REG_C_IRQ)
NOTHING;
HalpReleaseCmosSpinLock();
#endif
/* If profiling is enabled, call the kernel function */
if (!HalpProfilingStopped)
{
KeProfileInterrupt(TrapFrame);
}
/* Finish the interrupt */
_disable();
HalEndSystemInterrupt(Irql, TrapFrame);
}
/* Spurious, just end the interrupt */
KiEoiHelper(TrapFrame);
}
#endif /* !_MINIHAL_ */
#endif /* _M_IX86 */
/* PUBLIC FUNCTIONS ***********************************************************/
/*
* @implemented
*/
VOID
NTAPI
HalCalibratePerformanceCounter(IN volatile PLONG Count,
IN ULONGLONG NewCount)
{
ULONG_PTR Flags;
/* Disable interrupts */
Flags = __readeflags();
_disable();
/* Do a decrement for this CPU */
_InterlockedDecrement(Count);
/* Wait for other CPUs */
while (*Count);
/* Restore interrupts if they were previously enabled */
__writeeflags(Flags);
}
/*
* @implemented
*/
ULONG
NTAPI
HalSetTimeIncrement(IN ULONG Increment)
{
/* Round increment to ms */
Increment /= 10000;
/* Normalize between our minimum (1 ms) and maximum (variable) setting */
if (Increment > HalpLargestClockMS) Increment = HalpLargestClockMS;
if (Increment <= 0) Increment = 1;
/* Set the rate and tell HAL we want to change it */
HalpNextMSRate = Increment;
HalpClockSetMSRate = TRUE;
/* Return the increment */
return HalpRolloverTable[Increment - 1].Increment;
}
LARGE_INTEGER
NTAPI
KeQueryPerformanceCounter(PLARGE_INTEGER PerformanceFrequency)
{
LARGE_INTEGER CurrentPerfCounter;
ULONG CounterValue, ClockDelta;
KIRQL OldIrql;
/* If caller wants performance frequency, return hardcoded value */
if (PerformanceFrequency) PerformanceFrequency->QuadPart = PIT_FREQUENCY;
/* Check if we were called too early */
if (HalpCurrentRollOver == 0) return HalpPerfCounter;
/* Check if interrupts are disabled */
if(!(__readeflags() & EFLAGS_INTERRUPT_MASK)) return HalpPerfCounter;
/* Raise irql to DISPATCH_LEVEL */
OldIrql = KeGetCurrentIrql();
if (OldIrql < DISPATCH_LEVEL) KfRaiseIrql(DISPATCH_LEVEL);
do
{
/* Get the current performance counter value */
CurrentPerfCounter = HalpPerfCounter;
/* Read the 8254 counter value */
CounterValue = HalpRead8254Value();
/* Repeat if the value has changed (a clock interrupt happened) */
} while (CurrentPerfCounter.QuadPart != HalpPerfCounter.QuadPart);
/* After someone changed the clock rate, during the first clock cycle we
might see a counter value larger than the rollover. In this case we
pretend it already has the new rollover value. */
if (CounterValue > HalpCurrentRollOver) CounterValue = HalpCurrentRollOver;
/* The interrupt is issued on the falling edge of the OUT line, when the
counter changes from 1 to max. Calculate a clock delta, so that directly
after the interrupt it is 0, going up to (HalpCurrentRollOver - 1). */
ClockDelta = HalpCurrentRollOver - CounterValue;
/* Add the clock delta */
CurrentPerfCounter.QuadPart += ClockDelta;
/* Check if the value is smaller then before, this means, we somehow
missed an interrupt. This is a sign that the timer interrupt
is very inaccurate. Probably a virtual machine. */
if (CurrentPerfCounter.QuadPart < HalpLastPerfCounter.QuadPart)
{
/* We missed an interrupt. Assume we will receive it later */
CurrentPerfCounter.QuadPart += HalpCurrentRollOver;
}
/* Update the last counter value */
HalpLastPerfCounter = CurrentPerfCounter;
/* Restore previous irql */
if (OldIrql < DISPATCH_LEVEL) KfLowerIrql(OldIrql);
/* Return the result */
return CurrentPerfCounter;
}
/* EOF */