reactos/win32ss/drivers/miniport/vga_new/vga.h

453 lines
17 KiB
C
Raw Normal View History

/*
* PROJECT: ReactOS VGA Miniport Driver
* LICENSE: Microsoft NT4 DDK Sample Code License
* FILE: win32ss/drivers/miniport/vga_new/vga.h
* PURPOSE: Main Header File
* PROGRAMMERS: Copyright (c) 1992 Microsoft Corporation
* ReactOS Portable Systems Group
*/
#ifndef _VGA_NEW_PCH_
#define _VGA_NEW_PCH_
#include <ntdef.h>
#include <dderror.h>
#include <miniport.h>
#include <video.h>
#include "cmdcnst.h"
//
// Base address of VGA memory range. Also used as base address of VGA
// memory when loading a font, which is done with the VGA mapped at A0000.
//
#define MEM_VGA 0xA0000
#define MEM_VGA_SIZE 0x20000
//
// For memory mapped IO
//
#define MEMORY_MAPPED_IO_OFFSET (0xB8000 - 0xA0000)
//
// Port definitions for filling the ACCESS_RANGES structure in the miniport
// information, defines the range of I/O ports the VGA spans.
// There is a break in the IO ports - a few ports are used for the parallel
// port. Those cannot be defined in the ACCESS_RANGE, but are still mapped
// so all VGA ports are in one address range.
//
#define VGA_BASE_IO_PORT 0x000003B0
#define VGA_START_BREAK_PORT 0x000003BB
#define VGA_END_BREAK_PORT 0x000003C0
#define VGA_MAX_IO_PORT 0x000003DF
//
// VGA register definitions
//
// eVb: 3.1 [VGA] - Use offsets from the VGA Port Address instead of absolute
#define CRTC_ADDRESS_PORT_MONO 0x0004 // CRT Controller Address and
#define CRTC_DATA_PORT_MONO 0x0005 // Data registers in mono mode
#define FEAT_CTRL_WRITE_PORT_MONO 0x000A // Feature Control write port
// in mono mode
#define INPUT_STATUS_1_MONO 0x000A // Input Status 1 register read
// port in mono mode
#define ATT_INITIALIZE_PORT_MONO INPUT_STATUS_1_MONO
// Register to read to reset
// Attribute Controller index/data
#define ATT_ADDRESS_PORT 0x0010 // Attribute Controller Address and
#define ATT_DATA_WRITE_PORT 0x0010 // Data registers share one port
// for writes, but only Address is
// readable at 0x3C0
#define ATT_DATA_READ_PORT 0x0011 // Attribute Controller Data reg is
// readable here
#define MISC_OUTPUT_REG_WRITE_PORT 0x0012 // Miscellaneous Output reg write
// port
#define INPUT_STATUS_0_PORT 0x0012 // Input Status 0 register read
// port
#define VIDEO_SUBSYSTEM_ENABLE_PORT 0x0013 // Bit 0 enables/disables the
// entire VGA subsystem
#define SEQ_ADDRESS_PORT 0x0014 // Sequence Controller Address and
#define SEQ_DATA_PORT 0x0015 // Data registers
#define DAC_PIXEL_MASK_PORT 0x0016 // DAC pixel mask reg
#define DAC_ADDRESS_READ_PORT 0x0017 // DAC register read index reg,
// write-only
#define DAC_STATE_PORT 0x0017 // DAC state (read/write),
// read-only
#define DAC_ADDRESS_WRITE_PORT 0x0018 // DAC register write index reg
#define DAC_DATA_REG_PORT 0x0019 // DAC data transfer reg
#define FEAT_CTRL_READ_PORT 0x001A // Feature Control read port
#define MISC_OUTPUT_REG_READ_PORT 0x001C // Miscellaneous Output reg read
// port
#define GRAPH_ADDRESS_PORT 0x001E // Graphics Controller Address
#define GRAPH_DATA_PORT 0x001F // and Data registers
#define CRTC_ADDRESS_PORT_COLOR 0x0024 // CRT Controller Address and
#define CRTC_DATA_PORT_COLOR 0x0025 // Data registers in color mode
#define FEAT_CTRL_WRITE_PORT_COLOR 0x002A // Feature Control write port
#define INPUT_STATUS_1_COLOR 0x002A // Input Status 1 register read
// port in color mode
// eVb: 3.2 [END]
#define ATT_INITIALIZE_PORT_COLOR INPUT_STATUS_1_COLOR
// Register to read to reset
// Attribute Controller index/data
// toggle in color mode
//
// Offsets in HardwareStateHeader->PortValue[] of save areas for non-indexed
// VGA registers.
//
#define CRTC_ADDRESS_MONO_OFFSET 0x04
#define FEAT_CTRL_WRITE_MONO_OFFSET 0x0A
#define ATT_ADDRESS_OFFSET 0x10
#define MISC_OUTPUT_REG_WRITE_OFFSET 0x12
#define VIDEO_SUBSYSTEM_ENABLE_OFFSET 0x13
#define SEQ_ADDRESS_OFFSET 0x14
#define DAC_PIXEL_MASK_OFFSET 0x16
#define DAC_STATE_OFFSET 0x17
#define DAC_ADDRESS_WRITE_OFFSET 0x18
#define GRAPH_ADDRESS_OFFSET 0x1E
#define CRTC_ADDRESS_COLOR_OFFSET 0x24
#define FEAT_CTRL_WRITE_COLOR_OFFSET 0x2A
//
// VGA indexed register indexes.
//
// CL-GD542x specific registers:
//
#define IND_CL_EXTS_ENB 0x06 // index in Sequencer to enable exts
#define IND_NORD_SCRATCH_PAD 0x09 // index in Seq of Nordic scratch pad
#define IND_CL_SCRATCH_PAD 0x0A // index in Seq of 542x scratch pad
#define IND_ALP_SCRATCH_PAD 0x15 // index in Seq of Alpine scratch pad
#define IND_CL_REV_REG 0x25 // index in CRTC of ID Register
#define IND_CL_ID_REG 0x27 // index in CRTC of ID Register
//
#define IND_CURSOR_START 0x0A // index in CRTC of the Cursor Start
#define IND_CURSOR_END 0x0B // and End registers
#define IND_CURSOR_HIGH_LOC 0x0E // index in CRTC of the Cursor Location
#define IND_CURSOR_LOW_LOC 0x0F // High and Low Registers
#define IND_VSYNC_END 0x11 // index in CRTC of the Vertical Sync
// End register, which has the bit
// that protects/unprotects CRTC
// index registers 0-7
#define IND_CR2C 0x2C // Nordic LCD Interface Register
#define IND_CR2D 0x2D // Nordic LCD Display Control
#define IND_SET_RESET_ENABLE 0x01 // index of Set/Reset Enable reg in GC
#define IND_DATA_ROTATE 0x03 // index of Data Rotate reg in GC
#define IND_READ_MAP 0x04 // index of Read Map reg in Graph Ctlr
#define IND_GRAPH_MODE 0x05 // index of Mode reg in Graph Ctlr
#define IND_GRAPH_MISC 0x06 // index of Misc reg in Graph Ctlr
#define IND_BIT_MASK 0x08 // index of Bit Mask reg in Graph Ctlr
#define IND_SYNC_RESET 0x00 // index of Sync Reset reg in Seq
#define IND_MAP_MASK 0x02 // index of Map Mask in Sequencer
#define IND_MEMORY_MODE 0x04 // index of Memory Mode reg in Seq
#define IND_CRTC_PROTECT 0x11 // index of reg containing regs 0-7 in
// CRTC
#define IND_CRTC_COMPAT 0x34 // index of CRTC Compatibility reg
// in CRTC
#define IND_PERF_TUNING 0x16 // index of performance tuning in Seq
#define START_SYNC_RESET_VALUE 0x01 // value for Sync Reset reg to start
// synchronous reset
#define END_SYNC_RESET_VALUE 0x03 // value for Sync Reset reg to end
// synchronous reset
//
// Value to write to Extensions Control register values extensions.
//
#define CL64xx_EXTENSION_ENABLE_INDEX 0x0A // GR0A to be exact!
#define CL64xx_EXTENSION_ENABLE_VALUE 0xEC
#define CL64xx_EXTENSION_DISABLE_VALUE 0xCE
#define CL64xx_TRISTATE_CONTROL_REG 0xA1
#define CL6340_ENABLE_READBACK_REGISTER 0xE0
#define CL6340_ENABLE_READBACK_ALLSEL_VALUE 0xF0
#define CL6340_ENABLE_READBACK_OFF_VALUE 0x00
#define CL6340_IDENTIFICATION_REGISTER 0xE9
//
// Values for Attribute Controller Index register to turn video off
// and on, by setting bit 5 to 0 (off) or 1 (on).
//
#define VIDEO_DISABLE 0
#define VIDEO_ENABLE 0x20
#define INDEX_ENABLE_AUTO_START 0x31
// Masks to keep only the significant bits of the Graphics Controller and
// Sequencer Address registers. Masking is necessary because some VGAs, such
// as S3-based ones, don't return unused bits set to 0, and some SVGAs use
// these bits if extensions are enabled.
//
#define GRAPH_ADDR_MASK 0x0F
#define SEQ_ADDR_MASK 0x07
//
// Mask used to toggle Chain4 bit in the Sequencer's Memory Mode register.
//
#define CHAIN4_MASK 0x08
//
// Value written to the Read Map register when identifying the existence of
// a VGA in VgaInitialize. This value must be different from the final test
// value written to the Bit Mask in that routine.
//
#define READ_MAP_TEST_SETTING 0x03
//
// Default text mode setting for various registers, used to restore their
// states if VGA detection fails after they've been modified.
//
#define MEMORY_MODE_TEXT_DEFAULT 0x02
#define BIT_MASK_DEFAULT 0xFF
#define READ_MAP_DEFAULT 0x00
//
// Palette-related info.
//
//
// Highest valid DAC color register index.
//
#define VIDEO_MAX_COLOR_REGISTER 0xFF
//
// Highest valid palette register index
//
#define VIDEO_MAX_PALETTE_REGISTER 0x0F
//
// Driver Specific Attribute Flags
//
#define CAPS_NO_HOST_XFER 0x00000002 // Do not use host xfers to
// the blt engine.
#define CAPS_SW_POINTER 0x00000004 // Use software pointer.
#define CAPS_TRUE_COLOR 0x00000008 // Set upper color registers.
#define CAPS_MM_IO 0x00000010 // Use memory mapped IO.
#define CAPS_BLT_SUPPORT 0x00000020 // BLTs are supported
#define CAPS_IS_542x 0x00000040 // This is a 542x
#define CAPS_IS_5436 0x00000080 // This is a 5436
#define CAPS_CURSOR_VERT_EXP 0x00000100 // Flag set if 8x6 panel,
// but 6x4 resolution
//
// Structure used to describe each video mode in ModesVGA[].
//
typedef struct {
USHORT fbType; // color or monochrome, text or graphics, via
// VIDEO_MODE_COLOR and VIDEO_MODE_GRAPHICS
USHORT numPlanes; // # of video memory planes
USHORT bitsPerPlane; // # of bits of color in each plane
SHORT col; // # of text columns across screen with default font
SHORT row; // # of text rows down screen with default font
USHORT hres; // # of pixels across screen
USHORT vres; // # of scan lines down screen
// eVb: 3.2 [VGA] - Store frequency next to resolution data
ULONG Frequency; // Vertical Frequency
// eVb: 3.2 [END]
USHORT wbytes; // # of bytes from start of one scan line to start of next
ULONG sbytes; // total size of addressable display memory in bytes
// eVb: 3.3 [VBE] - Add VBE mode and bank flag
ULONG NoBankSwitch;
ULONG Mode;
// eVb: 3.3 [VBE]
PUSHORT CmdStream; // pointer to array of register-setting commands to
// set up mode
// eVb: 3.4 [VBE] - Add fields to track linear addresses/sizes and flags
ULONG PhysBase;
ULONG FrameBufferBase;
ULONG FrameBufferSize;
ULONG PhysSize;
ULONG LogicalWidth;
ULONG NonVgaMode;
ULONG Granularity;
// eVb: 3.4 [END]
} VIDEOMODE, *PVIDEOMODE;
//
// Mode into which to put the VGA before starting a VDM, so it's a plain
// vanilla VGA. (This is the mode's index in ModesVGA[], currently standard
// 80x25 text mode.)
//
#define DEFAULT_MODE 0
//
// Info used by the Validator functions and save/restore code.
// Structure used to trap register accesses that must be done atomically.
//
#define VGA_MAX_VALIDATOR_DATA 100
#define VGA_VALIDATOR_UCHAR_ACCESS 1
#define VGA_VALIDATOR_USHORT_ACCESS 2
#define VGA_VALIDATOR_ULONG_ACCESS 3
typedef struct _VGA_VALIDATOR_DATA {
ULONG Port;
UCHAR AccessType;
ULONG Data;
} VGA_VALIDATOR_DATA, *PVGA_VALIDATOR_DATA;
//
// Number of bytes to save in each plane.
//
#define VGA_PLANE_SIZE 0x10000
//
// Number of each type of indexed register in a standard VGA, used by
// validator and state save/restore functions.
//
// Note: VDMs currently only support basic VGAs only.
//
#define VGA_NUM_SEQUENCER_PORTS 5
#define VGA_NUM_CRTC_PORTS 25
#define VGA_NUM_GRAPH_CONT_PORTS 9
#define VGA_NUM_ATTRIB_CONT_PORTS 21
#define VGA_NUM_DAC_ENTRIES 256
#define EXT_NUM_GRAPH_CONT_PORTS 0
#define EXT_NUM_SEQUENCER_PORTS 0
#define EXT_NUM_CRTC_PORTS 0
#define EXT_NUM_ATTRIB_CONT_PORTS 0
#define EXT_NUM_DAC_ENTRIES 0
//
// These constants determine the offsets within the
// VIDEO_HARDWARE_STATE_HEADER structure that are used to save and
// restore the VGA's state.
//
#define VGA_HARDWARE_STATE_SIZE sizeof(VIDEO_HARDWARE_STATE_HEADER)
#define VGA_BASIC_SEQUENCER_OFFSET (VGA_HARDWARE_STATE_SIZE + 0)
#define VGA_BASIC_CRTC_OFFSET (VGA_BASIC_SEQUENCER_OFFSET + \
VGA_NUM_SEQUENCER_PORTS)
#define VGA_BASIC_GRAPH_CONT_OFFSET (VGA_BASIC_CRTC_OFFSET + \
VGA_NUM_CRTC_PORTS)
#define VGA_BASIC_ATTRIB_CONT_OFFSET (VGA_BASIC_GRAPH_CONT_OFFSET + \
VGA_NUM_GRAPH_CONT_PORTS)
#define VGA_BASIC_DAC_OFFSET (VGA_BASIC_ATTRIB_CONT_OFFSET + \
VGA_NUM_ATTRIB_CONT_PORTS)
#define VGA_BASIC_LATCHES_OFFSET (VGA_BASIC_DAC_OFFSET + \
(3 * VGA_NUM_DAC_ENTRIES))
#define VGA_EXT_SEQUENCER_OFFSET (VGA_BASIC_LATCHES_OFFSET + 4)
#define VGA_EXT_CRTC_OFFSET (VGA_EXT_SEQUENCER_OFFSET + \
EXT_NUM_SEQUENCER_PORTS)
#define VGA_EXT_GRAPH_CONT_OFFSET (VGA_EXT_CRTC_OFFSET + \
EXT_NUM_CRTC_PORTS)
#define VGA_EXT_ATTRIB_CONT_OFFSET (VGA_EXT_GRAPH_CONT_OFFSET +\
EXT_NUM_GRAPH_CONT_PORTS)
#define VGA_EXT_DAC_OFFSET (VGA_EXT_ATTRIB_CONT_OFFSET + \
EXT_NUM_ATTRIB_CONT_PORTS)
#define VGA_VALIDATOR_OFFSET (VGA_EXT_DAC_OFFSET + 4 * EXT_NUM_DAC_ENTRIES)
#define VGA_VALIDATOR_AREA_SIZE sizeof (ULONG) + (VGA_MAX_VALIDATOR_DATA * \
sizeof (VGA_VALIDATOR_DATA)) + \
sizeof (ULONG) + \
sizeof (ULONG) + \
sizeof (PVIDEO_ACCESS_RANGE)
#define VGA_MISC_DATA_AREA_OFFSET VGA_VALIDATOR_OFFSET + VGA_VALIDATOR_AREA_SIZE
#define VGA_MISC_DATA_AREA_SIZE 0
#define VGA_PLANE_0_OFFSET VGA_MISC_DATA_AREA_OFFSET + VGA_MISC_DATA_AREA_SIZE
#define VGA_PLANE_1_OFFSET VGA_PLANE_0_OFFSET + VGA_PLANE_SIZE
#define VGA_PLANE_2_OFFSET VGA_PLANE_1_OFFSET + VGA_PLANE_SIZE
#define VGA_PLANE_3_OFFSET VGA_PLANE_2_OFFSET + VGA_PLANE_SIZE
//
// Space needed to store all state data.
//
#define VGA_TOTAL_STATE_SIZE VGA_PLANE_3_OFFSET + VGA_PLANE_SIZE
//
// Device extension for the driver object. This data is only used
// locally, so this structure can be added to as needed.
//
typedef struct _HW_DEVICE_EXTENSION {
PHYSICAL_ADDRESS PhysicalVideoMemoryBase; // physical memory address and
PHYSICAL_ADDRESS PhysicalFrameOffset; // physical memory address and
ULONG PhysicalVideoMemoryLength; // length of display memory
ULONG PhysicalFrameLength; // length of display memory for
// the current mode.
PUCHAR IOAddress; // base I/O address of VGA ports
PUCHAR VideoMemoryAddress; // base virtual memory address of VGA memory
ULONG ModeIndex; // index of current mode in ModesVGA[]
PVIDEOMODE CurrentMode; // pointer to VIDEOMODE structure for
// current mode
VIDEO_CURSOR_POSITION CursorPosition; // current cursor position
UCHAR CursorEnable; // whether cursor is enabled or not
UCHAR CursorTopScanLine; // Cursor Start register setting (top scan)
UCHAR CursorBottomScanLine; // Cursor End register setting (bottom scan)
// eVb: 3.5 [VBE] - Add fields for VBE support and XP+ INT10 interface
VIDEO_PORT_INT10_INTERFACE Int10Interface;
BOOLEAN VesaBiosOk;
// eVb: 3.5 [END]
} HW_DEVICE_EXTENSION, *PHW_DEVICE_EXTENSION;
//
// Function prototypes.
//
//
// Entry points for the VGA validator. Used in VgaEmulatorAccessEntries[].
//
//
// Vga init scripts for font loading
//
extern USHORT EnableA000Data[];
extern USHORT DisableA000Color[];
//
// Mode Information
//
extern ULONG NumVideoModes;
extern VIDEOMODE ModesVGA[];
extern PVIDEOMODE VgaModeList;
// eVb: 3.5 [VGA] - Add ATI/Mach64 Access Range
#define NUM_VGA_ACCESS_RANGES 5
// eVb: 3.5 [END]
extern VIDEO_ACCESS_RANGE VgaAccessRange[];
/* VESA Bios Magic number */
#define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24))
#include "vbe.h"
#endif /* _VGA_NEW_PCH_ */