AUTOCHECKBOX "&Do not attempt failed lines in the future", 1030, 38, 226, 222, 10
DEFPUSHBUTTON "מסכים", 1, 135, 242, 60, 14
PUSHBUTTON "נתק", 2, 201, 242, 60, 14
LTEXT "If only a single line connected, the server may not be configured to accept multi-link calls. Check 'Do not attempt failed lines' to avoid unnecessary connection charges in such a case.", -1, 37, 36, 224, 44
AUTOCHECKBOX "&For MS-CHAP based protocols, automatically use my ReactOS logon name and password (and domain if any)", 1549, 28, 195, 213, 24, BS_TOP | BS_MULTILINE
LTEXT "To check the status of this connection or disconnect, right-click its icon in the Network Connections folder, or click its icon on the taskbar (if present).", -1, 40, 30, 212, 34
LTEXT "You have 'Set By Caller' callback privilege on the server. Press OK and the server will call you back at the number below. Press Cancel to skip callback.", 1066, 5, 5, 221, 39, SS_NOPREFIX
LTEXT "&Enter your modem's phone number:", 1067, 5, 46, 222, 8, NOT WS_GROUP
LTEXT "You have connections to a NetWare compatible network. These connections will be closed when the PPP IPX connection is established.", 1279, 42, 7, 215, 37
LTEXT "Before dialing, to avoid data loss, either close all files using these connections or uncheck IPX on this entry's Network Protocol settings.", 1280, 42, 46, 215, 38, NOT WS_GROUP
AUTOCHECKBOX "&Do not display this message in the future", 1277, 42, 86, 215, 10, BS_TOP | BS_MULTILINE | WS_GROUP
LTEXT "Pick up the handset and dial (or ask the operator to dial). After dialing is complete, click OK. Listen to handset until silent, and then hang up.", 1281, 8, 8, 219, 32
LTEXT "If you are disconnected from a network, autodial attempts to connect to a network whenever you try to access remote information.", -1, 7, 4, 219, 32
LTEXT "&Enable autodial by location:", 1006, 8, 42, 213, 8
LTEXT "These preferences apply to 'Login using Dial-Up Networking' at Ctrl-Alt-Del login. You, as an administrator, have access to this sheet.", 1007, 7, 4, 221, 40, NOT WS_GROUP
LTEXT "&Number of redial attempts:", 1005, 7, 55, 154, 8
EDITTEXT 1001, 164, 52, 60, 14, ES_AUTOHSCROLL
LTEXT "&Seconds between redial attempts:", 1009, 7, 73, 156, 8, NOT WS_GROUP
EDITTEXT 1003, 164, 70, 60, 14, ES_AUTOHSCROLL
LTEXT "I&dle seconds before hanging up:", 1008, 7, 91, 154, 8, NOT WS_GROUP
LTEXT "When you dial into a server, it may offer to call you back to reduce your phone charges. Specify whether you want callback. (Callback is not supported for virtual private network (VPN) connections.)", 1043, 8, 4, 219, 43
LTEXT "You need to set the dial-in credentials that remote routers will use when connecting to this interface. A user account will be created on this router with the information that you enter here.", 1094, 8, 5, 307, 35
LTEXT "שם משתמש:", 1078, 8, 47, 124, 8, NOT WS_GROUP
LTEXT "You need to set the dial out credentials that this interface will use when connecting to the remote router. These credentials must match the dial in credentials configured on the remote router.", 1094, 8, 5, 308, 33
LTEXT "שם משתמש:", 1096, 8, 43, 130, 8, NOT WS_GROUP
EDITTEXT 1091, 140, 40, 175, 12, ES_AUTOHSCROLL
LTEXT "שם מתחם:", 1093, 8, 63, 130, 8, NOT WS_GROUP
LTEXT "Select a name for this demand dial interface. A common practice is to name interfaces after the network or router to which they connect.", 1158, 7, 5, 309, 29
LTEXT "&Interface name:", 1159, 17, 41, 285, 8, NOT WS_GROUP
EDITTEXT 1157, 17, 53, 284, 12, ES_AUTOHSCROLL
AUTOCHECKBOX "I &know all about demand-dial interfaces and would rather edit the properties directly", 1156, 24, 100, 258, 31, BS_TOP | BS_MULTILINE | NOT WS_VISIBLE | WS_DISABLED
LTEXT "Enter the IP address of a DNS or WINS server on the remote network, or leave as 0.0.0.0 if you expect the remote router to provide them, or do not know.", 1275, 7, 2, 311, 25
LTEXT "&DNS server:", 1274, 7, 29, 160, 8, NOT WS_GROUP
CONTROL "", 1272, "RASIPADDRESS", WS_TABSTOP, 21, 41, 85, 12
LTEXT "&WINS server:", 1276, 7, 65, 166, 8, NOT WS_GROUP
CONTROL "", 1273, "RASIPADDRESS", WS_TABSTOP, 21, 77, 85, 12
LTEXT "Type the phone number below. ", -1, 7, 4, 306, 14
LTEXT "&Phone number:", 1308, 7, 19, 130, 8
EDITTEXT 1304, 7, 30, 304, 14, ES_AUTOHSCROLL
LTEXT "You might need to include a ""1"" or the area code, or both. If you are not sure you need the extra numbers, dial the phone number on your telephone. If you hear a modem sound, the number dialed is correct.", -1, 20, 50, 291, 53
LTEXT "Enter this router's IP address on the remote network or if you expect the remote router to provide the address, leave as 0.0.0.0. Usually the operator of the remote network or router will tell you what to use.", 1331, 5, 4, 308, 35
LTEXT "My &IP address:", 1332, 4, 51, 100, 8, NOT WS_GROUP
CONTROL "", 1330, "RASIPADDRESS", WS_TABSTOP, 21, 62, 104, 12
LTEXT "Note: If you have a network adapter installed, you should NOT choose the same address as your network adapter.", 1333, 5, 94, 306, 36, NOT WS_GROUP
LTEXT "Some dial-up servers and routers require an interactive login after connecting. You can run a script automatically to respond for you.", 1339, 5, 3, 309, 27
LTEXT "To create this interface and enable it on the router, click Finish.", 1354, 122, 41, 192, 26, NOT WS_GROUP
LTEXT "To edit this interface in the Routing and RemoteAccess Manager, select it in Routing Interfaces and press Properties.", 1355, 122, 68, 190, 39, NOT WS_GROUP
LTEXT "Enter the phone number of the dial-up server or router you are calling. Alternate phone numbers, if any, are dialed automatically if the primary number cannot be reached.", 1360, 7, 4, 305, 42
LTEXT "&Phone number or address:", 1361, 7, 50, 275, 8, NOT WS_GROUP
LTEXT "ReactOS was unable to connect to the network using the user name and password you provided. Please re-enter the user name and password.", 1396, 7, 6, 206, 36
LTEXT "&User name:", 1399, 8, 51, 49, 8
EDITTEXT 1394, 66, 46, 143, 14, ES_AUTOHSCROLL
LTEXT "&Password:", 1397, 8, 70, 49, 8, NOT WS_GROUP
LTEXT "ReactOS was unable to connect to the network using the user name and password you provided. Please re-enter the user name and password.", 1396, 7, 6, 209, 26
LTEXT "&User name:", 1399, 7, 72, 44, 8
EDITTEXT 1394, 97, 69, 115, 14, ES_AUTOHSCROLL
LTEXT "&Password:", 1397, 7, 90, 45, 8, NOT WS_GROUP
LTEXT "You can enter a domain name or leave the domain field empty.\n(Domain names are not required for connections to the Internet)", -1, 8, 38, 209, 26
LTEXT "When you dial into a router, it may offer to call you back to reduce your phone charges or to increase security. Specify whether you want callback or not.", 1043, 7, 5, 253, 24
LTEXT "Internet Connection Sharing allows other computers on your local network to access external resources through this connection.", -1, 10, 5, 300, 22
AUTOCHECKBOX "&Enable Internet Connection Sharing for this connection", 1512, 21, 31, 272, 10
LTEXT "To dial this connection automatically when a computer on your local network attempts to access external resources, select the following check box.", 1514, 10, 56, 294, 22
LTEXT "Shared access allows other computers on your local network to access external resources through this dial-up connection. You can enable shared access for one connection and one local network at a time.", -1, 10, 5, 300, 25
LTEXT "&Select the local network that will access resources through this connection:", -1, 21, 35, 285, 8
LTEXT "You can configure this connection to use your smart card to log you into the remote network. Select whether to use your smart card with this connection.", -1, 10, 5, 303, 22
LTEXT "The Internet connection on this computer has been customized to allow the following programs to run properly over your network:", -1, 7, 7, 218, 28
LTEXT "Type the name of your service in the following text box. If you leave the text box blank, ReactOS will automatically detect and configure your service when you connect.", -1, 10, 7, 301, 25
LTEXT "&Service name (optional):", -1, 22, 32, 229, 8
LTEXT "&Internet Control Message Protocol (ICMP) allows the computers on a network to share error and status information. Select the requests for information from the Internet that this computer will respond to:", -1, 7, 5, 215, 37
LTEXT "ReactOS can automatically dial the initial connection to the Internet or other public network, before establishing the virtual connection.", -1, 10, 6, 275, 24
AUTORADIOBUTTON "&Do not dial the initial connection.", 1509, 32, 31, 271, 10, BS_TOP | BS_MULTILINE | NOT WS_TABSTOP
AUTORADIOBUTTON "&Automatically dial this initial connection:", 1510, 32, 45, 269, 10, BS_TOP | BS_MULTILINE | NOT WS_TABSTOP
LTEXT "Type an ISP account name and password, then write down this information and store it in a safe place. (If you have forgotten an existing account name or password, contact your ISP.)", 1689, 10, 4, 308, 25
AUTOCHECKBOX "U&se this account name and password when anyone connects to the Internet from this computer", 1596, 23, 91, 291, 17, BS_LEFT | BS_TOP | BS_MULTILINE
AUTOCHECKBOX "&Make this the default Internet connection", 1595, 23, 112, 288, 14
AUTOCHECKBOX "&Turn on Internet Connection Firewall for this connection", 1682, 23, 133, 290, 14
LTEXT "Turning off the Internet Connection Firewall could expose your computer to unauthorized access over the Internet. Are you sure you want to turn it off?", -1, 44, 5, 212, 24
AUTOCHECKBOX "&Do not show this dialog again", 1662, 42, 40, 210, 10
AUTOCHECKBOX "Allo&w others to make private connections to my computer by tunneling through the Internet or other network", 7014, 17, 137, 195, 27, BS_TOP | BS_MULTILINE | WS_GROUP
AUTOCHECKBOX "&Show icon in notification area when connected", 7015, 12, 184, 209, 10, BS_TOP | BS_MULTILINE | WS_GROUP
AUTOCHECKBOX "Re&quire all users to secure their passwords and data.", 7048, 8, 151, 217, 12, BS_TOP | BS_MULTILINE
AUTOCHECKBOX "Al&ways allow directly connected devices such as palmtop computers to connect without providing a password.", 7049, 8, 169, 217, 23, BS_TOP | BS_MULTILINE
LTEXT "Note that other factors, such as a disabled user account, may affect a user's ability to connect.", -1, 9, 126, 212, 23
LTEXT "Select the check box next to each user who should be allowed a connection to this computer. Note that other factors, such as a disabled user account, may affect a user's ability to connect.", -1, 10, 1, 275, 27
LTEXT "&Users allowed to connect:", -1, 10, 28, 275, 8
LTEXT "Virtual private connections to your computer through the Internet are possible only if your computer has a known name or IP address on the Internet.", -1, 10, 4, 290, 20
AUTORADIOBUTTON "&Do not allow virtual private connections", 7054, 29, 78, 265, 10, BS_TOP | BS_MULTILINE | NOT WS_TABSTOP
LTEXT "Do you want to allow virtual private connections to this computer?", -1, 17, 49, 275, 8
LTEXT " If you allow VPN connections, ReactOS will modify the Internet Connection Firewall to allow your computer to send and receive VPN packets.", -1, 10, 25, 293, 25
188 "You (or a program) have requested information from %1. Which connection do you want to use?\0"
189 "Add Alternate Phone Number\0"
190 "Dial only first available device\0"
191 "Dial all devices\0"
192 "Dial devices only as needed\0"
193 "Enter a user name and password with access to the remote network domain.\0"
194 "Network Address Translation (NAT) is currently installed as a routing protocol,\nand must be removed before enabling Internet Connection Sharing.\nTo remove Network Address Translation, open the Routing and Remote Access Manager\nsnapin and expand the router's entry in the left pane.\nDelete the Network Address Translation routing protocol from the list of IP\nrouting protocols.\0"
195 "The area code must contain only the digits 0 to 9.\0"
196 "The entry name must contain at least one non-blank character and cannot begin with a period. Choose a different name.\0"
197 "You must choose a value from %1 to %2 for this field.\0"
198 "The custom authentication configuration DLL could not be loaded. Make sure the custom authentication package is correctly installed.\0"
199 "The connection selected was established by the Multiprotocol router.\nPlease use the 'Routing and RAS Admin' tool to hang up the connection.\0"
200 "Comment\0"
201 "The custom authentication package configuration failed.\0"
202 "TCP/IP is not installed or is disabled for Routing and Remote Access. In Control Panel, start Network, go to the Services page, choose 'Routing and Remote Access Service' Properties, and press the Network button.\0"
203 "IPX is not installed or is disabled for Routing and Remote Access. You can install/enable IPX by viewing the properties of any connection in ""Connections"" folder.\0"
204 "Remove the selected device(s) from the list?\0"
205 "Delete %1 from the phonebook?\0"
206 "Disconnect from %1?\0"
207 "A file named %1 already exists. Overwrite it?\0"
208 "Syntax errors were found in the script. Do you wish to view the error log?\0"
209 "'%1' is now connected. \0"
210 "Right-click the Dial-Up Networking Monitor on the task bar to hang up or check the status of your connection.\0"
212 "Connected successfully.\0"
213 "The custom authentication method selected must be initialized by pressing Properties.\0"
214 "lnk\0"
215 "Dial-up shortcut files (*.rnk)\0"
216 "*.rnk\0"
217 "Create Dial-Up Shortcut\0"
218 "Link to %1 failed. Reconnect pending...\0"
219 "Cannot retrieve framing information.\0"
220 "Cannot retrieve port information.\0"
221 "Cannot retrieve projection information.\0"
222 "Cannot load connection list.\0"
223 "Client:\0"
224 "Details\0"
225 "Device:\0"
226 "Network:\0"
227 "(not connected)\0"
228 "&Connect...\0"
229 "Hang &Up\0"
230 "Dial-up Connection\0"
231 "Modem configuration set to defaults\0"
232 "COM1\0"
233 "Remote Router\0"
234 "Modem or device\0"
235 "Please enter a username for this interface's account on the remote router.\0"
236 "An entry named %1 already exists. Choose a different name.\0"
237 "You may want to allow sending your password without encryption.\0"
238 "Password Encryption\0"
239 "The wizard is ready to create your connection.\0"
240 "Finished\0"
241 "Phone &number:\0"
242 "Call Me Back At\0"
243 "Edit Alternate Phone Number\0"
244 "Since this connection is currently active, some settings will not take effect until the next time you dial it.\0"
245 "There are no connections available to all users. You must logon before dialing.\0"
246 "The phonebook is empty.\n\nPress OK to add an entry.\0"
247 "Due to import/export restrictions, data encryption is not available in this version of ReactOS.\0"
248 "Please enter an X.25 address on the next screen.\0"
249 "Error %1: %2\0"
250 "%1\n\nError %2: %3\0"
251 "%1\n\nError %2: %3\nDiagnostic: %4\0"
252 "%1\n\nError %2: %3\nFail Code: %4\0"
253 "%1\n\nError %2: %3\n\nPress F1 for more information.\0"
254 "%1\n\nError %2: %3\nName: %4\0"
255 "%1\n\n%4\0"
256 "%1\n\nError %2: %3\nResponse: %4\0"
257 "Fail Code: 0x%1\n\0"
258 "Name: %1\n\0"
259 "%1 CP reported error %2: %3\n\0"
260 "%1 CP connected successfully.\n\0"
261 "You can choose which dial-up protocol to use.\0"
262 "Choose Dial-up Protocol\0"
263 "Press Finish to save '%1'.\0"
264 "netcfg.hlp\0"
265 "&Move successful number to the top of the list on connection\0"
266 "&New phone number:\0"
267 "&Phone numbers:\0"
268 "Phone Numbers\0"
269 "You may enter a fixed IP address.\0"
270 "IP Address\0"
271 "The Internet protocols (TCP/IP), are not installed or are disabled for Remote Access. In Control Panel, start Network, go to the Services page, choose 'Remote Access Service' Properties, and press the Network button.\0"
272 "TCP/IP\0"
273 "IPSec, default policy\0"
274 "IPX/SPX or compatible\0"
275 " (the current location)\0"
276 "ISDN\0"
277 "All available ISDN lines multi-linked\0"
278 "64K Digital\0"
279 "56K Digital\0"
280 "56K Voice\0"
281 "You may need a special procedure before connecting.\0"
282 "Choose Logon Options\0"
283 "%d%%\0"
284 "Phone number for %s\0"
285 "&New location:\0"
286 "&Locations:\0"
287 "Locations\0"
288 "This is the device that will be used to make the connection.\0"
289 "Select a Device\0"
290 "Multiple Lines cannot be bundled unless you are calling a PPP server.\0"
291 "Modem\0"
292 "The modem is not installed.\0"
293 "MS Point-to-Point Encryption, 128 bit RSA/RC4\0"
294 "MS Point-to-Point Encryption, 40 bit RSA/RC4\0"
295 "Multiple Lines\0"
296 "(Press Configure to set)\0"
297 "You may enter fixed DNS and WINS addresses.\0"
298 "Name Server Addresses\0"
299 "Down-level RAS\0"
300 "PPP\0"
301 "PPP multi-link\0"
302 "SLIP\0"
303 "NetBEUI\0"
304 "A personal phonebook has been created and initialized with the contents of the system phonebook.\0"
305 "No alternate phonebook is selected.\0"
306 "That device cannot be dynamically configured.\0"
307 "The entry cannot be deleted because it is connected.\0"
308 "No entry is selected. Press the New button to create an entry.\0"
309 "A non-zero IP address must be supplied when 'specify an IP address' is selected.\0"
310 "An X.25 Address is required when an X.25 dial-up network or X.25 device is selected.\0"
311 "(none)\0"
312 "'%1' is already in the list.\0"
313 "Secure my password and my data\0"
314 "The %1 protocol cannot be selected because it is not installed or is disabled for Remote Access. To change, in Control Panel start Network, choose Services page, Remote Access Properties, and press the Network button.\0"
315 "Cannot save password.\0"
316 "Cannot display data.\0"
317 "Cannot get auto-dial information.\0"
318 "Cannot load dialog.\0"
319 "Cannot disable shared access.\0"
320 "Cannot load property page.\0"
321 "Cannot load phonebook.\0"
322 "Cannot load RAS Manager port information.\0"
323 "Cannot read user preferences from registry.\0"
324 "Cannot load script information.\0"
325 "Cannot view script.log with notepad.exe\0"
326 "Cannot edit switch.inf with notepad.exe\0"
327 "Cannot load TAPI information.\0"
328 "Cannot load X.25 information.\0"
329 "Cannot create new phonebook.\0"
330 "Cannot enable shared access.\0"
331 "Cannot connect the phonebook entry.\0"
332 "Cannot get send/receive buffer.\0"
333 "Cannot get status information for a port.\0"
334 "Cannot retrieve protocol information.\0"
335 "Cannot receive buffer from device.\0"
336 "Cannot send buffer to device.\0"
337 "Cannot retrieve data.\0"
338 "Cannot save TAPI information.\0"
339 "Cannot save data.\0"
340 "The script has halted.\0"
341 "The script has halted due to an error. Do you wish to view the error log?\0"
342 "Cannot set auto-dial information.\0"
343 "Cannot delete saved password.\0"
344 "Cannot write phonebook.\0"
345 "Writing preferences to registry\0"
346 "Cannot write the shortcut file.\0"
347 "OK\0"
348 "What is your ISP's phone number?\0"
349 "Phone Number to Dial\0"
350 "The Password and Confirm password fields do not match.\0"
351 "The New Password and Confirm New Password fields do not match.\0"
352 "pbk\0"
353 "Phonebook files (*.pbk)\0"
354 "*.pbk\0"
355 "Open Phonebook\0"
356 "Clone Phonebook Entry\0"
357 "Edit Phonebook Entry\0"
358 "New Phonebook Entry\0"
359 "Phone number\0"
360 "Phone numbers\0"
361 "Network Connections\0"
362 "You must select at least one network protocol.\0"
363 "Before you can call PPP servers you must install a network protocol with the Control Network applet.\0"
364 "&New prefix:\0"
365 "&Prefixes:\0"
366 "Phone Number Prefixes\0"
367 "One or more requested network protocols did not connect successfully.\n\n\0"
368 "Press Accept to use the connection as is, or Hang Up to disconnect.\0"
369 "Point-to-point protocol settings to use when %1 initiates a demand dial connection on interface %2:\0"
370 "[To change the saved password, click here]\0"
405 "NetBEUI protocol is required to call older RAS servers.\0"
406 "Before you can call older RAS servers you must install the NetBEUI protocol. NetBEUI can be installed with the Control Panel Network applet.\0"
407 "&Redial\0"
408 "You have chosen to disable one or more transports. Doing so requires the routing managers and routing protocols for the disabled transports to be removed from this demand-dial interface.\nClick Yes if you want to conti \n \n\n\n\n\n\nnue, or No if you want to re-enable the transports.\0"
409 "Internet Connection Sharing\0"
410 "Demand-dial interface dial-in account.\0"
411 "You now need to set the dial-out credentials that interface '%1' will use when connecting to the remote router. These credentials must match the dial-in credentials configured on the remote router. When connecting to a \n \n\n\n\n\n\nWin NT4/2000 router, the user name must also match the interface name of the remote router.\0"
412 "mpradmin.hlp\0"
413 "&Move successful number or address to the top of the list on connection\0"
414 "&New phone number or address:\0"
415 "&Phone numbers or addresses:\0"
416 "Numbers and Addresses\0"
417 "PPP: Win 95/98/NT4/2000, Internet\0"
418 "None\0"
419 "SLIP: Unix Connection\0"
420 "All devices connected.\0"
421 "Receiving registration result...\0"
422 "Sending callback information...\0"
423 "Sending new password...\0"
424 "Calculating link speed...\0"
425 "Checking authentication status...\0"
426 "Registering your computer on the network...\0"
427 "Retrying authentication...\0"
428 "Verifying username and password...\0"
429 "Authenticated.\0"
430 "Connecting through %1...\0"
431 "Dialing...\0"
432 "Modems connecting...\0"
433 "Connecting over cable...\0"
434 "Dialing %1...\0"
435 "Connecting over X.25 to %1...\0"
436 "Postconnecting through %1...\0"
437 "Preconnecting through %1...\0"
438 "Connected.\0"
439 "Device connected.\0"
440 "Disconnected.\0"
441 "Modem connected.\0"
442 "Cable connected.\0"
443 "Opening port...\0"
444 "X.25 connected.\0"
445 "Port opened.\0"
446 "Postconnect complete.\0"
447 "Preconnect complete.\0"
448 "Preparing for callback...\0"
449 "Checking network protocol connections...\0"
450 "Verifying username and password...\0"
451 "Connected, bundling additional lines\0"
452 "Unknown state.\0"
453 "Waiting for callback...\0"
454 "Waiting for modem reset...\0"
455 "Make the phone number change permanent?\0"
456 "scp\0"
457 "*.scp\0"
458 "Dial-up script files (*.scp)\0"
459 "Browse Dial-Up Scripts\0"
460 "You must check at least one modem or adapter.\0"
461 "Phone number\0"
462 "TCP/IP protocol is required to call SLIP servers.\0"
463 "Before you can call SLIP servers you must install the TCP/IP protocol. TCP/IP can be installed with the Control Panel Network applet.\0"
464 "Status\0"
465 "&New suffix:\0"
466 "&Suffixes:\0"
467 "Phone Number Suffixes\0"
468 "You can go on to choose special settings, if necessary.\0"
469 "Custom Settings\0"
470 "Manual Modem Command Terminal\0"
471 "After Dial Terminal\0"
472 "Before Dial Terminal\0"
473 "SLIP Login Terminal\0"
474 "10 minutes\0"
475 "10 seconds\0"
476 "1 hour\0"
477 "1 minute\0"
478 "24 hours\0"
479 "2 hours\0"
480 "2 minutes\0"
481 "30 minutes\0"
482 "30 seconds\0"
483 "3 seconds\0"
484 "4 hours\0"
485 "4 minutes\0"
486 "5 minutes\0"
487 "5 seconds\0"
488 "8 hours\0"
489 "never\0"
490 "You can make the new connection available to any user or only to yourself.\0"
491 "Connection Availability\0"
492 "Discard multiple line settings for the entry?\0"
493 "Unavailable device\0"
494 "Logon Preferences\0"
495 "Dial-up Preferences\0"
496 "X.25\0"
497 "X.25 PAD\0"
498 "You can let other computers access resources through this dial-up connection.\0"
499 "VPN Server Selection\0"
500 "Cannot enable on-demand dialing.\0"
501 "What is the name or address of the VPN server?\0"
502 "Cannot disable on-demand dialing.\0"
503 "Public Network\0"
504 "ReactOS can make sure the public network is connected first.\0"
505 "VPN1\0"
506 "Internet Connection Sharing\0"
507 "You can let a local network access resources through this dial-up connection.\0"
508 "Host or Guest?\0"
509 "Internet Connection Sharing is currently enabled for connection '%1'.\n\nIt will now be enabled for connection '%2' instead.\0"
510 "To connect two computers, your computer must be identified as either a host or a guest.\0"
511 "When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP address 192.168.0.1. Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, you should set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing?\0"
512 "Select a Device\0"
513 "This is the device that will be used to make the connection.\0"
514 "&Connect\0"
515 "Let the server determine encryption\0"
516 "Always encrypt my data\0"
517 "Use MPPE-40 data encryption\0"
518 "Use MPPE-128 data encryption\0"
519 "The current encryption selection requires MS-CHAP or EAP authentication.\0"
520 "Custom Authentication Message\0"
521 "Connecting to %1...\0"
522 "Connection Name\0"
523 "Automatic\0"
524 "PPTP VPN\0"
525 "L2TP IPSec VPN\0"
526 "Select the type of the connection.\0"
527 "Type of Connection\0"
528 "hh.exe netcfg.chm::/trouble_all.htm\0"
529 "Virtual Private Connection\0"
530 "Use any form of authentication required including clear text. Do not encrypt data.\0"
531 "Use any form of authentication that requires passwords to be encrypted. Do not encrypt data.\0"
532 "Please type a name for the entry.\0"
533 "Encrypt passwords and data.\0"
534 "Please type a port number between 1 and 65535.\0"
535 "Specify custom authentication and data encryption with the Settings button.\0"
536 "Use any form of authentication that requires encrypted passwords. Do not encrypt data.\0"
537 "Encrypt passwords and data.\0"
538 "Specify custom authentication and data encryption with the Settings button.\0"
539 "The port number is already used by another entry.\nPlease enter a unique port number.\0"
540 "Please enter one or more ports for incoming responses.\0"
541 "Please select the entry to be deleted.\0"
542 "1 second\0"
543 "Please select the entry to be modified.\0"
549 "What is the name of the other computer you are connecting to?\0"
576 "20 minutes\0"
579 "Specify a name for this connection to your workplace.\0"
581 "Network Application Settings\0"
582 "Type a name for this connection in the following box.\0"
583 "Type the name of the other computer in the following box.\0"
584 "Type the name of your ISP in the following box.\0"
585 "What is the name of the service that provides your Internet connection?\0"
586 "Please type the IP address of the server computer on the private network.\0"
587 "Advanced Settings\0"
588 "The entry name begins with a period. or contains some invalid characters. \nChoose a different name.\0"
589 "Properties\0"
1512 "Communications Port\0"
1523 " channel\0"
1526 "Smart Cards\0"
1527 "You can use your smart card with this connection.\0"
1528 "Direct Connection\0"
1529 "Please select a device for this connection.\0"
1530 "Verdana Bold\0"
1531 "12\0"
1532 "Connection Type\0"
1533 "Select the type of demand dial interface you want to create.\0"
1534 "Select a device\0"
1535 "This is the device that will be used to make the connection.\0"
1536 "Phone Number\0"
1537 "Enter the phone number of the remote server or router you are calling.\0"
1538 "VPN Type\0"
1539 "Select the type of VPN interface you want to create.\0"
1540 "Destination Address\0"
1541 "What is the name or address of the remote router?\0"
1544 "IP Address\0"
1545 "Configure this router's IP address for this interface.\0"
1546 "Name Server Addresses\0"
1547 "Configure DNS and WINS addresses for use by this interface.\0"
1548 "Router Scripting\0"
1549 "You can set up a scripting for connecting to the remote router.\0"
1550 "Dial In Credentials\0"
1551 "Configure the user name and password that the remote router will use when it dials in to this server.\0"
1552 "Dial Out Credentials\0"
1553 "Configure the user name and password to be used when connecting to the remote router.\0"
1554 "Interface Name\0"
1555 "Select the name by which this new interface will be known.\0"
1556 "No available devices\0"
1557 "A user account named %1 already exists on the local computer. Should the demand dial interface be configured to use this user account?\0"
1558 "There are no security protocol settings for SLIP server connections.\0"
1559 "Allow unsecured password\0"
1560 "Require secured password\0"
1561 "Use smart card\0"
1562 "You must select at least one password authentication protocol.\0"
1563 "No encryption allowed (server will disconnect if it requires encryption)\0"
1564 "Optional encryption (connect even if no encryption)\0"
1565 "Require encryption (disconnect if server declines)\0"
1566 "Maximum strength encryption (disconnect if server declines)\0"
1567 " (encryption enabled)\0"
1568 "Internet Account Information\0"
1569 "You will need an account name and password to sign in to your Internet account.\0"
1570 "The selected EAP package does not provide encryption keys. Select an EAP package that does provide keys or select not to encrypt.\0"
1571 "The current encryption selection requires EAP or some version of MS-CHAP logon security methods.\0"
1572 "Protocols and Security\0"
1573 "Select transports and security options for this connection.\0"
1574 "The protocols you have selected include PAP, SPAP, and/or CHAP. If one of these is negotiated, data encryption will not occur. Do you want to keep these settings?\0"
1575 "To connect to '%1', you must first be connected to '%2'. Do you want to connect to '%2' now?\0"
1576 "Connecting over parallel cable...\0"
1577 "Connecting over infrared...\0"
1578 "Parallel cable connected.\0"
1579 "Infrared connected.\0"
1580 "This connection was configured to use a data encryption strength that is not supported by the installed software. The security properties of this connection have been reset to the available encryption strengths.\0"
1581 "Typ&e of VPN:\0"
1582 "Please enter a user name.\0"
1583 "This user name and password will be saved for your own use. There is already a user name and password saved for all other users of this connection. Do you want to delete the user name and password saved for all other users?\0"
1584 "For example, you could type the name of your workplace or the name of a server you will connect to.\0"
1585 "Account Information\0"
1586 "The controls on this property sheet are disabled because the system must first be rebooted before any configuration changes can be made.\0"
1587 "The controls on this property sheet are disabled because one or more other Network property sheets are already open. To use these controls, close all these property sheets and then reopen this one.\0"
1588 "Some of the controls on this property sheet are disabled because you do not have sufficient privileges to access them.\0"
1589 "The following message was received from your service provider:\r\n\r\n%1\0"
1590 "Reconnect %1\0"
1591 "Service Name\0"
1592 "What is the name of the service that provides your broadband connection?\0"
1593 "You will need an account name and password to sign on to your account\0"
1594 "PPPOE1-0\0"
1595 "Point-to-Point Protocol over Ethernet (PPPoE)\0"
1596 "Type of &broadband connection to make:\0"
1611 "Broadband Connection\0"
1612 "You have selected to use a preshared key but you have not entered one. \nPlease enter a preshared key.\0"
1613 "Cannot Commit Credentials\0"
1634 "Because the Windows Management Instrumentation (WMI) service has been disabled, ReactOS cannot display the properties of this connection or the home network.\n\nTo configure the properties of this connection or your home network, you must first enable the WMI service. To do this, in the Administrative Tools control panel, double-click Services, right-click Windows Management Instrumentation, and then click Start.\0"
1635 "ReactOS cannot display the properties of this connection. The Windows Management Instrumentation (WMI) information might be corrupted. To correct this, use System Restore to restore ReactOS to an earlier time (called a restore point). System Restore is located in the System Tools folder in Accessories.\0"
1646 "Allow incoming echo request\0"
1647 "Allow incoming timestamp request\0"
1648 "Allow incoming mask request\0"
1649 "Allow incoming router request\0"
1650 "Allow outgoing destination unreachable\0"
1651 "Allow outgoing source quench\0"
1652 "Allow outgoing parameter problem\0"
1653 "Allow outgoing time exceeded\0"
1654 "Allow redirect\0"
1655 "log\0"
1656 "*.log\0"
1657 "Firewall log files (*.log)\0"
1658 "Browse\0"
1663 "Select a private network connection\0"
1664 "To enable Internet Connection Sharing a connection must be selected for the private network. Please select a connection from the list of available connections.\0"
1665 "Messages sent to this computer will be repeated back to the sender. This is commonly used for troubleshooting, for example, to ping a machine.\0"
1666 "Data sent to this computer can be acknowledged with a confirmation message indicating the time that the data was received.\0"
1667 "This computer will listen for and respond to requests for more information about the public network to which it is attached.\0"
1668 "This computer will respond to requests for information about the routes it recognizes.\0"
1669 "Data sent over the Internet that fails to reach this computer due to an error will be discarded and acknowledged with a ""destination unreachable"" message explaining the failure.\0"
1670 "When this computer's ability to process incoming data cannot keep up with the rate of a transmission, data will be dropped and the sender will be asked to slow down.\0"
1671 "When this computer discards data it has received due to a problematic header, it will reply to the sender with a ""bad header"" error message.\0"
1672 "When this computer discards an incomplete data transmission because the entire transmission required more time than allowed, it will reply to the sender with a ""time expired"" message.\0"
1673 "Data sent from this computer will be rerouted if the default path changes.\0"
1675 "The value entered for the log file size is not valid. Enter a value between 1 and 32767 k.\0"
1685 "Your user account does not have permission to use this connection. Usually, this is because you are logged in as Guest.\0"
1686 "Type an account name and password. (If you have forgotten an existing account name or password, contact your network administrator.)\0"
1687 "Computer N&ame\0"
1688 "ISP N&ame\0"
1689 "Company N&ame\0"
1690 "What is the phone number you will use to make this connection?\n\0"
7301 "Incoming TCP/IP Properties\0"
7302 "You must choose a value from %1 to %2 for this field.\0"
7306 "Incoming Connections Error\0"
7307 "Incoming Connections General Error\0"
7308 "Incoming Connections\0"
7309 "Incoming Connections Networking Error\0"
7310 "Incoming Connections Multilink Status Error\0"
7321 "You must enter a logon name for the new user or press cancel.\0"
7322 "The password you entered was too short.\0"
7323 "The passwords entered are not the same. Please re-enter them.\0"
7324 "An internal error has occured. \0"
7325 "Listview\0"
7326 "An error has occurred while attempting to commit the changes you have made to the local user database. \0"
7327 "You have insufficient priveleges to add a user to the local system database. \0"
7328 "The user you are trying create already exists in the local user database.\0"
7329 "The user was not added to the local user database because the password you entered was rejected.\0"
7330 "Unable to reload the system user database because of an internal error.\0"
7331 "An internal error has occurred: The local user database handle is corrupt.\0"
7332 "Unable to load the resources neccessary to display the user tab.\0"
7333 "An internal error occured while attempting to rollback the changes you made to the local user database. \0"
7334 "The device database handle is corrupt.\0"
7335 "Unable to load the resources neccessary to display the general tab.\0"
7336 "An error has occurred while attempting to commit some of the device/vpn related changes you have made. \0"
7337 "An internal error occured.\0"
7338 "An internal error occurred: The networking component database handle is corrupt.\0"
7339 "An internal error has occurred. \0"
7340 "An error has occurred while attempting to commit the changes you have made to the networking components.\0"
7341 "An internal error occured.\0"
7342 "Unable to commit the changes you made to the TCP/IP protocol to the system. \0"
7343 "Unable to save the changes you made to the IPX protocol to the system. \0"
7344 "Unable to display the TCP/IP properties.\0"
7345 "Unable to display the IPX properties.\0"
7346 "Unable to load TCP/IP properties from the system. \0"
7347 "Unable to load IPX properties from the system. \0"
7348 "Incoming Connections depend on the Routing and Remote Access service which was unable to start. For more information, check the system event log.\0"
7349 "Unable to allow the editing of networking components at this time because they are currently being modified elsewhere.\0"
7350 "The new user you entered was not added to the local user database because the name or password entered violated a system policy (it was too large, too small, or ill-formed). \0"
7351 "The system is unable to delete the requested user. \0"
7352 "Unable to remove the selected network component because it is in use.\0"
7353 "Incoming Connections Warning\0"
7354 "Any users that you delete will be permanently removed from the system even if cancel is pressed. Are you sure you want to permanently remove %s? \0"
7355 "You are about to switch to a system management console. This Incoming Connections property sheet will be closed and any changes you may have made will be committed to the system. Is it ok to continue?\0"
7356 "Your Network Mask value has been changed. A zero bit in a mask can only be followed by other zero bits. For example, a Network Mask value, expressed in decimal dotted notation, of 255.255.0.0, is valid, but 255.0.255.0 is not. \n\0"
7357 "User Permissions\0"
7358 "You can specify the users who can connect to this computer.\0"
7359 "Devices for Incoming Connections\0"
7360 "You can choose the devices your computer uses to accept incoming connections.\0"
7377 "What device do you want to use to make this connection?\0"
7378 "No devices capable of accepting direct connections are currently installed.\0"
7379 "New Incoming Connection Warning\0"
7380 "Because this Win 2000 Server belongs to or controls a domain, you must use the Routing and Remote Access system console to configure this machine to receive incoming connections. Cancel changes and switch to this console?\n\0"
7381 "A&ssign network number automatically\0"
7382 "A&ssign network numbers automatically\0"
7383 "Incoming Connections can not issue the ipx network numbers 00000000 or FFFFFFFF. Please either change the assigned network numbers or use automatic network number assignment.\0"
7384 "to\0"
7385 "Communications Port (%s)\0"
7386 "Network Connections does not display some specialized options for inbound connections that have been set using the Local User Manager or Remote Access Policy consoles. For complete and correct information on incoming connections, you will need to use these consoles.\0"
7387 "The user callback mode you have selected requires you to enter a valid callback number.\0"
7388 "ReactOS must reboot to complete the operation. Is it ok to reboot now?\0"
7389 "The currently selected device has no configuration options available.\0"
7390 "Invalid Range\0"
7391 "You have requested that '%1' be disabled for Incoming Connections. In order to disable this, you must stop the 'Server' service. Once stopped, any shared directories or printers on this computer will no longer be available to any other computer. Do you want to bring up a system console that will allow you to stop the 'Server' service?\r\n\nUnder Computer Management, click System Tools and then click Services. In the right pane, right-click Server and click stop.\0"
7392 "This serial port is not enabled for use in a direct connection to another computer. It will be enabled after you complete this wizard. You can then configure the port speed and other properties by right-clicking the icon for this connection and selecting Properties.\n\0"
7393 "Incoming Connections\0"
7394 "The IP address pool you've entered is invalid.\0"
7395 "The mask provided is invalid.\0"
7396 "The start address entered for the TCP/IP pool is invalid. It must lie between 1.0.0.0 and 224.0.0.0 and it must not be in the form 127.x.x.x.\0"
7397 "The TCP/IP pool entered is invalid because the address is more specific than the mask.\0"
7398 "The start address must be less than the end address.\0"
7399 "The Routing and Remote Access Service is in the process of stopping. Until it stops, the Incoming Connections option is not available. Please wait a few moments and retry.\0"
7400 "%s (%s)\0"
7401 "%s (%d channels)\0"
7402 "Incoming Connection VPN (PPTP)\0"
7403 "Incoming Connection VPN (L2TP)\0"
7404 "IP Security (IKE)\0"
7405 "127.0.0.1\0"
7406 "You do not have sufficient privileges to set up Incoming Connections\0"
29900 "Cannot load the Remote Access Connection Manager service.\0"
29901 "Cannot load the file MPRAPI.DLL in the system32 directory.\0"
