[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
/*
* PROJECT : ReactOS Setup Library
* LICENSE : GPL - 2.0 + ( https : //spdx.org/licenses/GPL-2.0+)
* PURPOSE : Partition list functions
2019-02-24 16:52:33 +00:00
* COPYRIGHT : Copyright 2003 - 2019 Casper S . Hornstrup ( chorns @ users . sourceforge . net )
* Copyright 2018 - 2019 Hermes Belusca - Maito
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
*/
# pragma once
2018-01-28 22:24:06 +00:00
/* HELPERS FOR PARTITION TYPES **********************************************/
typedef struct _PARTITION_TYPE
{
UCHAR Type ;
PCHAR Description ;
} PARTITION_TYPE , * PPARTITION_TYPE ;
# define NUM_PARTITION_TYPE_ENTRIES 143
extern PARTITION_TYPE PartitionTypes [ NUM_PARTITION_TYPE_ENTRIES ] ;
/* PARTITION UTILITY FUNCTIONS **********************************************/
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
typedef enum _FORMATSTATE
{
Unformatted ,
UnformattedOrDamaged ,
UnknownFormat ,
Preformatted ,
Formatted
} FORMATSTATE , * PFORMATSTATE ;
typedef struct _PARTENTRY
{
LIST_ENTRY ListEntry ;
/* The disk this partition belongs to */
struct _DISKENTRY * DiskEntry ;
/* Partition geometry */
ULARGE_INTEGER StartSector ;
ULARGE_INTEGER SectorCount ;
BOOLEAN BootIndicator ;
UCHAR PartitionType ;
ULONG HiddenSectors ;
2018-11-22 02:26:47 +00:00
ULONG OnDiskPartitionNumber ; /* Enumerated partition number (primary partitions first, excluding the extended partition container, then the logical partitions) */
ULONG PartitionNumber ; /* Current partition number, only valid for the currently running NTOS instance */
ULONG PartitionIndex ; /* Index in the LayoutBuffer->PartitionEntry[] cached array of the corresponding DiskEntry */
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
2018-01-28 22:24:06 +00:00
WCHAR DriveLetter ;
WCHAR VolumeLabel [ 20 ] ;
2019-02-24 16:52:33 +00:00
WCHAR FileSystem [ MAX_PATH + 1 ] ;
FORMATSTATE FormatState ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
BOOLEAN LogicalPartition ;
/* Partition is partitioned disk space */
BOOLEAN IsPartitioned ;
2019-02-24 16:52:33 +00:00
/** The following three properties may be replaced by flags **/
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
/* Partition is new, table does not exist on disk yet */
BOOLEAN New ;
/* Partition was created automatically */
BOOLEAN AutoCreate ;
/* Partition must be checked */
BOOLEAN NeedsCheck ;
} PARTENTRY , * PPARTENTRY ;
typedef struct _BIOSDISKENTRY
{
LIST_ENTRY ListEntry ;
ULONG DiskNumber ;
ULONG Signature ;
ULONG Checksum ;
BOOLEAN Recognized ;
CM_DISK_GEOMETRY_DEVICE_DATA DiskGeometry ;
CM_INT13_DRIVE_PARAMETER Int13DiskData ;
} BIOSDISKENTRY , * PBIOSDISKENTRY ;
typedef struct _DISKENTRY
{
LIST_ENTRY ListEntry ;
2019-03-05 00:42:33 +00:00
/* The list of disks/partitions this disk belongs to */
struct _PARTLIST * PartList ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
/* Disk geometry */
ULONGLONG Cylinders ;
ULONG TracksPerCylinder ;
ULONG SectorsPerTrack ;
ULONG BytesPerSector ;
ULARGE_INTEGER SectorCount ;
ULONG SectorAlignment ;
ULONG CylinderAlignment ;
/* BIOS parameters */
BOOLEAN BiosFound ;
ULONG BiosDiskNumber ;
2017-05-21 23:36:13 +00:00
// ULONG Signature; // Obtained from LayoutBuffer->Signature
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
// ULONG Checksum;
/* SCSI parameters */
ULONG DiskNumber ;
2017-05-21 23:36:13 +00:00
// SCSI_ADDRESS;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
USHORT Port ;
USHORT Bus ;
USHORT Id ;
/* Has the partition list been modified? */
BOOLEAN Dirty ;
2018-11-22 02:26:47 +00:00
BOOLEAN NewDisk ; /* If TRUE, the disk is uninitialized */
2018-12-13 23:30:12 +00:00
PARTITION_STYLE DiskStyle ; /* MBR/GPT-partitioned disk, or uninitialized disk (RAW) */
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
UNICODE_STRING DriverName ;
PDRIVE_LAYOUT_INFORMATION LayoutBuffer ;
// TODO: When adding support for GPT disks:
// Use PDRIVE_LAYOUT_INFORMATION_EX which indicates whether
// the disk is MBR, GPT, or unknown (uninitialized).
// Depending on the style, either use the MBR or GPT partition info.
2018-11-22 02:26:47 +00:00
LIST_ENTRY PrimaryPartListHead ; /* List of primary partitions */
LIST_ENTRY LogicalPartListHead ; /* List of logical partitions (Valid only for MBR-partitioned disks) */
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
2018-11-22 02:26:47 +00:00
/* Pointer to the unique extended partition on this disk (Valid only for MBR-partitioned disks) */
PPARTENTRY ExtendedPartition ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
} DISKENTRY , * PDISKENTRY ;
typedef struct _PARTLIST
{
/*
* The system partition where the boot manager resides .
* The corresponding system disk is obtained via :
* SystemPartition - > DiskEntry .
*/
PPARTENTRY SystemPartition ;
/*
* The original system partition in case we are redefining it because
* we do not have write support on it .
* Please note that this is partly a HACK and MUST NEVER happen on
* architectures where real system partitions are mandatory ( because then
* they are formatted in FAT FS and we support write operation on them ) .
* The corresponding original system disk is obtained via :
* OriginalSystemPartition - > DiskEntry .
*/
PPARTENTRY OriginalSystemPartition ;
LIST_ENTRY DiskListHead ;
LIST_ENTRY BiosDiskListHead ;
} PARTLIST , * PPARTLIST ;
# define PARTITION_TBL_SIZE 4
2018-12-13 23:30:12 +00:00
# define PARTITION_MAGIC 0xAA55
/* Defines system type for MBR showing that a GPT is following */
# define EFI_PMBR_OSTYPE_EFI 0xEE
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
# include <pshpack1.h>
typedef struct _PARTITION
{
unsigned char BootFlags ; /* bootable? 0=no, 128=yes */
unsigned char StartingHead ; /* beginning head number */
unsigned char StartingSector ; /* beginning sector number */
unsigned char StartingCylinder ; /* 10 bit nmbr, with high 2 bits put in begsect */
unsigned char PartitionType ; /* Operating System type indicator code */
unsigned char EndingHead ; /* ending head number */
unsigned char EndingSector ; /* ending sector number */
unsigned char EndingCylinder ; /* also a 10 bit nmbr, with same high 2 bit trick */
unsigned int StartingBlock ; /* first sector relative to start of disk */
unsigned int SectorCount ; /* number of sectors in partition */
} PARTITION , * PPARTITION ;
typedef struct _PARTITION_SECTOR
{
UCHAR BootCode [ 440 ] ; /* 0x000 */
ULONG Signature ; /* 0x1B8 */
UCHAR Reserved [ 2 ] ; /* 0x1BC */
PARTITION Partition [ PARTITION_TBL_SIZE ] ; /* 0x1BE */
USHORT Magic ; /* 0x1FE */
} PARTITION_SECTOR , * PPARTITION_SECTOR ;
# include <poppack.h>
typedef struct
{
LIST_ENTRY ListEntry ;
ULONG DiskNumber ;
ULONG Identifier ;
ULONG Signature ;
} BIOS_DISK , * PBIOS_DISK ;
ULONGLONG
AlignDown (
IN ULONGLONG Value ,
IN ULONG Alignment ) ;
ULONGLONG
AlignUp (
IN ULONGLONG Value ,
IN ULONG Alignment ) ;
ULONGLONG
RoundingDivide (
IN ULONGLONG Dividend ,
IN ULONGLONG Divisor ) ;
PPARTLIST
CreatePartitionList ( VOID ) ;
VOID
DestroyPartitionList (
IN PPARTLIST List ) ;
2017-05-21 23:36:13 +00:00
PDISKENTRY
GetDiskByBiosNumber (
IN PPARTLIST List ,
IN ULONG BiosDiskNumber ) ;
PDISKENTRY
GetDiskByNumber (
IN PPARTLIST List ,
IN ULONG DiskNumber ) ;
PDISKENTRY
GetDiskBySCSI (
IN PPARTLIST List ,
IN USHORT Port ,
IN USHORT Bus ,
IN USHORT Id ) ;
PDISKENTRY
GetDiskBySignature (
IN PPARTLIST List ,
IN ULONG Signature ) ;
PPARTENTRY
GetPartition (
// IN PPARTLIST List,
IN PDISKENTRY DiskEntry ,
IN ULONG PartitionNumber ) ;
BOOLEAN
GetDiskOrPartition (
IN PPARTLIST List ,
IN ULONG DiskNumber ,
IN ULONG PartitionNumber OPTIONAL ,
OUT PDISKENTRY * pDiskEntry ,
OUT PPARTENTRY * pPartEntry OPTIONAL ) ;
2019-03-05 00:42:33 +00:00
PPARTENTRY
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
SelectPartition (
IN PPARTLIST List ,
IN ULONG DiskNumber ,
IN ULONG PartitionNumber ) ;
PPARTENTRY
GetNextPartition (
2019-03-05 00:42:33 +00:00
IN PPARTLIST List ,
IN PPARTENTRY CurrentPart OPTIONAL ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
PPARTENTRY
GetPrevPartition (
2019-03-05 00:42:33 +00:00
IN PPARTLIST List ,
IN PPARTENTRY CurrentPart OPTIONAL ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
2018-11-18 18:07:23 +00:00
BOOLEAN
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
CreatePrimaryPartition (
IN PPARTLIST List ,
2019-02-24 18:04:57 +00:00
IN PPARTENTRY SelectedEntry ,
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
IN ULONGLONG SectorCount ,
IN BOOLEAN AutoCreate ) ;
2018-11-18 18:07:23 +00:00
BOOLEAN
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
CreateExtendedPartition (
IN PPARTLIST List ,
2019-02-24 18:04:57 +00:00
IN PPARTENTRY SelectedEntry ,
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
IN ULONGLONG SectorCount ) ;
2018-11-18 18:07:23 +00:00
BOOLEAN
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
CreateLogicalPartition (
IN PPARTLIST List ,
2019-02-24 18:04:57 +00:00
IN PPARTENTRY SelectedEntry ,
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
IN ULONGLONG SectorCount ,
IN BOOLEAN AutoCreate ) ;
2019-03-05 00:42:33 +00:00
BOOLEAN
2019-02-24 18:04:57 +00:00
DeletePartition (
IN PPARTLIST List ,
2019-03-05 00:42:33 +00:00
IN PPARTENTRY PartEntry ,
OUT PPARTENTRY * FreeRegion OPTIONAL ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
VOID
CheckActiveSystemPartition (
2019-03-05 00:42:33 +00:00
IN PPARTLIST List ,
IN BOOLEAN ForceSelect ,
IN PDISKENTRY AlternateDisk OPTIONAL ,
IN PPARTENTRY AlternatePart OPTIONAL ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
2019-02-24 18:04:57 +00:00
NTSTATUS
WritePartitions (
IN PDISKENTRY DiskEntry ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
BOOLEAN
WritePartitionsToDisk (
IN PPARTLIST List ) ;
BOOLEAN
SetMountedDeviceValue (
2018-01-28 22:24:06 +00:00
IN WCHAR Letter ,
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
IN ULONG Signature ,
IN LARGE_INTEGER StartingOffset ) ;
BOOLEAN
SetMountedDeviceValues (
IN PPARTLIST List ) ;
VOID
SetPartitionType (
IN PPARTENTRY PartEntry ,
IN UCHAR PartitionType ) ;
ERROR_NUMBER
PrimaryPartitionCreationChecks (
2019-02-24 18:04:57 +00:00
IN PPARTENTRY PartEntry ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
ERROR_NUMBER
ExtendedPartitionCreationChecks (
2019-02-24 18:04:57 +00:00
IN PPARTENTRY PartEntry ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
ERROR_NUMBER
LogicalPartitionCreationChecks (
2019-02-24 18:04:57 +00:00
IN PPARTENTRY PartEntry ) ;
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
BOOLEAN
GetNextUnformattedPartition (
IN PPARTLIST List ,
OUT PDISKENTRY * pDiskEntry OPTIONAL ,
OUT PPARTENTRY * pPartEntry ) ;
BOOLEAN
GetNextUncheckedPartition (
IN PPARTLIST List ,
OUT PDISKENTRY * pDiskEntry OPTIONAL ,
OUT PPARTENTRY * pPartEntry ) ;
/* EOF */