[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
/*
|
|
|
|
* PROJECT: ReactOS Setup Library
|
|
|
|
* LICENSE: GPL-2.0+ (https://spdx.org/licenses/GPL-2.0+)
|
|
|
|
* PURPOSE: Generic list functions
|
2018-05-27 19:33:07 +00:00
|
|
|
* COPYRIGHT: Copyright 2008-2018 Christoph von Wittich <christoph at reactos.org>
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
typedef struct _GENERIC_LIST_ENTRY
|
|
|
|
{
|
|
|
|
LIST_ENTRY Entry;
|
|
|
|
struct _GENERIC_LIST* List;
|
2017-12-29 18:09:56 +00:00
|
|
|
PVOID Data;
|
|
|
|
ULONG_PTR UiData; // Cache variable for any UI list that displays these items
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
} GENERIC_LIST_ENTRY, *PGENERIC_LIST_ENTRY;
|
|
|
|
|
|
|
|
typedef struct _GENERIC_LIST
|
|
|
|
{
|
|
|
|
LIST_ENTRY ListHead;
|
|
|
|
ULONG NumOfEntries;
|
|
|
|
PGENERIC_LIST_ENTRY CurrentEntry;
|
|
|
|
} GENERIC_LIST, *PGENERIC_LIST;
|
|
|
|
|
|
|
|
|
|
|
|
PGENERIC_LIST
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
CreateGenericList(VOID);
|
|
|
|
|
|
|
|
VOID
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
DestroyGenericList(
|
|
|
|
IN OUT PGENERIC_LIST List,
|
2017-12-29 18:09:56 +00:00
|
|
|
IN BOOLEAN FreeData);
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
|
|
|
|
BOOLEAN
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
AppendGenericListEntry(
|
|
|
|
IN OUT PGENERIC_LIST List,
|
2017-12-29 18:09:56 +00:00
|
|
|
IN PVOID Data,
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
IN BOOLEAN Current);
|
|
|
|
|
|
|
|
VOID
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
SetCurrentListEntry(
|
|
|
|
IN PGENERIC_LIST List,
|
|
|
|
IN PGENERIC_LIST_ENTRY Entry);
|
|
|
|
|
|
|
|
PGENERIC_LIST_ENTRY
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
GetCurrentListEntry(
|
|
|
|
IN PGENERIC_LIST List);
|
|
|
|
|
|
|
|
PGENERIC_LIST_ENTRY
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
GetFirstListEntry(
|
|
|
|
IN PGENERIC_LIST List);
|
|
|
|
|
|
|
|
PGENERIC_LIST_ENTRY
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
GetNextListEntry(
|
|
|
|
IN PGENERIC_LIST_ENTRY Entry);
|
|
|
|
|
|
|
|
PVOID
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
2017-12-29 18:09:56 +00:00
|
|
|
GetListEntryData(
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
IN PGENERIC_LIST_ENTRY Entry);
|
|
|
|
|
2017-12-29 18:09:56 +00:00
|
|
|
ULONG_PTR
|
|
|
|
GetListEntryUiData(
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
IN PGENERIC_LIST_ENTRY Entry);
|
|
|
|
|
|
|
|
ULONG
|
2024-11-22 20:45:06 +00:00
|
|
|
NTAPI
|
[SETUPLIB][USETUP] Introduce a 'SetupLib' library. CORE-13544
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
2017-05-17 23:37:41 +00:00
|
|
|
GetNumberOfListEntries(
|
|
|
|
IN PGENERIC_LIST List);
|
|
|
|
|
|
|
|
/* EOF */
|